! Started logfile: J0508+8432_S_2017_07_09_pus_uvs.log on Wed May 8 14:42:39 2019 obs J0508+8432_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0508+8432_S_2017_07_09_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.901852 visibilities/baseline/integration-bin. ! Found source: J0508+8432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1948 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0508+8432_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 7 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.782507Jy sigma=0.006813 ! Fit after self-cal, rms=0.776312Jy sigma=0.006760 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.479 mas, bmaj=10.18 mas, bpa=-51.4 degrees ! Estimated noise=2910.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175307 Jy ! Component: 100 - total flux cleaned = 0.213781 Jy ! Total flux subtracted in 100 components = 0.213781 Jy ! Clean residual min=-0.008847 max=0.012005 Jy/beam ! Clean residual mean=-0.000017 rms=0.002735 Jy/beam ! Combined flux in latest and established models = 0.213781 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.213781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082320Jy sigma=0.000694 ! Fit after self-cal, rms=0.082286Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.962 mas, bmaj=10.64 mas, bpa=-51.35 degrees ! Estimated noise=2140.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162551 Jy ! Component: 100 - total flux cleaned = 0.0236953 Jy ! Component: 150 - total flux cleaned = 0.0247796 Jy ! Component: 200 - total flux cleaned = 0.025763 Jy ! Total flux subtracted in 200 components = 0.025763 Jy ! Clean residual min=-0.006009 max=0.005874 Jy/beam ! Clean residual mean=0.000035 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 0.239544 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 38 components and 0.239544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078969Jy sigma=0.000667 ! Fit after self-cal, rms=0.078943Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.99 KP 1.02 ! LA 1.04 MK 1.01 NL 0.90 OV 1.03 ! PT 1.01 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 0.96 KP 1.03 ! LA 0.98 MK 1.08 NL 1.05 OV 1.00* ! PT 0.97 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.07 HN 1.03 KP 0.95 ! LA 0.97 MK 1.05 NL 1.03 OV 0.93 ! PT 0.97 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.02 KP 1.00* ! LA 0.99 MK 0.92 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.078943Jy sigma=0.000666 ! Fit after self-cal, rms=0.076145Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=10.66 mas, bpa=-51.46 degrees ! Estimated noise=2120.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000860751 Jy ! Component: 100 - total flux cleaned = 0.000797291 Jy ! Component: 150 - total flux cleaned = 0.000846285 Jy ! Component: 200 - total flux cleaned = 0.000927463 Jy ! Total flux subtracted in 200 components = 0.000927463 Jy ! Clean residual min=-0.004764 max=0.005599 Jy/beam ! Clean residual mean=0.000026 rms=0.001233 Jy/beam ! Combined flux in latest and established models = 0.240472 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.240472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076060Jy sigma=0.000649 ! Fit after self-cal, rms=0.076061Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076061Jy sigma=0.000649 ! Fit after self-cal, rms=0.076048Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.983 mas, bmaj=10.66 mas, bpa=-51.49 degrees ! Estimated noise=2120.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403947 Jy ! Component: 100 - total flux cleaned = 0.000440975 Jy ! Component: 150 - total flux cleaned = 0.000439904 Jy ! Component: 200 - total flux cleaned = 0.000465104 Jy ! Total flux subtracted in 200 components = 0.000465104 Jy ! Clean residual min=-0.004598 max=0.005390 Jy/beam ! Clean residual mean=0.000026 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.240937 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.240937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076019Jy sigma=0.000649 ! Fit after self-cal, rms=0.076020Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (90, -83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373096 Jy ! Component: 100 - total flux cleaned = 0.0048366 Jy ! Component: 150 - total flux cleaned = 0.00549315 Jy ! Component: 200 - total flux cleaned = 0.00591002 Jy ! Total flux subtracted in 200 components = 0.00591002 Jy ! Clean residual min=-0.004092 max=0.003915 Jy/beam ! Clean residual mean=0.000012 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.246847 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 98 components and 0.246847 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075695Jy sigma=0.000646 ! Fit after self-cal, rms=0.075680Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075680Jy sigma=0.000646 ! Fit after self-cal, rms=0.075393Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=10.66 mas, bpa=-51.49 degrees ! Estimated noise=2114.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000654492 Jy ! Component: 100 - total flux cleaned = 0.000771228 Jy ! Component: 150 - total flux cleaned = 0.000771548 Jy ! Component: 200 - total flux cleaned = 0.000771159 Jy ! Total flux subtracted in 200 components = 0.000771159 Jy ! Clean residual min=-0.003811 max=0.003955 Jy/beam ! Clean residual mean=0.000010 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 0.247618 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 120 components and 0.247618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075327Jy sigma=0.000645 ! Fit after self-cal, rms=0.075323Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000397539 Jy ! Component: 100 - total flux cleaned = -0.000359454 Jy ! Component: 150 - total flux cleaned = -0.000288511 Jy ! Component: 200 - total flux cleaned = -0.000189151 Jy ! Total flux subtracted in 200 components = -0.000189151 Jy ! Clean residual min=-0.003779 max=0.004003 Jy/beam ! Clean residual mean=0.000010 rms=0.000999 Jy/beam ! Combined flux in latest and established models = 0.247429 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 131 components and 0.247429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075293Jy sigma=0.000645 ! Fit after self-cal, rms=0.075292Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075292Jy sigma=0.000645 ! Fit after self-cal, rms=0.075198Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.289 mas, bmaj=13.09 mas, bpa=-58.22 degrees ! Estimated noise=2696.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39631e-05 Jy ! Component: 100 - total flux cleaned = -0.000161032 Jy ! Component: 150 - total flux cleaned = -0.000224394 Jy ! Component: 200 - total flux cleaned = -0.000254649 Jy ! Total flux subtracted in 200 components = -0.000254649 Jy ! Clean residual min=-0.003807 max=0.003805 Jy/beam ! Clean residual mean=0.000021 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 0.247174 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 146 components and 0.247174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075183Jy sigma=0.000645 ! Fit after self-cal, rms=0.075183Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.55272e-05 Jy ! Component: 100 - total flux cleaned = -2.42125e-05 Jy ! Component: 150 - total flux cleaned = -0.000104313 Jy ! Component: 200 - total flux cleaned = -0.000181031 Jy ! Total flux subtracted in 200 components = -0.000181031 Jy ! Clean residual min=-0.003851 max=0.003726 Jy/beam ! Clean residual mean=0.000020 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.246993 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 154 components and 0.246993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075176Jy sigma=0.000645 ! Fit after self-cal, rms=0.075176Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=10.66 mas, bpa=-51.5 degrees ! Estimated noise=2112.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.982 x 10.66 at -51.5 degrees (North through East) ! Clean map min=-0.0035701 max=0.22645 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=10.22 mas, bpa=-51.48 degrees ! Estimated noise=2872.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.172925 Jy ! Component: 100 - total flux cleaned = 0.210991 Jy ! Component: 150 - total flux cleaned = 0.223688 Jy ! Component: 200 - total flux cleaned = 0.231836 Jy ! Total flux subtracted in 200 components = 0.231836 Jy ! Clean residual min=-0.007019 max=0.007504 Jy/beam ! Clean residual mean=-0.000004 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.231836 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.231836 Jy ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=10.66 mas, bpa=-51.5 degrees ! Estimated noise=2112.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770271 Jy ! Component: 100 - total flux cleaned = 0.0112767 Jy ! Component: 150 - total flux cleaned = 0.0127203 Jy ! Component: 200 - total flux cleaned = 0.0141046 Jy ! Total flux subtracted in 200 components = 0.0141046 Jy ! Clean residual min=-0.004301 max=0.003803 Jy/beam ! Clean residual mean=0.000010 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.24594 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 48 components and 0.24594 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.289 mas, bmaj=13.09 mas, bpa=-58.22 degrees ! Estimated noise=2696.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154346 Jy ! Component: 100 - total flux cleaned = 0.00164336 Jy ! Component: 150 - total flux cleaned = 0.00158545 Jy ! Component: 200 - total flux cleaned = 0.00164364 Jy ! Total flux subtracted in 200 components = 0.00164364 Jy ! Clean residual min=-0.004091 max=0.004287 Jy/beam ! Clean residual mean=0.000020 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.247584 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.50148e-06 Jy ! Component: 100 - total flux cleaned = 4.92446e-06 Jy ! Component: 150 - total flux cleaned = 3.81497e-06 Jy ! Component: 200 - total flux cleaned = 1.71483e-06 Jy ! Total flux subtracted in 200 components = 1.71483e-06 Jy ! Clean residual min=-0.003856 max=0.004107 Jy/beam ! Clean residual mean=0.000019 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.247586 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 87 components and 0.247586 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.982 mas, bmaj=10.66 mas, bpa=-51.5 degrees ! Estimated noise=2112.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.29674e-06 Jy ! Component: 100 - total flux cleaned = 0.000423331 Jy ! Component: 150 - total flux cleaned = 0.000795224 Jy ! Component: 200 - total flux cleaned = 0.000851633 Jy ! Total flux subtracted in 200 components = 0.000851633 Jy ! Clean residual min=-0.003760 max=0.003966 Jy/beam ! Clean residual mean=0.000008 rms=0.001013 Jy/beam ! Combined flux in latest and established models = 0.248437 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.248437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075254Jy sigma=0.000645 ! Fit after self-cal, rms=0.075245Jy sigma=0.000645 wmodel J0508+8432_S_2017_07_09_pus_map.mod ! Writing 106 model components to file: J0508+8432_S_2017_07_09_pus_map.mod wobs J0508+8432_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0508+8432_S_2017_07_09_pus_uvs.fits wwins J0508+8432_S_2017_07_09_pus_map.win ! wwins: Wrote 2 windows to J0508+8432_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000184593 Jy ! Component: 100 - total flux cleaned = -0.000441793 Jy ! Component: 150 - total flux cleaned = -0.00074623 Jy ! Component: 200 - total flux cleaned = -0.00103518 Jy ! Component: 250 - total flux cleaned = -0.00147959 Jy ! Component: 300 - total flux cleaned = -0.00180133 Jy ! Component: 350 - total flux cleaned = -0.00195541 Jy ! Component: 400 - total flux cleaned = -0.0019054 Jy ! Component: 450 - total flux cleaned = -0.00200334 Jy ! Component: 500 - total flux cleaned = -0.00228626 Jy ! Component: 550 - total flux cleaned = -0.00246888 Jy ! Component: 600 - total flux cleaned = -0.0025134 Jy ! Component: 650 - total flux cleaned = -0.00277409 Jy ! Component: 700 - total flux cleaned = -0.00294197 Jy ! Component: 750 - total flux cleaned = -0.0031069 Jy ! Component: 800 - total flux cleaned = -0.00326778 Jy ! Component: 850 - total flux cleaned = -0.00342475 Jy ! Component: 900 - total flux cleaned = -0.00346238 Jy ! Component: 950 - total flux cleaned = -0.00349921 Jy ! Component: 1000 - total flux cleaned = -0.00360825 Jy ! Component: 1050 - total flux cleaned = -0.00375129 Jy ! Component: 1100 - total flux cleaned = -0.00389162 Jy ! Component: 1150 - total flux cleaned = -0.00409697 Jy ! Component: 1200 - total flux cleaned = -0.00423151 Jy ! Component: 1250 - total flux cleaned = -0.0042975 Jy ! Component: 1300 - total flux cleaned = -0.00439468 Jy ! Component: 1350 - total flux cleaned = -0.00436276 Jy ! Component: 1400 - total flux cleaned = -0.00430087 Jy ! Component: 1450 - total flux cleaned = -0.00427068 Jy ! Component: 1500 - total flux cleaned = -0.00424056 Jy ! Component: 1550 - total flux cleaned = -0.0042404 Jy ! Component: 1600 - total flux cleaned = -0.00412351 Jy ! Component: 1650 - total flux cleaned = -0.00406622 Jy ! Component: 1700 - total flux cleaned = -0.00401015 Jy ! Component: 1750 - total flux cleaned = -0.00412237 Jy ! Component: 1800 - total flux cleaned = -0.00403961 Jy ! Component: 1850 - total flux cleaned = -0.00398492 Jy ! Component: 1900 - total flux cleaned = -0.00403905 Jy ! Component: 1950 - total flux cleaned = -0.00403908 Jy ! Component: 2000 - total flux cleaned = -0.00396032 Jy ! Component: 2050 - total flux cleaned = -0.00393464 Jy ! Component: 2100 - total flux cleaned = -0.00390897 Jy ! Component: 2150 - total flux cleaned = -0.00395941 Jy ! Component: 2200 - total flux cleaned = -0.00395938 Jy ! Component: 2250 - total flux cleaned = -0.00390984 Jy ! Component: 2300 - total flux cleaned = -0.00393449 Jy ! Component: 2350 - total flux cleaned = -0.00395855 Jy ! Component: 2400 - total flux cleaned = -0.00391106 Jy ! Component: 2450 - total flux cleaned = -0.00391131 Jy ! Component: 2500 - total flux cleaned = -0.00395821 Jy ! Component: 2550 - total flux cleaned = -0.00400423 Jy ! Component: 2600 - total flux cleaned = -0.00393569 Jy ! Component: 2650 - total flux cleaned = -0.0040722 Jy ! Component: 2700 - total flux cleaned = -0.00404941 Jy ! Component: 2750 - total flux cleaned = -0.00404901 Jy ! Component: 2800 - total flux cleaned = -0.00407095 Jy ! Component: 2850 - total flux cleaned = -0.00402741 Jy ! Component: 2900 - total flux cleaned = -0.00413563 Jy ! Component: 2950 - total flux cleaned = -0.00409251 Jy ! Component: 3000 - total flux cleaned = -0.00409251 Jy ! Component: 3050 - total flux cleaned = -0.00411384 Jy ! Component: 3100 - total flux cleaned = -0.0041348 Jy ! Component: 3150 - total flux cleaned = -0.00417656 Jy ! Component: 3200 - total flux cleaned = -0.00425893 Jy ! Component: 3250 - total flux cleaned = -0.00434075 Jy ! Component: 3300 - total flux cleaned = -0.00442204 Jy ! Component: 3350 - total flux cleaned = -0.00444229 Jy ! Component: 3400 - total flux cleaned = -0.00442228 Jy ! Component: 3450 - total flux cleaned = -0.00448217 Jy ! Component: 3500 - total flux cleaned = -0.0045019 Jy ! Component: 3550 - total flux cleaned = -0.00452161 Jy ! Component: 3600 - total flux cleaned = -0.00452164 Jy ! Component: 3650 - total flux cleaned = -0.00454108 Jy ! Component: 3700 - total flux cleaned = -0.00450213 Jy ! Component: 3750 - total flux cleaned = -0.00452151 Jy ! Component: 3800 - total flux cleaned = -0.00450215 Jy ! Component: 3850 - total flux cleaned = -0.00448296 Jy ! Component: 3900 - total flux cleaned = -0.00448317 Jy ! Component: 3950 - total flux cleaned = -0.00454023 Jy ! Component: 4000 - total flux cleaned = -0.00454017 Jy ! Component: 4050 - total flux cleaned = -0.00454017 Jy ! Total flux subtracted in 4096 components = -0.00450255 Jy ! Clean residual min=-0.001281 max=0.001066 Jy/beam ! Clean residual mean=0.000002 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.243935 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 370 components and 0.243935 Jy ![Exited script file: muppet] wmap "J0508+8432_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.982 x 10.66 at -51.5 degrees (North through East) ! Clean map min=-0.00262 max=0.22485 Jy/beam ! Writing clean map to FITS file: J0508+8432_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.224848 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000324747 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.43329 0.43329 0.86658 1.73316 3.46632 6.93264 13.8653 27.7305 55.4611 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.224 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.982 x 10.66 at -51.5 degrees (North through East) ! Clean map min=-0.00262 max=0.22485 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0508+8432_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:42:44 2019