! Started logfile: J0508+8432_S_2017_05_01_pus_uvs.log on Wed May 1 18:27:44 2019 obs J0508+8432_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0508+8432_S_2017_05_01_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.836111 visibilities/baseline/integration-bin. ! Found source: J0508+8432 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 3612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0508+8432_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 115 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.774602Jy sigma=0.005525 ! Fit after self-cal, rms=0.770340Jy sigma=0.005497 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.619 mas, bmaj=4.024 mas, bpa=72.01 degrees ! Estimated noise=2433.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.187466 Jy ! Component: 100 - total flux cleaned = 0.231335 Jy ! Total flux subtracted in 100 components = 0.231335 Jy ! Clean residual min=-0.011258 max=0.015897 Jy/beam ! Clean residual mean=-0.000071 rms=0.002903 Jy/beam ! Combined flux in latest and established models = 0.231335 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.231335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253466Jy sigma=0.000740 ! Fit after self-cal, rms=0.253475Jy sigma=0.000739 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.164 mas, bmaj=4.675 mas, bpa=77.87 degrees ! Estimated noise=1858.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205407 Jy ! Component: 100 - total flux cleaned = 0.0307481 Jy ! Component: 150 - total flux cleaned = 0.0361502 Jy ! Component: 200 - total flux cleaned = 0.037332 Jy ! Total flux subtracted in 200 components = 0.037332 Jy ! Clean residual min=-0.009605 max=0.008646 Jy/beam ! Clean residual mean=0.000020 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.268667 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 25 components and 0.268667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.248636Jy sigma=0.000724 ! Fit after self-cal, rms=0.248634Jy sigma=0.000723 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.97 KP 1.06 ! LA 1.05 MK 1.02 NL 0.99 OV 1.02 ! PT 1.02 SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.02 HN 1.15 KP 1.00 ! LA 0.96 MK 1.16 NL 1.04 OV 0.95 ! PT 0.99 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.04 KP 0.97 ! LA 0.99 MK 1.10 NL 0.99 OV 0.99 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00 HN 0.97 KP 1.00* ! LA 1.05 MK 1.02 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.248634Jy sigma=0.000723 ! Fit after self-cal, rms=0.241023Jy sigma=0.000715 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.165 mas, bmaj=4.705 mas, bpa=77.27 degrees ! Estimated noise=1896.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472583 Jy ! Component: 100 - total flux cleaned = 0.00511669 Jy ! Component: 150 - total flux cleaned = 0.00534066 Jy ! Component: 200 - total flux cleaned = 0.00563103 Jy ! Total flux subtracted in 200 components = 0.00563103 Jy ! Clean residual min=-0.009383 max=0.007732 Jy/beam ! Clean residual mean=0.000005 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 0.274298 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.274298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240165Jy sigma=0.000715 ! Fit after self-cal, rms=0.240165Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240165Jy sigma=0.000715 ! Fit after self-cal, rms=0.105624Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.179 mas, bmaj=4.715 mas, bpa=76.8 degrees ! Estimated noise=1890.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232608 Jy ! Component: 100 - total flux cleaned = -0.00247561 Jy ! Component: 150 - total flux cleaned = -0.00265343 Jy ! Component: 200 - total flux cleaned = -0.00270112 Jy ! Total flux subtracted in 200 components = -0.00270112 Jy ! Clean residual min=-0.005325 max=0.004621 Jy/beam ! Clean residual mean=-0.000019 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.271597 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.271597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105483Jy sigma=0.000653 ! Fit after self-cal, rms=0.105430Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211054 Jy ! Component: 100 - total flux cleaned = -0.000249715 Jy ! Component: 150 - total flux cleaned = -0.000284238 Jy ! Component: 200 - total flux cleaned = -0.000283224 Jy ! Total flux subtracted in 200 components = -0.000283224 Jy ! Clean residual min=-0.005125 max=0.004618 Jy/beam ! Clean residual mean=-0.000021 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.271314 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.271314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105390Jy sigma=0.000652 ! Fit after self-cal, rms=0.105386Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105386Jy sigma=0.000652 ! Fit after self-cal, rms=0.105815Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.197 mas, bmaj=4.728 mas, bpa=78.94 degrees ! Estimated noise=1891.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157329 Jy ! Component: 100 - total flux cleaned = -0.00176882 Jy ! Component: 150 - total flux cleaned = -0.00180608 Jy ! Component: 200 - total flux cleaned = -0.00187033 Jy ! Total flux subtracted in 200 components = -0.00187033 Jy ! Clean residual min=-0.005011 max=0.004474 Jy/beam ! Clean residual mean=-0.000018 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.269443 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.269444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105755Jy sigma=0.000652 ! Fit after self-cal, rms=0.105755Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125912 Jy ! Component: 100 - total flux cleaned = -0.000179327 Jy ! Component: 150 - total flux cleaned = -0.000178705 Jy ! Component: 200 - total flux cleaned = -0.000177857 Jy ! Total flux subtracted in 200 components = -0.000177857 Jy ! Clean residual min=-0.004936 max=0.004474 Jy/beam ! Clean residual mean=-0.000019 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.269266 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.269266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105734Jy sigma=0.000651 ! Fit after self-cal, rms=0.105736Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105736Jy sigma=0.000651 ! Fit after self-cal, rms=0.106063Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.342 mas, bmaj=9.802 mas, bpa=85.81 degrees ! Estimated noise=2238.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000792825 Jy ! Component: 100 - total flux cleaned = -0.000870217 Jy ! Component: 150 - total flux cleaned = -0.000901208 Jy ! Component: 200 - total flux cleaned = -0.000926488 Jy ! Total flux subtracted in 200 components = -0.000926488 Jy ! Clean residual min=-0.005003 max=0.005670 Jy/beam ! Clean residual mean=-0.000031 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.268339 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.268339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106061Jy sigma=0.000651 ! Fit after self-cal, rms=0.106062Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000108765 Jy ! Component: 100 - total flux cleaned = 7.62152e-05 Jy ! Component: 150 - total flux cleaned = 5.84295e-05 Jy ! Component: 200 - total flux cleaned = 6.61434e-05 Jy ! Total flux subtracted in 200 components = 6.61434e-05 Jy ! Clean residual min=-0.005003 max=0.005663 Jy/beam ! Clean residual mean=-0.000030 rms=0.001384 Jy/beam ! Combined flux in latest and established models = 0.268405 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.268405 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106070Jy sigma=0.000651 ! Fit after self-cal, rms=0.106069Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.208 mas, bmaj=4.735 mas, bpa=80.57 degrees ! Estimated noise=1890.81 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.208 x 4.735 at 80.57 degrees (North through East) ! Clean map min=-0.0046913 max=0.2439 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.636 mas, bmaj=4.057 mas, bpa=75.23 degrees ! Estimated noise=2481.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.19089 Jy ! Component: 100 - total flux cleaned = 0.235338 Jy ! Component: 150 - total flux cleaned = 0.252633 Jy ! Component: 200 - total flux cleaned = 0.260895 Jy ! Total flux subtracted in 200 components = 0.260895 Jy ! Clean residual min=-0.007375 max=0.006058 Jy/beam ! Clean residual mean=-0.000021 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 0.260895 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.260895 Jy ! Inverting map and beam ! Estimated beam: bmin=4.208 mas, bmaj=4.735 mas, bpa=80.57 degrees ! Estimated noise=1890.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452306 Jy ! Component: 100 - total flux cleaned = 0.00495248 Jy ! Component: 150 - total flux cleaned = 0.00513324 Jy ! Component: 200 - total flux cleaned = 0.00529477 Jy ! Total flux subtracted in 200 components = 0.00529477 Jy ! Clean residual min=-0.005553 max=0.004594 Jy/beam ! Clean residual mean=-0.000025 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.26619 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.26619 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.342 mas, bmaj=9.802 mas, bpa=85.81 degrees ! Estimated noise=2238.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014229 Jy ! Component: 100 - total flux cleaned = 0.00158786 Jy ! Component: 150 - total flux cleaned = 0.00161163 Jy ! Component: 200 - total flux cleaned = 0.00164421 Jy ! Total flux subtracted in 200 components = 0.00164421 Jy ! Clean residual min=-0.004982 max=0.005706 Jy/beam ! Clean residual mean=-0.000036 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 0.267834 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.00975e-05 Jy ! Component: 100 - total flux cleaned = 2.96336e-05 Jy ! Component: 150 - total flux cleaned = 3.88713e-05 Jy ! Component: 200 - total flux cleaned = 4.72865e-05 Jy ! Total flux subtracted in 200 components = 4.72865e-05 Jy ! Clean residual min=-0.004987 max=0.005706 Jy/beam ! Clean residual mean=-0.000035 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 0.267882 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.267882 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.208 mas, bmaj=4.735 mas, bpa=80.57 degrees ! Estimated noise=1890.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000631922 Jy ! Component: 100 - total flux cleaned = -0.000692547 Jy ! Component: 150 - total flux cleaned = -0.00069178 Jy ! Component: 200 - total flux cleaned = -0.000743544 Jy ! Total flux subtracted in 200 components = -0.000743544 Jy ! Clean residual min=-0.005355 max=0.004345 Jy/beam ! Clean residual mean=-0.000021 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.267138 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.267138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106272Jy sigma=0.000652 ! Fit after self-cal, rms=0.106262Jy sigma=0.000652 wmodel J0508+8432_S_2017_05_01_pus_map.mod ! Writing 36 model components to file: J0508+8432_S_2017_05_01_pus_map.mod wobs J0508+8432_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0508+8432_S_2017_05_01_pus_uvs.fits wwins J0508+8432_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0508+8432_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00220773 Jy ! Component: 100 - total flux cleaned = -0.00337102 Jy ! Component: 150 - total flux cleaned = -0.00376533 Jy ! Component: 200 - total flux cleaned = -0.00384041 Jy ! Component: 250 - total flux cleaned = -0.00384115 Jy ! Component: 300 - total flux cleaned = -0.00377081 Jy ! Component: 350 - total flux cleaned = -0.00397828 Jy ! Component: 400 - total flux cleaned = -0.00397895 Jy ! Component: 450 - total flux cleaned = -0.00424288 Jy ! Component: 500 - total flux cleaned = -0.00430635 Jy ! Component: 550 - total flux cleaned = -0.00411689 Jy ! Component: 600 - total flux cleaned = -0.00411724 Jy ! Component: 650 - total flux cleaned = -0.00405624 Jy ! Component: 700 - total flux cleaned = -0.00405598 Jy ! Component: 750 - total flux cleaned = -0.00393954 Jy ! Component: 800 - total flux cleaned = -0.00382603 Jy ! Component: 850 - total flux cleaned = -0.00388204 Jy ! Component: 900 - total flux cleaned = -0.00371635 Jy ! Component: 950 - total flux cleaned = -0.00360827 Jy ! Component: 1000 - total flux cleaned = -0.00344897 Jy ! Component: 1050 - total flux cleaned = -0.00339746 Jy ! Component: 1100 - total flux cleaned = -0.00339737 Jy ! Component: 1150 - total flux cleaned = -0.00334614 Jy ! Component: 1200 - total flux cleaned = -0.00324557 Jy ! Component: 1250 - total flux cleaned = -0.00324599 Jy ! Component: 1300 - total flux cleaned = -0.00324635 Jy ! Component: 1350 - total flux cleaned = -0.00315052 Jy ! Component: 1400 - total flux cleaned = -0.00310347 Jy ! Component: 1450 - total flux cleaned = -0.00287114 Jy ! Component: 1500 - total flux cleaned = -0.00282546 Jy ! Component: 1550 - total flux cleaned = -0.00273503 Jy ! Component: 1600 - total flux cleaned = -0.002512 Jy ! Component: 1650 - total flux cleaned = -0.00242412 Jy ! Component: 1700 - total flux cleaned = -0.00229481 Jy ! Component: 1750 - total flux cleaned = -0.00212344 Jy ! Component: 1800 - total flux cleaned = -0.00199744 Jy ! Component: 1850 - total flux cleaned = -0.00199723 Jy ! Component: 1900 - total flux cleaned = -0.00195519 Jy ! Component: 1950 - total flux cleaned = -0.00183229 Jy ! Component: 2000 - total flux cleaned = -0.00171164 Jy ! Component: 2050 - total flux cleaned = -0.0016324 Jy ! Component: 2100 - total flux cleaned = -0.00147531 Jy ! Component: 2150 - total flux cleaned = -0.0012812 Jy ! Component: 2200 - total flux cleaned = -0.0010895 Jy ! Component: 2250 - total flux cleaned = -0.00105132 Jy ! Component: 2300 - total flux cleaned = -0.000863573 Jy ! Component: 2350 - total flux cleaned = -0.000751423 Jy ! Component: 2400 - total flux cleaned = -0.000640796 Jy ! Component: 2450 - total flux cleaned = -0.000313851 Jy ! Component: 2500 - total flux cleaned = -0.000313902 Jy ! Component: 2550 - total flux cleaned = -0.00017134 Jy ! Component: 2600 - total flux cleaned = -0.00013606 Jy ! Component: 2650 - total flux cleaned = -3.0971e-05 Jy ! Component: 2700 - total flux cleaned = 3.78367e-05 Jy ! Component: 2750 - total flux cleaned = 7.22145e-05 Jy ! Component: 2800 - total flux cleaned = 0.000275363 Jy ! Component: 2850 - total flux cleaned = 0.000274942 Jy ! Component: 2900 - total flux cleaned = 0.000341196 Jy ! Component: 2950 - total flux cleaned = 0.000472682 Jy ! Component: 3000 - total flux cleaned = 0.00047229 Jy ! Component: 3050 - total flux cleaned = 0.000633481 Jy ! Component: 3100 - total flux cleaned = 0.000696962 Jy ! Component: 3150 - total flux cleaned = 0.000760011 Jy ! Component: 3200 - total flux cleaned = 0.000917169 Jy ! Component: 3250 - total flux cleaned = 0.000948278 Jy ! Component: 3300 - total flux cleaned = 0.00104126 Jy ! Component: 3350 - total flux cleaned = 0.00116407 Jy ! Component: 3400 - total flux cleaned = 0.00125517 Jy ! Component: 3450 - total flux cleaned = 0.00131549 Jy ! Component: 3500 - total flux cleaned = 0.00131556 Jy ! Component: 3550 - total flux cleaned = 0.00146425 Jy ! Component: 3600 - total flux cleaned = 0.00152344 Jy ! Component: 3650 - total flux cleaned = 0.00166895 Jy ! Component: 3700 - total flux cleaned = 0.00166931 Jy ! Component: 3750 - total flux cleaned = 0.00178423 Jy ! Component: 3800 - total flux cleaned = 0.00184133 Jy ! Component: 3850 - total flux cleaned = 0.0018698 Jy ! Component: 3900 - total flux cleaned = 0.00201028 Jy ! Component: 3950 - total flux cleaned = 0.00203825 Jy ! Component: 4000 - total flux cleaned = 0.00212142 Jy ! Component: 4050 - total flux cleaned = 0.00223165 Jy ! Total flux subtracted in 4096 components = 0.00225894 Jy ! Clean residual min=-0.001586 max=0.001360 Jy/beam ! Clean residual mean=-0.000006 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.269397 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 294 components and 0.269397 Jy ![Exited script file: muppet] wmap "J0508+8432_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.208 x 4.735 at 80.57 degrees (North through East) ! Clean map min=-0.0040141 max=0.24462 Jy/beam ! Writing clean map to FITS file: J0508+8432_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.244619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000470396 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.576892 0.576892 1.15378 2.30757 4.61513 9.23027 18.4605 36.9211 73.8422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.244 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.208 x 4.735 at 80.57 degrees (North through East) ! Clean map min=-0.0040141 max=0.24462 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0508+8432_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:27:49 2019