! Started logfile: J0507+7912_S_2017_10_21_pus_uvs.log on Sat May 11 20:51:15 2019 obs J0507+7912_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0507+7912_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.958429 visibilities/baseline/integration-bin. ! Found source: J0507+7912 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 20012 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0507+7912_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 73 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 408 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 123 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 780 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003358Jy sigma=0.010013 ! Fit after self-cal, rms=0.964085Jy sigma=0.009644 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=4.399 mas, bpa=-22.43 degrees ! Estimated noise=1100.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029787 Jy ! Component: 100 - total flux cleaned = 0.0364103 Jy ! Total flux subtracted in 100 components = 0.0364103 Jy ! Clean residual min=-0.004258 max=0.003882 Jy/beam ! Clean residual mean=0.000013 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 0.0364103 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0364103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073265Jy sigma=0.000675 ! Fit after self-cal, rms=0.071732Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.089 mas, bmaj=5.575 mas, bpa=-25.69 degrees ! Estimated noise=633.165 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00438656 Jy ! Component: 100 - total flux cleaned = 0.00610613 Jy ! Component: 150 - total flux cleaned = 0.00651993 Jy ! Component: 200 - total flux cleaned = 0.0065688 Jy ! Total flux subtracted in 200 components = 0.0065688 Jy ! Clean residual min=-0.003835 max=0.002888 Jy/beam ! Clean residual mean=0.000003 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.0429791 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0429791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071444Jy sigma=0.000657 ! Fit after self-cal, rms=0.071423Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.17 HN 1.01 KP 1.12 ! LA 1.17 MK 1.03 NL 0.96 OV 1.07 ! PT 0.82 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.11 HN 1.05 KP 1.12 ! LA 1.11 MK 0.95 NL 1.00* OV 1.23 ! PT 0.73 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.11 HN 1.09 KP 1.12 ! LA 0.94 MK 1.05 NL 1.17 OV 1.05 ! PT 0.71 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.88 KP 1.00* ! LA 0.82 MK 0.92 NL 1.00* OV 1.00* ! PT 0.62 ! ! ! Fit before self-cal, rms=0.071423Jy sigma=0.000657 ! Fit after self-cal, rms=0.072430Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.085 mas, bmaj=5.518 mas, bpa=-25.94 degrees ! Estimated noise=638.302 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111871 Jy ! Component: 100 - total flux cleaned = 0.000110847 Jy ! Component: 150 - total flux cleaned = 0.000110964 Jy ! Component: 200 - total flux cleaned = 0.000110813 Jy ! Total flux subtracted in 200 components = 0.000110813 Jy ! Clean residual min=-0.001766 max=0.001971 Jy/beam ! Clean residual mean=-0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0430899 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.0430899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072414Jy sigma=0.000650 ! Fit after self-cal, rms=0.072977Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072977Jy sigma=0.000647 ! Fit after self-cal, rms=0.075110Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.107 mas, bmaj=5.591 mas, bpa=-25.26 degrees ! Estimated noise=643.398 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.70239e-06 Jy ! Component: 100 - total flux cleaned = -1.65565e-05 Jy ! Component: 150 - total flux cleaned = -1.59034e-05 Jy ! Component: 200 - total flux cleaned = -1.58244e-05 Jy ! Total flux subtracted in 200 components = -1.58244e-05 Jy ! Clean residual min=-0.001596 max=0.001856 Jy/beam ! Clean residual mean=-0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.0430741 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 0.0430741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075105Jy sigma=0.000645 ! Fit after self-cal, rms=0.075676Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.50393e-05 Jy ! Component: 100 - total flux cleaned = -7.98148e-05 Jy ! Component: 150 - total flux cleaned = -7.93614e-05 Jy ! Component: 200 - total flux cleaned = -7.13139e-05 Jy ! Total flux subtracted in 200 components = -7.13139e-05 Jy ! Clean residual min=-0.001837 max=0.001697 Jy/beam ! Clean residual mean=0.000001 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.0430027 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.0430027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075668Jy sigma=0.000644 ! Fit after self-cal, rms=0.075682Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075682Jy sigma=0.000644 ! Fit after self-cal, rms=0.078241Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.108 mas, bmaj=5.615 mas, bpa=-24.57 degrees ! Estimated noise=644.445 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.18222e-05 Jy ! Component: 100 - total flux cleaned = -6.63422e-05 Jy ! Component: 150 - total flux cleaned = -6.61078e-05 Jy ! Component: 200 - total flux cleaned = -6.62546e-05 Jy ! Total flux subtracted in 200 components = -6.62546e-05 Jy ! Clean residual min=-0.001587 max=0.001802 Jy/beam ! Clean residual mean=-0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.0429365 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 40 components and 0.0429365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078236Jy sigma=0.000644 ! Fit after self-cal, rms=0.078587Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.06553e-05 Jy ! Component: 100 - total flux cleaned = -4.77428e-05 Jy ! Component: 150 - total flux cleaned = -4.71996e-05 Jy ! Component: 200 - total flux cleaned = -5.43851e-05 Jy ! Total flux subtracted in 200 components = -5.43851e-05 Jy ! Clean residual min=-0.001709 max=0.001655 Jy/beam ! Clean residual mean=0.000000 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.0428821 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 47 components and 0.0428821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078581Jy sigma=0.000643 ! Fit after self-cal, rms=0.078593Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078593Jy sigma=0.000643 ! Fit after self-cal, rms=0.080395Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.174 mas, bmaj=10.63 mas, bpa=-50.48 degrees ! Estimated noise=773.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000235175 Jy ! Component: 100 - total flux cleaned = -0.00024853 Jy ! Component: 150 - total flux cleaned = -0.000258963 Jy ! Component: 200 - total flux cleaned = -0.00026755 Jy ! Total flux subtracted in 200 components = -0.00026755 Jy ! Clean residual min=-0.001888 max=0.001999 Jy/beam ! Clean residual mean=-0.000003 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0426145 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.0426145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080391Jy sigma=0.000643 ! Fit after self-cal, rms=0.080626Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104905 Jy ! Component: 100 - total flux cleaned = -9.21272e-05 Jy ! Component: 150 - total flux cleaned = -8.16808e-05 Jy ! Component: 200 - total flux cleaned = -7.35234e-05 Jy ! Total flux subtracted in 200 components = -7.35234e-05 Jy ! Clean residual min=-0.002056 max=0.002079 Jy/beam ! Clean residual mean=-0.000001 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.042541 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.042541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080624Jy sigma=0.000643 ! Fit after self-cal, rms=0.080627Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=5.621 mas, bpa=-24.13 degrees ! Estimated noise=645.396 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 5.621 at -24.13 degrees (North through East) ! Clean map min=-0.0015853 max=0.038878 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=4.489 mas, bpa=-18.56 degrees ! Estimated noise=1083.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294628 Jy ! Component: 100 - total flux cleaned = 0.0368946 Jy ! Component: 150 - total flux cleaned = 0.0401082 Jy ! Component: 200 - total flux cleaned = 0.0409994 Jy ! Total flux subtracted in 200 components = 0.0409994 Jy ! Clean residual min=-0.002450 max=0.002373 Jy/beam ! Clean residual mean=0.000001 rms=0.000619 Jy/beam ! Combined flux in latest and established models = 0.0409994 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0409994 Jy ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=5.621 mas, bpa=-24.13 degrees ! Estimated noise=645.396 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126735 Jy ! Component: 100 - total flux cleaned = 0.00145672 Jy ! Component: 150 - total flux cleaned = 0.00155687 Jy ! Component: 200 - total flux cleaned = 0.00160939 Jy ! Total flux subtracted in 200 components = 0.00160939 Jy ! Clean residual min=-0.001644 max=0.001642 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0426088 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.0426088 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.174 mas, bmaj=10.63 mas, bpa=-50.48 degrees ! Estimated noise=773.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.39388e-05 Jy ! Component: 100 - total flux cleaned = 4.25287e-05 Jy ! Component: 150 - total flux cleaned = 2.59949e-05 Jy ! Component: 200 - total flux cleaned = 3.34124e-06 Jy ! Total flux subtracted in 200 components = 3.34124e-06 Jy ! Clean residual min=-0.001990 max=0.001996 Jy/beam ! Clean residual mean=-0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0426121 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.66279e-06 Jy ! Component: 100 - total flux cleaned = -1.60447e-05 Jy ! Component: 150 - total flux cleaned = -2.23843e-05 Jy ! Component: 200 - total flux cleaned = -3.38265e-05 Jy ! Total flux subtracted in 200 components = -3.38265e-05 Jy ! Clean residual min=-0.001983 max=0.002005 Jy/beam ! Clean residual mean=-0.000001 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0425783 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 41 components and 0.0425783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.112 mas, bmaj=5.621 mas, bpa=-24.13 degrees ! Estimated noise=645.396 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.03469e-05 Jy ! Component: 100 - total flux cleaned = -7.37983e-05 Jy ! Component: 150 - total flux cleaned = -8.78929e-05 Jy ! Component: 200 - total flux cleaned = -7.81916e-05 Jy ! Total flux subtracted in 200 components = -7.81916e-05 Jy ! Clean residual min=-0.001660 max=0.001671 Jy/beam ! Clean residual mean=-0.000001 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0425001 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0425001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080620Jy sigma=0.000643 ! Fit after self-cal, rms=0.080631Jy sigma=0.000643 wmodel J0507+7912_S_2017_10_21_pus_map.mod ! Writing 50 model components to file: J0507+7912_S_2017_10_21_pus_map.mod wobs J0507+7912_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0507+7912_S_2017_10_21_pus_uvs.fits wwins J0507+7912_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0507+7912_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.4601e-05 Jy ! Component: 100 - total flux cleaned = 2.91216e-05 Jy ! Component: 150 - total flux cleaned = -4.71764e-05 Jy ! Component: 200 - total flux cleaned = -0.000218791 Jy ! Component: 250 - total flux cleaned = -0.000243033 Jy ! Component: 300 - total flux cleaned = -0.0003118 Jy ! Component: 350 - total flux cleaned = -0.000334241 Jy ! Component: 400 - total flux cleaned = -0.000334532 Jy ! Component: 450 - total flux cleaned = -0.000417718 Jy ! Component: 500 - total flux cleaned = -0.000458005 Jy ! Component: 550 - total flux cleaned = -0.000477802 Jy ! Component: 600 - total flux cleaned = -0.00043935 Jy ! Component: 650 - total flux cleaned = -0.000439551 Jy ! Component: 700 - total flux cleaned = -0.000365459 Jy ! Component: 750 - total flux cleaned = -0.000292791 Jy ! Component: 800 - total flux cleaned = -0.0002573 Jy ! Component: 850 - total flux cleaned = -0.000239756 Jy ! Component: 900 - total flux cleaned = -0.000205177 Jy ! Component: 950 - total flux cleaned = -0.000154288 Jy ! Component: 1000 - total flux cleaned = -0.000121459 Jy ! Component: 1050 - total flux cleaned = -7.22336e-05 Jy ! Component: 1100 - total flux cleaned = -3.99243e-05 Jy ! Component: 1150 - total flux cleaned = 7.57085e-06 Jy ! Component: 1200 - total flux cleaned = 3.87621e-05 Jy ! Component: 1250 - total flux cleaned = 6.94057e-05 Jy ! Component: 1300 - total flux cleaned = 0.000130134 Jy ! Component: 1350 - total flux cleaned = 0.000129857 Jy ! Component: 1400 - total flux cleaned = 0.000115172 Jy ! Component: 1450 - total flux cleaned = 0.000115171 Jy ! Component: 1500 - total flux cleaned = 0.000172953 Jy ! Component: 1550 - total flux cleaned = 0.000144734 Jy ! Component: 1600 - total flux cleaned = 0.000158985 Jy ! Component: 1650 - total flux cleaned = 0.000200597 Jy ! Component: 1700 - total flux cleaned = 0.000173149 Jy ! Component: 1750 - total flux cleaned = 0.000186835 Jy ! Component: 1800 - total flux cleaned = 0.000213828 Jy ! Component: 1850 - total flux cleaned = 0.000187421 Jy ! Component: 1900 - total flux cleaned = 0.000200585 Jy ! Component: 1950 - total flux cleaned = 0.00021353 Jy ! Component: 2000 - total flux cleaned = 0.000213419 Jy ! Component: 2050 - total flux cleaned = 0.000238727 Jy ! Component: 2100 - total flux cleaned = 0.00023879 Jy ! Component: 2150 - total flux cleaned = 0.000263463 Jy ! Component: 2200 - total flux cleaned = 0.000287897 Jy ! Component: 2250 - total flux cleaned = 0.0003481 Jy ! Component: 2300 - total flux cleaned = 0.000312381 Jy ! Component: 2350 - total flux cleaned = 0.000383356 Jy ! Component: 2400 - total flux cleaned = 0.000418473 Jy ! Component: 2450 - total flux cleaned = 0.000395542 Jy ! Component: 2500 - total flux cleaned = 0.000407093 Jy ! Component: 2550 - total flux cleaned = 0.000418507 Jy ! Component: 2600 - total flux cleaned = 0.000418495 Jy ! Component: 2650 - total flux cleaned = 0.00044098 Jy ! Component: 2700 - total flux cleaned = 0.000463004 Jy ! Component: 2750 - total flux cleaned = 0.000452063 Jy ! Component: 2800 - total flux cleaned = 0.000473894 Jy ! Component: 2850 - total flux cleaned = 0.000484662 Jy ! Component: 2900 - total flux cleaned = 0.00052734 Jy ! Component: 2950 - total flux cleaned = 0.00052735 Jy ! Component: 3000 - total flux cleaned = 0.000527295 Jy ! Component: 3050 - total flux cleaned = 0.000537608 Jy ! Component: 3100 - total flux cleaned = 0.000537516 Jy ! Component: 3150 - total flux cleaned = 0.000547836 Jy ! Component: 3200 - total flux cleaned = 0.000537634 Jy ! Component: 3250 - total flux cleaned = 0.000578238 Jy ! Component: 3300 - total flux cleaned = 0.000548127 Jy ! Component: 3350 - total flux cleaned = 0.000598187 Jy ! Component: 3400 - total flux cleaned = 0.000588277 Jy ! Component: 3450 - total flux cleaned = 0.000608091 Jy ! Component: 3500 - total flux cleaned = 0.000617923 Jy ! Component: 3550 - total flux cleaned = 0.000666404 Jy ! Component: 3600 - total flux cleaned = 0.000656795 Jy ! Component: 3650 - total flux cleaned = 0.00065689 Jy ! Component: 3700 - total flux cleaned = 0.00069491 Jy ! Component: 3750 - total flux cleaned = 0.000694917 Jy ! Component: 3800 - total flux cleaned = 0.000685626 Jy ! Component: 3850 - total flux cleaned = 0.000722891 Jy ! Component: 3900 - total flux cleaned = 0.000741398 Jy ! Component: 3950 - total flux cleaned = 0.000732123 Jy ! Component: 4000 - total flux cleaned = 0.0007322 Jy ! Component: 4050 - total flux cleaned = 0.000732202 Jy ! Total flux subtracted in 4096 components = 0.00076843 Jy ! Clean residual min=-0.000462 max=0.000593 Jy/beam ! Clean residual mean=0.000000 rms=0.000159 Jy/beam ! Combined flux in latest and established models = 0.0432685 Jy keep ! Adding 254 model components to the UV plane model. ! The established model now contains 304 components and 0.0432685 Jy ![Exited script file: muppet] wmap "J0507+7912_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 5.621 at -24.13 degrees (North through East) ! Clean map min=-0.0013085 max=0.038671 Jy/beam ! Writing clean map to FITS file: J0507+7912_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0386712 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155819 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2088 1.2088 2.4176 4.8352 9.6704 19.3408 38.6816 77.3632 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.038 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.112 x 5.621 at -24.13 degrees (North through East) ! Clean map min=-0.0013085 max=0.038671 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0507+7912_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:51:19 2019