! Started logfile: J0505-0419_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:54 2019 obs J0505-0419_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0505-0419_S_2017_04_28_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.969125 visibilities/baseline/integration-bin. ! Found source: J0505-0419 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 19712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0505-0419_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.903029Jy sigma=0.092142 ! Fit after self-cal, rms=0.898952Jy sigma=0.092128 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.103 mas, bmaj=6.873 mas, bpa=-6.22 degrees ! Estimated noise=474.274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0400492 Jy ! Component: 100 - total flux cleaned = 0.0600172 Jy ! Total flux subtracted in 100 components = 0.0600172 Jy ! Clean residual min=-0.016806 max=0.019633 Jy/beam ! Clean residual mean=-0.000008 rms=0.005017 Jy/beam ! Combined flux in latest and established models = 0.0600172 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0600172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150346Jy sigma=0.003553 ! Fit after self-cal, rms=0.150164Jy sigma=0.003525 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.713 mas, bmaj=7.645 mas, bpa=-3.913 degrees ! Estimated noise=411.529 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170089 Jy ! Component: 100 - total flux cleaned = 0.0275895 Jy ! Component: 150 - total flux cleaned = 0.0298097 Jy ! Component: 200 - total flux cleaned = 0.0311896 Jy ! Total flux subtracted in 200 components = 0.0311896 Jy ! Clean residual min=-0.018524 max=0.016914 Jy/beam ! Clean residual mean=-0.000022 rms=0.008027 Jy/beam ! Combined flux in latest and established models = 0.0912068 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0912068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143952Jy sigma=0.004210 ! Fit after self-cal, rms=0.143642Jy sigma=0.004204 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.52 FD 0.68 HN 0.84 KP 0.79 ! LA 0.81 MK 1.02 NL 0.78 OV 0.78 ! PT 0.90 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.62 HN 0.87 KP 0.77 ! LA 0.82 MK 0.98 NL 0.93 OV 0.80 ! PT 0.88 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.52 FD 0.67 HN 0.84 KP 0.79 ! LA 0.82 MK 1.03 NL 0.85 OV 0.73 ! PT 0.85 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 9.51 FD 0.72 HN 1.06 KP 1.00* ! LA 11.27 MK 1.35 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.143642Jy sigma=0.004204 ! Fit after self-cal, rms=1.257438Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=7.906 mas, bpa=-1.179 degrees ! Estimated noise=521.499 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00191747 Jy ! Component: 100 - total flux cleaned = -0.00367077 Jy ! Component: 150 - total flux cleaned = -0.00501308 Jy ! Component: 200 - total flux cleaned = -0.00603583 Jy ! Total flux subtracted in 200 components = -0.00603583 Jy ! Clean residual min=-0.003270 max=0.003260 Jy/beam ! Clean residual mean=0.000007 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.085171 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 14 components and 0.085171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.256757Jy sigma=0.000696 ! Fit after self-cal, rms=1.255737Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.255737Jy sigma=0.000691 ! Fit after self-cal, rms=2.146674Jy sigma=0.000686 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.396 mas, bmaj=7.998 mas, bpa=-1.68 degrees ! Estimated noise=529.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000970917 Jy ! Component: 100 - total flux cleaned = -0.00159885 Jy ! Component: 150 - total flux cleaned = -0.0019627 Jy ! Component: 200 - total flux cleaned = -0.00206051 Jy ! Total flux subtracted in 200 components = -0.00206051 Jy ! Clean residual min=-0.002488 max=0.002544 Jy/beam ! Clean residual mean=0.000008 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.0831105 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 22 components and 0.0831105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.146315Jy sigma=0.000681 ! Fit after self-cal, rms=2.146080Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.72559e-05 Jy ! Component: 100 - total flux cleaned = -4.55408e-05 Jy ! Component: 150 - total flux cleaned = -0.000166188 Jy ! Component: 200 - total flux cleaned = -0.00021889 Jy ! Total flux subtracted in 200 components = -0.00021889 Jy ! Clean residual min=-0.002391 max=0.002456 Jy/beam ! Clean residual mean=0.000010 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0828916 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.0828916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.145929Jy sigma=0.000680 ! Fit after self-cal, rms=2.145937Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.145937Jy sigma=0.000680 ! Fit after self-cal, rms=0.081276Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.367 mas, bmaj=8.026 mas, bpa=-2.266 degrees ! Estimated noise=532.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000730786 Jy ! Component: 100 - total flux cleaned = -0.000790663 Jy ! Component: 150 - total flux cleaned = -0.000838456 Jy ! Component: 200 - total flux cleaned = -0.000917743 Jy ! Total flux subtracted in 200 components = -0.000917743 Jy ! Clean residual min=-0.001636 max=0.001652 Jy/beam ! Clean residual mean=0.000003 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0819738 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.0819738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081207Jy sigma=0.000668 ! Fit after self-cal, rms=0.080908Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.47889e-05 Jy ! Component: 100 - total flux cleaned = -0.000100019 Jy ! Component: 150 - total flux cleaned = -0.000222737 Jy ! Component: 200 - total flux cleaned = -0.000336177 Jy ! Total flux subtracted in 200 components = -0.000336177 Jy ! Clean residual min=-0.001600 max=0.001644 Jy/beam ! Clean residual mean=0.000004 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.0816376 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0816376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080876Jy sigma=0.000666 ! Fit after self-cal, rms=0.080882Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080882Jy sigma=0.000666 ! Fit after self-cal, rms=0.079514Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.407 mas, bmaj=12.66 mas, bpa=3.427 degrees ! Estimated noise=640.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00072412 Jy ! Component: 100 - total flux cleaned = 0.000767003 Jy ! Component: 150 - total flux cleaned = 0.000769673 Jy ! Component: 200 - total flux cleaned = 0.000756823 Jy ! Total flux subtracted in 200 components = 0.000756823 Jy ! Clean residual min=-0.001314 max=0.001670 Jy/beam ! Clean residual mean=0.000005 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0823944 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0823944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079505Jy sigma=0.000666 ! Fit after self-cal, rms=0.079451Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.85831e-07 Jy ! Component: 100 - total flux cleaned = -2.13257e-05 Jy ! Component: 150 - total flux cleaned = -4.78713e-05 Jy ! Component: 200 - total flux cleaned = -4.07218e-05 Jy ! Total flux subtracted in 200 components = -4.07218e-05 Jy ! Clean residual min=-0.001346 max=0.001675 Jy/beam ! Clean residual mean=0.000005 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.0823537 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.0823537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079455Jy sigma=0.000666 ! Fit after self-cal, rms=0.079456Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=8.027 mas, bpa=-2.491 degrees ! Estimated noise=533.457 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.342 x 8.027 at -2.491 degrees (North through East) ! Clean map min=-0.001484 max=0.070882 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.783 mas, bmaj=7.07 mas, bpa=-3.657 degrees ! Estimated noise=701.089 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583429 Jy ! Component: 100 - total flux cleaned = 0.0712342 Jy ! Component: 150 - total flux cleaned = 0.0750783 Jy ! Component: 200 - total flux cleaned = 0.0759299 Jy ! Total flux subtracted in 200 components = 0.0759299 Jy ! Clean residual min=-0.002215 max=0.004011 Jy/beam ! Clean residual mean=0.000002 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0759299 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0759299 Jy ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=8.027 mas, bpa=-2.491 degrees ! Estimated noise=533.457 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00325075 Jy ! Component: 100 - total flux cleaned = 0.00376561 Jy ! Component: 150 - total flux cleaned = 0.003935 Jy ! Component: 200 - total flux cleaned = 0.00402466 Jy ! Total flux subtracted in 200 components = 0.00402466 Jy ! Clean residual min=-0.001476 max=0.002629 Jy/beam ! Clean residual mean=0.000004 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0799546 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 27 components and 0.0799546 Jy ! Inverting map ! Added new window around map position (3.5, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.002159 Jy ! Component: 100 - total flux cleaned = 0.00250296 Jy ! Component: 150 - total flux cleaned = 0.00270033 Jy ! Component: 200 - total flux cleaned = 0.0028388 Jy ! Total flux subtracted in 200 components = 0.0028388 Jy ! Clean residual min=-0.001503 max=0.001346 Jy/beam ! Clean residual mean=0.000003 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.0827934 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.0827934 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.407 mas, bmaj=12.66 mas, bpa=3.427 degrees ! Estimated noise=640.487 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000360607 Jy ! Component: 100 - total flux cleaned = 0.000515395 Jy ! Component: 150 - total flux cleaned = 0.000614369 Jy ! Component: 200 - total flux cleaned = 0.000671257 Jy ! Total flux subtracted in 200 components = 0.000671257 Jy ! Clean residual min=-0.001342 max=0.001649 Jy/beam ! Clean residual mean=0.000005 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.0834646 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.80411e-05 Jy ! Component: 100 - total flux cleaned = 7.19585e-05 Jy ! Component: 150 - total flux cleaned = 8.24146e-05 Jy ! Component: 200 - total flux cleaned = 0.000113193 Jy ! Total flux subtracted in 200 components = 0.000113193 Jy ! Clean residual min=-0.001326 max=0.001640 Jy/beam ! Clean residual mean=0.000005 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0835778 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 80 components and 0.0835778 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.342 mas, bmaj=8.027 mas, bpa=-2.491 degrees ! Estimated noise=533.457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.62426e-05 Jy ! Component: 100 - total flux cleaned = 0.000117883 Jy ! Component: 150 - total flux cleaned = 0.000139405 Jy ! Component: 200 - total flux cleaned = 0.000138313 Jy ! Total flux subtracted in 200 components = 0.000138313 Jy ! Clean residual min=-0.001365 max=0.001304 Jy/beam ! Clean residual mean=0.000002 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.0837161 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 98 components and 0.0837161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079314Jy sigma=0.000664 ! Fit after self-cal, rms=0.079296Jy sigma=0.000664 wmodel J0505-0419_S_2017_04_28_pus_map.mod ! Writing 98 model components to file: J0505-0419_S_2017_04_28_pus_map.mod wobs J0505-0419_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0505-0419_S_2017_04_28_pus_uvs.fits wwins J0505-0419_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0505-0419_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000152262 Jy ! Component: 100 - total flux cleaned = -0.000222352 Jy ! Component: 150 - total flux cleaned = -0.000176871 Jy ! Component: 200 - total flux cleaned = -6.85296e-05 Jy ! Component: 250 - total flux cleaned = -5.45851e-06 Jy ! Component: 300 - total flux cleaned = 7.62812e-05 Jy ! Component: 350 - total flux cleaned = 7.59261e-05 Jy ! Component: 400 - total flux cleaned = 5.61549e-05 Jy ! Component: 450 - total flux cleaned = 7.50463e-05 Jy ! Component: 500 - total flux cleaned = -1.90838e-05 Jy ! Component: 550 - total flux cleaned = -5.59779e-05 Jy ! Component: 600 - total flux cleaned = -9.24213e-05 Jy ! Component: 650 - total flux cleaned = -0.000181628 Jy ! Component: 700 - total flux cleaned = -0.000251715 Jy ! Component: 750 - total flux cleaned = -0.000303686 Jy ! Component: 800 - total flux cleaned = -0.000355037 Jy ! Component: 850 - total flux cleaned = -0.000455759 Jy ! Component: 900 - total flux cleaned = -0.000538175 Jy ! Component: 950 - total flux cleaned = -0.0005544 Jy ! Component: 1000 - total flux cleaned = -0.000586615 Jy ! Component: 1050 - total flux cleaned = -0.000570824 Jy ! Component: 1100 - total flux cleaned = -0.000618218 Jy ! Component: 1150 - total flux cleaned = -0.000618256 Jy ! Component: 1200 - total flux cleaned = -0.000602897 Jy ! Component: 1250 - total flux cleaned = -0.00063315 Jy ! Component: 1300 - total flux cleaned = -0.000648192 Jy ! Component: 1350 - total flux cleaned = -0.000648223 Jy ! Component: 1400 - total flux cleaned = -0.000677416 Jy ! Component: 1450 - total flux cleaned = -0.000634025 Jy ! Component: 1500 - total flux cleaned = -0.00069157 Jy ! Component: 1550 - total flux cleaned = -0.000691501 Jy ! Component: 1600 - total flux cleaned = -0.000705607 Jy ! Component: 1650 - total flux cleaned = -0.000733599 Jy ! Component: 1700 - total flux cleaned = -0.000733482 Jy ! Component: 1750 - total flux cleaned = -0.000747049 Jy ! Component: 1800 - total flux cleaned = -0.000706412 Jy ! Component: 1850 - total flux cleaned = -0.00077353 Jy ! Component: 1900 - total flux cleaned = -0.000720207 Jy ! Component: 1950 - total flux cleaned = -0.000760028 Jy ! Component: 2000 - total flux cleaned = -0.000786297 Jy ! Component: 2050 - total flux cleaned = -0.000721478 Jy ! Component: 2100 - total flux cleaned = -0.000773166 Jy ! Component: 2150 - total flux cleaned = -0.00077312 Jy ! Component: 2200 - total flux cleaned = -0.000798255 Jy ! Component: 2250 - total flux cleaned = -0.000823431 Jy ! Component: 2300 - total flux cleaned = -0.000785898 Jy ! Component: 2350 - total flux cleaned = -0.000823374 Jy ! Component: 2400 - total flux cleaned = -0.000860081 Jy ! Component: 2450 - total flux cleaned = -0.000884533 Jy ! Component: 2500 - total flux cleaned = -0.000860363 Jy ! Component: 2550 - total flux cleaned = -0.000944726 Jy ! Component: 2600 - total flux cleaned = -0.000908931 Jy ! Component: 2650 - total flux cleaned = -0.000896933 Jy ! Component: 2700 - total flux cleaned = -0.000956022 Jy ! Component: 2750 - total flux cleaned = -0.000979365 Jy ! Component: 2800 - total flux cleaned = -0.000956182 Jy ! Component: 2850 - total flux cleaned = -0.000944628 Jy ! Component: 2900 - total flux cleaned = -0.000933013 Jy ! Component: 2950 - total flux cleaned = -0.000944569 Jy ! Component: 3000 - total flux cleaned = -0.000989954 Jy ! Component: 3050 - total flux cleaned = -0.000989985 Jy ! Component: 3100 - total flux cleaned = -0.00097883 Jy ! Component: 3150 - total flux cleaned = -0.000978696 Jy ! Component: 3200 - total flux cleaned = -0.00101198 Jy ! Component: 3250 - total flux cleaned = -0.00100097 Jy ! Component: 3300 - total flux cleaned = -0.00101188 Jy ! Component: 3350 - total flux cleaned = -0.00101173 Jy ! Component: 3400 - total flux cleaned = -0.00102258 Jy ! Component: 3450 - total flux cleaned = -0.00102253 Jy ! Component: 3500 - total flux cleaned = -0.00104387 Jy ! Component: 3550 - total flux cleaned = -0.00105447 Jy ! Component: 3600 - total flux cleaned = -0.00102278 Jy ! Component: 3650 - total flux cleaned = -0.00102281 Jy ! Component: 3700 - total flux cleaned = -0.0010332 Jy ! Component: 3750 - total flux cleaned = -0.00107477 Jy ! Component: 3800 - total flux cleaned = -0.00106432 Jy ! Component: 3850 - total flux cleaned = -0.00105415 Jy ! Component: 3900 - total flux cleaned = -0.00107461 Jy ! Component: 3950 - total flux cleaned = -0.00107462 Jy ! Component: 4000 - total flux cleaned = -0.00107471 Jy ! Component: 4050 - total flux cleaned = -0.0010545 Jy ! Total flux subtracted in 4096 components = -0.00105456 Jy ! Clean residual min=-0.000550 max=0.000547 Jy/beam ! Clean residual mean=0.000001 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0826616 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 405 components and 0.0826615 Jy ![Exited script file: muppet] wmap "J0505-0419_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.342 x 8.027 at -2.491 degrees (North through East) ! Clean map min=-0.0013312 max=0.072695 Jy/beam ! Writing clean map to FITS file: J0505-0419_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0726947 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000185415 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.765178 0.765178 1.53036 3.06071 6.12143 12.2429 24.4857 48.9714 97.9428 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.342 x 8.027 at -2.491 degrees (North through East) ! Clean map min=-0.0013312 max=0.072695 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0505-0419_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:59 2019