! Started logfile: J0501+1356_S_2017_02_19_pus_uvs.log on Sat May 4 18:43:01 2019 obs J0501+1356_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0501+1356_S_2017_02_19_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.737037 visibilities/baseline/integration-bin. ! Found source: J0501+1356 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1592 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0501+1356_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.839430Jy sigma=0.007901 ! Fit after self-cal, rms=0.833707Jy sigma=0.007855 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.437 mas, bmaj=7.064 mas, bpa=-7.51 degrees ! Estimated noise=2382.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122614 Jy ! Component: 100 - total flux cleaned = 0.161834 Jy ! Total flux subtracted in 100 components = 0.161834 Jy ! Clean residual min=-0.012927 max=0.026146 Jy/beam ! Clean residual mean=-0.000005 rms=0.004781 Jy/beam ! Combined flux in latest and established models = 0.161834 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.161834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095847Jy sigma=0.000855 ! Fit after self-cal, rms=0.095743Jy sigma=0.000854 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=7.282 mas, bpa=-5.639 degrees ! Estimated noise=2064.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263932 Jy ! Component: 100 - total flux cleaned = 0.039269 Jy ! Component: 150 - total flux cleaned = 0.0455812 Jy ! Component: 200 - total flux cleaned = 0.0478284 Jy ! Total flux subtracted in 200 components = 0.0478284 Jy ! Clean residual min=-0.014808 max=0.025523 Jy/beam ! Clean residual mean=-0.000007 rms=0.004866 Jy/beam ! Combined flux in latest and established models = 0.209662 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 23 components and 0.209662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088343Jy sigma=0.000788 ! Fit after self-cal, rms=0.088299Jy sigma=0.000788 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.89 HN 1.01 KP 1.02 ! LA 0.97 MK 0.97 NL 1.31 OV 1.04 ! PT 1.00* SC 1.09 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.92 HN 1.00 KP 0.98 ! LA 0.91 MK 0.91 NL 1.51 OV 1.03 ! PT 1.00* SC 1.12 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.94 HN 1.01 KP 0.88 ! LA 0.74 MK 0.90 NL 1.80 OV 0.92 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.94 HN 0.92 KP 1.00* ! LA 0.69 MK 1.90 NL 1.00* OV 1.09 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.088299Jy sigma=0.000788 ! Fit after self-cal, rms=0.085222Jy sigma=0.000698 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=7.376 mas, bpa=-5.528 degrees ! Estimated noise=2049.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.5, 38.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127833 Jy ! Component: 100 - total flux cleaned = 0.0169106 Jy ! Component: 150 - total flux cleaned = 0.0199353 Jy ! Component: 200 - total flux cleaned = 0.0215386 Jy ! Total flux subtracted in 200 components = 0.0215386 Jy ! Clean residual min=-0.007496 max=0.010035 Jy/beam ! Clean residual mean=0.000003 rms=0.002127 Jy/beam ! Combined flux in latest and established models = 0.231201 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 58 components and 0.231201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083123Jy sigma=0.000676 ! Fit after self-cal, rms=0.083415Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083415Jy sigma=0.000674 ! Fit after self-cal, rms=0.083070Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=7.41 mas, bpa=-5.506 degrees ! Estimated noise=2033.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00297712 Jy ! Component: 100 - total flux cleaned = 0.00378299 Jy ! Component: 150 - total flux cleaned = 0.0041312 Jy ! Component: 200 - total flux cleaned = 0.004549 Jy ! Total flux subtracted in 200 components = 0.004549 Jy ! Clean residual min=-0.006984 max=0.008682 Jy/beam ! Clean residual mean=0.000003 rms=0.001955 Jy/beam ! Combined flux in latest and established models = 0.23575 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 71 components and 0.23575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082589Jy sigma=0.000669 ! Fit after self-cal, rms=0.082594Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (62.5, -32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00583322 Jy ! Component: 100 - total flux cleaned = 0.00702807 Jy ! Component: 150 - total flux cleaned = 0.00733695 Jy ! Component: 200 - total flux cleaned = 0.00787899 Jy ! Total flux subtracted in 200 components = 0.00787899 Jy ! Clean residual min=-0.006907 max=0.006215 Jy/beam ! Clean residual mean=0.000003 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 0.243629 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.243629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081281Jy sigma=0.000662 ! Fit after self-cal, rms=0.081159Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081159Jy sigma=0.000661 ! Fit after self-cal, rms=0.080214Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.854 mas, bmaj=7.397 mas, bpa=-5.391 degrees ! Estimated noise=2023.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021479 Jy ! Component: 100 - total flux cleaned = 0.00368534 Jy ! Component: 150 - total flux cleaned = 0.0040086 Jy ! Component: 200 - total flux cleaned = 0.00411262 Jy ! Total flux subtracted in 200 components = 0.00411262 Jy ! Clean residual min=-0.006750 max=0.005317 Jy/beam ! Clean residual mean=0.000002 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 0.247741 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 100 components and 0.247741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079728Jy sigma=0.000657 ! Fit after self-cal, rms=0.079676Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141808 Jy ! Component: 100 - total flux cleaned = 0.00178075 Jy ! Component: 150 - total flux cleaned = 0.00203033 Jy ! Component: 200 - total flux cleaned = 0.00225757 Jy ! Total flux subtracted in 200 components = 0.00225757 Jy ! Clean residual min=-0.006579 max=0.004880 Jy/beam ! Clean residual mean=0.000002 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.249999 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 109 components and 0.249999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079426Jy sigma=0.000656 ! Fit after self-cal, rms=0.079420Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079420Jy sigma=0.000656 ! Fit after self-cal, rms=0.078999Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.766 mas, bmaj=9.897 mas, bpa=3.384 degrees ! Estimated noise=2643.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00039925 Jy ! Component: 100 - total flux cleaned = -0.000408712 Jy ! Component: 150 - total flux cleaned = -0.000252303 Jy ! Component: 200 - total flux cleaned = -0.000324248 Jy ! Total flux subtracted in 200 components = -0.000324248 Jy ! Clean residual min=-0.006987 max=0.006108 Jy/beam ! Clean residual mean=0.000003 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.249675 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 136 components and 0.249675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078846Jy sigma=0.000655 ! Fit after self-cal, rms=0.078843Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144528 Jy ! Component: 100 - total flux cleaned = -0.000209937 Jy ! Component: 150 - total flux cleaned = -0.000331827 Jy ! Component: 200 - total flux cleaned = -0.000444703 Jy ! Total flux subtracted in 200 components = -0.000444703 Jy ! Clean residual min=-0.006806 max=0.005762 Jy/beam ! Clean residual mean=0.000003 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.24923 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 154 components and 0.24923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078789Jy sigma=0.000655 ! Fit after self-cal, rms=0.078797Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=7.39 mas, bpa=-5.329 degrees ! Estimated noise=2023.07 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 7.39 at -5.329 degrees (North through East) ! Clean map min=-0.0079084 max=0.16668 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.476 mas, bmaj=7.167 mas, bpa=-7.251 degrees ! Estimated noise=2401.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123069 Jy ! Component: 100 - total flux cleaned = 0.160909 Jy ! Component: 150 - total flux cleaned = 0.180111 Jy ! Component: 200 - total flux cleaned = 0.189363 Jy ! Total flux subtracted in 200 components = 0.189363 Jy ! Clean residual min=-0.009477 max=0.013663 Jy/beam ! Clean residual mean=0.000003 rms=0.002822 Jy/beam ! Combined flux in latest and established models = 0.189363 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.189363 Jy ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=7.39 mas, bpa=-5.329 degrees ! Estimated noise=2023.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0160178 Jy ! Component: 100 - total flux cleaned = 0.0248316 Jy ! Component: 150 - total flux cleaned = 0.0305819 Jy ! Component: 200 - total flux cleaned = 0.0355268 Jy ! Total flux subtracted in 200 components = 0.0355268 Jy ! Clean residual min=-0.007065 max=0.007422 Jy/beam ! Clean residual mean=0.000004 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.22489 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 53 components and 0.22489 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.766 mas, bmaj=9.897 mas, bpa=3.384 degrees ! Estimated noise=2643.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00802163 Jy ! Component: 100 - total flux cleaned = 0.0130073 Jy ! Component: 150 - total flux cleaned = 0.0165287 Jy ! Component: 200 - total flux cleaned = 0.019215 Jy ! Total flux subtracted in 200 components = 0.019215 Jy ! Clean residual min=-0.007138 max=0.008119 Jy/beam ! Clean residual mean=0.000006 rms=0.002191 Jy/beam ! Combined flux in latest and established models = 0.244105 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201676 Jy ! Component: 100 - total flux cleaned = 0.00345157 Jy ! Component: 150 - total flux cleaned = 0.00415669 Jy ! Component: 200 - total flux cleaned = 0.0046313 Jy ! Total flux subtracted in 200 components = 0.0046313 Jy ! Clean residual min=-0.006493 max=0.007522 Jy/beam ! Clean residual mean=0.000006 rms=0.002042 Jy/beam ! Combined flux in latest and established models = 0.248736 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 96 components and 0.248736 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.859 mas, bmaj=7.39 mas, bpa=-5.329 degrees ! Estimated noise=2023.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138783 Jy ! Component: 100 - total flux cleaned = 0.00193621 Jy ! Component: 150 - total flux cleaned = 0.00301185 Jy ! Component: 200 - total flux cleaned = 0.00332704 Jy ! Total flux subtracted in 200 components = 0.00332704 Jy ! Clean residual min=-0.005499 max=0.006025 Jy/beam ! Clean residual mean=0.000003 rms=0.001428 Jy/beam ! Combined flux in latest and established models = 0.252063 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 113 components and 0.252063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078727Jy sigma=0.000656 ! Fit after self-cal, rms=0.078724Jy sigma=0.000655 wmodel J0501+1356_S_2017_02_19_pus_map.mod ! Writing 113 model components to file: J0501+1356_S_2017_02_19_pus_map.mod wobs J0501+1356_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0501+1356_S_2017_02_19_pus_uvs.fits wwins J0501+1356_S_2017_02_19_pus_map.win ! wwins: Wrote 4 windows to J0501+1356_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000102868 Jy ! Component: 100 - total flux cleaned = -1.84333e-05 Jy ! Component: 150 - total flux cleaned = -0.00010101 Jy ! Component: 200 - total flux cleaned = -0.00048696 Jy ! Component: 250 - total flux cleaned = -0.000921325 Jy ! Component: 300 - total flux cleaned = -0.00168344 Jy ! Component: 350 - total flux cleaned = -0.00221718 Jy ! Component: 400 - total flux cleaned = -0.00292634 Jy ! Component: 450 - total flux cleaned = -0.00361002 Jy ! Component: 500 - total flux cleaned = -0.00427216 Jy ! Component: 550 - total flux cleaned = -0.00514391 Jy ! Component: 600 - total flux cleaned = -0.00593285 Jy ! Component: 650 - total flux cleaned = -0.00648011 Jy ! Component: 700 - total flux cleaned = -0.00696075 Jy ! Component: 750 - total flux cleaned = -0.00742811 Jy ! Component: 800 - total flux cleaned = -0.00798301 Jy ! Component: 850 - total flux cleaned = -0.00837559 Jy ! Component: 900 - total flux cleaned = -0.00880657 Jy ! Component: 950 - total flux cleaned = -0.00918089 Jy ! Component: 1000 - total flux cleaned = -0.0094999 Jy ! Component: 1050 - total flux cleaned = -0.00989931 Jy ! Component: 1100 - total flux cleaned = -0.0102015 Jy ! Component: 1150 - total flux cleaned = -0.0104552 Jy ! Component: 1200 - total flux cleaned = -0.0108273 Jy ! Component: 1250 - total flux cleaned = -0.0110697 Jy ! Component: 1300 - total flux cleaned = -0.0114251 Jy ! Component: 1350 - total flux cleaned = -0.0116176 Jy ! Component: 1400 - total flux cleaned = -0.0118069 Jy ! Component: 1450 - total flux cleaned = -0.0120296 Jy ! Component: 1500 - total flux cleaned = -0.0121033 Jy ! Component: 1550 - total flux cleaned = -0.0122471 Jy ! Component: 1600 - total flux cleaned = -0.0122118 Jy ! Component: 1650 - total flux cleaned = -0.0120738 Jy ! Component: 1700 - total flux cleaned = -0.0120741 Jy ! Component: 1750 - total flux cleaned = -0.0120408 Jy ! Component: 1800 - total flux cleaned = -0.0120415 Jy ! Component: 1850 - total flux cleaned = -0.0120091 Jy ! Component: 1900 - total flux cleaned = -0.0120413 Jy ! Component: 1950 - total flux cleaned = -0.0119481 Jy ! Component: 2000 - total flux cleaned = -0.0119489 Jy ! Component: 2050 - total flux cleaned = -0.0119796 Jy ! Component: 2100 - total flux cleaned = -0.0119795 Jy ! Component: 2150 - total flux cleaned = -0.0119796 Jy ! Component: 2200 - total flux cleaned = -0.0118639 Jy ! Component: 2250 - total flux cleaned = -0.0118355 Jy ! Component: 2300 - total flux cleaned = -0.0119202 Jy ! Component: 2350 - total flux cleaned = -0.0119199 Jy ! Component: 2400 - total flux cleaned = -0.0118921 Jy ! Component: 2450 - total flux cleaned = -0.0118376 Jy ! Component: 2500 - total flux cleaned = -0.011811 Jy ! Component: 2550 - total flux cleaned = -0.0117581 Jy ! Component: 2600 - total flux cleaned = -0.011837 Jy ! Component: 2650 - total flux cleaned = -0.0118105 Jy ! Component: 2700 - total flux cleaned = -0.011836 Jy ! Component: 2750 - total flux cleaned = -0.0119124 Jy ! Component: 2800 - total flux cleaned = -0.011912 Jy ! Component: 2850 - total flux cleaned = -0.0118869 Jy ! Component: 2900 - total flux cleaned = -0.0119117 Jy ! Component: 2950 - total flux cleaned = -0.0119118 Jy ! Component: 3000 - total flux cleaned = -0.0119117 Jy ! Component: 3050 - total flux cleaned = -0.0118631 Jy ! Component: 3100 - total flux cleaned = -0.0118632 Jy ! Component: 3150 - total flux cleaned = -0.0119108 Jy ! Component: 3200 - total flux cleaned = -0.0118395 Jy ! Component: 3250 - total flux cleaned = -0.0118158 Jy ! Component: 3300 - total flux cleaned = -0.0118391 Jy ! Component: 3350 - total flux cleaned = -0.0117927 Jy ! Component: 3400 - total flux cleaned = -0.011816 Jy ! Component: 3450 - total flux cleaned = -0.0118161 Jy ! Component: 3500 - total flux cleaned = -0.0118619 Jy ! Component: 3550 - total flux cleaned = -0.0118165 Jy ! Component: 3600 - total flux cleaned = -0.0118619 Jy ! Component: 3650 - total flux cleaned = -0.0118844 Jy ! Component: 3700 - total flux cleaned = -0.011929 Jy ! Component: 3750 - total flux cleaned = -0.01184 Jy ! Component: 3800 - total flux cleaned = -0.0118621 Jy ! Component: 3850 - total flux cleaned = -0.0118622 Jy ! Component: 3900 - total flux cleaned = -0.0118623 Jy ! Component: 3950 - total flux cleaned = -0.0118404 Jy ! Component: 4000 - total flux cleaned = -0.0119056 Jy ! Component: 4050 - total flux cleaned = -0.0118404 Jy ! Total flux subtracted in 4096 components = -0.011819 Jy ! Clean residual min=-0.001356 max=0.001711 Jy/beam ! Clean residual mean=0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.240244 Jy keep ! Adding 269 model components to the UV plane model. ! The established model now contains 382 components and 0.240244 Jy ![Exited script file: muppet] wmap "J0501+1356_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 7.39 at -5.329 degrees (North through East) ! Clean map min=-0.0045177 max=0.16404 Jy/beam ! Writing clean map to FITS file: J0501+1356_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.164036 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000344134 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.629375 0.629375 1.25875 2.5175 5.035 10.07 20.14 40.28 80.5601 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.164 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.859 x 7.39 at -5.329 degrees (North through East) ! Clean map min=-0.0045177 max=0.16404 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0501+1356_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:43:05 2019