! Started logfile: J0500+2651_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:32:03 2019 obs J0500+2651_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0500+2651_S_2017_03_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.907407 visibilities/baseline/integration-bin. ! Found source: J0500+2651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 18620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0500+2651_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 421 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955257Jy sigma=0.008715 ! Fit after self-cal, rms=0.940709Jy sigma=0.008609 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=6.05 mas, bpa=-2.433 degrees ! Estimated noise=930.913 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491837 Jy ! Component: 100 - total flux cleaned = 0.0599092 Jy ! Total flux subtracted in 100 components = 0.0599092 Jy ! Clean residual min=-0.002450 max=0.003005 Jy/beam ! Clean residual mean=0.000003 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0599092 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0599092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079387Jy sigma=0.000664 ! Fit after self-cal, rms=0.079250Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=6.713 mas, bpa=-1.996 degrees ! Estimated noise=621.981 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247229 Jy ! Component: 100 - total flux cleaned = 0.00327412 Jy ! Component: 150 - total flux cleaned = 0.00323227 Jy ! Component: 200 - total flux cleaned = 0.00317631 Jy ! Total flux subtracted in 200 components = 0.00317631 Jy ! Clean residual min=-0.001832 max=0.001897 Jy/beam ! Clean residual mean=-0.000001 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0630855 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 16 components and 0.0630855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079175Jy sigma=0.000663 ! Fit after self-cal, rms=0.079180Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.02 KP 1.16 ! LA 0.94 MK 1.06 NL 1.01 OV 1.08 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 1.03 KP 0.96 ! LA 1.00 MK 0.96 NL 1.04 OV 1.05 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.95 HN 0.99 KP 1.00 ! LA 0.97 MK 1.01 NL 0.99 OV 0.98 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.03 HN 0.97 KP 1.00* ! LA 1.15 MK 0.97 NL 1.00* OV 0.96 ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.079180Jy sigma=0.000663 ! Fit after self-cal, rms=0.078890Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.454 mas, bmaj=6.695 mas, bpa=-1.763 degrees ! Estimated noise=621.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201235 Jy ! Component: 100 - total flux cleaned = 0.000170908 Jy ! Component: 150 - total flux cleaned = 0.000136365 Jy ! Component: 200 - total flux cleaned = 0.00011612 Jy ! Total flux subtracted in 200 components = 0.00011612 Jy ! Clean residual min=-0.001686 max=0.001923 Jy/beam ! Clean residual mean=0.000000 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.0632017 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 21 components and 0.0632017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078885Jy sigma=0.000662 ! Fit after self-cal, rms=0.078884Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078884Jy sigma=0.000662 ! Fit after self-cal, rms=0.080310Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=6.678 mas, bpa=-1.678 degrees ! Estimated noise=622.372 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338367 Jy ! Component: 100 - total flux cleaned = 0.000401026 Jy ! Component: 150 - total flux cleaned = 0.000392145 Jy ! Component: 200 - total flux cleaned = 0.000384209 Jy ! Total flux subtracted in 200 components = 0.000384209 Jy ! Clean residual min=-0.001715 max=0.001623 Jy/beam ! Clean residual mean=-0.000001 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0635859 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.0635859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080306Jy sigma=0.000660 ! Fit after self-cal, rms=0.080407Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.81427e-05 Jy ! Component: 100 - total flux cleaned = 1.89385e-05 Jy ! Component: 150 - total flux cleaned = 1.59074e-06 Jy ! Component: 200 - total flux cleaned = -2.04894e-05 Jy ! Total flux subtracted in 200 components = -2.04894e-05 Jy ! Clean residual min=-0.001708 max=0.001662 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0635654 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.0635654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080404Jy sigma=0.000660 ! Fit after self-cal, rms=0.080405Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080405Jy sigma=0.000659 ! Fit after self-cal, rms=0.081417Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=6.667 mas, bpa=-1.752 degrees ! Estimated noise=623.403 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298556 Jy ! Component: 100 - total flux cleaned = 0.000328029 Jy ! Component: 150 - total flux cleaned = 0.000320691 Jy ! Component: 200 - total flux cleaned = 0.000320902 Jy ! Total flux subtracted in 200 components = 0.000320902 Jy ! Clean residual min=-0.001714 max=0.001636 Jy/beam ! Clean residual mean=-0.000002 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.0638863 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0638863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081414Jy sigma=0.000659 ! Fit after self-cal, rms=0.081451Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.12354e-05 Jy ! Component: 100 - total flux cleaned = 2.18925e-05 Jy ! Component: 150 - total flux cleaned = 8.84195e-06 Jy ! Component: 200 - total flux cleaned = 3.01589e-06 Jy ! Total flux subtracted in 200 components = 3.01589e-06 Jy ! Clean residual min=-0.001704 max=0.001643 Jy/beam ! Clean residual mean=-0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0638893 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.0638893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081449Jy sigma=0.000659 ! Fit after self-cal, rms=0.081451Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081451Jy sigma=0.000659 ! Fit after self-cal, rms=0.081751Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.258 mas, bmaj=9.875 mas, bpa=-1.246 degrees ! Estimated noise=781.423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151563 Jy ! Component: 100 - total flux cleaned = 0.000199832 Jy ! Component: 150 - total flux cleaned = 0.000229741 Jy ! Component: 200 - total flux cleaned = 0.000248414 Jy ! Total flux subtracted in 200 components = 0.000248414 Jy ! Clean residual min=-0.001983 max=0.001575 Jy/beam ! Clean residual mean=-0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0641377 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0641377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081752Jy sigma=0.000659 ! Fit after self-cal, rms=0.081762Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21475e-06 Jy ! Component: 100 - total flux cleaned = 6.57118e-06 Jy ! Component: 150 - total flux cleaned = 1.19628e-05 Jy ! Component: 200 - total flux cleaned = 1.69873e-05 Jy ! Total flux subtracted in 200 components = 1.69873e-05 Jy ! Clean residual min=-0.001976 max=0.001573 Jy/beam ! Clean residual mean=-0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0641547 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.0641547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081762Jy sigma=0.000659 ! Fit after self-cal, rms=0.081763Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=6.657 mas, bpa=-1.827 degrees ! Estimated noise=624.355 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 6.657 at -1.827 degrees (North through East) ! Clean map min=-0.0016217 max=0.062509 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.844 mas, bmaj=5.998 mas, bpa=-2.32 degrees ! Estimated noise=923.586 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487927 Jy ! Component: 100 - total flux cleaned = 0.0595773 Jy ! Component: 150 - total flux cleaned = 0.0627168 Jy ! Component: 200 - total flux cleaned = 0.0635749 Jy ! Total flux subtracted in 200 components = 0.0635749 Jy ! Clean residual min=-0.002166 max=0.001954 Jy/beam ! Clean residual mean=0.000000 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0635749 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0635749 Jy ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=6.657 mas, bpa=-1.827 degrees ! Estimated noise=624.355 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000567798 Jy ! Component: 100 - total flux cleaned = 0.000568796 Jy ! Component: 150 - total flux cleaned = 0.000593718 Jy ! Component: 200 - total flux cleaned = 0.000628528 Jy ! Total flux subtracted in 200 components = 0.000628528 Jy ! Clean residual min=-0.001703 max=0.001575 Jy/beam ! Clean residual mean=-0.000002 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0642034 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.0642034 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.258 mas, bmaj=9.875 mas, bpa=-1.246 degrees ! Estimated noise=781.423 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.59305e-05 Jy ! Component: 100 - total flux cleaned = -6.71708e-05 Jy ! Component: 150 - total flux cleaned = -4.89314e-05 Jy ! Component: 200 - total flux cleaned = -5.39277e-05 Jy ! Total flux subtracted in 200 components = -5.39277e-05 Jy ! Clean residual min=-0.001976 max=0.001564 Jy/beam ! Clean residual mean=-0.000005 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0641495 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.46432e-06 Jy ! Component: 100 - total flux cleaned = -1.26775e-05 Jy ! Component: 150 - total flux cleaned = -1.24734e-05 Jy ! Component: 200 - total flux cleaned = -8.77959e-06 Jy ! Total flux subtracted in 200 components = -8.77959e-06 Jy ! Clean residual min=-0.001977 max=0.001562 Jy/beam ! Clean residual mean=-0.000005 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0641407 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 30 components and 0.0641407 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=6.657 mas, bpa=-1.827 degrees ! Estimated noise=624.355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111344 Jy ! Component: 100 - total flux cleaned = -9.86869e-05 Jy ! Component: 150 - total flux cleaned = -8.74254e-05 Jy ! Component: 200 - total flux cleaned = -7.69323e-05 Jy ! Total flux subtracted in 200 components = -7.69323e-05 Jy ! Clean residual min=-0.001726 max=0.001575 Jy/beam ! Clean residual mean=-0.000002 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.0640638 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0640637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081765Jy sigma=0.000659 ! Fit after self-cal, rms=0.081762Jy sigma=0.000659 wmodel J0500+2651_S_2017_03_27_pus_map.mod ! Writing 38 model components to file: J0500+2651_S_2017_03_27_pus_map.mod wobs J0500+2651_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0500+2651_S_2017_03_27_pus_uvs.fits wwins J0500+2651_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0500+2651_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129597 Jy ! Component: 100 - total flux cleaned = 0.000184241 Jy ! Component: 150 - total flux cleaned = 0.000235258 Jy ! Component: 200 - total flux cleaned = 0.000187874 Jy ! Component: 250 - total flux cleaned = 0.000234249 Jy ! Component: 300 - total flux cleaned = 0.000256823 Jy ! Component: 350 - total flux cleaned = 0.000365668 Jy ! Component: 400 - total flux cleaned = 0.000344036 Jy ! Component: 450 - total flux cleaned = 0.000323031 Jy ! Component: 500 - total flux cleaned = 0.000322703 Jy ! Component: 550 - total flux cleaned = 0.000242825 Jy ! Component: 600 - total flux cleaned = 0.000243372 Jy ! Component: 650 - total flux cleaned = 0.000262856 Jy ! Component: 700 - total flux cleaned = 0.000243939 Jy ! Component: 750 - total flux cleaned = 0.000299832 Jy ! Component: 800 - total flux cleaned = 0.000299918 Jy ! Component: 850 - total flux cleaned = 0.000371759 Jy ! Component: 900 - total flux cleaned = 0.000353554 Jy ! Component: 950 - total flux cleaned = 0.000335816 Jy ! Component: 1000 - total flux cleaned = 0.000404911 Jy ! Component: 1050 - total flux cleaned = 0.000370861 Jy ! Component: 1100 - total flux cleaned = 0.000421567 Jy ! Component: 1150 - total flux cleaned = 0.000438499 Jy ! Component: 1200 - total flux cleaned = 0.00050449 Jy ! Component: 1250 - total flux cleaned = 0.000553341 Jy ! Component: 1300 - total flux cleaned = 0.000553413 Jy ! Component: 1350 - total flux cleaned = 0.000537645 Jy ! Component: 1400 - total flux cleaned = 0.000616465 Jy ! Component: 1450 - total flux cleaned = 0.000663271 Jy ! Component: 1500 - total flux cleaned = 0.000663133 Jy ! Component: 1550 - total flux cleaned = 0.00066325 Jy ! Component: 1600 - total flux cleaned = 0.000678267 Jy ! Component: 1650 - total flux cleaned = 0.000663128 Jy ! Component: 1700 - total flux cleaned = 0.000692862 Jy ! Component: 1750 - total flux cleaned = 0.000678128 Jy ! Component: 1800 - total flux cleaned = 0.000619609 Jy ! Component: 1850 - total flux cleaned = 0.000619863 Jy ! Component: 1900 - total flux cleaned = 0.000691622 Jy ! Component: 1950 - total flux cleaned = 0.000677378 Jy ! Component: 2000 - total flux cleaned = 0.000705563 Jy ! Component: 2050 - total flux cleaned = 0.000719545 Jy ! Component: 2100 - total flux cleaned = 0.000650137 Jy ! Component: 2150 - total flux cleaned = 0.000705328 Jy ! Component: 2200 - total flux cleaned = 0.000719068 Jy ! Component: 2250 - total flux cleaned = 0.000759628 Jy ! Component: 2300 - total flux cleaned = 0.000759644 Jy ! Component: 2350 - total flux cleaned = 0.000839661 Jy ! Component: 2400 - total flux cleaned = 0.000905772 Jy ! Component: 2450 - total flux cleaned = 0.000905719 Jy ! Component: 2500 - total flux cleaned = 0.000945011 Jy ! Component: 2550 - total flux cleaned = 0.000983938 Jy ! Component: 2600 - total flux cleaned = 0.00104834 Jy ! Component: 2650 - total flux cleaned = 0.00108645 Jy ! Component: 2700 - total flux cleaned = 0.00111175 Jy ! Component: 2750 - total flux cleaned = 0.00109942 Jy ! Component: 2800 - total flux cleaned = 0.00116205 Jy ! Component: 2850 - total flux cleaned = 0.00122435 Jy ! Component: 2900 - total flux cleaned = 0.00129829 Jy ! Component: 2950 - total flux cleaned = 0.00133501 Jy ! Component: 3000 - total flux cleaned = 0.00131066 Jy ! Component: 3050 - total flux cleaned = 0.00140741 Jy ! Component: 3100 - total flux cleaned = 0.00140745 Jy ! Component: 3150 - total flux cleaned = 0.00149099 Jy ! Component: 3200 - total flux cleaned = 0.00155028 Jy ! Component: 3250 - total flux cleaned = 0.00159741 Jy ! Component: 3300 - total flux cleaned = 0.00162089 Jy ! Component: 3350 - total flux cleaned = 0.00164405 Jy ! Component: 3400 - total flux cleaned = 0.001725 Jy ! Component: 3450 - total flux cleaned = 0.00172492 Jy ! Component: 3500 - total flux cleaned = 0.00177074 Jy ! Component: 3550 - total flux cleaned = 0.00182741 Jy ! Component: 3600 - total flux cleaned = 0.00180492 Jy ! Component: 3650 - total flux cleaned = 0.00186101 Jy ! Component: 3700 - total flux cleaned = 0.00186103 Jy ! Component: 3750 - total flux cleaned = 0.00188337 Jy ! Component: 3800 - total flux cleaned = 0.00191653 Jy ! Component: 3850 - total flux cleaned = 0.00193846 Jy ! Component: 3900 - total flux cleaned = 0.00196036 Jy ! Component: 3950 - total flux cleaned = 0.00200397 Jy ! Component: 4000 - total flux cleaned = 0.00205808 Jy ! Component: 4050 - total flux cleaned = 0.00207966 Jy ! Total flux subtracted in 4096 components = 0.00212253 Jy ! Clean residual min=-0.000661 max=0.000773 Jy/beam ! Clean residual mean=-0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0661863 Jy keep ! Adding 316 model components to the UV plane model. ! The established model now contains 354 components and 0.0661863 Jy ![Exited script file: muppet] wmap "J0500+2651_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 6.657 at -1.827 degrees (North through East) ! Clean map min=-0.0010734 max=0.062612 Jy/beam ! Writing clean map to FITS file: J0500+2651_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0626119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198652 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.951825 0.951825 1.90365 3.8073 7.6146 15.2292 30.4584 60.9168 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 6.657 at -1.827 degrees (North through East) ! Clean map min=-0.0010734 max=0.062612 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0500+2651_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:32:09 2019