! Started logfile: J0458-3139_S_2017_10_21_pus_uvs.log on Sat May 11 20:51:05 2019 obs J0458-3139_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0458-3139_S_2017_10_21_pus_uva.fits ! AN table 1: 147 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.591081 visibilities/baseline/integration-bin. ! Found source: J0458-3139 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 12512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0458-3139_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 300 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 683 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002541Jy sigma=0.007522 ! Fit after self-cal, rms=0.945098Jy sigma=0.007102 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.54 mas, bmaj=16.47 mas, bpa=-23.99 degrees ! Estimated noise=2159.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452483 Jy ! Component: 100 - total flux cleaned = 0.0562674 Jy ! Total flux subtracted in 100 components = 0.0562674 Jy ! Clean residual min=-0.008685 max=0.008415 Jy/beam ! Clean residual mean=-0.000058 rms=0.002226 Jy/beam ! Combined flux in latest and established models = 0.0562674 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0562674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104528Jy sigma=0.000695 ! Fit after self-cal, rms=0.103231Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=19.78 mas, bpa=-24.99 degrees ! Estimated noise=944.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00706627 Jy ! Component: 100 - total flux cleaned = 0.0106238 Jy ! Component: 150 - total flux cleaned = 0.0123222 Jy ! Component: 200 - total flux cleaned = 0.0128567 Jy ! Total flux subtracted in 200 components = 0.0128567 Jy ! Clean residual min=-0.007536 max=0.006463 Jy/beam ! Clean residual mean=-0.000124 rms=0.002609 Jy/beam ! Combined flux in latest and established models = 0.0691241 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.069124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102658Jy sigma=0.000681 ! Fit after self-cal, rms=0.102632Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 0.90 KP 1.40 ! LA 0.95 MK 1.14 NL 0.89 OV 1.19 ! PT 0.75 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.15 HN 0.93 KP 1.29 ! LA 0.96 MK 1.07 NL 0.95 OV 1.21 ! PT 0.73 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.19 HN 0.83 KP 1.24 ! LA 0.81 MK 1.08 NL 1.10 OV 1.10 ! PT 0.73 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.79 KP 1.00* ! LA 0.72 MK 1.06 NL 1.00* OV 1.00* ! PT 0.68 ! ! ! Fit before self-cal, rms=0.102632Jy sigma=0.000681 ! Fit after self-cal, rms=0.099015Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=19.4 mas, bpa=-24.49 degrees ! Estimated noise=946.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394143 Jy ! Component: 100 - total flux cleaned = 0.00050944 Jy ! Component: 150 - total flux cleaned = 0.000578485 Jy ! Component: 200 - total flux cleaned = 0.000641786 Jy ! Total flux subtracted in 200 components = 0.000641786 Jy ! Clean residual min=-0.003312 max=0.003725 Jy/beam ! Clean residual mean=-0.000024 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.0697658 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 0.0697658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098981Jy sigma=0.000668 ! Fit after self-cal, rms=0.100440Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100440Jy sigma=0.000663 ! Fit after self-cal, rms=0.110034Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=19.42 mas, bpa=-24.32 degrees ! Estimated noise=966.622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112372 Jy ! Component: 100 - total flux cleaned = -0.000113301 Jy ! Component: 150 - total flux cleaned = -5.64458e-05 Jy ! Component: 200 - total flux cleaned = -4.21929e-06 Jy ! Total flux subtracted in 200 components = -4.21929e-06 Jy ! Clean residual min=-0.002918 max=0.003124 Jy/beam ! Clean residual mean=-0.000019 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0697616 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.0697616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110005Jy sigma=0.000660 ! Fit after self-cal, rms=0.111698Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000601502 Jy ! Component: 100 - total flux cleaned = -0.000576934 Jy ! Component: 150 - total flux cleaned = -0.000494402 Jy ! Component: 200 - total flux cleaned = -0.000393351 Jy ! Total flux subtracted in 200 components = -0.000393351 Jy ! Clean residual min=-0.003579 max=0.002653 Jy/beam ! Clean residual mean=-0.000037 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.0693683 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.0693682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111657Jy sigma=0.000658 ! Fit after self-cal, rms=0.111686Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111686Jy sigma=0.000658 ! Fit after self-cal, rms=0.120083Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=19.51 mas, bpa=-24.27 degrees ! Estimated noise=974.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423252 Jy ! Component: 100 - total flux cleaned = -0.000459202 Jy ! Component: 150 - total flux cleaned = -0.000431198 Jy ! Component: 200 - total flux cleaned = -0.000379986 Jy ! Total flux subtracted in 200 components = -0.000379986 Jy ! Clean residual min=-0.002817 max=0.002729 Jy/beam ! Clean residual mean=-0.000019 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.0689883 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.0689882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120051Jy sigma=0.000657 ! Fit after self-cal, rms=0.121324Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659694 Jy ! Component: 100 - total flux cleaned = -0.000593171 Jy ! Component: 150 - total flux cleaned = -0.000486049 Jy ! Component: 200 - total flux cleaned = -0.000392391 Jy ! Total flux subtracted in 200 components = -0.000392391 Jy ! Clean residual min=-0.003171 max=0.002511 Jy/beam ! Clean residual mean=-0.000028 rms=0.000856 Jy/beam ! Combined flux in latest and established models = 0.0685959 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 69 components and 0.0685959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121288Jy sigma=0.000657 ! Fit after self-cal, rms=0.121316Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121316Jy sigma=0.000657 ! Fit after self-cal, rms=0.128444Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=40.52 mas, bpa=-10.7 degrees ! Estimated noise=1098.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000695276 Jy ! Component: 100 - total flux cleaned = -0.000674921 Jy ! Component: 150 - total flux cleaned = -0.000621291 Jy ! Component: 200 - total flux cleaned = -0.000558694 Jy ! Total flux subtracted in 200 components = -0.000558694 Jy ! Clean residual min=-0.003180 max=0.001980 Jy/beam ! Clean residual mean=-0.000031 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0680372 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 80 components and 0.0680372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128426Jy sigma=0.000656 ! Fit after self-cal, rms=0.129310Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246699 Jy ! Component: 100 - total flux cleaned = -0.000201168 Jy ! Component: 150 - total flux cleaned = -0.000165032 Jy ! Component: 200 - total flux cleaned = -0.000149872 Jy ! Total flux subtracted in 200 components = -0.000149872 Jy ! Clean residual min=-0.003128 max=0.002318 Jy/beam ! Clean residual mean=-0.000037 rms=0.001035 Jy/beam ! Combined flux in latest and established models = 0.0678873 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.0678873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129297Jy sigma=0.000656 ! Fit after self-cal, rms=0.129328Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=19.61 mas, bpa=-24.25 degrees ! Estimated noise=979.335 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 19.61 at -24.25 degrees (North through East) ! Clean map min=-0.003079 max=0.050272 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.648 mas, bmaj=15.69 mas, bpa=-23.03 degrees ! Estimated noise=2362.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451999 Jy ! Component: 100 - total flux cleaned = 0.0579952 Jy ! Component: 150 - total flux cleaned = 0.0617566 Jy ! Component: 200 - total flux cleaned = 0.0634874 Jy ! Total flux subtracted in 200 components = 0.0634874 Jy ! Clean residual min=-0.006234 max=0.005350 Jy/beam ! Clean residual mean=-0.000016 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.0634874 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0634874 Jy ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=19.61 mas, bpa=-24.25 degrees ! Estimated noise=979.335 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274009 Jy ! Component: 100 - total flux cleaned = 0.00324819 Jy ! Component: 150 - total flux cleaned = 0.00344552 Jy ! Component: 200 - total flux cleaned = 0.00355499 Jy ! Total flux subtracted in 200 components = 0.00355499 Jy ! Clean residual min=-0.003253 max=0.002608 Jy/beam ! Clean residual mean=-0.000025 rms=0.000821 Jy/beam ! Combined flux in latest and established models = 0.0670424 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.0670424 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.446 mas, bmaj=40.52 mas, bpa=-10.7 degrees ! Estimated noise=1098.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484175 Jy ! Component: 100 - total flux cleaned = 0.000560438 Jy ! Component: 150 - total flux cleaned = 0.00062361 Jy ! Component: 200 - total flux cleaned = 0.000676626 Jy ! Total flux subtracted in 200 components = 0.000676626 Jy ! Clean residual min=-0.003272 max=0.002396 Jy/beam ! Clean residual mean=-0.000039 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.067719 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.33454e-05 Jy ! Component: 100 - total flux cleaned = 7.84226e-05 Jy ! Component: 150 - total flux cleaned = 9.40571e-05 Jy ! Component: 200 - total flux cleaned = 0.00013769 Jy ! Total flux subtracted in 200 components = 0.00013769 Jy ! Clean residual min=-0.003180 max=0.002333 Jy/beam ! Clean residual mean=-0.000039 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.0678567 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.0678567 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=19.61 mas, bpa=-24.25 degrees ! Estimated noise=979.335 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000355732 Jy ! Component: 100 - total flux cleaned = -0.000364148 Jy ! Component: 150 - total flux cleaned = -0.000279243 Jy ! Component: 200 - total flux cleaned = -0.000205423 Jy ! Total flux subtracted in 200 components = -0.000205423 Jy ! Clean residual min=-0.003046 max=0.002354 Jy/beam ! Clean residual mean=-0.000026 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0676513 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 53 components and 0.0676513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129283Jy sigma=0.000656 ! Fit after self-cal, rms=0.129227Jy sigma=0.000656 wmodel J0458-3139_S_2017_10_21_pus_map.mod ! Writing 53 model components to file: J0458-3139_S_2017_10_21_pus_map.mod wobs J0458-3139_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0458-3139_S_2017_10_21_pus_uvs.fits wwins J0458-3139_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0458-3139_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135404 Jy ! Component: 100 - total flux cleaned = -0.00202553 Jy ! Component: 150 - total flux cleaned = -0.00256763 Jy ! Component: 200 - total flux cleaned = -0.00302071 Jy ! Component: 250 - total flux cleaned = -0.00299081 Jy ! Component: 300 - total flux cleaned = -0.00278121 Jy ! Component: 350 - total flux cleaned = -0.00255203 Jy ! Component: 400 - total flux cleaned = -0.00233296 Jy ! Component: 450 - total flux cleaned = -0.00214921 Jy ! Component: 500 - total flux cleaned = -0.00204803 Jy ! Component: 550 - total flux cleaned = -0.00197398 Jy ! Component: 600 - total flux cleaned = -0.00190206 Jy ! Component: 650 - total flux cleaned = -0.00183228 Jy ! Component: 700 - total flux cleaned = -0.00187787 Jy ! Component: 750 - total flux cleaned = -0.00196742 Jy ! Component: 800 - total flux cleaned = -0.0020112 Jy ! Component: 850 - total flux cleaned = -0.00214132 Jy ! Component: 900 - total flux cleaned = -0.00229074 Jy ! Component: 950 - total flux cleaned = -0.00235391 Jy ! Component: 1000 - total flux cleaned = -0.00245815 Jy ! Component: 1050 - total flux cleaned = -0.00256149 Jy ! Component: 1100 - total flux cleaned = -0.00258197 Jy ! Component: 1150 - total flux cleaned = -0.00268347 Jy ! Component: 1200 - total flux cleaned = -0.00276441 Jy ! Component: 1250 - total flux cleaned = -0.00292532 Jy ! Component: 1300 - total flux cleaned = -0.00308515 Jy ! Component: 1350 - total flux cleaned = -0.00324408 Jy ! Component: 1400 - total flux cleaned = -0.00334291 Jy ! Component: 1450 - total flux cleaned = -0.00348064 Jy ! Component: 1500 - total flux cleaned = -0.00357851 Jy ! Component: 1550 - total flux cleaned = -0.0036956 Jy ! Component: 1600 - total flux cleaned = -0.00379274 Jy ! Component: 1650 - total flux cleaned = -0.00392853 Jy ! Component: 1700 - total flux cleaned = -0.00398658 Jy ! Component: 1750 - total flux cleaned = -0.00418043 Jy ! Component: 1800 - total flux cleaned = -0.00439413 Jy ! Component: 1850 - total flux cleaned = -0.0045888 Jy ! Component: 1900 - total flux cleaned = -0.00478402 Jy ! Component: 1950 - total flux cleaned = -0.00488207 Jy ! Component: 2000 - total flux cleaned = -0.00500044 Jy ! Component: 2050 - total flux cleaned = -0.00511958 Jy ! Component: 2100 - total flux cleaned = -0.00513972 Jy ! Component: 2150 - total flux cleaned = -0.00513987 Jy ! Component: 2200 - total flux cleaned = -0.00513982 Jy ! Component: 2250 - total flux cleaned = -0.00516079 Jy ! Component: 2300 - total flux cleaned = -0.00513968 Jy ! Component: 2350 - total flux cleaned = -0.00518247 Jy ! Component: 2400 - total flux cleaned = -0.0052259 Jy ! Component: 2450 - total flux cleaned = -0.00524864 Jy ! Component: 2500 - total flux cleaned = -0.0052709 Jy ! Component: 2550 - total flux cleaned = -0.00531697 Jy ! Component: 2600 - total flux cleaned = -0.00534048 Jy ! Component: 2650 - total flux cleaned = -0.00536367 Jy ! Component: 2700 - total flux cleaned = -0.00541241 Jy ! Component: 2750 - total flux cleaned = -0.00541258 Jy ! Component: 2800 - total flux cleaned = -0.00543803 Jy ! Component: 2850 - total flux cleaned = -0.00546454 Jy ! Component: 2900 - total flux cleaned = -0.00549092 Jy ! Component: 2950 - total flux cleaned = -0.00551848 Jy ! Component: 3000 - total flux cleaned = -0.00551851 Jy ! Component: 3050 - total flux cleaned = -0.00554718 Jy ! Component: 3100 - total flux cleaned = -0.00554763 Jy ! Component: 3150 - total flux cleaned = -0.00551785 Jy ! Component: 3200 - total flux cleaned = -0.00551819 Jy ! Component: 3250 - total flux cleaned = -0.00545572 Jy ! Component: 3300 - total flux cleaned = -0.00542345 Jy ! Component: 3350 - total flux cleaned = -0.00539 Jy ! Component: 3400 - total flux cleaned = -0.00532178 Jy ! Component: 3450 - total flux cleaned = -0.00532115 Jy ! Component: 3500 - total flux cleaned = -0.00528531 Jy ! Component: 3550 - total flux cleaned = -0.00524841 Jy ! Component: 3600 - total flux cleaned = -0.00521009 Jy ! Component: 3650 - total flux cleaned = -0.00517134 Jy ! Component: 3700 - total flux cleaned = -0.00513131 Jy ! Component: 3750 - total flux cleaned = -0.00509044 Jy ! Component: 3800 - total flux cleaned = -0.00504789 Jy ! Component: 3850 - total flux cleaned = -0.00500419 Jy ! Component: 3900 - total flux cleaned = -0.00496003 Jy ! Component: 3950 - total flux cleaned = -0.0049136 Jy ! Component: 4000 - total flux cleaned = -0.0048663 Jy ! Component: 4050 - total flux cleaned = -0.00486701 Jy ! Total flux subtracted in 4096 components = -0.00476766 Jy ! Clean residual min=-0.002769 max=0.002642 Jy/beam ! Clean residual mean=0.000029 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.0628836 Jy keep ! Adding 212 model components to the UV plane model. ! The established model now contains 265 components and 0.0628836 Jy ![Exited script file: muppet] wmap "J0458-3139_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 19.61 at -24.25 degrees (North through East) ! Clean map min=-0.0066726 max=0.054206 Jy/beam ! Writing clean map to FITS file: J0458-3139_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0542064 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000975936 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.40122 5.40122 10.8024 21.6049 43.2097 86.4195 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.469 x 19.61 at -24.25 degrees (North through East) ! Clean map min=-0.0066726 max=0.054206 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0458-3139_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:51:10 2019