! Started logfile: J0458-3139_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:31 2019 obs J0458-3139_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0458-3139_S_2017_10_09_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.665725 visibilities/baseline/integration-bin. ! Found source: J0458-3139 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 28280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0458-3139_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 531 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 751 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 677 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1570 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998446Jy sigma=0.006966 ! Fit after self-cal, rms=0.944170Jy sigma=0.006614 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.417 mas, bmaj=12.29 mas, bpa=-21.54 degrees ! Estimated noise=1847.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452569 Jy ! Component: 100 - total flux cleaned = 0.0562575 Jy ! Total flux subtracted in 100 components = 0.0562575 Jy ! Clean residual min=-0.005500 max=0.005813 Jy/beam ! Clean residual mean=-0.000027 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 0.0562575 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0562575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100705Jy sigma=0.000629 ! Fit after self-cal, rms=0.099391Jy sigma=0.000620 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.056 mas, bmaj=13.86 mas, bpa=-20.57 degrees ! Estimated noise=744.437 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00682838 Jy ! Component: 100 - total flux cleaned = 0.0100729 Jy ! Component: 150 - total flux cleaned = 0.0108835 Jy ! Component: 200 - total flux cleaned = 0.0110173 Jy ! Total flux subtracted in 200 components = 0.0110173 Jy ! Clean residual min=-0.004343 max=0.004999 Jy/beam ! Clean residual mean=-0.000143 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 0.0672748 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 28 components and 0.0672748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098816Jy sigma=0.000617 ! Fit after self-cal, rms=0.098786Jy sigma=0.000617 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.25 HN 1.01 KP 1.03 ! LA 0.89 MK 0.98 NL 0.96 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.20 HN 1.09 KP 1.04 ! LA 0.85 MK 1.00 NL 1.08 OV 1.00* ! PT 0.89 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.20 HN 1.07 KP 0.89 ! LA 0.76 MK 1.01 NL 1.13 OV 1.00* ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 225 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.89 KP 1.00* ! LA 1.00* MK 0.89 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.098786Jy sigma=0.000617 ! Fit after self-cal, rms=0.098169Jy sigma=0.000615 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=14.09 mas, bpa=-20.51 degrees ! Estimated noise=747.627 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109685 Jy ! Component: 100 - total flux cleaned = 3.45039e-05 Jy ! Component: 150 - total flux cleaned = 3.2312e-07 Jy ! Component: 200 - total flux cleaned = -1.51582e-07 Jy ! Total flux subtracted in 200 components = -1.51582e-07 Jy ! Clean residual min=-0.002746 max=0.004662 Jy/beam ! Clean residual mean=-0.000092 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.0672746 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 35 components and 0.0672746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098131Jy sigma=0.000615 ! Fit after self-cal, rms=0.098255Jy sigma=0.000613 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098255Jy sigma=0.000613 ! Fit after self-cal, rms=0.100147Jy sigma=0.000612 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=14.2 mas, bpa=-20.81 degrees ! Estimated noise=754.002 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117573 Jy ! Component: 100 - total flux cleaned = 0.000117829 Jy ! Component: 150 - total flux cleaned = 6.93804e-05 Jy ! Component: 200 - total flux cleaned = 2.52758e-05 Jy ! Total flux subtracted in 200 components = 2.52758e-05 Jy ! Clean residual min=-0.002641 max=0.004979 Jy/beam ! Clean residual mean=-0.000077 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.0672999 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0672999 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100118Jy sigma=0.000612 ! Fit after self-cal, rms=0.100317Jy sigma=0.000612 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (35, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00326744 Jy ! Component: 100 - total flux cleaned = 0.00341373 Jy ! Component: 150 - total flux cleaned = 0.00372659 Jy ! Component: 200 - total flux cleaned = 0.00398215 Jy ! Total flux subtracted in 200 components = 0.00398215 Jy ! Clean residual min=-0.002352 max=0.003211 Jy/beam ! Clean residual mean=-0.000075 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0712821 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 64 components and 0.071282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100175Jy sigma=0.000611 ! Fit after self-cal, rms=0.099896Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099896Jy sigma=0.000610 ! Fit after self-cal, rms=0.099728Jy sigma=0.000610 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=14.34 mas, bpa=-20.95 degrees ! Estimated noise=749.655 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277185 Jy ! Component: 100 - total flux cleaned = 0.00260325 Jy ! Component: 150 - total flux cleaned = 0.00232581 Jy ! Component: 200 - total flux cleaned = 0.00208439 Jy ! Total flux subtracted in 200 components = 0.00208439 Jy ! Clean residual min=-0.001891 max=0.003099 Jy/beam ! Clean residual mean=-0.000049 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0733664 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 88 components and 0.0733664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099617Jy sigma=0.000609 ! Fit after self-cal, rms=0.099493Jy sigma=0.000608 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-34, 29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274563 Jy ! Component: 100 - total flux cleaned = 0.00414068 Jy ! Component: 150 - total flux cleaned = 0.00458316 Jy ! Component: 200 - total flux cleaned = 0.00479104 Jy ! Total flux subtracted in 200 components = 0.00479104 Jy ! Clean residual min=-0.001937 max=0.001921 Jy/beam ! Clean residual mean=-0.000042 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0781575 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 117 components and 0.0781575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099405Jy sigma=0.000608 ! Fit after self-cal, rms=0.099123Jy sigma=0.000607 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099123Jy sigma=0.000607 ! Fit after self-cal, rms=0.098696Jy sigma=0.000607 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.404 mas, bmaj=27.72 mas, bpa=-7.329 degrees ! Estimated noise=913.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256088 Jy ! Component: 100 - total flux cleaned = 0.00338556 Jy ! Component: 150 - total flux cleaned = 0.00324918 Jy ! Component: 200 - total flux cleaned = 0.00304173 Jy ! Total flux subtracted in 200 components = 0.00304173 Jy ! Clean residual min=-0.001936 max=0.001870 Jy/beam ! Clean residual mean=-0.000041 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0811992 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 145 components and 0.0811992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098636Jy sigma=0.000607 ! Fit after self-cal, rms=0.098517Jy sigma=0.000607 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135414 Jy ! Component: 100 - total flux cleaned = 0.00135757 Jy ! Component: 150 - total flux cleaned = 0.00127997 Jy ! Component: 200 - total flux cleaned = 0.00117416 Jy ! Total flux subtracted in 200 components = 0.00117416 Jy ! Clean residual min=-0.001966 max=0.001859 Jy/beam ! Clean residual mean=-0.000039 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0823734 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 169 components and 0.0823734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098487Jy sigma=0.000606 ! Fit after self-cal, rms=0.098366Jy sigma=0.000606 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=14.41 mas, bpa=-20.98 degrees ! Estimated noise=739.887 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 14.41 at -20.98 degrees (North through East) ! Clean map min=-0.0023381 max=0.059088 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=12.54 mas, bpa=-21.88 degrees ! Estimated noise=1879.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0466603 Jy ! Component: 100 - total flux cleaned = 0.0606463 Jy ! Component: 150 - total flux cleaned = 0.0693522 Jy ! Component: 200 - total flux cleaned = 0.073595 Jy ! Total flux subtracted in 200 components = 0.073595 Jy ! Clean residual min=-0.005363 max=0.004942 Jy/beam ! Clean residual mean=-0.000011 rms=0.001402 Jy/beam ! Combined flux in latest and established models = 0.073595 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.073595 Jy ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=14.41 mas, bpa=-20.98 degrees ! Estimated noise=739.887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, -15). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00474079 Jy ! Component: 100 - total flux cleaned = 0.00662536 Jy ! Component: 150 - total flux cleaned = 0.0078277 Jy ! Component: 200 - total flux cleaned = 0.00883547 Jy ! Total flux subtracted in 200 components = 0.00883547 Jy ! Clean residual min=-0.002328 max=0.002358 Jy/beam ! Clean residual mean=-0.000030 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0824304 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 61 components and 0.0824304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.404 mas, bmaj=27.72 mas, bpa=-7.329 degrees ! Estimated noise=913.225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119859 Jy ! Component: 100 - total flux cleaned = 0.00216017 Jy ! Component: 150 - total flux cleaned = 0.00235752 Jy ! Component: 200 - total flux cleaned = 0.00218212 Jy ! Total flux subtracted in 200 components = 0.00218212 Jy ! Clean residual min=-0.002088 max=0.002024 Jy/beam ! Clean residual mean=-0.000035 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.0846126 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159026 Jy ! Component: 100 - total flux cleaned = -0.000303654 Jy ! Component: 150 - total flux cleaned = -0.00043701 Jy ! Component: 200 - total flux cleaned = -0.000560742 Jy ! Total flux subtracted in 200 components = -0.000560742 Jy ! Clean residual min=-0.001908 max=0.001779 Jy/beam ! Clean residual mean=-0.000034 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0840518 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 119 components and 0.0840518 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=14.41 mas, bpa=-20.98 degrees ! Estimated noise=739.887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000541638 Jy ! Component: 100 - total flux cleaned = 0.000381149 Jy ! Component: 150 - total flux cleaned = 5.9199e-05 Jy ! Component: 200 - total flux cleaned = -0.000148805 Jy ! Total flux subtracted in 200 components = -0.000148805 Jy ! Clean residual min=-0.001801 max=0.001740 Jy/beam ! Clean residual mean=-0.000016 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.083903 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 142 components and 0.083903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098375Jy sigma=0.000606 ! Fit after self-cal, rms=0.098301Jy sigma=0.000606 wmodel J0458-3139_S_2017_10_09_pus_map.mod ! Writing 142 model components to file: J0458-3139_S_2017_10_09_pus_map.mod wobs J0458-3139_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0458-3139_S_2017_10_09_pus_uvs.fits wwins J0458-3139_S_2017_10_09_pus_map.win ! wwins: Wrote 4 windows to J0458-3139_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000165499 Jy ! Component: 100 - total flux cleaned = -0.000194496 Jy ! Component: 150 - total flux cleaned = -0.000387359 Jy ! Component: 200 - total flux cleaned = -0.000466709 Jy ! Component: 250 - total flux cleaned = -0.000593885 Jy ! Component: 300 - total flux cleaned = -0.000691195 Jy ! Component: 350 - total flux cleaned = -0.000856715 Jy ! Component: 400 - total flux cleaned = -0.000879055 Jy ! Component: 450 - total flux cleaned = -0.000945999 Jy ! Component: 500 - total flux cleaned = -0.000923883 Jy ! Component: 550 - total flux cleaned = -0.000775044 Jy ! Component: 600 - total flux cleaned = -0.000692227 Jy ! Component: 650 - total flux cleaned = -0.000591131 Jy ! Component: 700 - total flux cleaned = -0.000591017 Jy ! Component: 750 - total flux cleaned = -0.000532497 Jy ! Component: 800 - total flux cleaned = -0.000494809 Jy ! Component: 850 - total flux cleaned = -0.000457341 Jy ! Component: 900 - total flux cleaned = -0.000347192 Jy ! Component: 950 - total flux cleaned = -0.000292723 Jy ! Component: 1000 - total flux cleaned = -0.000204512 Jy ! Component: 1050 - total flux cleaned = -0.000134875 Jy ! Component: 1100 - total flux cleaned = -8.38124e-05 Jy ! Component: 1150 - total flux cleaned = -5.03916e-05 Jy ! Component: 1200 - total flux cleaned = -1.72857e-05 Jy ! Component: 1250 - total flux cleaned = -1.72026e-05 Jy ! Component: 1300 - total flux cleaned = 3.09338e-05 Jy ! Component: 1350 - total flux cleaned = 6.26118e-05 Jy ! Component: 1400 - total flux cleaned = 9.35958e-05 Jy ! Component: 1450 - total flux cleaned = 1.68187e-05 Jy ! Component: 1500 - total flux cleaned = 4.71837e-05 Jy ! Component: 1550 - total flux cleaned = 2.39434e-06 Jy ! Component: 1600 - total flux cleaned = 3.19137e-05 Jy ! Component: 1650 - total flux cleaned = -1.19846e-05 Jy ! Component: 1700 - total flux cleaned = -4.07609e-05 Jy ! Component: 1750 - total flux cleaned = -0.000125983 Jy ! Component: 1800 - total flux cleaned = -0.000140002 Jy ! Component: 1850 - total flux cleaned = -0.000223196 Jy ! Component: 1900 - total flux cleaned = -0.000236872 Jy ! Component: 1950 - total flux cleaned = -0.000291087 Jy ! Component: 2000 - total flux cleaned = -0.000358226 Jy ! Component: 2050 - total flux cleaned = -0.000371532 Jy ! Component: 2100 - total flux cleaned = -0.000424133 Jy ! Component: 2150 - total flux cleaned = -0.000476363 Jy ! Component: 2200 - total flux cleaned = -0.000553637 Jy ! Component: 2250 - total flux cleaned = -0.000591669 Jy ! Component: 2300 - total flux cleaned = -0.000629593 Jy ! Component: 2350 - total flux cleaned = -0.000717291 Jy ! Component: 2400 - total flux cleaned = -0.000741968 Jy ! Component: 2450 - total flux cleaned = -0.000840465 Jy ! Component: 2500 - total flux cleaned = -0.0009869 Jy ! Component: 2550 - total flux cleaned = -0.00105949 Jy ! Component: 2600 - total flux cleaned = -0.00116763 Jy ! Component: 2650 - total flux cleaned = -0.00127465 Jy ! Component: 2700 - total flux cleaned = -0.00139277 Jy ! Component: 2750 - total flux cleaned = -0.00148656 Jy ! Component: 2800 - total flux cleaned = -0.00156803 Jy ! Component: 2850 - total flux cleaned = -0.00169511 Jy ! Component: 2900 - total flux cleaned = -0.00176389 Jy ! Component: 2950 - total flux cleaned = -0.00191185 Jy ! Component: 3000 - total flux cleaned = -0.00200226 Jy ! Component: 3050 - total flux cleaned = -0.00209218 Jy ! Component: 3100 - total flux cleaned = -0.00222599 Jy ! Component: 3150 - total flux cleaned = -0.00232561 Jy ! Component: 3200 - total flux cleaned = -0.00242456 Jy ! Component: 3250 - total flux cleaned = -0.00249014 Jy ! Component: 3300 - total flux cleaned = -0.00260957 Jy ! Component: 3350 - total flux cleaned = -0.00270659 Jy ! Component: 3400 - total flux cleaned = -0.00280306 Jy ! Component: 3450 - total flux cleaned = -0.00288823 Jy ! Component: 3500 - total flux cleaned = -0.00301517 Jy ! Component: 3550 - total flux cleaned = -0.00307818 Jy ! Component: 3600 - total flux cleaned = -0.00319302 Jy ! Component: 3650 - total flux cleaned = -0.0032759 Jy ! Component: 3700 - total flux cleaned = -0.0033791 Jy ! Component: 3750 - total flux cleaned = -0.00348166 Jy ! Component: 3800 - total flux cleaned = -0.00359378 Jy ! Component: 3850 - total flux cleaned = -0.00367478 Jy ! Component: 3900 - total flux cleaned = -0.00375538 Jy ! Component: 3950 - total flux cleaned = -0.00384558 Jy ! Component: 4000 - total flux cleaned = -0.00392536 Jy ! Component: 4050 - total flux cleaned = -0.00398492 Jy ! Total flux subtracted in 4096 components = -0.00410347 Jy ! Clean residual min=-0.000573 max=0.000612 Jy/beam ! Clean residual mean=-0.000011 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0797995 Jy keep ! Adding 275 model components to the UV plane model. ! The established model now contains 417 components and 0.0797995 Jy ![Exited script file: muppet] wmap "J0458-3139_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 14.41 at -20.98 degrees (North through East) ! Clean map min=-0.0017923 max=0.056558 Jy/beam ! Writing clean map to FITS file: J0458-3139_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0565584 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000186101 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.987127 0.987127 1.97425 3.94851 7.89702 15.794 31.5881 63.1761 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 14.41 at -20.98 degrees (North through East) ! Clean map min=-0.0017923 max=0.056558 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0458-3139_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:36 2019