! Started logfile: J0458-3139_S_2017_07_16_pus_uvs.log on Thu May 9 11:01:53 2019 obs J0458-3139_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0458-3139_S_2017_07_16_pus_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.570074 visibilities/baseline/integration-bin. ! Found source: J0458-3139 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 15392 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0458-3139_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 432 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 662 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1341 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998353Jy sigma=0.006471 ! Fit after self-cal, rms=0.938964Jy sigma=0.006112 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.471 mas, bmaj=6.872 mas, bpa=-3.055 degrees ! Estimated noise=2300.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0508719 Jy ! Component: 100 - total flux cleaned = 0.0622458 Jy ! Total flux subtracted in 100 components = 0.0622458 Jy ! Clean residual min=-0.005772 max=0.005426 Jy/beam ! Clean residual mean=-0.000090 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 0.0622458 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0622458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104900Jy sigma=0.000619 ! Fit after self-cal, rms=0.103763Jy sigma=0.000612 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.145 mas, bmaj=8.309 mas, bpa=-3.891 degrees ! Estimated noise=1279.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628037 Jy ! Component: 100 - total flux cleaned = 0.00899896 Jy ! Component: 150 - total flux cleaned = 0.0102741 Jy ! Component: 200 - total flux cleaned = 0.0105239 Jy ! Total flux subtracted in 200 components = 0.0105239 Jy ! Clean residual min=-0.005408 max=0.006652 Jy/beam ! Clean residual mean=-0.000176 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.0727696 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 21 components and 0.0727696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103383Jy sigma=0.000610 ! Fit after self-cal, rms=0.103312Jy sigma=0.000610 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.96 KP 1.13 ! LA 0.94 MK 1.04 NL 1.02 OV 1.25 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.80 KP 1.10 ! LA 0.87 MK 1.15 NL 1.01 OV 1.15 ! PT 0.88 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.81 KP 1.03 ! LA 0.86 MK 1.00 NL 0.98 OV 1.09 ! PT 0.94 SC 0.94 ! ! ! Correcting IF 4. ! A total of 159 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.103312Jy sigma=0.000610 ! Fit after self-cal, rms=0.102792Jy sigma=0.000608 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=8.458 mas, bpa=-2.469 degrees ! Estimated noise=1304.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204117 Jy ! Component: 100 - total flux cleaned = 0.000268889 Jy ! Component: 150 - total flux cleaned = 0.000327224 Jy ! Component: 200 - total flux cleaned = 0.000355335 Jy ! Total flux subtracted in 200 components = 0.000355335 Jy ! Clean residual min=-0.004305 max=0.005879 Jy/beam ! Clean residual mean=-0.000117 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.073125 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.073125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102774Jy sigma=0.000608 ! Fit after self-cal, rms=0.102939Jy sigma=0.000607 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102939Jy sigma=0.000607 ! Fit after self-cal, rms=0.104412Jy sigma=0.000605 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.433 mas, bpa=-2.538 degrees ! Estimated noise=1313.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.32432e-05 Jy ! Component: 100 - total flux cleaned = 9.69527e-05 Jy ! Component: 150 - total flux cleaned = 9.61862e-05 Jy ! Component: 200 - total flux cleaned = 0.000156605 Jy ! Total flux subtracted in 200 components = 0.000156605 Jy ! Clean residual min=-0.003980 max=0.005034 Jy/beam ! Clean residual mean=-0.000077 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.0732816 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 27 components and 0.0732816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104389Jy sigma=0.000605 ! Fit after self-cal, rms=0.104589Jy sigma=0.000604 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230257 Jy ! Component: 100 - total flux cleaned = 0.000199921 Jy ! Component: 150 - total flux cleaned = 0.000226482 Jy ! Component: 200 - total flux cleaned = 0.00025207 Jy ! Total flux subtracted in 200 components = 0.00025207 Jy ! Clean residual min=-0.003772 max=0.004809 Jy/beam ! Clean residual mean=-0.000083 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.0735336 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.0735336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104573Jy sigma=0.000604 ! Fit after self-cal, rms=0.104576Jy sigma=0.000604 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104576Jy sigma=0.000604 ! Fit after self-cal, rms=0.105856Jy sigma=0.000604 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=8.404 mas, bpa=-2.609 degrees ! Estimated noise=1314.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.88672e-05 Jy ! Component: 100 - total flux cleaned = -5.07131e-05 Jy ! Component: 150 - total flux cleaned = -5.06163e-05 Jy ! Component: 200 - total flux cleaned = -2.32131e-05 Jy ! Total flux subtracted in 200 components = -2.32131e-05 Jy ! Clean residual min=-0.003654 max=0.004886 Jy/beam ! Clean residual mean=-0.000059 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.0735104 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 29 components and 0.0735104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105840Jy sigma=0.000603 ! Fit after self-cal, rms=0.105952Jy sigma=0.000603 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27, 87.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040439 Jy ! Component: 100 - total flux cleaned = 0.00494874 Jy ! Component: 150 - total flux cleaned = 0.00499763 Jy ! Component: 200 - total flux cleaned = 0.00495575 Jy ! Total flux subtracted in 200 components = 0.00495575 Jy ! Clean residual min=-0.003300 max=0.003659 Jy/beam ! Clean residual mean=-0.000044 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0784662 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 44 components and 0.0784662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105803Jy sigma=0.000602 ! Fit after self-cal, rms=0.105696Jy sigma=0.000602 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105696Jy sigma=0.000602 ! Fit after self-cal, rms=0.104846Jy sigma=0.000602 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.428 mas, bmaj=26.3 mas, bpa=-4.296 degrees ! Estimated noise=1607.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282665 Jy ! Component: 100 - total flux cleaned = 0.00358106 Jy ! Component: 150 - total flux cleaned = 0.00358155 Jy ! Component: 200 - total flux cleaned = 0.00360507 Jy ! Total flux subtracted in 200 components = 0.00360507 Jy ! Clean residual min=-0.003458 max=0.003564 Jy/beam ! Clean residual mean=-0.000066 rms=0.001214 Jy/beam ! Combined flux in latest and established models = 0.0820712 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.0820712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104808Jy sigma=0.000601 ! Fit after self-cal, rms=0.104786Jy sigma=0.000601 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105944 Jy ! Component: 100 - total flux cleaned = 0.00108911 Jy ! Component: 150 - total flux cleaned = 0.00108867 Jy ! Component: 200 - total flux cleaned = 0.00111086 Jy ! Total flux subtracted in 200 components = 0.00111086 Jy ! Clean residual min=-0.003424 max=0.003708 Jy/beam ! Clean residual mean=-0.000056 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 0.0831821 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.0831821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104771Jy sigma=0.000601 ! Fit after self-cal, rms=0.104746Jy sigma=0.000601 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.341 mas, bpa=-2.468 degrees ! Estimated noise=1304.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.341 at -2.468 degrees (North through East) ! Clean map min=-0.0030744 max=0.062899 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.527 mas, bmaj=6.885 mas, bpa=-2.405 degrees ! Estimated noise=2338.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517784 Jy ! Component: 100 - total flux cleaned = 0.0659371 Jy ! Component: 150 - total flux cleaned = 0.0732584 Jy ! Component: 200 - total flux cleaned = 0.077694 Jy ! Total flux subtracted in 200 components = 0.077694 Jy ! Clean residual min=-0.005163 max=0.005832 Jy/beam ! Clean residual mean=-0.000027 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.077694 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.077694 Jy ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.341 mas, bpa=-2.468 degrees ! Estimated noise=1304.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280675 Jy ! Component: 100 - total flux cleaned = 0.00353693 Jy ! Component: 150 - total flux cleaned = 0.00372046 Jy ! Component: 200 - total flux cleaned = 0.00388919 Jy ! Total flux subtracted in 200 components = 0.00388919 Jy ! Clean residual min=-0.003655 max=0.003404 Jy/beam ! Clean residual mean=-0.000036 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.0815832 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 32 components and 0.0815832 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.428 mas, bmaj=26.3 mas, bpa=-4.296 degrees ! Estimated noise=1607.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103817 Jy ! Component: 100 - total flux cleaned = 0.00123955 Jy ! Component: 150 - total flux cleaned = 0.00139789 Jy ! Component: 200 - total flux cleaned = 0.00144604 Jy ! Total flux subtracted in 200 components = 0.00144604 Jy ! Clean residual min=-0.003500 max=0.003738 Jy/beam ! Clean residual mean=-0.000058 rms=0.001222 Jy/beam ! Combined flux in latest and established models = 0.0830292 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.82851e-05 Jy ! Component: 100 - total flux cleaned = 0.000111268 Jy ! Component: 150 - total flux cleaned = 0.000152069 Jy ! Component: 200 - total flux cleaned = 0.000211503 Jy ! Total flux subtracted in 200 components = 0.000211503 Jy ! Clean residual min=-0.003461 max=0.003687 Jy/beam ! Clean residual mean=-0.000056 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.0832407 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0832407 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=8.341 mas, bpa=-2.468 degrees ! Estimated noise=1304.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000563896 Jy ! Component: 100 - total flux cleaned = -0.000615709 Jy ! Component: 150 - total flux cleaned = -0.00057122 Jy ! Component: 200 - total flux cleaned = -0.000529817 Jy ! Total flux subtracted in 200 components = -0.000529817 Jy ! Clean residual min=-0.003516 max=0.003218 Jy/beam ! Clean residual mean=-0.000031 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0827109 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 55 components and 0.0827109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104767Jy sigma=0.000601 ! Fit after self-cal, rms=0.104667Jy sigma=0.000601 wmodel J0458-3139_S_2017_07_16_pus_map.mod ! Writing 55 model components to file: J0458-3139_S_2017_07_16_pus_map.mod wobs J0458-3139_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0458-3139_S_2017_07_16_pus_uvs.fits wwins J0458-3139_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J0458-3139_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.78603e-06 Jy ! Component: 100 - total flux cleaned = 0.000211654 Jy ! Component: 150 - total flux cleaned = 0.000356286 Jy ! Component: 200 - total flux cleaned = 0.000583661 Jy ! Component: 250 - total flux cleaned = 0.000799638 Jy ! Component: 300 - total flux cleaned = 0.000922921 Jy ! Component: 350 - total flux cleaned = 0.00100119 Jy ! Component: 400 - total flux cleaned = 0.00107675 Jy ! Component: 450 - total flux cleaned = 0.00118597 Jy ! Component: 500 - total flux cleaned = 0.00129123 Jy ! Component: 550 - total flux cleaned = 0.0014935 Jy ! Component: 600 - total flux cleaned = 0.00165683 Jy ! Component: 650 - total flux cleaned = 0.00187786 Jy ! Component: 700 - total flux cleaned = 0.00209192 Jy ! Component: 750 - total flux cleaned = 0.00224035 Jy ! Component: 800 - total flux cleaned = 0.00244259 Jy ! Component: 850 - total flux cleaned = 0.002639 Jy ! Component: 900 - total flux cleaned = 0.00277501 Jy ! Component: 950 - total flux cleaned = 0.00288026 Jy ! Component: 1000 - total flux cleaned = 0.00300907 Jy ! Component: 1050 - total flux cleaned = 0.00310946 Jy ! Component: 1100 - total flux cleaned = 0.00325689 Jy ! Component: 1150 - total flux cleaned = 0.0033047 Jy ! Component: 1200 - total flux cleaned = 0.00344601 Jy ! Component: 1250 - total flux cleaned = 0.00356171 Jy ! Component: 1300 - total flux cleaned = 0.00374314 Jy ! Component: 1350 - total flux cleaned = 0.00383244 Jy ! Component: 1400 - total flux cleaned = 0.00398571 Jy ! Component: 1450 - total flux cleaned = 0.0040499 Jy ! Component: 1500 - total flux cleaned = 0.0042188 Jy ! Component: 1550 - total flux cleaned = 0.00432333 Jy ! Component: 1600 - total flux cleaned = 0.00442588 Jy ! Component: 1650 - total flux cleaned = 0.00452746 Jy ! Component: 1700 - total flux cleaned = 0.00468659 Jy ! Component: 1750 - total flux cleaned = 0.00480417 Jy ! Component: 1800 - total flux cleaned = 0.00495856 Jy ! Component: 1850 - total flux cleaned = 0.00505367 Jy ! Component: 1900 - total flux cleaned = 0.00522327 Jy ! Component: 1950 - total flux cleaned = 0.00537171 Jy ! Component: 2000 - total flux cleaned = 0.00548196 Jy ! Component: 2050 - total flux cleaned = 0.00564543 Jy ! Component: 2100 - total flux cleaned = 0.00578887 Jy ! Component: 2150 - total flux cleaned = 0.00598356 Jy ! Component: 2200 - total flux cleaned = 0.00615862 Jy ! Component: 2250 - total flux cleaned = 0.00633168 Jy ! Component: 2300 - total flux cleaned = 0.00645176 Jy ! Component: 2350 - total flux cleaned = 0.00662117 Jy ! Component: 2400 - total flux cleaned = 0.00675506 Jy ! Component: 2450 - total flux cleaned = 0.00697081 Jy ! Component: 2500 - total flux cleaned = 0.00711859 Jy ! Component: 2550 - total flux cleaned = 0.00728106 Jy ! Component: 2600 - total flux cleaned = 0.00745783 Jy ! Component: 2650 - total flux cleaned = 0.00758496 Jy ! Component: 2700 - total flux cleaned = 0.00774255 Jy ! Component: 2750 - total flux cleaned = 0.00786737 Jy ! Component: 2800 - total flux cleaned = 0.00799107 Jy ! Component: 2850 - total flux cleaned = 0.00815981 Jy ! Component: 2900 - total flux cleaned = 0.00828132 Jy ! Component: 2950 - total flux cleaned = 0.00846177 Jy ! Component: 3000 - total flux cleaned = 0.00859601 Jy ! Component: 3050 - total flux cleaned = 0.00869933 Jy ! Component: 3100 - total flux cleaned = 0.00884596 Jy ! Component: 3150 - total flux cleaned = 0.00894748 Jy ! Component: 3200 - total flux cleaned = 0.0090482 Jy ! Component: 3250 - total flux cleaned = 0.00919104 Jy ! Component: 3300 - total flux cleaned = 0.00937521 Jy ! Component: 3350 - total flux cleaned = 0.00951562 Jy ! Component: 3400 - total flux cleaned = 0.00961308 Jy ! Component: 3450 - total flux cleaned = 0.00972378 Jy ! Component: 3500 - total flux cleaned = 0.00980623 Jy ! Component: 3550 - total flux cleaned = 0.00994274 Jy ! Component: 3600 - total flux cleaned = 0.0100105 Jy ! Component: 3650 - total flux cleaned = 0.0101182 Jy ! Component: 3700 - total flux cleaned = 0.0101852 Jy ! Component: 3750 - total flux cleaned = 0.010265 Jy ! Component: 3800 - total flux cleaned = 0.010318 Jy ! Component: 3850 - total flux cleaned = 0.0103839 Jy ! Component: 3900 - total flux cleaned = 0.0104232 Jy ! Component: 3950 - total flux cleaned = 0.0104883 Jy ! Component: 4000 - total flux cleaned = 0.0105142 Jy ! Component: 4050 - total flux cleaned = 0.0105787 Jy ! Total flux subtracted in 4096 components = 0.0106556 Jy ! Clean residual min=-0.000695 max=0.000878 Jy/beam ! Clean residual mean=0.000001 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.0933665 Jy keep ! Adding 246 model components to the UV plane model. ! The established model now contains 301 components and 0.0933665 Jy ![Exited script file: muppet] wmap "J0458-3139_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.341 at -2.468 degrees (North through East) ! Clean map min=-0.001919 max=0.063502 Jy/beam ! Writing clean map to FITS file: J0458-3139_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0635025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021882 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.03376 1.03376 2.06751 4.13502 8.27005 16.5401 33.0802 66.1604 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.206 x 8.341 at -2.468 degrees (North through East) ! Clean map min=-0.001919 max=0.063502 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0458-3139_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:01:58 2019