! Started logfile: J0457-1819_S_2017_02_24_pus_uvs.log on Sat May 4 11:18:14 2019 obs J0457-1819_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0457-1819_S_2017_02_24_pus_uva.fits ! AN table 1: 150 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.750815 visibilities/baseline/integration-bin. ! Found source: J0457-1819 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 20272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0457-1819_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 316 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 339 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 716 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.914430Jy sigma=0.006595 ! Fit after self-cal, rms=0.897795Jy sigma=0.006496 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.858 mas, bpa=-5.151 degrees ! Estimated noise=1160.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0841463 Jy ! Component: 100 - total flux cleaned = 0.102496 Jy ! Total flux subtracted in 100 components = 0.102496 Jy ! Clean residual min=-0.003364 max=0.005120 Jy/beam ! Clean residual mean=-0.000003 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 0.102496 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.102496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100035Jy sigma=0.000670 ! Fit after self-cal, rms=0.100018Jy sigma=0.000670 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=8.088 mas, bpa=-4.445 degrees ! Estimated noise=755.039 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0039718 Jy ! Component: 100 - total flux cleaned = 0.00439883 Jy ! Component: 150 - total flux cleaned = 0.00442471 Jy ! Component: 200 - total flux cleaned = 0.00444544 Jy ! Total flux subtracted in 200 components = 0.00444544 Jy ! Clean residual min=-0.002181 max=0.002262 Jy/beam ! Clean residual mean=-0.000010 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.106941 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.106941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099871Jy sigma=0.000669 ! Fit after self-cal, rms=0.099868Jy sigma=0.000669 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.05 KP 1.00 ! LA 0.96 MK 0.98 NL 1.00 OV 1.06 ! PT 1.01 SC 0.92 ! ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 HN 1.09 KP 0.94 ! LA 0.91 MK 0.97 NL 0.97 OV 1.12 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.02 KP 1.07 ! LA 1.00 MK 1.04 NL 1.12 OV 0.97 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 HN 0.94 KP 1.00* ! LA 0.96 MK 1.04 NL 1.00* OV 1.01 ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.099868Jy sigma=0.000669 ! Fit after self-cal, rms=0.099778Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.192 mas, bmaj=8.056 mas, bpa=-4.126 degrees ! Estimated noise=754.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.40638e-05 Jy ! Component: 100 - total flux cleaned = -0.000166635 Jy ! Component: 150 - total flux cleaned = -0.000166172 Jy ! Component: 200 - total flux cleaned = -0.000143639 Jy ! Total flux subtracted in 200 components = -0.000143639 Jy ! Clean residual min=-0.001684 max=0.001656 Jy/beam ! Clean residual mean=-0.000004 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.106797 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 22 components and 0.106797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099771Jy sigma=0.000668 ! Fit after self-cal, rms=0.099786Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099786Jy sigma=0.000668 ! Fit after self-cal, rms=0.099961Jy sigma=0.000667 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.194 mas, bmaj=8.035 mas, bpa=-4.028 degrees ! Estimated noise=755.123 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.16816e-05 Jy ! Component: 100 - total flux cleaned = 3.93574e-05 Jy ! Component: 150 - total flux cleaned = 2.93234e-05 Jy ! Component: 200 - total flux cleaned = 1.98166e-05 Jy ! Total flux subtracted in 200 components = 1.98166e-05 Jy ! Clean residual min=-0.001674 max=0.001592 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.106817 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.106817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099958Jy sigma=0.000667 ! Fit after self-cal, rms=0.099970Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.9704e-05 Jy ! Component: 100 - total flux cleaned = -3.66772e-05 Jy ! Component: 150 - total flux cleaned = -4.4796e-05 Jy ! Component: 200 - total flux cleaned = -6.05556e-05 Jy ! Total flux subtracted in 200 components = -6.05556e-05 Jy ! Clean residual min=-0.001669 max=0.001573 Jy/beam ! Clean residual mean=-0.000003 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.106757 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.106757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099969Jy sigma=0.000667 ! Fit after self-cal, rms=0.099968Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099968Jy sigma=0.000667 ! Fit after self-cal, rms=0.099949Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.193 mas, bmaj=8.017 mas, bpa=-3.969 degrees ! Estimated noise=754.228 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.33796e-05 Jy ! Component: 100 - total flux cleaned = 5.41302e-05 Jy ! Component: 150 - total flux cleaned = 3.6066e-05 Jy ! Component: 200 - total flux cleaned = 2.77187e-05 Jy ! Total flux subtracted in 200 components = 2.77187e-05 Jy ! Clean residual min=-0.001704 max=0.001649 Jy/beam ! Clean residual mean=-0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.106784 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.106784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099947Jy sigma=0.000666 ! Fit after self-cal, rms=0.099953Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.88215e-05 Jy ! Component: 100 - total flux cleaned = -2.67258e-05 Jy ! Component: 150 - total flux cleaned = -2.64159e-05 Jy ! Component: 200 - total flux cleaned = -2.61688e-05 Jy ! Total flux subtracted in 200 components = -2.61688e-05 Jy ! Clean residual min=-0.001705 max=0.001631 Jy/beam ! Clean residual mean=-0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.106758 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.106758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099952Jy sigma=0.000666 ! Fit after self-cal, rms=0.099951Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099951Jy sigma=0.000666 ! Fit after self-cal, rms=0.099891Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.767 mas, bmaj=15.94 mas, bpa=1.787 degrees ! Estimated noise=940.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.94593e-05 Jy ! Component: 100 - total flux cleaned = 7.55955e-05 Jy ! Component: 150 - total flux cleaned = 7.88507e-05 Jy ! Component: 200 - total flux cleaned = 8.21126e-05 Jy ! Total flux subtracted in 200 components = 8.21126e-05 Jy ! Clean residual min=-0.002004 max=0.001470 Jy/beam ! Clean residual mean=-0.000005 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.10684 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 37 components and 0.10684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099891Jy sigma=0.000666 ! Fit after self-cal, rms=0.099892Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.10186e-07 Jy ! Component: 100 - total flux cleaned = -9.71237e-07 Jy ! Component: 150 - total flux cleaned = 5.04419e-06 Jy ! Component: 200 - total flux cleaned = 7.89149e-06 Jy ! Total flux subtracted in 200 components = 7.89149e-06 Jy ! Clean residual min=-0.002003 max=0.001470 Jy/beam ! Clean residual mean=-0.000005 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.106848 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 37 components and 0.106848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099892Jy sigma=0.000666 ! Fit after self-cal, rms=0.099892Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.009 mas, bpa=-3.92 degrees ! Estimated noise=753.672 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.009 at -3.92 degrees (North through East) ! Clean map min=-0.0016634 max=0.10748 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.568 mas, bmaj=6.767 mas, bpa=-4.432 degrees ! Estimated noise=1097.35 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0835202 Jy ! Component: 100 - total flux cleaned = 0.101733 Jy ! Component: 150 - total flux cleaned = 0.105764 Jy ! Component: 200 - total flux cleaned = 0.105877 Jy ! Total flux subtracted in 200 components = 0.105877 Jy ! Clean residual min=-0.002675 max=0.002659 Jy/beam ! Clean residual mean=0.000004 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.105877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.105877 Jy ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.009 mas, bpa=-3.92 degrees ! Estimated noise=753.672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000984159 Jy ! Component: 100 - total flux cleaned = 0.00102626 Jy ! Component: 150 - total flux cleaned = 0.00101025 Jy ! Component: 200 - total flux cleaned = 0.00102416 Jy ! Total flux subtracted in 200 components = 0.00102416 Jy ! Clean residual min=-0.001730 max=0.001655 Jy/beam ! Clean residual mean=-0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.106901 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.106901 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.767 mas, bmaj=15.94 mas, bpa=1.787 degrees ! Estimated noise=940.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.23536e-05 Jy ! Component: 100 - total flux cleaned = 4.71141e-05 Jy ! Component: 150 - total flux cleaned = 4.24318e-05 Jy ! Component: 200 - total flux cleaned = 3.44965e-05 Jy ! Total flux subtracted in 200 components = 3.44965e-05 Jy ! Clean residual min=-0.001997 max=0.001489 Jy/beam ! Clean residual mean=-0.000005 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.106935 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.23884e-06 Jy ! Component: 100 - total flux cleaned = -1.42871e-05 Jy ! Component: 150 - total flux cleaned = -2.39838e-05 Jy ! Component: 200 - total flux cleaned = -3.00255e-05 Jy ! Total flux subtracted in 200 components = -3.00255e-05 Jy ! Clean residual min=-0.001996 max=0.001486 Jy/beam ! Clean residual mean=-0.000005 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.106905 Jy ! Adding 6 model components to the UV plane model. ! The established model now contains 17 components and 0.106905 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.191 mas, bmaj=8.009 mas, bpa=-3.92 degrees ! Estimated noise=753.672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.07392e-05 Jy ! Component: 100 - total flux cleaned = -1.51461e-05 Jy ! Component: 150 - total flux cleaned = -2.71835e-05 Jy ! Component: 200 - total flux cleaned = -3.82514e-05 Jy ! Total flux subtracted in 200 components = -3.82514e-05 Jy ! Clean residual min=-0.001736 max=0.001647 Jy/beam ! Clean residual mean=-0.000003 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.106867 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.106867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099895Jy sigma=0.000666 ! Fit after self-cal, rms=0.099896Jy sigma=0.000666 wmodel J0457-1819_S_2017_02_24_pus_map.mod ! Writing 23 model components to file: J0457-1819_S_2017_02_24_pus_map.mod wobs J0457-1819_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0457-1819_S_2017_02_24_pus_uvs.fits wwins J0457-1819_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J0457-1819_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.83839e-05 Jy ! Component: 100 - total flux cleaned = -9.6672e-05 Jy ! Component: 150 - total flux cleaned = -0.000179683 Jy ! Component: 200 - total flux cleaned = -0.000259982 Jy ! Component: 250 - total flux cleaned = -0.000232917 Jy ! Component: 300 - total flux cleaned = -0.000105521 Jy ! Component: 350 - total flux cleaned = -5.60151e-05 Jy ! Component: 400 - total flux cleaned = 4.13712e-05 Jy ! Component: 450 - total flux cleaned = 0.000136922 Jy ! Component: 500 - total flux cleaned = 0.000184093 Jy ! Component: 550 - total flux cleaned = 0.000253376 Jy ! Component: 600 - total flux cleaned = 0.000343884 Jy ! Component: 650 - total flux cleaned = 0.00034363 Jy ! Component: 700 - total flux cleaned = 0.000387533 Jy ! Component: 750 - total flux cleaned = 0.000473542 Jy ! Component: 800 - total flux cleaned = 0.000473431 Jy ! Component: 850 - total flux cleaned = 0.000515283 Jy ! Component: 900 - total flux cleaned = 0.000515294 Jy ! Component: 950 - total flux cleaned = 0.000577029 Jy ! Component: 1000 - total flux cleaned = 0.000657791 Jy ! Component: 1050 - total flux cleaned = 0.000717375 Jy ! Component: 1100 - total flux cleaned = 0.000678547 Jy ! Component: 1150 - total flux cleaned = 0.000834996 Jy ! Component: 1200 - total flux cleaned = 0.000873294 Jy ! Component: 1250 - total flux cleaned = 0.000930584 Jy ! Component: 1300 - total flux cleaned = 0.000892777 Jy ! Component: 1350 - total flux cleaned = 0.000986405 Jy ! Component: 1400 - total flux cleaned = 0.00100477 Jy ! Component: 1450 - total flux cleaned = 0.00104149 Jy ! Component: 1500 - total flux cleaned = 0.00105949 Jy ! Component: 1550 - total flux cleaned = 0.00109562 Jy ! Component: 1600 - total flux cleaned = 0.00116704 Jy ! Component: 1650 - total flux cleaned = 0.00118455 Jy ! Component: 1700 - total flux cleaned = 0.0012544 Jy ! Component: 1750 - total flux cleaned = 0.00132385 Jy ! Component: 1800 - total flux cleaned = 0.00135824 Jy ! Component: 1850 - total flux cleaned = 0.00146043 Jy ! Component: 1900 - total flux cleaned = 0.00156182 Jy ! Component: 1950 - total flux cleaned = 0.00159505 Jy ! Component: 2000 - total flux cleaned = 0.0016451 Jy ! Component: 2050 - total flux cleaned = 0.00169459 Jy ! Component: 2100 - total flux cleaned = 0.00171058 Jy ! Component: 2150 - total flux cleaned = 0.00175935 Jy ! Component: 2200 - total flux cleaned = 0.00171074 Jy ! Component: 2250 - total flux cleaned = 0.00182305 Jy ! Component: 2300 - total flux cleaned = 0.00180718 Jy ! Component: 2350 - total flux cleaned = 0.00185466 Jy ! Component: 2400 - total flux cleaned = 0.00180769 Jy ! Component: 2450 - total flux cleaned = 0.00193204 Jy ! Component: 2500 - total flux cleaned = 0.00187038 Jy ! Component: 2550 - total flux cleaned = 0.0018398 Jy ! Component: 2600 - total flux cleaned = 0.00183974 Jy ! Component: 2650 - total flux cleaned = 0.00193059 Jy ! Component: 2700 - total flux cleaned = 0.00187031 Jy ! Component: 2750 - total flux cleaned = 0.00184024 Jy ! Component: 2800 - total flux cleaned = 0.00185525 Jy ! Component: 2850 - total flux cleaned = 0.00187006 Jy ! Component: 2900 - total flux cleaned = 0.00189948 Jy ! Component: 2950 - total flux cleaned = 0.00189954 Jy ! Component: 3000 - total flux cleaned = 0.0019576 Jy ! Component: 3050 - total flux cleaned = 0.00194321 Jy ! Component: 3100 - total flux cleaned = 0.00200043 Jy ! Component: 3150 - total flux cleaned = 0.00197201 Jy ! Component: 3200 - total flux cleaned = 0.00198623 Jy ! Component: 3250 - total flux cleaned = 0.00198622 Jy ! Component: 3300 - total flux cleaned = 0.00204228 Jy ! Component: 3350 - total flux cleaned = 0.00201433 Jy ! Component: 3400 - total flux cleaned = 0.00204217 Jy ! Component: 3450 - total flux cleaned = 0.0020834 Jy ! Component: 3500 - total flux cleaned = 0.00204235 Jy ! Component: 3550 - total flux cleaned = 0.00204238 Jy ! Component: 3600 - total flux cleaned = 0.00202894 Jy ! Component: 3650 - total flux cleaned = 0.00208277 Jy ! Component: 3700 - total flux cleaned = 0.00210956 Jy ! Component: 3750 - total flux cleaned = 0.00206959 Jy ! Component: 3800 - total flux cleaned = 0.00209622 Jy ! Component: 3850 - total flux cleaned = 0.00210951 Jy ! Component: 3900 - total flux cleaned = 0.00214889 Jy ! Component: 3950 - total flux cleaned = 0.00217505 Jy ! Component: 4000 - total flux cleaned = 0.00221404 Jy ! Component: 4050 - total flux cleaned = 0.0021882 Jy ! Total flux subtracted in 4096 components = 0.00221395 Jy ! Clean residual min=-0.000870 max=0.000695 Jy/beam ! Clean residual mean=-0.000003 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.109081 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 329 components and 0.109081 Jy ![Exited script file: muppet] wmap "J0457-1819_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.009 at -3.92 degrees (North through East) ! Clean map min=-0.001635 max=0.10737 Jy/beam ! Writing clean map to FITS file: J0457-1819_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107372 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244669 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.683615 0.683615 1.36723 2.73446 5.46892 10.9378 21.8757 43.7514 87.5027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.191 x 8.009 at -3.92 degrees (North through East) ! Clean map min=-0.001635 max=0.10737 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0457-1819_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:18:19 2019