! Started logfile: J0455+0655_S_2017_07_16_pus_uvs.log on Thu May 9 11:01:32 2019 obs J0455+0655_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0455+0655_S_2017_07_16_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.725617 visibilities/baseline/integration-bin. ! Found source: J0455+0655 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 18808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0455+0655_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 302 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 206 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1087 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.982871Jy sigma=0.009000 ! Fit after self-cal, rms=0.950657Jy sigma=0.008727 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.512 mas, bmaj=6.541 mas, bpa=-3.917 degrees ! Estimated noise=1208.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0409792 Jy ! Component: 100 - total flux cleaned = 0.0511658 Jy ! Total flux subtracted in 100 components = 0.0511658 Jy ! Clean residual min=-0.004082 max=0.004252 Jy/beam ! Clean residual mean=0.000005 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.0511658 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0511658 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074851Jy sigma=0.000662 ! Fit after self-cal, rms=0.074281Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=7.217 mas, bpa=-2.9 degrees ! Estimated noise=660.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043616 Jy ! Component: 100 - total flux cleaned = 0.0064251 Jy ! Component: 150 - total flux cleaned = 0.00748399 Jy ! Component: 200 - total flux cleaned = 0.00809658 Jy ! Total flux subtracted in 200 components = 0.00809658 Jy ! Clean residual min=-0.002012 max=0.002381 Jy/beam ! Clean residual mean=0.000002 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0592624 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0592624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074045Jy sigma=0.000656 ! Fit after self-cal, rms=0.074050Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.95 KP 0.97 ! LA 1.01 MK 1.06 NL 0.90 OV 1.03 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.99 KP 1.09 ! LA 0.93 MK 1.10 NL 1.04 OV 1.11 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 1.01 KP 1.00 ! LA 0.99 MK 1.08 NL 0.95 OV 0.96 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! A total of 129 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.89 KP 1.00* ! LA 0.90 MK 0.82 NL 1.00* OV 1.00* ! PT 0.79 SC 1.00* ! ! ! Fit before self-cal, rms=0.074050Jy sigma=0.000655 ! Fit after self-cal, rms=0.074321Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.021 mas, bmaj=7.256 mas, bpa=-2.566 degrees ! Estimated noise=666.368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475032 Jy ! Component: 100 - total flux cleaned = 0.000535967 Jy ! Component: 150 - total flux cleaned = 0.000552752 Jy ! Component: 200 - total flux cleaned = 0.000537975 Jy ! Total flux subtracted in 200 components = 0.000537975 Jy ! Clean residual min=-0.001877 max=0.001866 Jy/beam ! Clean residual mean=0.000000 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.0598004 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0598004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074311Jy sigma=0.000654 ! Fit after self-cal, rms=0.074343Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074343Jy sigma=0.000654 ! Fit after self-cal, rms=0.074700Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.024 mas, bmaj=7.264 mas, bpa=-2.478 degrees ! Estimated noise=668.226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000280935 Jy ! Component: 100 - total flux cleaned = 0.00031595 Jy ! Component: 150 - total flux cleaned = 0.000330048 Jy ! Component: 200 - total flux cleaned = 0.000317248 Jy ! Total flux subtracted in 200 components = 0.000317248 Jy ! Clean residual min=-0.001700 max=0.002042 Jy/beam ! Clean residual mean=-0.000000 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.0601176 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 40 components and 0.0601176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074693Jy sigma=0.000654 ! Fit after self-cal, rms=0.074712Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44, 61). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000947204 Jy ! Component: 100 - total flux cleaned = 0.000830971 Jy ! Component: 150 - total flux cleaned = 0.000772339 Jy ! Component: 200 - total flux cleaned = 0.000746313 Jy ! Total flux subtracted in 200 components = 0.000746313 Jy ! Clean residual min=-0.001830 max=0.001645 Jy/beam ! Clean residual mean=0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.0608639 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 0.0608639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074662Jy sigma=0.000653 ! Fit after self-cal, rms=0.074650Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074650Jy sigma=0.000653 ! Fit after self-cal, rms=0.075374Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=7.251 mas, bpa=-2.363 degrees ! Estimated noise=668.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000375729 Jy ! Component: 100 - total flux cleaned = 0.000450058 Jy ! Component: 150 - total flux cleaned = 0.000472586 Jy ! Component: 200 - total flux cleaned = 0.000472186 Jy ! Total flux subtracted in 200 components = 0.000472186 Jy ! Clean residual min=-0.001489 max=0.001635 Jy/beam ! Clean residual mean=0.000001 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0613361 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 69 components and 0.0613361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075357Jy sigma=0.000652 ! Fit after self-cal, rms=0.075414Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-104.5, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000624853 Jy ! Component: 100 - total flux cleaned = 0.000567687 Jy ! Component: 150 - total flux cleaned = 0.000565614 Jy ! Component: 200 - total flux cleaned = 0.000543038 Jy ! Total flux subtracted in 200 components = 0.000543038 Jy ! Clean residual min=-0.001491 max=0.001566 Jy/beam ! Clean residual mean=0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0618791 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 91 components and 0.0618791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075381Jy sigma=0.000651 ! Fit after self-cal, rms=0.075370Jy sigma=0.000651 ! Inverting map ! Added new window around map position (-11, 47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119304 Jy ! Component: 100 - total flux cleaned = 0.00112803 Jy ! Component: 150 - total flux cleaned = 0.00104053 Jy ! Component: 200 - total flux cleaned = 0.000933463 Jy ! Total flux subtracted in 200 components = 0.000933463 Jy ! Clean residual min=-0.001497 max=0.001444 Jy/beam ! Clean residual mean=0.000001 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0628126 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.0628126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075334Jy sigma=0.000651 ! Fit after self-cal, rms=0.075327Jy sigma=0.000651 ! Inverting map ! Added new window around map position (-60.5, 123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127768 Jy ! Component: 100 - total flux cleaned = 0.00146203 Jy ! Component: 150 - total flux cleaned = 0.00146102 Jy ! Component: 200 - total flux cleaned = 0.00140194 Jy ! Total flux subtracted in 200 components = 0.00140194 Jy ! Clean residual min=-0.001378 max=0.001353 Jy/beam ! Clean residual mean=0.000001 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0642145 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 130 components and 0.0642145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075289Jy sigma=0.000651 ! Fit after self-cal, rms=0.075283Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075283Jy sigma=0.000651 ! Fit after self-cal, rms=0.075249Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.607 mas, bmaj=11.46 mas, bpa=-7.198 degrees ! Estimated noise=872.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688781 Jy ! Component: 100 - total flux cleaned = 0.000612399 Jy ! Component: 150 - total flux cleaned = 0.000569685 Jy ! Component: 200 - total flux cleaned = 0.000568828 Jy ! Total flux subtracted in 200 components = 0.000568828 Jy ! Clean residual min=-0.001562 max=0.001468 Jy/beam ! Clean residual mean=0.000002 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.0647834 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 151 components and 0.0647833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075236Jy sigma=0.000650 ! Fit after self-cal, rms=0.075249Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160538 Jy ! Component: 100 - total flux cleaned = 0.000142487 Jy ! Component: 150 - total flux cleaned = 0.000142528 Jy ! Component: 200 - total flux cleaned = 0.000111491 Jy ! Total flux subtracted in 200 components = 0.000111491 Jy ! Clean residual min=-0.001580 max=0.001466 Jy/beam ! Clean residual mean=0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.0648948 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 155 components and 0.0648948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075242Jy sigma=0.000650 ! Fit after self-cal, rms=0.075241Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.245 mas, bpa=-2.224 degrees ! Estimated noise=665.127 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 7.245 at -2.224 degrees (North through East) ! Clean map min=-0.0017882 max=0.052164 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.542 mas, bmaj=6.544 mas, bpa=-3.44 degrees ! Estimated noise=1214.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0404308 Jy ! Component: 100 - total flux cleaned = 0.051123 Jy ! Component: 150 - total flux cleaned = 0.0561742 Jy ! Component: 200 - total flux cleaned = 0.0590319 Jy ! Total flux subtracted in 200 components = 0.0590319 Jy ! Clean residual min=-0.003514 max=0.003975 Jy/beam ! Clean residual mean=0.000004 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0590319 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0590319 Jy ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.245 mas, bpa=-2.224 degrees ! Estimated noise=665.127 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268438 Jy ! Component: 100 - total flux cleaned = 0.00408619 Jy ! Component: 150 - total flux cleaned = 0.00504958 Jy ! Component: 200 - total flux cleaned = 0.00538354 Jy ! Total flux subtracted in 200 components = 0.00538354 Jy ! Clean residual min=-0.001576 max=0.001568 Jy/beam ! Clean residual mean=0.000002 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0644155 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 40 components and 0.0644155 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.607 mas, bmaj=11.46 mas, bpa=-7.198 degrees ! Estimated noise=872.368 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000789955 Jy ! Component: 100 - total flux cleaned = 0.000747763 Jy ! Component: 150 - total flux cleaned = 0.000574911 Jy ! Component: 200 - total flux cleaned = 0.000514145 Jy ! Total flux subtracted in 200 components = 0.000514145 Jy ! Clean residual min=-0.001573 max=0.001573 Jy/beam ! Clean residual mean=0.000003 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0649296 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.64628e-05 Jy ! Component: 100 - total flux cleaned = -0.00013061 Jy ! Component: 150 - total flux cleaned = -0.000151688 Jy ! Component: 200 - total flux cleaned = -0.000151256 Jy ! Total flux subtracted in 200 components = -0.000151256 Jy ! Clean residual min=-0.001592 max=0.001525 Jy/beam ! Clean residual mean=0.000002 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.0647783 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 74 components and 0.0647783 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.02 mas, bmaj=7.245 mas, bpa=-2.224 degrees ! Estimated noise=665.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000205998 Jy ! Component: 100 - total flux cleaned = -0.000410401 Jy ! Component: 150 - total flux cleaned = -0.000446949 Jy ! Component: 200 - total flux cleaned = -0.00058641 Jy ! Total flux subtracted in 200 components = -0.00058641 Jy ! Clean residual min=-0.001410 max=0.001420 Jy/beam ! Clean residual mean=0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.0641919 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 0.0641919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075272Jy sigma=0.000651 ! Fit after self-cal, rms=0.075269Jy sigma=0.000650 wmodel J0455+0655_S_2017_07_16_pus_map.mod ! Writing 89 model components to file: J0455+0655_S_2017_07_16_pus_map.mod wobs J0455+0655_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0455+0655_S_2017_07_16_pus_uvs.fits wwins J0455+0655_S_2017_07_16_pus_map.win ! wwins: Wrote 5 windows to J0455+0655_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.35846e-05 Jy ! Component: 100 - total flux cleaned = -4.77685e-05 Jy ! Component: 150 - total flux cleaned = -2.44854e-05 Jy ! Component: 200 - total flux cleaned = -4.6778e-05 Jy ! Component: 250 - total flux cleaned = -4.52191e-06 Jy ! Component: 300 - total flux cleaned = -5.20429e-06 Jy ! Component: 350 - total flux cleaned = -2.56033e-05 Jy ! Component: 400 - total flux cleaned = -2.53102e-05 Jy ! Component: 450 - total flux cleaned = -5.85649e-06 Jy ! Component: 500 - total flux cleaned = 1.3177e-05 Jy ! Component: 550 - total flux cleaned = 3.18632e-05 Jy ! Component: 600 - total flux cleaned = -5.27853e-06 Jy ! Component: 650 - total flux cleaned = -5.17112e-06 Jy ! Component: 700 - total flux cleaned = -5.21047e-06 Jy ! Component: 750 - total flux cleaned = 2.9814e-05 Jy ! Component: 800 - total flux cleaned = 1.27852e-05 Jy ! Component: 850 - total flux cleaned = 6.38285e-05 Jy ! Component: 900 - total flux cleaned = 0.000113956 Jy ! Component: 950 - total flux cleaned = 0.000113717 Jy ! Component: 1000 - total flux cleaned = 0.000146479 Jy ! Component: 1050 - total flux cleaned = 0.000194408 Jy ! Component: 1100 - total flux cleaned = 0.000210123 Jy ! Component: 1150 - total flux cleaned = 0.000288296 Jy ! Component: 1200 - total flux cleaned = 0.000257319 Jy ! Component: 1250 - total flux cleaned = 0.000364529 Jy ! Component: 1300 - total flux cleaned = 0.000394667 Jy ! Component: 1350 - total flux cleaned = 0.000469471 Jy ! Component: 1400 - total flux cleaned = 0.000543132 Jy ! Component: 1450 - total flux cleaned = 0.000601547 Jy ! Component: 1500 - total flux cleaned = 0.000644899 Jy ! Component: 1550 - total flux cleaned = 0.000758882 Jy ! Component: 1600 - total flux cleaned = 0.000815067 Jy ! Component: 1650 - total flux cleaned = 0.000856984 Jy ! Component: 1700 - total flux cleaned = 0.000926071 Jy ! Component: 1750 - total flux cleaned = 0.000980682 Jy ! Component: 1800 - total flux cleaned = 0.00103492 Jy ! Component: 1850 - total flux cleaned = 0.00107492 Jy ! Component: 1900 - total flux cleaned = 0.00108811 Jy ! Component: 1950 - total flux cleaned = 0.00110147 Jy ! Component: 2000 - total flux cleaned = 0.00116657 Jy ! Component: 2050 - total flux cleaned = 0.00119229 Jy ! Component: 2100 - total flux cleaned = 0.00125624 Jy ! Component: 2150 - total flux cleaned = 0.00129411 Jy ! Component: 2200 - total flux cleaned = 0.00133171 Jy ! Component: 2250 - total flux cleaned = 0.00133158 Jy ! Component: 2300 - total flux cleaned = 0.00136855 Jy ! Component: 2350 - total flux cleaned = 0.00135632 Jy ! Component: 2400 - total flux cleaned = 0.00138068 Jy ! Component: 2450 - total flux cleaned = 0.00141661 Jy ! Component: 2500 - total flux cleaned = 0.00139287 Jy ! Component: 2550 - total flux cleaned = 0.00142817 Jy ! Component: 2600 - total flux cleaned = 0.00139335 Jy ! Component: 2650 - total flux cleaned = 0.00140496 Jy ! Component: 2700 - total flux cleaned = 0.0014278 Jy ! Component: 2750 - total flux cleaned = 0.00142788 Jy ! Component: 2800 - total flux cleaned = 0.0014392 Jy ! Component: 2850 - total flux cleaned = 0.00147273 Jy ! Component: 2900 - total flux cleaned = 0.00147279 Jy ! Component: 2950 - total flux cleaned = 0.00150564 Jy ! Component: 3000 - total flux cleaned = 0.00150557 Jy ! Component: 3050 - total flux cleaned = 0.00152716 Jy ! Component: 3100 - total flux cleaned = 0.00151653 Jy ! Component: 3150 - total flux cleaned = 0.00153788 Jy ! Component: 3200 - total flux cleaned = 0.00151667 Jy ! Component: 3250 - total flux cleaned = 0.0015063 Jy ! Component: 3300 - total flux cleaned = 0.00152705 Jy ! Component: 3350 - total flux cleaned = 0.00151674 Jy ! Component: 3400 - total flux cleaned = 0.0015373 Jy ! Component: 3450 - total flux cleaned = 0.00153715 Jy ! Component: 3500 - total flux cleaned = 0.00153704 Jy ! Component: 3550 - total flux cleaned = 0.00155719 Jy ! Component: 3600 - total flux cleaned = 0.00153719 Jy ! Component: 3650 - total flux cleaned = 0.00156699 Jy ! Component: 3700 - total flux cleaned = 0.00157684 Jy ! Component: 3750 - total flux cleaned = 0.00156705 Jy ! Component: 3800 - total flux cleaned = 0.00159643 Jy ! Component: 3850 - total flux cleaned = 0.00161569 Jy ! Component: 3900 - total flux cleaned = 0.00163498 Jy ! Component: 3950 - total flux cleaned = 0.00160615 Jy ! Component: 4000 - total flux cleaned = 0.0015967 Jy ! Component: 4050 - total flux cleaned = 0.0016251 Jy ! Total flux subtracted in 4096 components = 0.00159687 Jy ! Clean residual min=-0.000617 max=0.000550 Jy/beam ! Clean residual mean=0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.0657888 Jy keep ! Adding 286 model components to the UV plane model. ! The established model now contains 375 components and 0.0657888 Jy ![Exited script file: muppet] wmap "J0455+0655_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 7.245 at -2.224 degrees (North through East) ! Clean map min=-0.00144 max=0.0522 Jy/beam ! Writing clean map to FITS file: J0455+0655_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0522001 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00017044 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.979536 0.979536 1.95907 3.91814 7.83629 15.6726 31.3452 62.6903 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.02 x 7.245 at -2.224 degrees (North through East) ! Clean map min=-0.00144 max=0.0522 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0455+0655_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:01:38 2019