! Started logfile: J0453-3949_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:55 2019 obs J0453-3949_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0453-3949_S_2017_10_21_pus_uva.fits ! AN table 1: 72 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.506173 visibilities/baseline/integration-bin. ! Found source: J0453-3949 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 5248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0453-3949_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 221 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 441 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.956320Jy sigma=0.006457 ! Fit after self-cal, rms=0.917129Jy sigma=0.006225 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.813 mas, bmaj=31.59 mas, bpa=-29.35 degrees ! Estimated noise=3157.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685051 Jy ! Component: 100 - total flux cleaned = 0.0835973 Jy ! Total flux subtracted in 100 components = 0.0835973 Jy ! Clean residual min=-0.007148 max=0.006433 Jy/beam ! Clean residual mean=-0.000032 rms=0.002233 Jy/beam ! Combined flux in latest and established models = 0.0835973 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0835973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107914Jy sigma=0.000686 ! Fit after self-cal, rms=0.107722Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.398 mas, bmaj=31.59 mas, bpa=-29.78 degrees ! Estimated noise=1695.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00600382 Jy ! Component: 100 - total flux cleaned = 0.00973228 Jy ! Component: 150 - total flux cleaned = 0.0123918 Jy ! Component: 200 - total flux cleaned = 0.014353 Jy ! Total flux subtracted in 200 components = 0.014353 Jy ! Clean residual min=-0.004609 max=0.005034 Jy/beam ! Clean residual mean=-0.000068 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 0.0979504 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 36 components and 0.0979504 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107283Jy sigma=0.000683 ! Fit after self-cal, rms=0.107304Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00* KP 1.14 ! LA 1.12 MK 0.95 NL 1.00* OV 0.98 ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.00* KP 1.11 ! LA 1.01 MK 1.05 NL 0.99 OV 0.98 ! PT 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.00* KP 1.00 ! LA 0.81 MK 1.08 NL 1.10 OV 1.00 ! PT 0.83 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.107304Jy sigma=0.000683 ! Fit after self-cal, rms=0.106268Jy sigma=0.000681 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.551 mas, bmaj=31.06 mas, bpa=-29.79 degrees ! Estimated noise=1770.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00074368 Jy ! Component: 100 - total flux cleaned = 0.0005655 Jy ! Component: 150 - total flux cleaned = 0.000419248 Jy ! Component: 200 - total flux cleaned = 0.000325219 Jy ! Total flux subtracted in 200 components = 0.000325219 Jy ! Clean residual min=-0.003537 max=0.003560 Jy/beam ! Clean residual mean=0.000019 rms=0.001053 Jy/beam ! Combined flux in latest and established models = 0.0982756 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 0.0982756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106223Jy sigma=0.000681 ! Fit after self-cal, rms=0.106375Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106375Jy sigma=0.000680 ! Fit after self-cal, rms=0.106445Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.562 mas, bmaj=31.07 mas, bpa=-29.79 degrees ! Estimated noise=1768.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000122613 Jy ! Component: 100 - total flux cleaned = -6.2194e-05 Jy ! Component: 150 - total flux cleaned = -0.000260884 Jy ! Component: 200 - total flux cleaned = -0.000380985 Jy ! Total flux subtracted in 200 components = -0.000380985 Jy ! Clean residual min=-0.003352 max=0.003353 Jy/beam ! Clean residual mean=0.000021 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.0978946 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 78 components and 0.0978946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106415Jy sigma=0.000680 ! Fit after self-cal, rms=0.106508Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000119212 Jy ! Component: 100 - total flux cleaned = 6.19227e-05 Jy ! Component: 150 - total flux cleaned = 3.44853e-05 Jy ! Component: 200 - total flux cleaned = -1.71462e-05 Jy ! Total flux subtracted in 200 components = -1.71462e-05 Jy ! Clean residual min=-0.003412 max=0.003489 Jy/beam ! Clean residual mean=0.000013 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.0978775 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 93 components and 0.0978775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106490Jy sigma=0.000680 ! Fit after self-cal, rms=0.106492Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106492Jy sigma=0.000680 ! Fit after self-cal, rms=0.106669Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=31.1 mas, bpa=-29.79 degrees ! Estimated noise=1768.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000344423 Jy ! Component: 100 - total flux cleaned = -0.000482102 Jy ! Component: 150 - total flux cleaned = -0.000583744 Jy ! Component: 200 - total flux cleaned = -0.000653836 Jy ! Total flux subtracted in 200 components = -0.000653836 Jy ! Clean residual min=-0.003153 max=0.003276 Jy/beam ! Clean residual mean=0.000022 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.0972236 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 96 components and 0.0972236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106653Jy sigma=0.000680 ! Fit after self-cal, rms=0.106686Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13591e-07 Jy ! Component: 100 - total flux cleaned = -4.62775e-05 Jy ! Component: 150 - total flux cleaned = -9.05442e-05 Jy ! Component: 200 - total flux cleaned = -0.000111023 Jy ! Total flux subtracted in 200 components = -0.000111023 Jy ! Clean residual min=-0.003188 max=0.003347 Jy/beam ! Clean residual mean=0.000018 rms=0.000961 Jy/beam ! Combined flux in latest and established models = 0.0971126 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 0.0971126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106675Jy sigma=0.000680 ! Fit after self-cal, rms=0.106675Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106675Jy sigma=0.000680 ! Fit after self-cal, rms=0.106809Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.73 mas, bmaj=45.03 mas, bpa=-15.48 degrees ! Estimated noise=2065.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029585 Jy ! Component: 100 - total flux cleaned = -0.000421404 Jy ! Component: 150 - total flux cleaned = -0.000513143 Jy ! Component: 200 - total flux cleaned = -0.00057651 Jy ! Total flux subtracted in 200 components = -0.00057651 Jy ! Clean residual min=-0.003112 max=0.004301 Jy/beam ! Clean residual mean=0.000034 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 0.0965361 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 121 components and 0.0965361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106805Jy sigma=0.000680 ! Fit after self-cal, rms=0.106818Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125273 Jy ! Component: 100 - total flux cleaned = -0.00026152 Jy ! Component: 150 - total flux cleaned = -0.00036545 Jy ! Component: 200 - total flux cleaned = -0.000443976 Jy ! Total flux subtracted in 200 components = -0.000443976 Jy ! Clean residual min=-0.003132 max=0.004375 Jy/beam ! Clean residual mean=0.000031 rms=0.001123 Jy/beam ! Combined flux in latest and established models = 0.0960921 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 125 components and 0.0960921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106817Jy sigma=0.000680 ! Fit after self-cal, rms=0.106810Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=31.13 mas, bpa=-29.79 degrees ! Estimated noise=1768.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.576 x 31.13 at -29.79 degrees (North through East) ! Clean map min=-0.0041146 max=0.082795 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=30.86 mas, bpa=-29.51 degrees ! Estimated noise=3347.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0700013 Jy ! Component: 100 - total flux cleaned = 0.0854254 Jy ! Component: 150 - total flux cleaned = 0.0891812 Jy ! Component: 200 - total flux cleaned = 0.091257 Jy ! Total flux subtracted in 200 components = 0.091257 Jy ! Clean residual min=-0.005401 max=0.005470 Jy/beam ! Clean residual mean=0.000015 rms=0.001575 Jy/beam ! Combined flux in latest and established models = 0.091257 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.091257 Jy ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=31.13 mas, bpa=-29.79 degrees ! Estimated noise=1768.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290698 Jy ! Component: 100 - total flux cleaned = 0.00342772 Jy ! Component: 150 - total flux cleaned = 0.00357103 Jy ! Component: 200 - total flux cleaned = 0.00374599 Jy ! Total flux subtracted in 200 components = 0.00374599 Jy ! Clean residual min=-0.003801 max=0.003460 Jy/beam ! Clean residual mean=0.000017 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.095003 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.095003 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.73 mas, bmaj=45.03 mas, bpa=-15.48 degrees ! Estimated noise=2065.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157431 Jy ! Component: 100 - total flux cleaned = -0.000158272 Jy ! Component: 150 - total flux cleaned = -4.16843e-05 Jy ! Component: 200 - total flux cleaned = -0.000108665 Jy ! Total flux subtracted in 200 components = -0.000108665 Jy ! Clean residual min=-0.003378 max=0.004398 Jy/beam ! Clean residual mean=0.000026 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.0948943 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.96641e-05 Jy ! Component: 100 - total flux cleaned = -8.6144e-05 Jy ! Component: 150 - total flux cleaned = -0.000165053 Jy ! Component: 200 - total flux cleaned = -0.000215262 Jy ! Total flux subtracted in 200 components = -0.000215262 Jy ! Clean residual min=-0.003260 max=0.004415 Jy/beam ! Clean residual mean=0.000025 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.0946791 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.0946791 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=31.13 mas, bpa=-29.79 degrees ! Estimated noise=1768.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.1401e-05 Jy ! Component: 100 - total flux cleaned = 0.000156368 Jy ! Component: 150 - total flux cleaned = 0.00024227 Jy ! Component: 200 - total flux cleaned = 0.00027916 Jy ! Total flux subtracted in 200 components = 0.00027916 Jy ! Clean residual min=-0.003312 max=0.003545 Jy/beam ! Clean residual mean=0.000017 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.0949582 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.0949582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106846Jy sigma=0.000680 ! Fit after self-cal, rms=0.106819Jy sigma=0.000680 wmodel J0453-3949_S_2017_10_21_pus_map.mod ! Writing 87 model components to file: J0453-3949_S_2017_10_21_pus_map.mod wobs J0453-3949_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0453-3949_S_2017_10_21_pus_uvs.fits wwins J0453-3949_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0453-3949_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000577243 Jy ! Component: 100 - total flux cleaned = 0.000674826 Jy ! Component: 150 - total flux cleaned = 0.00110261 Jy ! Component: 200 - total flux cleaned = 0.0015818 Jy ! Component: 250 - total flux cleaned = 0.00198897 Jy ! Component: 300 - total flux cleaned = 0.0021801 Jy ! Component: 350 - total flux cleaned = 0.00218043 Jy ! Component: 400 - total flux cleaned = 0.00225078 Jy ! Component: 450 - total flux cleaned = 0.00221691 Jy ! Component: 500 - total flux cleaned = 0.00221647 Jy ! Component: 550 - total flux cleaned = 0.002154 Jy ! Component: 600 - total flux cleaned = 0.0021239 Jy ! Component: 650 - total flux cleaned = 0.00212444 Jy ! Component: 700 - total flux cleaned = 0.00209665 Jy ! Component: 750 - total flux cleaned = 0.00209672 Jy ! Component: 800 - total flux cleaned = 0.00209623 Jy ! Component: 850 - total flux cleaned = 0.00217564 Jy ! Component: 900 - total flux cleaned = 0.00228037 Jy ! Component: 950 - total flux cleaned = 0.00233242 Jy ! Component: 1000 - total flux cleaned = 0.0024609 Jy ! Component: 1050 - total flux cleaned = 0.00258869 Jy ! Component: 1100 - total flux cleaned = 0.00256321 Jy ! Component: 1150 - total flux cleaned = 0.00258905 Jy ! Component: 1200 - total flux cleaned = 0.00264099 Jy ! Component: 1250 - total flux cleaned = 0.00269418 Jy ! Component: 1300 - total flux cleaned = 0.00274886 Jy ! Component: 1350 - total flux cleaned = 0.00280497 Jy ! Component: 1400 - total flux cleaned = 0.00286157 Jy ! Component: 1450 - total flux cleaned = 0.00291961 Jy ! Component: 1500 - total flux cleaned = 0.0029794 Jy ! Component: 1550 - total flux cleaned = 0.00307128 Jy ! Component: 1600 - total flux cleaned = 0.0031343 Jy ! Component: 1650 - total flux cleaned = 0.00323225 Jy ! Component: 1700 - total flux cleaned = 0.00329867 Jy ! Component: 1750 - total flux cleaned = 0.00340133 Jy ! Component: 1800 - total flux cleaned = 0.0035076 Jy ! Component: 1850 - total flux cleaned = 0.00361762 Jy ! Component: 1900 - total flux cleaned = 0.00369328 Jy ! Component: 1950 - total flux cleaned = 0.00380981 Jy ! Component: 2000 - total flux cleaned = 0.00392984 Jy ! Component: 2050 - total flux cleaned = 0.0040123 Jy ! Component: 2100 - total flux cleaned = 0.00414051 Jy ! Component: 2150 - total flux cleaned = 0.00427241 Jy ! Component: 2200 - total flux cleaned = 0.00440876 Jy ! Component: 2250 - total flux cleaned = 0.00454876 Jy ! Component: 2300 - total flux cleaned = 0.00474212 Jy ! Component: 2350 - total flux cleaned = 0.00484237 Jy ! Component: 2400 - total flux cleaned = 0.00504884 Jy ! Component: 2450 - total flux cleaned = 0.00520998 Jy ! Component: 2500 - total flux cleaned = 0.00537658 Jy ! Component: 2550 - total flux cleaned = 0.0055485 Jy ! Component: 2600 - total flux cleaned = 0.00572633 Jy ! Component: 2650 - total flux cleaned = 0.00591064 Jy ! Component: 2700 - total flux cleaned = 0.00610111 Jy ! Component: 2750 - total flux cleaned = 0.00623221 Jy ! Component: 2800 - total flux cleaned = 0.00643648 Jy ! Component: 2850 - total flux cleaned = 0.00657794 Jy ! Component: 2900 - total flux cleaned = 0.00672304 Jy ! Component: 2950 - total flux cleaned = 0.0069491 Jy ! Component: 3000 - total flux cleaned = 0.00718382 Jy ! Component: 3050 - total flux cleaned = 0.00734574 Jy ! Component: 3100 - total flux cleaned = 0.00751141 Jy ! Component: 3150 - total flux cleaned = 0.00785628 Jy ! Component: 3200 - total flux cleaned = 0.00803617 Jy ! Component: 3250 - total flux cleaned = 0.00831469 Jy ! Component: 3300 - total flux cleaned = 0.00850679 Jy ! Component: 3350 - total flux cleaned = 0.00880418 Jy ! Component: 3400 - total flux cleaned = 0.00911379 Jy ! Component: 3450 - total flux cleaned = 0.00932564 Jy ! Component: 3500 - total flux cleaned = 0.00965577 Jy ! Component: 3550 - total flux cleaned = 0.00988309 Jy ! Component: 3600 - total flux cleaned = 0.0102358 Jy ! Component: 3650 - total flux cleaned = 0.0106018 Jy ! Component: 3700 - total flux cleaned = 0.0108523 Jy ! Component: 3750 - total flux cleaned = 0.0112428 Jy ! Component: 3800 - total flux cleaned = 0.0116507 Jy ! Component: 3850 - total flux cleaned = 0.011928 Jy ! Component: 3900 - total flux cleaned = 0.0123605 Jy ! Component: 3950 - total flux cleaned = 0.0128141 Jy ! Component: 4000 - total flux cleaned = 0.0132831 Jy ! Component: 4050 - total flux cleaned = 0.0137715 Jy ! Total flux subtracted in 4096 components = 0.0139378 Jy ! Clean residual min=-0.009451 max=0.009298 Jy/beam ! Clean residual mean=0.000185 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 0.108896 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 256 components and 0.108896 Jy ![Exited script file: muppet] wmap "J0453-3949_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.576 x 31.13 at -29.79 degrees (North through East) ! Clean map min=-0.022631 max=0.081092 Jy/beam ! Writing clean map to FITS file: J0453-3949_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0810917 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00328122 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -12.1389 12.1389 24.2778 48.5557 97.1114 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0098 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.576 x 31.13 at -29.79 degrees (North through East) ! Clean map min=-0.022631 max=0.081092 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0453-3949_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:51:00 2019