! Started logfile: J0453-3949_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:14 2019 obs J0453-3949_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0453-3949_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.312452 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0453-3949 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 6524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0453-3949_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 575 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 575 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 545 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1098 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.950487Jy sigma=0.005695 ! Fit after self-cal, rms=0.911232Jy sigma=0.005481 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.698 mas, bmaj=49.88 mas, bpa=-21.55 degrees ! Estimated noise=3510.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0719758 Jy ! Component: 100 - total flux cleaned = 0.0882554 Jy ! Total flux subtracted in 100 components = 0.0882554 Jy ! Clean residual min=-0.008033 max=0.008325 Jy/beam ! Clean residual mean=-0.000007 rms=0.002368 Jy/beam ! Combined flux in latest and established models = 0.0882554 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0882554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114792Jy sigma=0.000595 ! Fit after self-cal, rms=0.114361Jy sigma=0.000593 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=51.91 mas, bpa=-21.8 degrees ! Estimated noise=1740.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764373 Jy ! Component: 100 - total flux cleaned = 0.0100457 Jy ! Component: 150 - total flux cleaned = 0.0103606 Jy ! Component: 200 - total flux cleaned = 0.0102007 Jy ! Total flux subtracted in 200 components = 0.0102007 Jy ! Clean residual min=-0.003592 max=0.003745 Jy/beam ! Clean residual mean=0.000045 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 0.0984561 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 57 components and 0.0984561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113711Jy sigma=0.000591 ! Fit after self-cal, rms=0.113530Jy sigma=0.000590 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.06 ! LA 1.03 MK 1.03 NL 0.91 OV 1.00* ! PT 1.06 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 0.99 ! LA 0.98 MK 1.00 NL 0.98 OV 1.00* ! PT 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.91 ! LA 0.83 MK 1.05 NL 1.02 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.113530Jy sigma=0.000590 ! Fit after self-cal, rms=0.109233Jy sigma=0.000592 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.814 mas, bmaj=51.93 mas, bpa=-21.72 degrees ! Estimated noise=1771.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564202 Jy ! Component: 100 - total flux cleaned = 0.0008247 Jy ! Component: 150 - total flux cleaned = 0.000932008 Jy ! Component: 200 - total flux cleaned = 0.000888611 Jy ! Total flux subtracted in 200 components = 0.000888611 Jy ! Clean residual min=-0.002659 max=0.003005 Jy/beam ! Clean residual mean=0.000085 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.0993447 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 87 components and 0.0993447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109147Jy sigma=0.000591 ! Fit after self-cal, rms=0.108944Jy sigma=0.000591 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108944Jy sigma=0.000591 ! Fit after self-cal, rms=0.108351Jy sigma=0.000590 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=51.87 mas, bpa=-21.72 degrees ! Estimated noise=1766.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.62234e-05 Jy ! Component: 100 - total flux cleaned = 0.00032421 Jy ! Component: 150 - total flux cleaned = 0.000362286 Jy ! Component: 200 - total flux cleaned = 0.000327653 Jy ! Total flux subtracted in 200 components = 0.000327653 Jy ! Clean residual min=-0.002557 max=0.003033 Jy/beam ! Clean residual mean=0.000055 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.0996723 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 122 components and 0.0996723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108304Jy sigma=0.000590 ! Fit after self-cal, rms=0.108316Jy sigma=0.000590 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.98866e-05 Jy ! Component: 100 - total flux cleaned = 3.02843e-05 Jy ! Component: 150 - total flux cleaned = -4.38596e-06 Jy ! Component: 200 - total flux cleaned = -3.47625e-05 Jy ! Total flux subtracted in 200 components = -3.47625e-05 Jy ! Clean residual min=-0.002767 max=0.003044 Jy/beam ! Clean residual mean=0.000059 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0996376 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 147 components and 0.0996376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108288Jy sigma=0.000590 ! Fit after self-cal, rms=0.108293Jy sigma=0.000590 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108293Jy sigma=0.000590 ! Fit after self-cal, rms=0.107843Jy sigma=0.000590 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.818 mas, bmaj=51.74 mas, bpa=-21.7 degrees ! Estimated noise=1759.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167262 Jy ! Component: 100 - total flux cleaned = -0.000170428 Jy ! Component: 150 - total flux cleaned = -0.000253971 Jy ! Component: 200 - total flux cleaned = -0.000351903 Jy ! Total flux subtracted in 200 components = -0.000351903 Jy ! Clean residual min=-0.002791 max=0.003038 Jy/beam ! Clean residual mean=0.000035 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.0992857 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 156 components and 0.0992857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107822Jy sigma=0.000590 ! Fit after self-cal, rms=0.107833Jy sigma=0.000590 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.54869e-05 Jy ! Component: 100 - total flux cleaned = -0.000143218 Jy ! Component: 150 - total flux cleaned = -0.000214646 Jy ! Component: 200 - total flux cleaned = -0.000280527 Jy ! Total flux subtracted in 200 components = -0.000280527 Jy ! Clean residual min=-0.002755 max=0.002959 Jy/beam ! Clean residual mean=0.000039 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.0990052 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 171 components and 0.0990052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107818Jy sigma=0.000590 ! Fit after self-cal, rms=0.107820Jy sigma=0.000590 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107820Jy sigma=0.000590 ! Fit after self-cal, rms=0.107649Jy sigma=0.000590 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12 mas, bmaj=63.33 mas, bpa=-14.27 degrees ! Estimated noise=2007.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000281642 Jy ! Component: 100 - total flux cleaned = -0.000485455 Jy ! Component: 150 - total flux cleaned = -0.0005903 Jy ! Component: 200 - total flux cleaned = -0.000660546 Jy ! Total flux subtracted in 200 components = -0.000660546 Jy ! Clean residual min=-0.002560 max=0.002835 Jy/beam ! Clean residual mean=0.000038 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.0983446 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 191 components and 0.0983446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107639Jy sigma=0.000590 ! Fit after self-cal, rms=0.107638Jy sigma=0.000590 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.52182e-05 Jy ! Component: 100 - total flux cleaned = -0.000153321 Jy ! Component: 150 - total flux cleaned = -0.00023718 Jy ! Component: 200 - total flux cleaned = -0.000260551 Jy ! Total flux subtracted in 200 components = -0.000260551 Jy ! Clean residual min=-0.002534 max=0.002797 Jy/beam ! Clean residual mean=0.000040 rms=0.000906 Jy/beam ! Combined flux in latest and established models = 0.0980841 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 213 components and 0.0980841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107632Jy sigma=0.000590 ! Fit after self-cal, rms=0.107632Jy sigma=0.000590 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=51.66 mas, bpa=-21.69 degrees ! Estimated noise=1756.68 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.821 x 51.66 at -21.69 degrees (North through East) ! Clean map min=-0.006604 max=0.093405 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.842 mas, bmaj=48.26 mas, bpa=-21.62 degrees ! Estimated noise=3440.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0712458 Jy ! Component: 100 - total flux cleaned = 0.0876796 Jy ! Component: 150 - total flux cleaned = 0.0921313 Jy ! Component: 200 - total flux cleaned = 0.0931507 Jy ! Total flux subtracted in 200 components = 0.0931507 Jy ! Clean residual min=-0.008117 max=0.009058 Jy/beam ! Clean residual mean=-0.000001 rms=0.002267 Jy/beam ! Combined flux in latest and established models = 0.0931507 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.0931507 Jy ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=51.66 mas, bpa=-21.69 degrees ! Estimated noise=1756.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00399349 Jy ! Component: 100 - total flux cleaned = 0.00515807 Jy ! Component: 150 - total flux cleaned = 0.00614482 Jy ! Component: 200 - total flux cleaned = 0.00650951 Jy ! Total flux subtracted in 200 components = 0.00650951 Jy ! Clean residual min=-0.003091 max=0.003412 Jy/beam ! Clean residual mean=0.000034 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 0.0996602 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 72 components and 0.0996602 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=12 mas, bmaj=63.33 mas, bpa=-14.27 degrees ! Estimated noise=2007.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07576e-06 Jy ! Component: 100 - total flux cleaned = -0.000365485 Jy ! Component: 150 - total flux cleaned = -0.000687385 Jy ! Component: 200 - total flux cleaned = -0.000809278 Jy ! Total flux subtracted in 200 components = -0.000809278 Jy ! Clean residual min=-0.002618 max=0.003109 Jy/beam ! Clean residual mean=0.000045 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.098851 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000112509 Jy ! Component: 100 - total flux cleaned = -0.000216513 Jy ! Component: 150 - total flux cleaned = -0.00031164 Jy ! Component: 200 - total flux cleaned = -0.000370984 Jy ! Total flux subtracted in 200 components = -0.000370984 Jy ! Clean residual min=-0.002576 max=0.002978 Jy/beam ! Clean residual mean=0.000044 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.09848 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 118 components and 0.09848 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=51.66 mas, bpa=-21.69 degrees ! Estimated noise=1756.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222425 Jy ! Component: 100 - total flux cleaned = 0.000174649 Jy ! Component: 150 - total flux cleaned = 0.000176421 Jy ! Component: 200 - total flux cleaned = 9.93437e-05 Jy ! Total flux subtracted in 200 components = 9.93437e-05 Jy ! Clean residual min=-0.002738 max=0.002966 Jy/beam ! Clean residual mean=0.000033 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.0985793 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 146 components and 0.0985793 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107655Jy sigma=0.000590 ! Fit after self-cal, rms=0.107664Jy sigma=0.000590 wmodel J0453-3949_S_2017_10_09_pus_map.mod ! Writing 146 model components to file: J0453-3949_S_2017_10_09_pus_map.mod wobs J0453-3949_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0453-3949_S_2017_10_09_pus_uvs.fits wwins J0453-3949_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0453-3949_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047691 Jy ! Component: 100 - total flux cleaned = 0.000866979 Jy ! Component: 150 - total flux cleaned = 0.000946847 Jy ! Component: 200 - total flux cleaned = 0.000838948 Jy ! Component: 250 - total flux cleaned = 0.000632536 Jy ! Component: 300 - total flux cleaned = 0.000501803 Jy ! Component: 350 - total flux cleaned = 0.000470971 Jy ! Component: 400 - total flux cleaned = 0.000441668 Jy ! Component: 450 - total flux cleaned = 0.000442514 Jy ! Component: 500 - total flux cleaned = 0.000497639 Jy ! Component: 550 - total flux cleaned = 0.000498312 Jy ! Component: 600 - total flux cleaned = 0.00054813 Jy ! Component: 650 - total flux cleaned = 0.000548214 Jy ! Component: 700 - total flux cleaned = 0.000594531 Jy ! Component: 750 - total flux cleaned = 0.000594796 Jy ! Component: 800 - total flux cleaned = 0.000681825 Jy ! Component: 850 - total flux cleaned = 0.000681362 Jy ! Component: 900 - total flux cleaned = 0.000640139 Jy ! Component: 950 - total flux cleaned = 0.00068041 Jy ! Component: 1000 - total flux cleaned = 0.000719371 Jy ! Component: 1050 - total flux cleaned = 0.000738339 Jy ! Component: 1100 - total flux cleaned = 0.000775867 Jy ! Component: 1150 - total flux cleaned = 0.000794314 Jy ! Component: 1200 - total flux cleaned = 0.000866622 Jy ! Component: 1250 - total flux cleaned = 0.000902073 Jy ! Component: 1300 - total flux cleaned = 0.00100609 Jy ! Component: 1350 - total flux cleaned = 0.0011419 Jy ! Component: 1400 - total flux cleaned = 0.00119194 Jy ! Component: 1450 - total flux cleaned = 0.00127446 Jy ! Component: 1500 - total flux cleaned = 0.00137186 Jy ! Component: 1550 - total flux cleaned = 0.00149992 Jy ! Component: 1600 - total flux cleaned = 0.00156319 Jy ! Component: 1650 - total flux cleaned = 0.00165671 Jy ! Component: 1700 - total flux cleaned = 0.00171797 Jy ! Component: 1750 - total flux cleaned = 0.00176347 Jy ! Component: 1800 - total flux cleaned = 0.00179357 Jy ! Component: 1850 - total flux cleaned = 0.00183835 Jy ! Component: 1900 - total flux cleaned = 0.00186798 Jy ! Component: 1950 - total flux cleaned = 0.00191214 Jy ! Component: 2000 - total flux cleaned = 0.00191221 Jy ! Component: 2050 - total flux cleaned = 0.00195585 Jy ! Component: 2100 - total flux cleaned = 0.00198465 Jy ! Component: 2150 - total flux cleaned = 0.00198456 Jy ! Component: 2200 - total flux cleaned = 0.00198453 Jy ! Component: 2250 - total flux cleaned = 0.00199867 Jy ! Component: 2300 - total flux cleaned = 0.00198468 Jy ! Component: 2350 - total flux cleaned = 0.00198469 Jy ! Component: 2400 - total flux cleaned = 0.00195677 Jy ! Component: 2450 - total flux cleaned = 0.00195676 Jy ! Component: 2500 - total flux cleaned = 0.00192899 Jy ! Component: 2550 - total flux cleaned = 0.00186006 Jy ! Component: 2600 - total flux cleaned = 0.00184631 Jy ! Component: 2650 - total flux cleaned = 0.00180523 Jy ! Component: 2700 - total flux cleaned = 0.00177783 Jy ! Component: 2750 - total flux cleaned = 0.00172308 Jy ! Component: 2800 - total flux cleaned = 0.00170941 Jy ! Component: 2850 - total flux cleaned = 0.00169568 Jy ! Component: 2900 - total flux cleaned = 0.00168201 Jy ! Component: 2950 - total flux cleaned = 0.00164089 Jy ! Component: 3000 - total flux cleaned = 0.00164088 Jy ! Component: 3050 - total flux cleaned = 0.00164085 Jy ! Component: 3100 - total flux cleaned = 0.00157212 Jy ! Component: 3150 - total flux cleaned = 0.0015447 Jy ! Component: 3200 - total flux cleaned = 0.00150323 Jy ! Component: 3250 - total flux cleaned = 0.0014618 Jy ! Component: 3300 - total flux cleaned = 0.00142021 Jy ! Component: 3350 - total flux cleaned = 0.00136459 Jy ! Component: 3400 - total flux cleaned = 0.00132284 Jy ! Component: 3450 - total flux cleaned = 0.00125291 Jy ! Component: 3500 - total flux cleaned = 0.00121089 Jy ! Component: 3550 - total flux cleaned = 0.00118283 Jy ! Component: 3600 - total flux cleaned = 0.00112653 Jy ! Component: 3650 - total flux cleaned = 0.00104163 Jy ! Component: 3700 - total flux cleaned = 0.000984862 Jy ! Component: 3750 - total flux cleaned = 0.000927873 Jy ! Component: 3800 - total flux cleaned = 0.000842115 Jy ! Component: 3850 - total flux cleaned = 0.000756055 Jy ! Component: 3900 - total flux cleaned = 0.000756143 Jy ! Component: 3950 - total flux cleaned = 0.000640703 Jy ! Component: 4000 - total flux cleaned = 0.000553795 Jy ! Component: 4050 - total flux cleaned = 0.000510122 Jy ! Total flux subtracted in 4096 components = 0.000451775 Jy ! Clean residual min=-0.000868 max=0.000771 Jy/beam ! Clean residual mean=-0.000010 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0990311 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 440 components and 0.0990311 Jy ![Exited script file: muppet] wmap "J0453-3949_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.821 x 51.66 at -21.69 degrees (North through East) ! Clean map min=-0.0058204 max=0.091555 Jy/beam ! Writing clean map to FITS file: J0453-3949_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0915548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000386734 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.26722 1.26722 2.53444 5.06888 10.1378 20.2755 40.551 81.102 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.821 x 51.66 at -21.69 degrees (North through East) ! Clean map min=-0.0058204 max=0.091555 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0453-3949_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:20 2019