! Started logfile: J0453-3949_S_2017_07_16_pus_uvs.log on Thu May 9 11:01:28 2019 obs J0453-3949_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0453-3949_S_2017_07_16_pus_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.328889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0453-3949 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 8288 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0453-3949_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 566 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 606 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 746 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1400 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.964979Jy sigma=0.006087 ! Fit after self-cal, rms=0.923213Jy sigma=0.005842 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=5.922 mas, bpa=-1.745 degrees ! Estimated noise=2432.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0621118 Jy ! Component: 100 - total flux cleaned = 0.0761098 Jy ! Total flux subtracted in 100 components = 0.0761098 Jy ! Clean residual min=-0.005413 max=0.006408 Jy/beam ! Clean residual mean=-0.000055 rms=0.001454 Jy/beam ! Combined flux in latest and established models = 0.0761098 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0761098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097633Jy sigma=0.000608 ! Fit after self-cal, rms=0.097113Jy sigma=0.000605 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=6.902 mas, bpa=-1.399 degrees ! Estimated noise=1554.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645066 Jy ! Component: 100 - total flux cleaned = 0.00902137 Jy ! Component: 150 - total flux cleaned = 0.0101726 Jy ! Component: 200 - total flux cleaned = 0.0102039 Jy ! Total flux subtracted in 200 components = 0.0102039 Jy ! Clean residual min=-0.003533 max=0.003331 Jy/beam ! Clean residual mean=-0.000032 rms=0.000904 Jy/beam ! Combined flux in latest and established models = 0.0863137 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 14 components and 0.0863137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096735Jy sigma=0.000602 ! Fit after self-cal, rms=0.096671Jy sigma=0.000602 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 1.02 MK 1.02 NL 1.00* OV 1.03 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.03 ! LA 0.95 MK 1.04 NL 1.00* OV 1.01 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 1.00* MK 0.94 NL 1.00* OV 1.03 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.096671Jy sigma=0.000602 ! Fit after self-cal, rms=0.097017Jy sigma=0.000601 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.516 mas, bmaj=6.887 mas, bpa=-1.571 degrees ! Estimated noise=1564.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000245336 Jy ! Component: 100 - total flux cleaned = -0.000278275 Jy ! Component: 150 - total flux cleaned = -0.000306028 Jy ! Component: 200 - total flux cleaned = -0.000328529 Jy ! Total flux subtracted in 200 components = -0.000328529 Jy ! Clean residual min=-0.003562 max=0.003032 Jy/beam ! Clean residual mean=-0.000010 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 0.0859851 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 18 components and 0.0859851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096993Jy sigma=0.000601 ! Fit after self-cal, rms=0.097036Jy sigma=0.000601 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097036Jy sigma=0.000601 ! Fit after self-cal, rms=0.097260Jy sigma=0.000600 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=6.872 mas, bpa=-1.585 degrees ! Estimated noise=1566.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212114 Jy ! Component: 100 - total flux cleaned = 0.000212984 Jy ! Component: 150 - total flux cleaned = 0.000191543 Jy ! Component: 200 - total flux cleaned = 0.00019116 Jy ! Total flux subtracted in 200 components = 0.00019116 Jy ! Clean residual min=-0.003399 max=0.003020 Jy/beam ! Clean residual mean=-0.000004 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0861763 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.0861763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097245Jy sigma=0.000600 ! Fit after self-cal, rms=0.097276Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.87352e-05 Jy ! Component: 100 - total flux cleaned = 2.65384e-05 Jy ! Component: 150 - total flux cleaned = 2.66789e-05 Jy ! Component: 200 - total flux cleaned = 2.75904e-05 Jy ! Total flux subtracted in 200 components = 2.75904e-05 Jy ! Clean residual min=-0.003343 max=0.003078 Jy/beam ! Clean residual mean=-0.000007 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0862039 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.0862039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097266Jy sigma=0.000600 ! Fit after self-cal, rms=0.097251Jy sigma=0.000600 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097251Jy sigma=0.000600 ! Fit after self-cal, rms=0.097239Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.52 mas, bmaj=6.844 mas, bpa=-1.563 degrees ! Estimated noise=1564.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000426251 Jy ! Component: 100 - total flux cleaned = 0.000423212 Jy ! Component: 150 - total flux cleaned = 0.000386137 Jy ! Component: 200 - total flux cleaned = 0.000355797 Jy ! Total flux subtracted in 200 components = 0.000355797 Jy ! Clean residual min=-0.003209 max=0.003154 Jy/beam ! Clean residual mean=-0.000003 rms=0.000772 Jy/beam ! Combined flux in latest and established models = 0.0865597 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 22 components and 0.0865597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097228Jy sigma=0.000600 ! Fit after self-cal, rms=0.097248Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.94937e-06 Jy ! Component: 100 - total flux cleaned = -2.609e-05 Jy ! Component: 150 - total flux cleaned = -5.81851e-05 Jy ! Component: 200 - total flux cleaned = -7.13895e-05 Jy ! Total flux subtracted in 200 components = -7.13895e-05 Jy ! Clean residual min=-0.003193 max=0.003166 Jy/beam ! Clean residual mean=-0.000003 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.0864883 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0864883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097240Jy sigma=0.000600 ! Fit after self-cal, rms=0.097234Jy sigma=0.000600 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097234Jy sigma=0.000600 ! Fit after self-cal, rms=0.097173Jy sigma=0.000600 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.507 mas, bmaj=25.09 mas, bpa=-5.993 degrees ! Estimated noise=2306.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000406542 Jy ! Component: 100 - total flux cleaned = 0.000407582 Jy ! Component: 150 - total flux cleaned = 0.000408246 Jy ! Component: 200 - total flux cleaned = 0.000416924 Jy ! Total flux subtracted in 200 components = 0.000416924 Jy ! Clean residual min=-0.003565 max=0.003501 Jy/beam ! Clean residual mean=-0.000006 rms=0.001168 Jy/beam ! Combined flux in latest and established models = 0.0869052 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 25 components and 0.0869052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097172Jy sigma=0.000600 ! Fit after self-cal, rms=0.097175Jy sigma=0.000600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.14611e-05 Jy ! Component: 100 - total flux cleaned = -1.16626e-05 Jy ! Component: 150 - total flux cleaned = -1.18729e-05 Jy ! Component: 200 - total flux cleaned = -1.08983e-05 Jy ! Total flux subtracted in 200 components = -1.08983e-05 Jy ! Clean residual min=-0.003570 max=0.003507 Jy/beam ! Clean residual mean=-0.000005 rms=0.001173 Jy/beam ! Combined flux in latest and established models = 0.0868943 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 25 components and 0.0868943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097174Jy sigma=0.000600 ! Fit after self-cal, rms=0.097173Jy sigma=0.000600 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.828 mas, bpa=-1.544 degrees ! Estimated noise=1563.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.517 x 6.828 at -1.544 degrees (North through East) ! Clean map min=-0.0028652 max=0.081451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.056 mas, bmaj=5.872 mas, bpa=-1.763 degrees ! Estimated noise=2436.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0628413 Jy ! Component: 100 - total flux cleaned = 0.0774829 Jy ! Component: 150 - total flux cleaned = 0.0816536 Jy ! Component: 200 - total flux cleaned = 0.0832319 Jy ! Total flux subtracted in 200 components = 0.0832319 Jy ! Clean residual min=-0.004237 max=0.004490 Jy/beam ! Clean residual mean=-0.000013 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.0832319 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0832319 Jy ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.828 mas, bpa=-1.544 degrees ! Estimated noise=1563.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273548 Jy ! Component: 100 - total flux cleaned = 0.00292945 Jy ! Component: 150 - total flux cleaned = 0.00303321 Jy ! Component: 200 - total flux cleaned = 0.00307881 Jy ! Total flux subtracted in 200 components = 0.00307881 Jy ! Clean residual min=-0.003147 max=0.003040 Jy/beam ! Clean residual mean=-0.000004 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.0863107 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0863107 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.507 mas, bmaj=25.09 mas, bpa=-5.993 degrees ! Estimated noise=2306.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000549255 Jy ! Component: 100 - total flux cleaned = 0.000549739 Jy ! Component: 150 - total flux cleaned = 0.0005618 Jy ! Component: 200 - total flux cleaned = 0.000562486 Jy ! Total flux subtracted in 200 components = 0.000562486 Jy ! Clean residual min=-0.003585 max=0.003600 Jy/beam ! Clean residual mean=-0.000004 rms=0.001192 Jy/beam ! Combined flux in latest and established models = 0.0868732 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.16779e-05 Jy ! Component: 100 - total flux cleaned = 1.23613e-05 Jy ! Component: 150 - total flux cleaned = 1.2692e-05 Jy ! Component: 200 - total flux cleaned = 2.21668e-05 Jy ! Total flux subtracted in 200 components = 2.21668e-05 Jy ! Clean residual min=-0.003565 max=0.003584 Jy/beam ! Clean residual mean=-0.000004 rms=0.001185 Jy/beam ! Combined flux in latest and established models = 0.0868954 Jy ! Adding 4 model components to the UV plane model. ! The established model now contains 26 components and 0.0868954 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.517 mas, bmaj=6.828 mas, bpa=-1.544 degrees ! Estimated noise=1563.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000379985 Jy ! Component: 100 - total flux cleaned = -0.000347566 Jy ! Component: 150 - total flux cleaned = -0.000319053 Jy ! Component: 200 - total flux cleaned = -0.000294654 Jy ! Total flux subtracted in 200 components = -0.000294654 Jy ! Clean residual min=-0.003091 max=0.003191 Jy/beam ! Clean residual mean=-0.000003 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.0866007 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 30 components and 0.0866007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097186Jy sigma=0.000600 ! Fit after self-cal, rms=0.097180Jy sigma=0.000600 wmodel J0453-3949_S_2017_07_16_pus_map.mod ! Writing 30 model components to file: J0453-3949_S_2017_07_16_pus_map.mod wobs J0453-3949_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0453-3949_S_2017_07_16_pus_uvs.fits wwins J0453-3949_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0453-3949_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011287 Jy ! Component: 100 - total flux cleaned = -0.000217347 Jy ! Component: 150 - total flux cleaned = -3.70269e-05 Jy ! Component: 200 - total flux cleaned = 4.68034e-05 Jy ! Component: 250 - total flux cleaned = -3.43938e-05 Jy ! Component: 300 - total flux cleaned = -0.00018476 Jy ! Component: 350 - total flux cleaned = -0.000466559 Jy ! Component: 400 - total flux cleaned = -0.000635743 Jy ! Component: 450 - total flux cleaned = -0.000960099 Jy ! Component: 500 - total flux cleaned = -0.00139754 Jy ! Component: 550 - total flux cleaned = -0.00179026 Jy ! Component: 600 - total flux cleaned = -0.00219985 Jy ! Component: 650 - total flux cleaned = -0.00256825 Jy ! Component: 700 - total flux cleaned = -0.00297973 Jy ! Component: 750 - total flux cleaned = -0.00324555 Jy ! Component: 800 - total flux cleaned = -0.00353014 Jy ! Component: 850 - total flux cleaned = -0.00383199 Jy ! Component: 900 - total flux cleaned = -0.00407708 Jy ! Component: 950 - total flux cleaned = -0.00438729 Jy ! Component: 1000 - total flux cleaned = -0.00461974 Jy ! Component: 1050 - total flux cleaned = -0.00484656 Jy ! Component: 1100 - total flux cleaned = -0.00506819 Jy ! Component: 1150 - total flux cleaned = -0.00519868 Jy ! Component: 1200 - total flux cleaned = -0.00534882 Jy ! Component: 1250 - total flux cleaned = -0.00549655 Jy ! Component: 1300 - total flux cleaned = -0.00566306 Jy ! Component: 1350 - total flux cleaned = -0.00586852 Jy ! Component: 1400 - total flux cleaned = -0.00599006 Jy ! Component: 1450 - total flux cleaned = -0.0061504 Jy ! Component: 1500 - total flux cleaned = -0.00632836 Jy ! Component: 1550 - total flux cleaned = -0.00640671 Jy ! Component: 1600 - total flux cleaned = -0.00658128 Jy ! Component: 1650 - total flux cleaned = -0.00667769 Jy ! Component: 1700 - total flux cleaned = -0.00681148 Jy ! Component: 1750 - total flux cleaned = -0.00690668 Jy ! Component: 1800 - total flux cleaned = -0.0070392 Jy ! Component: 1850 - total flux cleaned = -0.0071523 Jy ! Component: 1900 - total flux cleaned = -0.00724624 Jy ! Component: 1950 - total flux cleaned = -0.00735875 Jy ! Component: 2000 - total flux cleaned = -0.00747097 Jy ! Component: 2050 - total flux cleaned = -0.0075644 Jy ! Component: 2100 - total flux cleaned = -0.0076203 Jy ! Component: 2150 - total flux cleaned = -0.00771338 Jy ! Component: 2200 - total flux cleaned = -0.00776924 Jy ! Component: 2250 - total flux cleaned = -0.00782519 Jy ! Component: 2300 - total flux cleaned = -0.00788124 Jy ! Component: 2350 - total flux cleaned = -0.00795606 Jy ! Component: 2400 - total flux cleaned = -0.00801236 Jy ! Component: 2450 - total flux cleaned = -0.00806859 Jy ! Component: 2500 - total flux cleaned = -0.00810608 Jy ! Component: 2550 - total flux cleaned = -0.00818152 Jy ! Component: 2600 - total flux cleaned = -0.00821928 Jy ! Component: 2650 - total flux cleaned = -0.00827622 Jy ! Component: 2700 - total flux cleaned = -0.00829523 Jy ! Component: 2750 - total flux cleaned = -0.00833348 Jy ! Component: 2800 - total flux cleaned = -0.00833344 Jy ! Component: 2850 - total flux cleaned = -0.00837196 Jy ! Component: 2900 - total flux cleaned = -0.00841043 Jy ! Component: 2950 - total flux cleaned = -0.00846858 Jy ! Component: 3000 - total flux cleaned = -0.0084489 Jy ! Component: 3050 - total flux cleaned = -0.00848817 Jy ! Component: 3100 - total flux cleaned = -0.00848824 Jy ! Component: 3150 - total flux cleaned = -0.00850807 Jy ! Component: 3200 - total flux cleaned = -0.00850786 Jy ! Component: 3250 - total flux cleaned = -0.00848771 Jy ! Component: 3300 - total flux cleaned = -0.00846728 Jy ! Component: 3350 - total flux cleaned = -0.00850801 Jy ! Component: 3400 - total flux cleaned = -0.00850782 Jy ! Component: 3450 - total flux cleaned = -0.00852865 Jy ! Component: 3500 - total flux cleaned = -0.00852846 Jy ! Component: 3550 - total flux cleaned = -0.00857075 Jy ! Component: 3600 - total flux cleaned = -0.00852789 Jy ! Component: 3650 - total flux cleaned = -0.00854939 Jy ! Component: 3700 - total flux cleaned = -0.00857108 Jy ! Component: 3750 - total flux cleaned = -0.00859299 Jy ! Component: 3800 - total flux cleaned = -0.00861527 Jy ! Component: 3850 - total flux cleaned = -0.00861523 Jy ! Component: 3900 - total flux cleaned = -0.00861492 Jy ! Component: 3950 - total flux cleaned = -0.00863747 Jy ! Component: 4000 - total flux cleaned = -0.0086836 Jy ! Component: 4050 - total flux cleaned = -0.0086837 Jy ! Total flux subtracted in 4096 components = -0.00868388 Jy ! Clean residual min=-0.001354 max=0.001279 Jy/beam ! Clean residual mean=-0.000014 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0779168 Jy keep ! Adding 195 model components to the UV plane model. ! The established model now contains 225 components and 0.0779168 Jy ![Exited script file: muppet] wmap "J0453-3949_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.517 x 6.828 at -1.544 degrees (North through East) ! Clean map min=-0.0029636 max=0.081416 Jy/beam ! Writing clean map to FITS file: J0453-3949_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0814157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329027 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.2124 1.2124 2.42479 4.84959 9.69918 19.3984 38.7967 77.5934 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.517 x 6.828 at -1.544 degrees (North through East) ! Clean map min=-0.0029636 max=0.081416 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0453-3949_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:01:32 2019