! Started logfile: J0449+1754_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:05:11 2019 obs J0449+1754_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0449+1754_S_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.778168 visibilities/baseline/integration-bin. ! Found source: J0449+1754 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 15968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0449+1754_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 404 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.896791Jy sigma=0.007692 ! Fit after self-cal, rms=0.886963Jy sigma=0.007640 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.78 mas, bmaj=8.06 mas, bpa=14.74 degrees ! Estimated noise=895.463 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0915882 Jy ! Component: 100 - total flux cleaned = 0.111616 Jy ! Total flux subtracted in 100 components = 0.111616 Jy ! Clean residual min=-0.003609 max=0.005957 Jy/beam ! Clean residual mean=-0.000017 rms=0.001091 Jy/beam ! Combined flux in latest and established models = 0.111616 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.111616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094417Jy sigma=0.000680 ! Fit after self-cal, rms=0.094415Jy sigma=0.000680 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.453 mas, bmaj=8.692 mas, bpa=14.54 degrees ! Estimated noise=708.949 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637395 Jy ! Component: 100 - total flux cleaned = 0.00900786 Jy ! Component: 150 - total flux cleaned = 0.0101123 Jy ! Component: 200 - total flux cleaned = 0.0104176 Jy ! Total flux subtracted in 200 components = 0.0104176 Jy ! Clean residual min=-0.003328 max=0.004360 Jy/beam ! Clean residual mean=-0.000022 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.122034 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 20 components and 0.122034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094036Jy sigma=0.000676 ! Fit after self-cal, rms=0.094024Jy sigma=0.000676 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.96 HN 0.92 KP 0.96 ! LA 1.00 MK 1.00* NL 0.92 OV 0.98 ! PT 1.02 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 0.97 KP 0.93 ! LA 0.96 MK 1.00* NL 1.20 OV 0.99 ! PT 1.02 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.95 HN 0.94 KP 0.97 ! LA 1.00 MK 1.00* NL 1.26 OV 0.98 ! PT 1.04 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 0.90 KP 1.00* ! LA 0.91 MK 1.00* NL 1.00* OV 0.94 ! PT 1.08 SC 0.85 ! ! ! Fit before self-cal, rms=0.094024Jy sigma=0.000676 ! Fit after self-cal, rms=0.090258Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.42 mas, bmaj=8.63 mas, bpa=13.83 degrees ! Estimated noise=704.146 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000544419 Jy ! Component: 100 - total flux cleaned = 0.000306267 Jy ! Component: 150 - total flux cleaned = 0.000205886 Jy ! Component: 200 - total flux cleaned = 0.000127113 Jy ! Total flux subtracted in 200 components = 0.000127113 Jy ! Clean residual min=-0.003333 max=0.003171 Jy/beam ! Clean residual mean=-0.000015 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 0.122161 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.122161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090209Jy sigma=0.000668 ! Fit after self-cal, rms=0.090266Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090266Jy sigma=0.000668 ! Fit after self-cal, rms=0.090969Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.419 mas, bmaj=8.6 mas, bpa=13.98 degrees ! Estimated noise=706.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000761626 Jy ! Component: 100 - total flux cleaned = 0.000847861 Jy ! Component: 150 - total flux cleaned = 0.000824645 Jy ! Component: 200 - total flux cleaned = 0.000824265 Jy ! Total flux subtracted in 200 components = 0.000824265 Jy ! Clean residual min=-0.001837 max=0.001818 Jy/beam ! Clean residual mean=0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.122985 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 37 components and 0.122985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090960Jy sigma=0.000660 ! Fit after self-cal, rms=0.091062Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124169 Jy ! Component: 100 - total flux cleaned = 0.000103887 Jy ! Component: 150 - total flux cleaned = 7.65045e-05 Jy ! Component: 200 - total flux cleaned = 5.93559e-05 Jy ! Total flux subtracted in 200 components = 5.93559e-05 Jy ! Clean residual min=-0.001848 max=0.001789 Jy/beam ! Clean residual mean=0.000005 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.123045 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 45 components and 0.123045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091059Jy sigma=0.000660 ! Fit after self-cal, rms=0.091059Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091059Jy sigma=0.000660 ! Fit after self-cal, rms=0.091442Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.409 mas, bmaj=8.59 mas, bpa=14.04 degrees ! Estimated noise=706.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000477448 Jy ! Component: 100 - total flux cleaned = 0.000548554 Jy ! Component: 150 - total flux cleaned = 0.000565138 Jy ! Component: 200 - total flux cleaned = 0.0005798 Jy ! Total flux subtracted in 200 components = 0.0005798 Jy ! Clean residual min=-0.001857 max=0.001791 Jy/beam ! Clean residual mean=0.000005 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.123625 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.123625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091438Jy sigma=0.000660 ! Fit after self-cal, rms=0.091447Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25867e-05 Jy ! Component: 100 - total flux cleaned = 1.07601e-05 Jy ! Component: 150 - total flux cleaned = 4.22423e-06 Jy ! Component: 200 - total flux cleaned = -8.37215e-06 Jy ! Total flux subtracted in 200 components = -8.37215e-06 Jy ! Clean residual min=-0.001840 max=0.001782 Jy/beam ! Clean residual mean=0.000004 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.123616 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 53 components and 0.123616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091446Jy sigma=0.000660 ! Fit after self-cal, rms=0.091446Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091446Jy sigma=0.000660 ! Fit after self-cal, rms=0.091522Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.009 mas, bmaj=10.44 mas, bpa=5.617 degrees ! Estimated noise=819.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036743 Jy ! Component: 100 - total flux cleaned = 0.000308973 Jy ! Component: 150 - total flux cleaned = 0.000301905 Jy ! Component: 200 - total flux cleaned = 0.000302085 Jy ! Total flux subtracted in 200 components = 0.000302085 Jy ! Clean residual min=-0.002116 max=0.002110 Jy/beam ! Clean residual mean=0.000007 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.123918 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 58 components and 0.123918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091521Jy sigma=0.000660 ! Fit after self-cal, rms=0.091522Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73247e-05 Jy ! Component: 100 - total flux cleaned = -1.39069e-05 Jy ! Component: 150 - total flux cleaned = -8.19058e-06 Jy ! Component: 200 - total flux cleaned = -7.97806e-06 Jy ! Total flux subtracted in 200 components = -7.97806e-06 Jy ! Clean residual min=-0.002092 max=0.002111 Jy/beam ! Clean residual mean=0.000007 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.12391 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 0.12391 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091522Jy sigma=0.000660 ! Fit after self-cal, rms=0.091523Jy sigma=0.000660 ! Inverting map ! Added new window around map position (-36.5, 54.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00196373 Jy ! Component: 100 - total flux cleaned = 0.00273055 Jy ! Component: 150 - total flux cleaned = 0.00303061 Jy ! Component: 200 - total flux cleaned = 0.00318683 Jy ! Total flux subtracted in 200 components = 0.00318683 Jy ! Clean residual min=-0.001832 max=0.001552 Jy/beam ! Clean residual mean=0.000004 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.127097 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 94 components and 0.127097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091479Jy sigma=0.000660 ! Fit after self-cal, rms=0.091481Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=8.583 mas, bpa=14.06 degrees ! Estimated noise=707 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.402 x 8.583 at 14.06 degrees (North through East) ! Clean map min=-0.0016577 max=0.11649 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=7.969 mas, bpa=14.15 degrees ! Estimated noise=879.509 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0898087 Jy ! Component: 100 - total flux cleaned = 0.109898 Jy ! Component: 150 - total flux cleaned = 0.117187 Jy ! Component: 200 - total flux cleaned = 0.120091 Jy ! Total flux subtracted in 200 components = 0.120091 Jy ! Clean residual min=-0.002144 max=0.002074 Jy/beam ! Clean residual mean=0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.120091 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.120091 Jy ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=8.583 mas, bpa=14.06 degrees ! Estimated noise=707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281591 Jy ! Component: 100 - total flux cleaned = 0.00439245 Jy ! Component: 150 - total flux cleaned = 0.00499123 Jy ! Component: 200 - total flux cleaned = 0.00521406 Jy ! Total flux subtracted in 200 components = 0.00521406 Jy ! Clean residual min=-0.001724 max=0.001574 Jy/beam ! Clean residual mean=0.000003 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.125305 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 45 components and 0.125305 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.009 mas, bmaj=10.44 mas, bpa=5.617 degrees ! Estimated noise=819.805 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010367 Jy ! Component: 100 - total flux cleaned = 0.0016034 Jy ! Component: 150 - total flux cleaned = 0.00179936 Jy ! Component: 200 - total flux cleaned = 0.00199187 Jy ! Total flux subtracted in 200 components = 0.00199187 Jy ! Clean residual min=-0.001828 max=0.001515 Jy/beam ! Clean residual mean=0.000004 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.127296 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121716 Jy ! Component: 100 - total flux cleaned = 0.000153568 Jy ! Component: 150 - total flux cleaned = 0.000169342 Jy ! Component: 200 - total flux cleaned = 0.000184124 Jy ! Total flux subtracted in 200 components = 0.000184124 Jy ! Clean residual min=-0.001809 max=0.001508 Jy/beam ! Clean residual mean=0.000003 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.127481 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 90 components and 0.127481 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=8.583 mas, bpa=14.06 degrees ! Estimated noise=707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000397134 Jy ! Component: 100 - total flux cleaned = -0.000486246 Jy ! Component: 150 - total flux cleaned = -0.000484816 Jy ! Component: 200 - total flux cleaned = -0.000509124 Jy ! Total flux subtracted in 200 components = -0.000509124 Jy ! Clean residual min=-0.001623 max=0.001565 Jy/beam ! Clean residual mean=0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.126972 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 111 components and 0.126972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091460Jy sigma=0.000659 ! Fit after self-cal, rms=0.091461Jy sigma=0.000659 wmodel J0449+1754_S_2017_01_16_pus_map.mod ! Writing 111 model components to file: J0449+1754_S_2017_01_16_pus_map.mod wobs J0449+1754_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0449+1754_S_2017_01_16_pus_uvs.fits wwins J0449+1754_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0449+1754_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.39547e-05 Jy ! Component: 100 - total flux cleaned = 9.42635e-05 Jy ! Component: 150 - total flux cleaned = 9.4719e-05 Jy ! Component: 200 - total flux cleaned = 7.15632e-05 Jy ! Component: 250 - total flux cleaned = -1.92006e-05 Jy ! Component: 300 - total flux cleaned = -8.48083e-05 Jy ! Component: 350 - total flux cleaned = -0.000170259 Jy ! Component: 400 - total flux cleaned = -0.000273769 Jy ! Component: 450 - total flux cleaned = -0.000314043 Jy ! Component: 500 - total flux cleaned = -0.000393364 Jy ! Component: 550 - total flux cleaned = -0.000489902 Jy ! Component: 600 - total flux cleaned = -0.000546914 Jy ! Component: 650 - total flux cleaned = -0.000584146 Jy ! Component: 700 - total flux cleaned = -0.000620795 Jy ! Component: 750 - total flux cleaned = -0.000674656 Jy ! Component: 800 - total flux cleaned = -0.000727518 Jy ! Component: 850 - total flux cleaned = -0.000762388 Jy ! Component: 900 - total flux cleaned = -0.000762148 Jy ! Component: 950 - total flux cleaned = -0.000796053 Jy ! Component: 1000 - total flux cleaned = -0.000846142 Jy ! Component: 1050 - total flux cleaned = -0.000829389 Jy ! Component: 1100 - total flux cleaned = -0.000862064 Jy ! Component: 1150 - total flux cleaned = -0.000861978 Jy ! Component: 1200 - total flux cleaned = -0.000830069 Jy ! Component: 1250 - total flux cleaned = -0.000877504 Jy ! Component: 1300 - total flux cleaned = -0.000862054 Jy ! Component: 1350 - total flux cleaned = -0.000862302 Jy ! Component: 1400 - total flux cleaned = -0.000847032 Jy ! Component: 1450 - total flux cleaned = -0.000846962 Jy ! Component: 1500 - total flux cleaned = -0.000802094 Jy ! Component: 1550 - total flux cleaned = -0.000816962 Jy ! Component: 1600 - total flux cleaned = -0.000787815 Jy ! Component: 1650 - total flux cleaned = -0.000816852 Jy ! Component: 1700 - total flux cleaned = -0.000816896 Jy ! Component: 1750 - total flux cleaned = -0.000802571 Jy ! Component: 1800 - total flux cleaned = -0.000830426 Jy ! Component: 1850 - total flux cleaned = -0.000816441 Jy ! Component: 1900 - total flux cleaned = -0.00081642 Jy ! Component: 1950 - total flux cleaned = -0.000816365 Jy ! Component: 2000 - total flux cleaned = -0.000843443 Jy ! Component: 2050 - total flux cleaned = -0.000856993 Jy ! Component: 2100 - total flux cleaned = -0.000856824 Jy ! Component: 2150 - total flux cleaned = -0.000857001 Jy ! Component: 2200 - total flux cleaned = -0.000870151 Jy ! Component: 2250 - total flux cleaned = -0.000883102 Jy ! Component: 2300 - total flux cleaned = -0.000857439 Jy ! Component: 2350 - total flux cleaned = -0.000895589 Jy ! Component: 2400 - total flux cleaned = -0.000883011 Jy ! Component: 2450 - total flux cleaned = -0.000895445 Jy ! Component: 2500 - total flux cleaned = -0.000920261 Jy ! Component: 2550 - total flux cleaned = -0.000883354 Jy ! Component: 2600 - total flux cleaned = -0.000920088 Jy ! Component: 2650 - total flux cleaned = -0.000871626 Jy ! Component: 2700 - total flux cleaned = -0.000931491 Jy ! Component: 2750 - total flux cleaned = -0.000883831 Jy ! Component: 2800 - total flux cleaned = -0.000907459 Jy ! Component: 2850 - total flux cleaned = -0.000883984 Jy ! Component: 2900 - total flux cleaned = -0.000837495 Jy ! Component: 2950 - total flux cleaned = -0.000872246 Jy ! Component: 3000 - total flux cleaned = -0.00083791 Jy ! Component: 3050 - total flux cleaned = -0.000815224 Jy ! Component: 3100 - total flux cleaned = -0.000860187 Jy ! Component: 3150 - total flux cleaned = -0.00083766 Jy ! Component: 3200 - total flux cleaned = -0.000826501 Jy ! Component: 3250 - total flux cleaned = -0.00080444 Jy ! Component: 3300 - total flux cleaned = -0.00080449 Jy ! Component: 3350 - total flux cleaned = -0.000826248 Jy ! Component: 3400 - total flux cleaned = -0.000782972 Jy ! Component: 3450 - total flux cleaned = -0.000782996 Jy ! Component: 3500 - total flux cleaned = -0.000750898 Jy ! Component: 3550 - total flux cleaned = -0.000772145 Jy ! Component: 3600 - total flux cleaned = -0.000793228 Jy ! Component: 3650 - total flux cleaned = -0.0007722 Jy ! Component: 3700 - total flux cleaned = -0.00075149 Jy ! Component: 3750 - total flux cleaned = -0.000741195 Jy ! Component: 3800 - total flux cleaned = -0.000741258 Jy ! Component: 3850 - total flux cleaned = -0.000731143 Jy ! Component: 3900 - total flux cleaned = -0.000700693 Jy ! Component: 3950 - total flux cleaned = -0.000761441 Jy ! Component: 4000 - total flux cleaned = -0.000711032 Jy ! Component: 4050 - total flux cleaned = -0.000650914 Jy ! Total flux subtracted in 4096 components = -0.000690686 Jy ! Clean residual min=-0.000638 max=0.000555 Jy/beam ! Clean residual mean=0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.126281 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 407 components and 0.126281 Jy ![Exited script file: muppet] wmap "J0449+1754_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.402 x 8.583 at 14.06 degrees (North through East) ! Clean map min=-0.0011387 max=0.11608 Jy/beam ! Writing clean map to FITS file: J0449+1754_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.116083 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192683 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.497964 0.497964 0.995927 1.99185 3.98371 7.96742 15.9348 31.8697 63.7393 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.402 x 8.583 at 14.06 degrees (North through East) ! Clean map min=-0.0011387 max=0.11608 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0449+1754_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:05:16 2019