! Started logfile: J0449+1121_S_2017_01_21_pus_uvs.log on Sun May 5 15:46:32 2019 obs J0449+1121_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0449+1121_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.854167 visibilities/baseline/integration-bin. ! Found source: J0449+1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0449+1121_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.615843Jy sigma=0.005396 ! Fit after self-cal, rms=0.613609Jy sigma=0.005374 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.621 mas, bmaj=7.524 mas, bpa=-3.844 degrees ! Estimated noise=3082.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.313819 Jy ! Component: 100 - total flux cleaned = 0.437346 Jy ! Total flux subtracted in 100 components = 0.437346 Jy ! Clean residual min=-0.022773 max=0.055813 Jy/beam ! Clean residual mean=0.000224 rms=0.010289 Jy/beam ! Combined flux in latest and established models = 0.437346 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.437346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127155Jy sigma=0.001171 ! Fit after self-cal, rms=0.126944Jy sigma=0.001169 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.981 mas, bmaj=7.671 mas, bpa=-1.555 degrees ! Estimated noise=2766.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070941 Jy ! Component: 100 - total flux cleaned = 0.10445 Jy ! Component: 150 - total flux cleaned = 0.121738 Jy ! Component: 200 - total flux cleaned = 0.132552 Jy ! Total flux subtracted in 200 components = 0.132552 Jy ! Clean residual min=-0.016634 max=0.015767 Jy/beam ! Clean residual mean=0.000084 rms=0.004484 Jy/beam ! Combined flux in latest and established models = 0.569897 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 41 components and 0.569897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088723Jy sigma=0.000758 ! Fit after self-cal, rms=0.088669Jy sigma=0.000757 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 0.87 HN 0.99 LA 1.02 ! MK 1.13 NL 1.02 OV 1.02 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.86 HN 1.04 LA 0.99 ! MK 0.99 NL 1.01 OV 1.07 PT 0.97 ! SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.93 HN 0.99 LA 1.02 ! MK 1.03 NL 1.03 OV 0.97 PT 0.95 ! SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.03 LA 0.99 ! MK 1.00* NL 1.00* OV 0.97 PT 0.97 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.088669Jy sigma=0.000757 ! Fit after self-cal, rms=0.084008Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=7.777 mas, bpa=-1.41 degrees ! Estimated noise=2766.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0026132 Jy ! Component: 100 - total flux cleaned = -0.00261334 Jy ! Component: 150 - total flux cleaned = -0.00251959 Jy ! Component: 200 - total flux cleaned = -0.00234813 Jy ! Total flux subtracted in 200 components = -0.00234813 Jy ! Clean residual min=-0.007516 max=0.007591 Jy/beam ! Clean residual mean=0.000027 rms=0.002061 Jy/beam ! Combined flux in latest and established models = 0.567549 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.567549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083714Jy sigma=0.000684 ! Fit after self-cal, rms=0.083820Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083820Jy sigma=0.000684 ! Fit after self-cal, rms=0.084004Jy sigma=0.000684 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.023 mas, bmaj=7.786 mas, bpa=-1.341 degrees ! Estimated noise=2767.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146883 Jy ! Component: 100 - total flux cleaned = -0.00138895 Jy ! Component: 150 - total flux cleaned = -0.00124028 Jy ! Component: 200 - total flux cleaned = -0.00110103 Jy ! Total flux subtracted in 200 components = -0.00110103 Jy ! Clean residual min=-0.007327 max=0.007702 Jy/beam ! Clean residual mean=0.000025 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 0.566448 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 50 components and 0.566448 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083832Jy sigma=0.000683 ! Fit after self-cal, rms=0.083839Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000129729 Jy ! Component: 100 - total flux cleaned = 0.000260905 Jy ! Component: 150 - total flux cleaned = 0.000383232 Jy ! Component: 200 - total flux cleaned = 0.000503185 Jy ! Total flux subtracted in 200 components = 0.000503185 Jy ! Clean residual min=-0.007247 max=0.007648 Jy/beam ! Clean residual mean=0.000024 rms=0.002004 Jy/beam ! Combined flux in latest and established models = 0.566951 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 54 components and 0.566951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083738Jy sigma=0.000682 ! Fit after self-cal, rms=0.083741Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083741Jy sigma=0.000682 ! Fit after self-cal, rms=0.083831Jy sigma=0.000682 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.028 mas, bmaj=7.789 mas, bpa=-1.272 degrees ! Estimated noise=2768.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000694151 Jy ! Component: 100 - total flux cleaned = -0.000638376 Jy ! Component: 150 - total flux cleaned = -0.000530353 Jy ! Component: 200 - total flux cleaned = -0.000371966 Jy ! Total flux subtracted in 200 components = -0.000371966 Jy ! Clean residual min=-0.007082 max=0.007647 Jy/beam ! Clean residual mean=0.000023 rms=0.001986 Jy/beam ! Combined flux in latest and established models = 0.566579 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 0.566579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083747Jy sigma=0.000682 ! Fit after self-cal, rms=0.083747Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.30427e-05 Jy ! Component: 100 - total flux cleaned = 0.000165144 Jy ! Component: 150 - total flux cleaned = 0.000261124 Jy ! Component: 200 - total flux cleaned = 0.000309972 Jy ! Total flux subtracted in 200 components = 0.000309972 Jy ! Clean residual min=-0.007007 max=0.007591 Jy/beam ! Clean residual mean=0.000023 rms=0.001972 Jy/beam ! Combined flux in latest and established models = 0.566889 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 61 components and 0.566889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083687Jy sigma=0.000681 ! Fit after self-cal, rms=0.083686Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083686Jy sigma=0.000681 ! Fit after self-cal, rms=0.083722Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.256 mas, bmaj=11.5 mas, bpa=4.521 degrees ! Estimated noise=3431.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236128 Jy ! Component: 100 - total flux cleaned = 0.00296203 Jy ! Component: 150 - total flux cleaned = 0.00312272 Jy ! Component: 200 - total flux cleaned = 0.00326773 Jy ! Total flux subtracted in 200 components = 0.00326773 Jy ! Clean residual min=-0.007979 max=0.008693 Jy/beam ! Clean residual mean=0.000036 rms=0.002313 Jy/beam ! Combined flux in latest and established models = 0.570157 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 65 components and 0.570157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083738Jy sigma=0.000681 ! Fit after self-cal, rms=0.083724Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000175199 Jy ! Component: 100 - total flux cleaned = 0.000176603 Jy ! Component: 150 - total flux cleaned = 0.000178866 Jy ! Component: 200 - total flux cleaned = 0.000209622 Jy ! Total flux subtracted in 200 components = 0.000209622 Jy ! Clean residual min=-0.007949 max=0.008651 Jy/beam ! Clean residual mean=0.000035 rms=0.002295 Jy/beam ! Combined flux in latest and established models = 0.570367 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 66 components and 0.570367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083740Jy sigma=0.000681 ! Fit after self-cal, rms=0.083726Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.79 mas, bpa=-1.201 degrees ! Estimated noise=2769.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.79 at -1.201 degrees (North through East) ! Clean map min=-0.0063564 max=0.40252 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.668 mas, bmaj=7.61 mas, bpa=-3.491 degrees ! Estimated noise=3101.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.31343 Jy ! Component: 100 - total flux cleaned = 0.433869 Jy ! Component: 150 - total flux cleaned = 0.492092 Jy ! Component: 200 - total flux cleaned = 0.521774 Jy ! Total flux subtracted in 200 components = 0.521774 Jy ! Clean residual min=-0.009610 max=0.016117 Jy/beam ! Clean residual mean=0.000083 rms=0.003476 Jy/beam ! Combined flux in latest and established models = 0.521774 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.521774 Jy ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.79 mas, bpa=-1.201 degrees ! Estimated noise=2769.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0209934 Jy ! Component: 100 - total flux cleaned = 0.0318712 Jy ! Component: 150 - total flux cleaned = 0.0389592 Jy ! Component: 200 - total flux cleaned = 0.0439431 Jy ! Total flux subtracted in 200 components = 0.0439431 Jy ! Clean residual min=-0.007235 max=0.007485 Jy/beam ! Clean residual mean=0.000024 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.565717 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 34 components and 0.565717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.256 mas, bmaj=11.5 mas, bpa=4.521 degrees ! Estimated noise=3431.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452463 Jy ! Component: 100 - total flux cleaned = 0.0068933 Jy ! Component: 150 - total flux cleaned = 0.00772518 Jy ! Component: 200 - total flux cleaned = 0.00783207 Jy ! Total flux subtracted in 200 components = 0.00783207 Jy ! Clean residual min=-0.007957 max=0.008409 Jy/beam ! Clean residual mean=0.000020 rms=0.002145 Jy/beam ! Combined flux in latest and established models = 0.573549 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145606 Jy ! Component: 100 - total flux cleaned = 0.000192001 Jy ! Component: 150 - total flux cleaned = 0.000322373 Jy ! Component: 200 - total flux cleaned = 0.000363429 Jy ! Total flux subtracted in 200 components = 0.000363429 Jy ! Clean residual min=-0.007908 max=0.008292 Jy/beam ! Clean residual mean=0.000018 rms=0.002119 Jy/beam ! Combined flux in latest and established models = 0.573912 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.573912 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.03 mas, bmaj=7.79 mas, bpa=-1.201 degrees ! Estimated noise=2769.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187083 Jy ! Component: 100 - total flux cleaned = 0.000480473 Jy ! Component: 150 - total flux cleaned = 0.000656211 Jy ! Component: 200 - total flux cleaned = 0.000735125 Jy ! Total flux subtracted in 200 components = 0.000735125 Jy ! Clean residual min=-0.006536 max=0.007213 Jy/beam ! Clean residual mean=0.000006 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 0.574647 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.574647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083209Jy sigma=0.000677 ! Fit after self-cal, rms=0.083180Jy sigma=0.000677 wmodel J0449+1121_S_2017_01_21_pus_map.mod ! Writing 67 model components to file: J0449+1121_S_2017_01_21_pus_map.mod wobs J0449+1121_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0449+1121_S_2017_01_21_pus_uvs.fits wwins J0449+1121_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J0449+1121_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145065 Jy ! Component: 100 - total flux cleaned = 0.00236128 Jy ! Component: 150 - total flux cleaned = 0.00278499 Jy ! Component: 200 - total flux cleaned = 0.00328123 Jy ! Component: 250 - total flux cleaned = 0.00356449 Jy ! Component: 300 - total flux cleaned = 0.0034747 Jy ! Component: 350 - total flux cleaned = 0.00347585 Jy ! Component: 400 - total flux cleaned = 0.00372753 Jy ! Component: 450 - total flux cleaned = 0.00388738 Jy ! Component: 500 - total flux cleaned = 0.00396186 Jy ! Component: 550 - total flux cleaned = 0.00396333 Jy ! Component: 600 - total flux cleaned = 0.00447354 Jy ! Component: 650 - total flux cleaned = 0.00461208 Jy ! Component: 700 - total flux cleaned = 0.0046792 Jy ! Component: 750 - total flux cleaned = 0.00441311 Jy ! Component: 800 - total flux cleaned = 0.00441361 Jy ! Component: 850 - total flux cleaned = 0.00428425 Jy ! Component: 900 - total flux cleaned = 0.00403709 Jy ! Component: 950 - total flux cleaned = 0.00391669 Jy ! Component: 1000 - total flux cleaned = 0.00373906 Jy ! Component: 1050 - total flux cleaned = 0.00350689 Jy ! Component: 1100 - total flux cleaned = 0.00322391 Jy ! Component: 1150 - total flux cleaned = 0.0031659 Jy ! Component: 1200 - total flux cleaned = 0.00284051 Jy ! Component: 1250 - total flux cleaned = 0.00257495 Jy ! Component: 1300 - total flux cleaned = 0.00221145 Jy ! Component: 1350 - total flux cleaned = 0.00205759 Jy ! Component: 1400 - total flux cleaned = 0.00180634 Jy ! Component: 1450 - total flux cleaned = 0.00160865 Jy ! Component: 1500 - total flux cleaned = 0.00141515 Jy ! Component: 1550 - total flux cleaned = 0.00122472 Jy ! Component: 1600 - total flux cleaned = 0.00103733 Jy ! Component: 1650 - total flux cleaned = 0.000899288 Jy ! Component: 1700 - total flux cleaned = 0.000763385 Jy ! Component: 1750 - total flux cleaned = 0.000584191 Jy ! Component: 1800 - total flux cleaned = 0.000319385 Jy ! Component: 1850 - total flux cleaned = 0.000232628 Jy ! Component: 1900 - total flux cleaned = 0.000146023 Jy ! Component: 1950 - total flux cleaned = -6.69921e-05 Jy ! Component: 2000 - total flux cleaned = -0.000319337 Jy ! Component: 2050 - total flux cleaned = -0.000485385 Jy ! Component: 2100 - total flux cleaned = -0.000650296 Jy ! Component: 2150 - total flux cleaned = -0.00085444 Jy ! Component: 2200 - total flux cleaned = -0.00109727 Jy ! Component: 2250 - total flux cleaned = -0.00121761 Jy ! Component: 2300 - total flux cleaned = -0.00141671 Jy ! Component: 2350 - total flux cleaned = -0.00157484 Jy ! Component: 2400 - total flux cleaned = -0.00169281 Jy ! Component: 2450 - total flux cleaned = -0.0017706 Jy ! Component: 2500 - total flux cleaned = -0.00192539 Jy ! Component: 2550 - total flux cleaned = -0.00204051 Jy ! Component: 2600 - total flux cleaned = -0.00215509 Jy ! Component: 2650 - total flux cleaned = -0.0022312 Jy ! Component: 2700 - total flux cleaned = -0.00234458 Jy ! Component: 2750 - total flux cleaned = -0.00249415 Jy ! Component: 2800 - total flux cleaned = -0.00253111 Jy ! Component: 2850 - total flux cleaned = -0.00256793 Jy ! Component: 2900 - total flux cleaned = -0.0026781 Jy ! Component: 2950 - total flux cleaned = -0.00278796 Jy ! Component: 3000 - total flux cleaned = -0.00282456 Jy ! Component: 3050 - total flux cleaned = -0.00289725 Jy ! Component: 3100 - total flux cleaned = -0.00304224 Jy ! Component: 3150 - total flux cleaned = -0.00322335 Jy ! Component: 3200 - total flux cleaned = -0.00325959 Jy ! Component: 3250 - total flux cleaned = -0.00336829 Jy ! Component: 3300 - total flux cleaned = -0.00344057 Jy ! Component: 3350 - total flux cleaned = -0.00354943 Jy ! Component: 3400 - total flux cleaned = -0.00362177 Jy ! Component: 3450 - total flux cleaned = -0.00376702 Jy ! Component: 3500 - total flux cleaned = -0.00383974 Jy ! Component: 3550 - total flux cleaned = -0.00387635 Jy ! Component: 3600 - total flux cleaned = -0.00394953 Jy ! Component: 3650 - total flux cleaned = -0.004023 Jy ! Component: 3700 - total flux cleaned = -0.00402297 Jy ! Component: 3750 - total flux cleaned = -0.00406015 Jy ! Component: 3800 - total flux cleaned = -0.00409732 Jy ! Component: 3850 - total flux cleaned = -0.00405985 Jy ! Component: 3900 - total flux cleaned = -0.0040975 Jy ! Component: 3950 - total flux cleaned = -0.00405947 Jy ! Component: 4000 - total flux cleaned = -0.00402139 Jy ! Component: 4050 - total flux cleaned = -0.00394402 Jy ! Total flux subtracted in 4096 components = -0.00390483 Jy ! Clean residual min=-0.002500 max=0.002183 Jy/beam ! Clean residual mean=-0.000015 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.570743 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 316 components and 0.570742 Jy ![Exited script file: muppet] wmap "J0449+1121_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.79 at -1.201 degrees (North through East) ! Clean map min=-0.0044173 max=0.40407 Jy/beam ! Writing clean map to FITS file: J0449+1121_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.404074 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000597509 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.443614 0.443614 0.887228 1.77446 3.54891 7.09782 14.1956 28.3913 56.7826 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.404 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.03 x 7.79 at -1.201 degrees (North through East) ! Clean map min=-0.0044173 max=0.40407 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0449+1121_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:46:36 2019