! Started logfile: J0449+1121_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:05:05 2019 obs J0449+1121_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0449+1121_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.572222 visibilities/baseline/integration-bin. ! Found source: J0449+1121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1648 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0449+1121_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 68 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.670598Jy sigma=0.004468 ! Fit after self-cal, rms=0.670240Jy sigma=0.004446 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=11.8 mas, bpa=24.32 degrees ! Estimated noise=2921.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339003 Jy ! Component: 100 - total flux cleaned = 0.457781 Jy ! Total flux subtracted in 100 components = 0.457781 Jy ! Clean residual min=-0.023891 max=0.051106 Jy/beam ! Clean residual mean=0.000143 rms=0.009123 Jy/beam ! Combined flux in latest and established models = 0.457781 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.457781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419289Jy sigma=0.001015 ! Fit after self-cal, rms=0.418993Jy sigma=0.001014 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.837 mas, bmaj=12.15 mas, bpa=24.41 degrees ! Estimated noise=2454.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518936 Jy ! Component: 100 - total flux cleaned = 0.0726506 Jy ! Component: 150 - total flux cleaned = 0.0843751 Jy ! Component: 200 - total flux cleaned = 0.0918228 Jy ! Total flux subtracted in 200 components = 0.0918228 Jy ! Clean residual min=-0.014755 max=0.023447 Jy/beam ! Clean residual mean=0.000058 rms=0.005495 Jy/beam ! Combined flux in latest and established models = 0.549604 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 42 components and 0.549604 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405840Jy sigma=0.000869 ! Fit after self-cal, rms=0.405683Jy sigma=0.000869 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.90 HN 1.00* KP 0.97 ! LA 1.00 MK 1.00* NL 0.92 OV 0.99 ! PT 1.12 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.00* KP 0.94 ! LA 0.98 MK 1.00* NL 0.99 OV 1.01 ! PT 1.12 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.97 HN 1.00* KP 0.97 ! LA 1.00 MK 1.00* NL 1.05 OV 0.91 ! PT 1.15 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.02 HN 1.00* KP 1.00* ! LA 0.93 MK 1.00* NL 1.00* OV 0.80 ! PT 1.13 SC 1.34 ! ! ! Fit before self-cal, rms=0.405683Jy sigma=0.000869 ! Fit after self-cal, rms=0.394306Jy sigma=0.000804 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.842 mas, bmaj=12.16 mas, bpa=24.18 degrees ! Estimated noise=2447.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00521286 Jy ! Component: 100 - total flux cleaned = 0.00640281 Jy ! Component: 150 - total flux cleaned = 0.0064675 Jy ! Component: 200 - total flux cleaned = 0.00662549 Jy ! Total flux subtracted in 200 components = 0.00662549 Jy ! Clean residual min=-0.013366 max=0.016727 Jy/beam ! Clean residual mean=0.000131 rms=0.004274 Jy/beam ! Combined flux in latest and established models = 0.556229 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.556229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393608Jy sigma=0.000803 ! Fit after self-cal, rms=0.393639Jy sigma=0.000803 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393639Jy sigma=0.000803 ! Fit after self-cal, rms=0.244986Jy sigma=0.000730 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=12.14 mas, bpa=24.18 degrees ! Estimated noise=2467.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613504 Jy ! Component: 100 - total flux cleaned = 0.00935311 Jy ! Component: 150 - total flux cleaned = 0.01057 Jy ! Component: 200 - total flux cleaned = 0.0109235 Jy ! Total flux subtracted in 200 components = 0.0109235 Jy ! Clean residual min=-0.010200 max=0.009278 Jy/beam ! Clean residual mean=0.000051 rms=0.002526 Jy/beam ! Combined flux in latest and established models = 0.567153 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 69 components and 0.567153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244293Jy sigma=0.000729 ! Fit after self-cal, rms=0.243855Jy sigma=0.000729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248944 Jy ! Component: 100 - total flux cleaned = 0.000459372 Jy ! Component: 150 - total flux cleaned = 0.000598968 Jy ! Component: 200 - total flux cleaned = 0.000801747 Jy ! Total flux subtracted in 200 components = 0.000801747 Jy ! Clean residual min=-0.009958 max=0.009240 Jy/beam ! Clean residual mean=0.000051 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.567955 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 77 components and 0.567955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243798Jy sigma=0.000729 ! Fit after self-cal, rms=0.243804Jy sigma=0.000729 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243804Jy sigma=0.000729 ! Fit after self-cal, rms=0.136485Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=12.18 mas, bpa=24.17 degrees ! Estimated noise=2464.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00146182 Jy ! Component: 100 - total flux cleaned = -0.0014599 Jy ! Component: 150 - total flux cleaned = -0.00150797 Jy ! Component: 200 - total flux cleaned = -0.00168637 Jy ! Total flux subtracted in 200 components = -0.00168637 Jy ! Clean residual min=-0.006024 max=0.006700 Jy/beam ! Clean residual mean=0.000009 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.566268 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.566268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136403Jy sigma=0.000673 ! Fit after self-cal, rms=0.135296Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000246568 Jy ! Component: 100 - total flux cleaned = -0.00024713 Jy ! Component: 150 - total flux cleaned = -0.000247518 Jy ! Component: 200 - total flux cleaned = -0.000247175 Jy ! Total flux subtracted in 200 components = -0.000247175 Jy ! Clean residual min=-0.005972 max=0.006714 Jy/beam ! Clean residual mean=0.000010 rms=0.001576 Jy/beam ! Combined flux in latest and established models = 0.566021 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 97 components and 0.566021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135268Jy sigma=0.000673 ! Fit after self-cal, rms=0.135272Jy sigma=0.000673 ! Inverting map ! Added new window around map position (-54, 66.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453929 Jy ! Component: 100 - total flux cleaned = 0.00570671 Jy ! Component: 150 - total flux cleaned = 0.00643843 Jy ! Component: 200 - total flux cleaned = 0.00686529 Jy ! Total flux subtracted in 200 components = 0.00686529 Jy ! Clean residual min=-0.006067 max=0.005418 Jy/beam ! Clean residual mean=-0.000000 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.572886 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 124 components and 0.572887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134766Jy sigma=0.000671 ! Fit after self-cal, rms=0.134660Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134660Jy sigma=0.000671 ! Fit after self-cal, rms=0.133752Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.808 mas, bmaj=12.64 mas, bpa=23.05 degrees ! Estimated noise=2888.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018804 Jy ! Component: 100 - total flux cleaned = 0.00269341 Jy ! Component: 150 - total flux cleaned = 0.0032318 Jy ! Component: 200 - total flux cleaned = 0.00350157 Jy ! Total flux subtracted in 200 components = 0.00350157 Jy ! Clean residual min=-0.005529 max=0.005783 Jy/beam ! Clean residual mean=-0.000003 rms=0.001599 Jy/beam ! Combined flux in latest and established models = 0.576388 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 158 components and 0.576388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133612Jy sigma=0.000670 ! Fit after self-cal, rms=0.133608Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000638005 Jy ! Component: 100 - total flux cleaned = 0.000754996 Jy ! Component: 150 - total flux cleaned = 0.000807707 Jy ! Component: 200 - total flux cleaned = 0.000946879 Jy ! Total flux subtracted in 200 components = 0.000946879 Jy ! Clean residual min=-0.005407 max=0.005670 Jy/beam ! Clean residual mean=-0.000004 rms=0.001580 Jy/beam ! Combined flux in latest and established models = 0.577335 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 181 components and 0.577335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133567Jy sigma=0.000670 ! Fit after self-cal, rms=0.133569Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=12.19 mas, bpa=24.13 degrees ! Estimated noise=2461.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.816 x 12.19 at 24.13 degrees (North through East) ! Clean map min=-0.0055076 max=0.44415 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=11.91 mas, bpa=24.07 degrees ! Estimated noise=2876.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333623 Jy ! Component: 100 - total flux cleaned = 0.450497 Jy ! Component: 150 - total flux cleaned = 0.50313 Jy ! Component: 200 - total flux cleaned = 0.526954 Jy ! Total flux subtracted in 200 components = 0.526954 Jy ! Clean residual min=-0.008980 max=0.010327 Jy/beam ! Clean residual mean=0.000027 rms=0.002616 Jy/beam ! Combined flux in latest and established models = 0.526954 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.526954 Jy ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=12.19 mas, bpa=24.13 degrees ! Estimated noise=2461.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146589 Jy ! Component: 100 - total flux cleaned = 0.0238591 Jy ! Component: 150 - total flux cleaned = 0.0304778 Jy ! Component: 200 - total flux cleaned = 0.03478 Jy ! Total flux subtracted in 200 components = 0.03478 Jy ! Clean residual min=-0.006177 max=0.005971 Jy/beam ! Clean residual mean=0.000012 rms=0.001612 Jy/beam ! Combined flux in latest and established models = 0.561734 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 66 components and 0.561734 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.808 mas, bmaj=12.64 mas, bpa=23.05 degrees ! Estimated noise=2888.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549466 Jy ! Component: 100 - total flux cleaned = 0.0090011 Jy ! Component: 150 - total flux cleaned = 0.010584 Jy ! Component: 200 - total flux cleaned = 0.0117466 Jy ! Total flux subtracted in 200 components = 0.0117466 Jy ! Clean residual min=-0.005533 max=0.005793 Jy/beam ! Clean residual mean=0.000001 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.573481 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102403 Jy ! Component: 100 - total flux cleaned = 0.00168953 Jy ! Component: 150 - total flux cleaned = 0.00213844 Jy ! Component: 200 - total flux cleaned = 0.00254622 Jy ! Total flux subtracted in 200 components = 0.00254622 Jy ! Clean residual min=-0.005378 max=0.005700 Jy/beam ! Clean residual mean=-0.000003 rms=0.001643 Jy/beam ! Combined flux in latest and established models = 0.576027 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 127 components and 0.576027 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.816 mas, bmaj=12.19 mas, bpa=24.13 degrees ! Estimated noise=2461.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00049742 Jy ! Component: 100 - total flux cleaned = -0.000723087 Jy ! Component: 150 - total flux cleaned = -0.000722998 Jy ! Component: 200 - total flux cleaned = -0.00066082 Jy ! Total flux subtracted in 200 components = -0.00066082 Jy ! Clean residual min=-0.005336 max=0.004990 Jy/beam ! Clean residual mean=-0.000001 rms=0.001377 Jy/beam ! Combined flux in latest and established models = 0.575366 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 150 components and 0.575366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133574Jy sigma=0.000669 ! Fit after self-cal, rms=0.133548Jy sigma=0.000669 wmodel J0449+1121_S_2017_01_16_pus_map.mod ! Writing 150 model components to file: J0449+1121_S_2017_01_16_pus_map.mod wobs J0449+1121_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0449+1121_S_2017_01_16_pus_uvs.fits wwins J0449+1121_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0449+1121_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.26542e-05 Jy ! Component: 100 - total flux cleaned = 0.000300554 Jy ! Component: 150 - total flux cleaned = 0.000382781 Jy ! Component: 200 - total flux cleaned = -3.31086e-06 Jy ! Component: 250 - total flux cleaned = -0.000150428 Jy ! Component: 300 - total flux cleaned = -0.000293324 Jy ! Component: 350 - total flux cleaned = -0.000500345 Jy ! Component: 400 - total flux cleaned = -0.000499027 Jy ! Component: 450 - total flux cleaned = -0.000628451 Jy ! Component: 500 - total flux cleaned = -0.000816522 Jy ! Component: 550 - total flux cleaned = -0.000938757 Jy ! Component: 600 - total flux cleaned = -0.00105914 Jy ! Component: 650 - total flux cleaned = -0.00111779 Jy ! Component: 700 - total flux cleaned = -0.00117571 Jy ! Component: 750 - total flux cleaned = -0.00100736 Jy ! Component: 800 - total flux cleaned = -0.000842549 Jy ! Component: 850 - total flux cleaned = -0.000571893 Jy ! Component: 900 - total flux cleaned = -0.000359931 Jy ! Component: 950 - total flux cleaned = -0.000255977 Jy ! Component: 1000 - total flux cleaned = -0.000101402 Jy ! Component: 1050 - total flux cleaned = -5.12943e-05 Jy ! Component: 1100 - total flux cleaned = 4.78971e-05 Jy ! Component: 1150 - total flux cleaned = -5.09418e-05 Jy ! Component: 1200 - total flux cleaned = -0.000147873 Jy ! Component: 1250 - total flux cleaned = -0.000195489 Jy ! Component: 1300 - total flux cleaned = -0.000289757 Jy ! Component: 1350 - total flux cleaned = -0.000475532 Jy ! Component: 1400 - total flux cleaned = -0.000520712 Jy ! Component: 1450 - total flux cleaned = -0.000475867 Jy ! Component: 1500 - total flux cleaned = -0.000788714 Jy ! Component: 1550 - total flux cleaned = -0.00078868 Jy ! Component: 1600 - total flux cleaned = -0.000876211 Jy ! Component: 1650 - total flux cleaned = -0.000876362 Jy ! Component: 1700 - total flux cleaned = -0.00083358 Jy ! Component: 1750 - total flux cleaned = -0.000832922 Jy ! Component: 1800 - total flux cleaned = -0.000707768 Jy ! Component: 1850 - total flux cleaned = -0.000749 Jy ! Component: 1900 - total flux cleaned = -0.00079002 Jy ! Component: 1950 - total flux cleaned = -0.000708816 Jy ! Component: 2000 - total flux cleaned = -0.000709224 Jy ! Component: 2050 - total flux cleaned = -0.000590051 Jy ! Component: 2100 - total flux cleaned = -0.000669614 Jy ! Component: 2150 - total flux cleaned = -0.000669471 Jy ! Component: 2200 - total flux cleaned = -0.000669453 Jy ! Component: 2250 - total flux cleaned = -0.000669323 Jy ! Component: 2300 - total flux cleaned = -0.000554696 Jy ! Component: 2350 - total flux cleaned = -0.000630814 Jy ! Component: 2400 - total flux cleaned = -0.000668588 Jy ! Component: 2450 - total flux cleaned = -0.000706042 Jy ! Component: 2500 - total flux cleaned = -0.00066895 Jy ! Component: 2550 - total flux cleaned = -0.000705501 Jy ! Component: 2600 - total flux cleaned = -0.000778914 Jy ! Component: 2650 - total flux cleaned = -0.000779102 Jy ! Component: 2700 - total flux cleaned = -0.000887637 Jy ! Component: 2750 - total flux cleaned = -0.000995278 Jy ! Component: 2800 - total flux cleaned = -0.00103098 Jy ! Component: 2850 - total flux cleaned = -0.00103066 Jy ! Component: 2900 - total flux cleaned = -0.00106562 Jy ! Component: 2950 - total flux cleaned = -0.00103036 Jy ! Component: 3000 - total flux cleaned = -0.000960857 Jy ! Component: 3050 - total flux cleaned = -0.00109869 Jy ! Component: 3100 - total flux cleaned = -0.00109834 Jy ! Component: 3150 - total flux cleaned = -0.00109835 Jy ! Component: 3200 - total flux cleaned = -0.000996619 Jy ! Component: 3250 - total flux cleaned = -0.00109784 Jy ! Component: 3300 - total flux cleaned = -0.00106429 Jy ! Component: 3350 - total flux cleaned = -0.00116426 Jy ! Component: 3400 - total flux cleaned = -0.000998417 Jy ! Component: 3450 - total flux cleaned = -0.00103119 Jy ! Component: 3500 - total flux cleaned = -0.00103093 Jy ! Component: 3550 - total flux cleaned = -0.00109606 Jy ! Component: 3600 - total flux cleaned = -0.000998229 Jy ! Component: 3650 - total flux cleaned = -0.00106321 Jy ! Component: 3700 - total flux cleaned = -0.0010954 Jy ! Component: 3750 - total flux cleaned = -0.00109532 Jy ! Component: 3800 - total flux cleaned = -0.00119116 Jy ! Component: 3850 - total flux cleaned = -0.00115962 Jy ! Component: 3900 - total flux cleaned = -0.00112779 Jy ! Component: 3950 - total flux cleaned = -0.00125399 Jy ! Component: 4000 - total flux cleaned = -0.00115971 Jy ! Component: 4050 - total flux cleaned = -0.00122237 Jy ! Total flux subtracted in 4096 components = -0.00125343 Jy ! Clean residual min=-0.002368 max=0.002061 Jy/beam ! Clean residual mean=0.000003 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.574113 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 445 components and 0.574112 Jy ![Exited script file: muppet] wmap "J0449+1121_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.816 x 12.19 at 24.13 degrees (North through East) ! Clean map min=-0.0038638 max=0.44399 Jy/beam ! Writing clean map to FITS file: J0449+1121_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.443993 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00056 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.378384 0.378384 0.756768 1.51354 3.02707 6.05415 12.1083 24.2166 48.4332 96.8663 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.443 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.816 x 12.19 at 24.13 degrees (North through East) ! Clean map min=-0.0038638 max=0.44399 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0449+1121_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:05:10 2019