! Started logfile: J0449+0729_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:39 2019 obs J0449+0729_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0449+0729_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.773212 visibilities/baseline/integration-bin. ! Found source: J0449+0729 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16256 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0449+0729_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 174 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 219 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 777 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960108Jy sigma=0.009828 ! Fit after self-cal, rms=0.937648Jy sigma=0.009630 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=12.06 mas, bpa=-20.03 degrees ! Estimated noise=1051.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479437 Jy ! Component: 100 - total flux cleaned = 0.0593559 Jy ! Total flux subtracted in 100 components = 0.0593559 Jy ! Clean residual min=-0.004372 max=0.005415 Jy/beam ! Clean residual mean=-0.000005 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.0593559 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0593559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074924Jy sigma=0.000694 ! Fit after self-cal, rms=0.074742Jy sigma=0.000693 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=13.28 mas, bpa=-19.4 degrees ! Estimated noise=645.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0064464 Jy ! Component: 100 - total flux cleaned = 0.00903344 Jy ! Component: 150 - total flux cleaned = 0.010469 Jy ! Component: 200 - total flux cleaned = 0.0113797 Jy ! Total flux subtracted in 200 components = 0.0113797 Jy ! Clean residual min=-0.002847 max=0.002599 Jy/beam ! Clean residual mean=-0.000005 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0707356 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 47 components and 0.0707356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074177Jy sigma=0.000688 ! Fit after self-cal, rms=0.074124Jy sigma=0.000688 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.05 KP 1.10 ! LA 1.06 MK 1.04 NL 0.93 OV 1.01 ! PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.00 HN 1.03 KP 1.07 ! LA 0.98 MK 1.10 NL 1.05 OV 1.03 ! PT 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 0.99 KP 1.06 ! LA 0.82 MK 1.12 NL 1.14 OV 0.95 ! PT 0.89 ! ! ! Correcting IF 4. ! A total of 213 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 HN 0.88 KP 1.00* ! LA 0.77 MK 0.92 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.074124Jy sigma=0.000688 ! Fit after self-cal, rms=0.071134Jy sigma=0.000685 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.798 mas, bmaj=13.19 mas, bpa=-19.35 degrees ! Estimated noise=650.417 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000307471 Jy ! Component: 100 - total flux cleaned = -0.000227022 Jy ! Component: 150 - total flux cleaned = -0.000161585 Jy ! Component: 200 - total flux cleaned = -9.24909e-05 Jy ! Total flux subtracted in 200 components = -9.24909e-05 Jy ! Clean residual min=-0.001799 max=0.001690 Jy/beam ! Clean residual mean=0.000004 rms=0.000437 Jy/beam ! Combined flux in latest and established models = 0.0706431 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 0.0706431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071121Jy sigma=0.000685 ! Fit after self-cal, rms=0.071145Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071145Jy sigma=0.000685 ! Fit after self-cal, rms=0.071394Jy sigma=0.000684 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.811 mas, bmaj=13.2 mas, bpa=-19.32 degrees ! Estimated noise=650.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107522 Jy ! Component: 100 - total flux cleaned = -5.93354e-05 Jy ! Component: 150 - total flux cleaned = -1.97019e-05 Jy ! Component: 200 - total flux cleaned = -1.94282e-05 Jy ! Total flux subtracted in 200 components = -1.94282e-05 Jy ! Clean residual min=-0.001501 max=0.001653 Jy/beam ! Clean residual mean=0.000000 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0706236 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.0706236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071387Jy sigma=0.000684 ! Fit after self-cal, rms=0.071458Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000104757 Jy ! Component: 100 - total flux cleaned = 0.000117474 Jy ! Component: 150 - total flux cleaned = 0.000106336 Jy ! Component: 200 - total flux cleaned = 8.71724e-05 Jy ! Total flux subtracted in 200 components = 8.71724e-05 Jy ! Clean residual min=-0.001482 max=0.001645 Jy/beam ! Clean residual mean=0.000001 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.0707108 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 83 components and 0.0707108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071453Jy sigma=0.000684 ! Fit after self-cal, rms=0.071455Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071455Jy sigma=0.000684 ! Fit after self-cal, rms=0.071733Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.812 mas, bmaj=13.21 mas, bpa=-19.3 degrees ! Estimated noise=651.269 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.25804e-05 Jy ! Component: 100 - total flux cleaned = -3.95509e-05 Jy ! Component: 150 - total flux cleaned = -3.93787e-05 Jy ! Component: 200 - total flux cleaned = -4.76916e-05 Jy ! Total flux subtracted in 200 components = -4.76916e-05 Jy ! Clean residual min=-0.001438 max=0.001664 Jy/beam ! Clean residual mean=0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0706631 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 91 components and 0.0706631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071730Jy sigma=0.000684 ! Fit after self-cal, rms=0.071768Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.98102e-05 Jy ! Component: 100 - total flux cleaned = 5.27728e-05 Jy ! Component: 150 - total flux cleaned = 6.07529e-05 Jy ! Component: 200 - total flux cleaned = 5.33062e-05 Jy ! Total flux subtracted in 200 components = 5.33062e-05 Jy ! Clean residual min=-0.001425 max=0.001668 Jy/beam ! Clean residual mean=0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0707164 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 92 components and 0.0707164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071766Jy sigma=0.000684 ! Fit after self-cal, rms=0.071767Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071767Jy sigma=0.000684 ! Fit after self-cal, rms=0.071970Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.375 mas, bmaj=13.53 mas, bpa=-17.09 degrees ! Estimated noise=751.839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170196 Jy ! Component: 100 - total flux cleaned = 0.00013632 Jy ! Component: 150 - total flux cleaned = 0.000116585 Jy ! Component: 200 - total flux cleaned = 9.96025e-05 Jy ! Total flux subtracted in 200 components = 9.96025e-05 Jy ! Clean residual min=-0.001752 max=0.001683 Jy/beam ! Clean residual mean=0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.070816 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.070816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071969Jy sigma=0.000684 ! Fit after self-cal, rms=0.071994Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.48e-05 Jy ! Component: 100 - total flux cleaned = 5.76761e-06 Jy ! Component: 150 - total flux cleaned = -1.86182e-06 Jy ! Component: 200 - total flux cleaned = -9.00514e-06 Jy ! Total flux subtracted in 200 components = -9.00514e-06 Jy ! Clean residual min=-0.001752 max=0.001686 Jy/beam ! Clean residual mean=-0.000000 rms=0.000452 Jy/beam ! Combined flux in latest and established models = 0.070807 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 109 components and 0.070807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071993Jy sigma=0.000684 ! Fit after self-cal, rms=0.071994Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=13.21 mas, bpa=-19.28 degrees ! Estimated noise=651.768 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.815 x 13.21 at -19.28 degrees (North through East) ! Clean map min=-0.0018386 max=0.063023 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=12.1 mas, bpa=-19.94 degrees ! Estimated noise=1072.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478286 Jy ! Component: 100 - total flux cleaned = 0.0595989 Jy ! Component: 150 - total flux cleaned = 0.0647077 Jy ! Component: 200 - total flux cleaned = 0.0666606 Jy ! Total flux subtracted in 200 components = 0.0666606 Jy ! Clean residual min=-0.002679 max=0.002677 Jy/beam ! Clean residual mean=0.000000 rms=0.000696 Jy/beam ! Combined flux in latest and established models = 0.0666606 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0666606 Jy ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=13.21 mas, bpa=-19.28 degrees ! Estimated noise=651.768 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00245058 Jy ! Component: 100 - total flux cleaned = 0.0031077 Jy ! Component: 150 - total flux cleaned = 0.00339158 Jy ! Component: 200 - total flux cleaned = 0.00351909 Jy ! Total flux subtracted in 200 components = 0.00351909 Jy ! Clean residual min=-0.001688 max=0.001715 Jy/beam ! Clean residual mean=0.000000 rms=0.000415 Jy/beam ! Combined flux in latest and established models = 0.0701797 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 48 components and 0.0701797 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.375 mas, bmaj=13.53 mas, bpa=-17.09 degrees ! Estimated noise=751.839 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000776167 Jy ! Component: 100 - total flux cleaned = 0.000793954 Jy ! Component: 150 - total flux cleaned = 0.000765087 Jy ! Component: 200 - total flux cleaned = 0.000738458 Jy ! Total flux subtracted in 200 components = 0.000738458 Jy ! Clean residual min=-0.001769 max=0.001701 Jy/beam ! Clean residual mean=-0.000000 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0709182 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.56052e-05 Jy ! Component: 100 - total flux cleaned = -5.68651e-05 Jy ! Component: 150 - total flux cleaned = -6.68595e-05 Jy ! Component: 200 - total flux cleaned = -7.64378e-05 Jy ! Total flux subtracted in 200 components = -7.64378e-05 Jy ! Clean residual min=-0.001754 max=0.001698 Jy/beam ! Clean residual mean=-0.000000 rms=0.000454 Jy/beam ! Combined flux in latest and established models = 0.0708417 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 81 components and 0.0708417 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.815 mas, bmaj=13.21 mas, bpa=-19.28 degrees ! Estimated noise=651.768 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.37966e-05 Jy ! Component: 100 - total flux cleaned = -0.000133975 Jy ! Component: 150 - total flux cleaned = -0.00017877 Jy ! Component: 200 - total flux cleaned = -0.000191507 Jy ! Total flux subtracted in 200 components = -0.000191507 Jy ! Clean residual min=-0.001461 max=0.001710 Jy/beam ! Clean residual mean=0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0706502 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 0.0706502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071996Jy sigma=0.000684 ! Fit after self-cal, rms=0.071996Jy sigma=0.000684 wmodel J0449+0729_S_2017_10_21_pus_map.mod ! Writing 94 model components to file: J0449+0729_S_2017_10_21_pus_map.mod wobs J0449+0729_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0449+0729_S_2017_10_21_pus_uvs.fits wwins J0449+0729_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0449+0729_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00022678 Jy ! Component: 100 - total flux cleaned = 0.000398496 Jy ! Component: 150 - total flux cleaned = 0.0004918 Jy ! Component: 200 - total flux cleaned = 0.000514311 Jy ! Component: 250 - total flux cleaned = 0.000493406 Jy ! Component: 300 - total flux cleaned = 0.000473464 Jy ! Component: 350 - total flux cleaned = 0.000473046 Jy ! Component: 400 - total flux cleaned = 0.000453953 Jy ! Component: 450 - total flux cleaned = 0.000417519 Jy ! Component: 500 - total flux cleaned = 0.000417624 Jy ! Component: 550 - total flux cleaned = 0.000382913 Jy ! Component: 600 - total flux cleaned = 0.000365996 Jy ! Component: 650 - total flux cleaned = 0.000300952 Jy ! Component: 700 - total flux cleaned = 0.000301077 Jy ! Component: 750 - total flux cleaned = 0.000270531 Jy ! Component: 800 - total flux cleaned = 0.000270792 Jy ! Component: 850 - total flux cleaned = 0.000270969 Jy ! Component: 900 - total flux cleaned = 0.000285384 Jy ! Component: 950 - total flux cleaned = 0.00029939 Jy ! Component: 1000 - total flux cleaned = 0.000285438 Jy ! Component: 1050 - total flux cleaned = 0.000285539 Jy ! Component: 1100 - total flux cleaned = 0.000272227 Jy ! Component: 1150 - total flux cleaned = 0.000285302 Jy ! Component: 1200 - total flux cleaned = 0.000285228 Jy ! Component: 1250 - total flux cleaned = 0.000247613 Jy ! Component: 1300 - total flux cleaned = 0.000297097 Jy ! Component: 1350 - total flux cleaned = 0.000321408 Jy ! Component: 1400 - total flux cleaned = 0.000333255 Jy ! Component: 1450 - total flux cleaned = 0.00033346 Jy ! Component: 1500 - total flux cleaned = 0.000391384 Jy ! Component: 1550 - total flux cleaned = 0.000448206 Jy ! Component: 1600 - total flux cleaned = 0.000504187 Jy ! Component: 1650 - total flux cleaned = 0.000559289 Jy ! Component: 1700 - total flux cleaned = 0.000591974 Jy ! Component: 1750 - total flux cleaned = 0.00066686 Jy ! Component: 1800 - total flux cleaned = 0.000687956 Jy ! Component: 1850 - total flux cleaned = 0.000688101 Jy ! Component: 1900 - total flux cleaned = 0.000760428 Jy ! Component: 1950 - total flux cleaned = 0.000780881 Jy ! Component: 2000 - total flux cleaned = 0.000830912 Jy ! Component: 2050 - total flux cleaned = 0.000860504 Jy ! Component: 2100 - total flux cleaned = 0.000889965 Jy ! Component: 2150 - total flux cleaned = 0.000909374 Jy ! Component: 2200 - total flux cleaned = 0.000947728 Jy ! Component: 2250 - total flux cleaned = 0.000995056 Jy ! Component: 2300 - total flux cleaned = 0.00101391 Jy ! Component: 2350 - total flux cleaned = 0.00107874 Jy ! Component: 2400 - total flux cleaned = 0.00106966 Jy ! Component: 2450 - total flux cleaned = 0.00111508 Jy ! Component: 2500 - total flux cleaned = 0.00115102 Jy ! Component: 2550 - total flux cleaned = 0.0011777 Jy ! Component: 2600 - total flux cleaned = 0.00117769 Jy ! Component: 2650 - total flux cleaned = 0.00118646 Jy ! Component: 2700 - total flux cleaned = 0.00120396 Jy ! Component: 2750 - total flux cleaned = 0.00121259 Jy ! Component: 2800 - total flux cleaned = 0.00118684 Jy ! Component: 2850 - total flux cleaned = 0.00116135 Jy ! Component: 2900 - total flux cleaned = 0.00116138 Jy ! Component: 2950 - total flux cleaned = 0.00116144 Jy ! Component: 3000 - total flux cleaned = 0.00118643 Jy ! Component: 3050 - total flux cleaned = 0.0011699 Jy ! Component: 3100 - total flux cleaned = 0.00117815 Jy ! Component: 3150 - total flux cleaned = 0.00119447 Jy ! Component: 3200 - total flux cleaned = 0.00118633 Jy ! Component: 3250 - total flux cleaned = 0.00121048 Jy ! Component: 3300 - total flux cleaned = 0.00119435 Jy ! Component: 3350 - total flux cleaned = 0.0011864 Jy ! Component: 3400 - total flux cleaned = 0.00119441 Jy ! Component: 3450 - total flux cleaned = 0.0011944 Jy ! Component: 3500 - total flux cleaned = 0.0011944 Jy ! Component: 3550 - total flux cleaned = 0.00118661 Jy ! Component: 3600 - total flux cleaned = 0.00119444 Jy ! Component: 3650 - total flux cleaned = 0.00118669 Jy ! Component: 3700 - total flux cleaned = 0.00117901 Jy ! Component: 3750 - total flux cleaned = 0.00117135 Jy ! Component: 3800 - total flux cleaned = 0.00114098 Jy ! Component: 3850 - total flux cleaned = 0.00117126 Jy ! Component: 3900 - total flux cleaned = 0.00116372 Jy ! Component: 3950 - total flux cleaned = 0.00114123 Jy ! Component: 4000 - total flux cleaned = 0.00112629 Jy ! Component: 4050 - total flux cleaned = 0.00111885 Jy ! Total flux subtracted in 4096 components = 0.00111884 Jy ! Clean residual min=-0.000484 max=0.000440 Jy/beam ! Clean residual mean=-0.000000 rms=0.000135 Jy/beam ! Combined flux in latest and established models = 0.0717691 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 367 components and 0.071769 Jy ![Exited script file: muppet] wmap "J0449+0729_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.815 x 13.21 at -19.28 degrees (North through East) ! Clean map min=-0.0016471 max=0.062854 Jy/beam ! Writing clean map to FITS file: J0449+0729_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0628539 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000131281 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.6266 0.6266 1.2532 2.5064 5.0128 10.0256 20.0512 40.1024 80.2048 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.815 x 13.21 at -19.28 degrees (North through East) ! Clean map min=-0.0016471 max=0.062854 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0449+0729_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:44 2019