! Started logfile: J0443+3441_S_2017_02_19_pus_uvs.log on Sat May 4 18:42:41 2019 obs J0443+3441_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0443+3441_S_2017_02_19_pus_uva.fits ! AN table 1: 12 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.722222 visibilities/baseline/integration-bin. ! Found source: J0443+3441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0443+3441_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.536032Jy sigma=0.005008 ! Fit after self-cal, rms=0.532977Jy sigma=0.004982 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=7.734 mas, bpa=29.44 degrees ! Estimated noise=2816.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.359803 Jy ! Component: 100 - total flux cleaned = 0.443392 Jy ! Total flux subtracted in 100 components = 0.443392 Jy ! Clean residual min=-0.023491 max=0.032037 Jy/beam ! Clean residual mean=-0.000087 rms=0.006548 Jy/beam ! Combined flux in latest and established models = 0.443392 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.443392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121348Jy sigma=0.000975 ! Fit after self-cal, rms=0.121303Jy sigma=0.000975 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.372 mas, bmaj=7.972 mas, bpa=29.93 degrees ! Estimated noise=2155.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441554 Jy ! Component: 100 - total flux cleaned = 0.0686042 Jy ! Component: 150 - total flux cleaned = 0.0840634 Jy ! Component: 200 - total flux cleaned = 0.0948753 Jy ! Total flux subtracted in 200 components = 0.0948753 Jy ! Clean residual min=-0.017914 max=0.014503 Jy/beam ! Clean residual mean=-0.000056 rms=0.003836 Jy/beam ! Combined flux in latest and established models = 0.538268 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 54 components and 0.538268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100656Jy sigma=0.000816 ! Fit after self-cal, rms=0.100529Jy sigma=0.000814 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 1.03 ! LA 1.00 MK 1.04 NL 0.87 OV 1.02 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.04 HN 1.02 KP 0.98 ! LA 0.95 MK 1.03 NL 1.02 OV 1.07 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.05 HN 0.97 KP 0.87 ! LA 0.77 MK 1.05 NL 1.13 OV 0.95 ! PT 1.00* SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.10 HN 0.94 KP 1.00* ! LA 0.81 MK 1.32 NL 1.00* OV 0.98 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100529Jy sigma=0.000814 ! Fit after self-cal, rms=0.076085Jy sigma=0.000660 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=8.007 mas, bpa=30.03 degrees ! Estimated noise=2137.68 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000721478 Jy ! Component: 100 - total flux cleaned = 0.00200275 Jy ! Component: 150 - total flux cleaned = 0.00288307 Jy ! Component: 200 - total flux cleaned = 0.00356033 Jy ! Total flux subtracted in 200 components = 0.00356033 Jy ! Clean residual min=-0.004434 max=0.004742 Jy/beam ! Clean residual mean=-0.000004 rms=0.001220 Jy/beam ! Combined flux in latest and established models = 0.541828 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 64 components and 0.541828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075841Jy sigma=0.000658 ! Fit after self-cal, rms=0.075835Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075835Jy sigma=0.000658 ! Fit after self-cal, rms=0.075820Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8 mas, bpa=30 degrees ! Estimated noise=2137.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000615747 Jy ! Component: 100 - total flux cleaned = 0.00137328 Jy ! Component: 150 - total flux cleaned = 0.0018872 Jy ! Component: 200 - total flux cleaned = 0.00214687 Jy ! Total flux subtracted in 200 components = 0.00214687 Jy ! Clean residual min=-0.004317 max=0.004626 Jy/beam ! Clean residual mean=-0.000003 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.543975 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.543975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075758Jy sigma=0.000657 ! Fit after self-cal, rms=0.075758Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116946 Jy ! Component: 100 - total flux cleaned = 0.00033753 Jy ! Component: 150 - total flux cleaned = 0.000502771 Jy ! Component: 200 - total flux cleaned = 0.000647512 Jy ! Total flux subtracted in 200 components = 0.000647512 Jy ! Clean residual min=-0.004302 max=0.004618 Jy/beam ! Clean residual mean=-0.000003 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.544622 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 76 components and 0.544623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075737Jy sigma=0.000657 ! Fit after self-cal, rms=0.075737Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075737Jy sigma=0.000656 ! Fit after self-cal, rms=0.075731Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=7.995 mas, bpa=29.99 degrees ! Estimated noise=2137.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000809638 Jy ! Component: 100 - total flux cleaned = 0.00114718 Jy ! Component: 150 - total flux cleaned = 0.00136295 Jy ! Component: 200 - total flux cleaned = 0.00143964 Jy ! Total flux subtracted in 200 components = 0.00143964 Jy ! Clean residual min=-0.004196 max=0.004560 Jy/beam ! Clean residual mean=-0.000003 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.546062 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.546062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075713Jy sigma=0.000656 ! Fit after self-cal, rms=0.075714Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50885e-05 Jy ! Component: 100 - total flux cleaned = 0.000139975 Jy ! Component: 150 - total flux cleaned = 0.000174391 Jy ! Component: 200 - total flux cleaned = 0.000238629 Jy ! Total flux subtracted in 200 components = 0.000238629 Jy ! Clean residual min=-0.004178 max=0.004585 Jy/beam ! Clean residual mean=-0.000003 rms=0.001132 Jy/beam ! Combined flux in latest and established models = 0.546301 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 84 components and 0.546301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075705Jy sigma=0.000656 ! Fit after self-cal, rms=0.075705Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075705Jy sigma=0.000656 ! Fit after self-cal, rms=0.075696Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.576 mas, bmaj=9.264 mas, bpa=22.35 degrees ! Estimated noise=2699.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001379 Jy ! Component: 100 - total flux cleaned = 0.00224089 Jy ! Component: 150 - total flux cleaned = 0.00251557 Jy ! Component: 200 - total flux cleaned = 0.00264232 Jy ! Total flux subtracted in 200 components = 0.00264232 Jy ! Clean residual min=-0.004516 max=0.004719 Jy/beam ! Clean residual mean=0.000001 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.548943 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 95 components and 0.548943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075691Jy sigma=0.000656 ! Fit after self-cal, rms=0.075692Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.98959e-05 Jy ! Component: 100 - total flux cleaned = 0.00014651 Jy ! Component: 150 - total flux cleaned = 0.000215323 Jy ! Component: 200 - total flux cleaned = 0.000262501 Jy ! Total flux subtracted in 200 components = 0.000262501 Jy ! Clean residual min=-0.004545 max=0.004707 Jy/beam ! Clean residual mean=0.000001 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 0.549206 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 100 components and 0.549206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075692Jy sigma=0.000656 ! Fit after self-cal, rms=0.075693Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.993 mas, bpa=29.99 degrees ! Estimated noise=2137.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.993 at 29.99 degrees (North through East) ! Clean map min=-0.0039369 max=0.46394 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.727 mas, bpa=29.49 degrees ! Estimated noise=2797.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.357322 Jy ! Component: 100 - total flux cleaned = 0.43944 Jy ! Component: 150 - total flux cleaned = 0.473546 Jy ! Component: 200 - total flux cleaned = 0.494062 Jy ! Total flux subtracted in 200 components = 0.494062 Jy ! Clean residual min=-0.008659 max=0.010692 Jy/beam ! Clean residual mean=-0.000024 rms=0.002534 Jy/beam ! Combined flux in latest and established models = 0.494062 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.494062 Jy ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.993 mas, bpa=29.99 degrees ! Estimated noise=2137.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165183 Jy ! Component: 100 - total flux cleaned = 0.0265652 Jy ! Component: 150 - total flux cleaned = 0.033401 Jy ! Component: 200 - total flux cleaned = 0.0382083 Jy ! Total flux subtracted in 200 components = 0.0382083 Jy ! Clean residual min=-0.004841 max=0.005127 Jy/beam ! Clean residual mean=-0.000014 rms=0.001328 Jy/beam ! Combined flux in latest and established models = 0.53227 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.53227 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.576 mas, bmaj=9.264 mas, bpa=22.35 degrees ! Estimated noise=2699.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057296 Jy ! Component: 100 - total flux cleaned = 0.00919045 Jy ! Component: 150 - total flux cleaned = 0.0115099 Jy ! Component: 200 - total flux cleaned = 0.0130946 Jy ! Total flux subtracted in 200 components = 0.0130946 Jy ! Clean residual min=-0.004686 max=0.004790 Jy/beam ! Clean residual mean=-0.000005 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.545365 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108664 Jy ! Component: 100 - total flux cleaned = 0.0018321 Jy ! Component: 150 - total flux cleaned = 0.00234375 Jy ! Component: 200 - total flux cleaned = 0.00257066 Jy ! Total flux subtracted in 200 components = 0.00257066 Jy ! Clean residual min=-0.004480 max=0.004778 Jy/beam ! Clean residual mean=-0.000001 rms=0.001318 Jy/beam ! Combined flux in latest and established models = 0.547935 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 87 components and 0.547935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=7.993 mas, bpa=29.99 degrees ! Estimated noise=2137.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000809879 Jy ! Component: 100 - total flux cleaned = -0.00115382 Jy ! Component: 150 - total flux cleaned = -0.00140062 Jy ! Component: 200 - total flux cleaned = -0.00153329 Jy ! Total flux subtracted in 200 components = -0.00153329 Jy ! Clean residual min=-0.004336 max=0.004457 Jy/beam ! Clean residual mean=-0.000004 rms=0.001141 Jy/beam ! Combined flux in latest and established models = 0.546402 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 95 components and 0.546402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075724Jy sigma=0.000657 ! Fit after self-cal, rms=0.075722Jy sigma=0.000656 wmodel J0443+3441_S_2017_02_19_pus_map.mod ! Writing 95 model components to file: J0443+3441_S_2017_02_19_pus_map.mod wobs J0443+3441_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0443+3441_S_2017_02_19_pus_uvs.fits wwins J0443+3441_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0443+3441_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258453 Jy ! Component: 100 - total flux cleaned = 0.00018536 Jy ! Component: 150 - total flux cleaned = 0.000119795 Jy ! Component: 200 - total flux cleaned = 0.000316872 Jy ! Component: 250 - total flux cleaned = 0.000563581 Jy ! Component: 300 - total flux cleaned = 0.000681786 Jy ! Component: 350 - total flux cleaned = 0.00085309 Jy ! Component: 400 - total flux cleaned = 0.00112783 Jy ! Component: 450 - total flux cleaned = 0.00139148 Jy ! Component: 500 - total flux cleaned = 0.00154459 Jy ! Component: 550 - total flux cleaned = 0.00174344 Jy ! Component: 600 - total flux cleaned = 0.00198318 Jy ! Component: 650 - total flux cleaned = 0.00212276 Jy ! Component: 700 - total flux cleaned = 0.00234731 Jy ! Component: 750 - total flux cleaned = 0.00269875 Jy ! Component: 800 - total flux cleaned = 0.00295549 Jy ! Component: 850 - total flux cleaned = 0.00333187 Jy ! Component: 900 - total flux cleaned = 0.0036986 Jy ! Component: 950 - total flux cleaned = 0.00405775 Jy ! Component: 1000 - total flux cleaned = 0.00441015 Jy ! Component: 1050 - total flux cleaned = 0.00475538 Jy ! Component: 1100 - total flux cleaned = 0.00505538 Jy ! Component: 1150 - total flux cleaned = 0.00527668 Jy ! Component: 1200 - total flux cleaned = 0.00556655 Jy ! Component: 1250 - total flux cleaned = 0.00578009 Jy ! Component: 1300 - total flux cleaned = 0.00612943 Jy ! Component: 1350 - total flux cleaned = 0.00633436 Jy ! Component: 1400 - total flux cleaned = 0.0065031 Jy ! Component: 1450 - total flux cleaned = 0.0066694 Jy ! Component: 1500 - total flux cleaned = 0.00696238 Jy ! Component: 1550 - total flux cleaned = 0.00718597 Jy ! Component: 1600 - total flux cleaned = 0.00737514 Jy ! Component: 1650 - total flux cleaned = 0.00762312 Jy ! Component: 1700 - total flux cleaned = 0.0078062 Jy ! Component: 1750 - total flux cleaned = 0.00795682 Jy ! Component: 1800 - total flux cleaned = 0.00810466 Jy ! Component: 1850 - total flux cleaned = 0.00822152 Jy ! Component: 1900 - total flux cleaned = 0.00839428 Jy ! Component: 1950 - total flux cleaned = 0.00859254 Jy ! Component: 2000 - total flux cleaned = 0.00864858 Jy ! Component: 2050 - total flux cleaned = 0.0087873 Jy ! Component: 2100 - total flux cleaned = 0.00892369 Jy ! Component: 2150 - total flux cleaned = 0.00900448 Jy ! Component: 2200 - total flux cleaned = 0.00913786 Jy ! Component: 2250 - total flux cleaned = 0.00924338 Jy ! Component: 2300 - total flux cleaned = 0.00942602 Jy ! Component: 2350 - total flux cleaned = 0.0094001 Jy ! Component: 2400 - total flux cleaned = 0.0094002 Jy ! Component: 2450 - total flux cleaned = 0.00940044 Jy ! Component: 2500 - total flux cleaned = 0.0094255 Jy ! Component: 2550 - total flux cleaned = 0.00932517 Jy ! Component: 2600 - total flux cleaned = 0.00935012 Jy ! Component: 2650 - total flux cleaned = 0.00927583 Jy ! Component: 2700 - total flux cleaned = 0.00925114 Jy ! Component: 2750 - total flux cleaned = 0.00920216 Jy ! Component: 2800 - total flux cleaned = 0.00920206 Jy ! Component: 2850 - total flux cleaned = 0.00920212 Jy ! Component: 2900 - total flux cleaned = 0.00917804 Jy ! Component: 2950 - total flux cleaned = 0.00915415 Jy ! Component: 3000 - total flux cleaned = 0.00913036 Jy ! Component: 3050 - total flux cleaned = 0.00905929 Jy ! Component: 3100 - total flux cleaned = 0.00898844 Jy ! Component: 3150 - total flux cleaned = 0.00887114 Jy ! Component: 3200 - total flux cleaned = 0.00877754 Jy ! Component: 3250 - total flux cleaned = 0.00868416 Jy ! Component: 3300 - total flux cleaned = 0.00856785 Jy ! Component: 3350 - total flux cleaned = 0.00847499 Jy ! Component: 3400 - total flux cleaned = 0.00835952 Jy ! Component: 3450 - total flux cleaned = 0.00822105 Jy ! Component: 3500 - total flux cleaned = 0.008152 Jy ! Component: 3550 - total flux cleaned = 0.00796811 Jy ! Component: 3600 - total flux cleaned = 0.0078305 Jy ! Component: 3650 - total flux cleaned = 0.00776173 Jy ! Component: 3700 - total flux cleaned = 0.00755585 Jy ! Component: 3750 - total flux cleaned = 0.0075102 Jy ! Component: 3800 - total flux cleaned = 0.00735037 Jy ! Component: 3850 - total flux cleaned = 0.00721347 Jy ! Component: 3900 - total flux cleaned = 0.00707661 Jy ! Component: 3950 - total flux cleaned = 0.00691697 Jy ! Component: 4000 - total flux cleaned = 0.00675749 Jy ! Component: 4050 - total flux cleaned = 0.00659806 Jy ! Total flux subtracted in 4096 components = 0.00648415 Jy ! Clean residual min=-0.001368 max=0.001519 Jy/beam ! Clean residual mean=-0.000004 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.552886 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 336 components and 0.552886 Jy ![Exited script file: muppet] wmap "J0443+3441_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.993 at 29.99 degrees (North through East) ! Clean map min=-0.0033334 max=0.46406 Jy/beam ! Writing clean map to FITS file: J0443+3441_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.464056 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000337348 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.218087 0.218087 0.436173 0.872346 1.74469 3.48939 6.97877 13.9575 27.9151 55.8302 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.464 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 7.993 at 29.99 degrees (North through East) ! Clean map min=-0.0033334 max=0.46406 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0443+3441_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:42:46 2019