! Started logfile: J0443+3441_S_2017_01_21_pus_uvs.log on Sun May 5 15:46:21 2019 obs J0443+3441_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0443+3441_S_2017_01_21_pus_uva.fits ! AN table 1: 13 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.724359 visibilities/baseline/integration-bin. ! Found source: J0443+3441 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 1356 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0443+3441_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.552031Jy sigma=0.004682 ! Fit after self-cal, rms=0.545572Jy sigma=0.004625 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=9.468 mas, bpa=30.39 degrees ! Estimated noise=3387.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.353707 Jy ! Component: 100 - total flux cleaned = 0.431399 Jy ! Total flux subtracted in 100 components = 0.431399 Jy ! Clean residual min=-0.017725 max=0.030612 Jy/beam ! Clean residual mean=-0.000115 rms=0.006359 Jy/beam ! Combined flux in latest and established models = 0.431399 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.431399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104206Jy sigma=0.000898 ! Fit after self-cal, rms=0.104207Jy sigma=0.000898 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=10.12 mas, bpa=31.62 degrees ! Estimated noise=2409.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0422251 Jy ! Component: 100 - total flux cleaned = 0.0661706 Jy ! Component: 150 - total flux cleaned = 0.081512 Jy ! Component: 200 - total flux cleaned = 0.0917687 Jy ! Total flux subtracted in 200 components = 0.0917687 Jy ! Clean residual min=-0.012021 max=0.015086 Jy/beam ! Clean residual mean=-0.000055 rms=0.003710 Jy/beam ! Combined flux in latest and established models = 0.523168 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 57 components and 0.523168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087321Jy sigma=0.000707 ! Fit after self-cal, rms=0.087216Jy sigma=0.000706 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.90 HN 1.00* LA 1.07 ! MK 0.96 NL 0.98 OV 0.98 PT 0.96 ! SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 1.00* LA 1.02 ! MK 1.01 NL 1.00 OV 1.00 PT 0.96 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.00* LA 1.03 ! MK 1.03 NL 0.97 OV 0.93 PT 0.96 ! SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00* LA 1.08 ! MK 1.18 NL 1.00* OV 0.94 PT 0.99 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.087216Jy sigma=0.000706 ! Fit after self-cal, rms=0.083161Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=10.24 mas, bpa=31.5 degrees ! Estimated noise=2392.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000117884 Jy ! Component: 100 - total flux cleaned = 0.000540241 Jy ! Component: 150 - total flux cleaned = 0.000634002 Jy ! Component: 200 - total flux cleaned = 0.000856017 Jy ! Total flux subtracted in 200 components = 0.000856017 Jy ! Clean residual min=-0.005829 max=0.006685 Jy/beam ! Clean residual mean=-0.000024 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.524024 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.524024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082899Jy sigma=0.000644 ! Fit after self-cal, rms=0.083016Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083016Jy sigma=0.000644 ! Fit after self-cal, rms=0.083027Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.405 mas, bmaj=10.24 mas, bpa=31.51 degrees ! Estimated noise=2393.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000519277 Jy ! Component: 100 - total flux cleaned = 0.000589 Jy ! Component: 150 - total flux cleaned = 0.000701332 Jy ! Component: 200 - total flux cleaned = 0.000855193 Jy ! Total flux subtracted in 200 components = 0.000855193 Jy ! Clean residual min=-0.005485 max=0.006261 Jy/beam ! Clean residual mean=-0.000021 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.524879 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 69 components and 0.524879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082924Jy sigma=0.000643 ! Fit after self-cal, rms=0.082908Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (65, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227807 Jy ! Component: 100 - total flux cleaned = 0.000831724 Jy ! Component: 150 - total flux cleaned = 0.000148671 Jy ! Component: 200 - total flux cleaned = -0.000187052 Jy ! Total flux subtracted in 200 components = -0.000187052 Jy ! Clean residual min=-0.004805 max=0.004984 Jy/beam ! Clean residual mean=-0.000015 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.524692 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 87 components and 0.524692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082456Jy sigma=0.000638 ! Fit after self-cal, rms=0.082438Jy sigma=0.000638 ! Inverting map ! Added new window around map position (-92, 56.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853386 Jy ! Component: 100 - total flux cleaned = 0.00107968 Jy ! Component: 150 - total flux cleaned = 0.00144369 Jy ! Component: 200 - total flux cleaned = 0.0021316 Jy ! Total flux subtracted in 200 components = 0.0021316 Jy ! Clean residual min=-0.004007 max=0.003668 Jy/beam ! Clean residual mean=-0.000011 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.526823 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 0.526824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082087Jy sigma=0.000635 ! Fit after self-cal, rms=0.082067Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082067Jy sigma=0.000635 ! Fit after self-cal, rms=0.081872Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=10.23 mas, bpa=31.54 degrees ! Estimated noise=2390.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779215 Jy ! Component: 100 - total flux cleaned = 0.00128347 Jy ! Component: 150 - total flux cleaned = 0.00181908 Jy ! Component: 200 - total flux cleaned = 0.00225938 Jy ! Total flux subtracted in 200 components = 0.00225938 Jy ! Clean residual min=-0.003651 max=0.003345 Jy/beam ! Clean residual mean=-0.000005 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.529083 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 135 components and 0.529083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081760Jy sigma=0.000634 ! Fit after self-cal, rms=0.081752Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589096 Jy ! Component: 100 - total flux cleaned = 0.000883157 Jy ! Component: 150 - total flux cleaned = 0.00110656 Jy ! Component: 200 - total flux cleaned = 0.0012666 Jy ! Total flux subtracted in 200 components = 0.0012666 Jy ! Clean residual min=-0.003513 max=0.003112 Jy/beam ! Clean residual mean=-0.000005 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.530349 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 145 components and 0.530349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081678Jy sigma=0.000633 ! Fit after self-cal, rms=0.081676Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081676Jy sigma=0.000633 ! Fit after self-cal, rms=0.081577Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.554 mas, bmaj=11.06 mas, bpa=29 degrees ! Estimated noise=2815.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000195356 Jy ! Component: 100 - total flux cleaned = 0.000562371 Jy ! Component: 150 - total flux cleaned = 0.00123662 Jy ! Component: 200 - total flux cleaned = 0.0017197 Jy ! Total flux subtracted in 200 components = 0.0017197 Jy ! Clean residual min=-0.002686 max=0.002618 Jy/beam ! Clean residual mean=-0.000005 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.532069 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 161 components and 0.532069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081549Jy sigma=0.000633 ! Fit after self-cal, rms=0.081543Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026547 Jy ! Component: 100 - total flux cleaned = 0.000620777 Jy ! Component: 150 - total flux cleaned = 0.00101762 Jy ! Component: 200 - total flux cleaned = 0.00138918 Jy ! Total flux subtracted in 200 components = 0.00138918 Jy ! Clean residual min=-0.002565 max=0.002430 Jy/beam ! Clean residual mean=-0.000005 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.533458 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 170 components and 0.533458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081530Jy sigma=0.000633 ! Fit after self-cal, rms=0.081529Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=10.23 mas, bpa=31.54 degrees ! Estimated noise=2389.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 10.23 at 31.54 degrees (North through East) ! Clean map min=-0.0034171 max=0.45849 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=9.567 mas, bpa=30.37 degrees ! Estimated noise=3368.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.351687 Jy ! Component: 100 - total flux cleaned = 0.429055 Jy ! Component: 150 - total flux cleaned = 0.45777 Jy ! Component: 200 - total flux cleaned = 0.476447 Jy ! Total flux subtracted in 200 components = 0.476447 Jy ! Clean residual min=-0.009523 max=0.012870 Jy/beam ! Clean residual mean=-0.000057 rms=0.003055 Jy/beam ! Combined flux in latest and established models = 0.476447 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.476447 Jy ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=10.23 mas, bpa=31.54 degrees ! Estimated noise=2389.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187477 Jy ! Component: 100 - total flux cleaned = 0.0302501 Jy ! Component: 150 - total flux cleaned = 0.0341912 Jy ! Component: 200 - total flux cleaned = 0.0378442 Jy ! Total flux subtracted in 200 components = 0.0378442 Jy ! Clean residual min=-0.006333 max=0.005749 Jy/beam ! Clean residual mean=-0.000035 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.514292 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 67 components and 0.514292 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.554 mas, bmaj=11.06 mas, bpa=29 degrees ! Estimated noise=2815.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463859 Jy ! Component: 100 - total flux cleaned = 0.00698028 Jy ! Component: 150 - total flux cleaned = 0.00942582 Jy ! Component: 200 - total flux cleaned = 0.010877 Jy ! Total flux subtracted in 200 components = 0.010877 Jy ! Clean residual min=-0.004960 max=0.003239 Jy/beam ! Clean residual mean=-0.000018 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.525169 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117054 Jy ! Component: 100 - total flux cleaned = 0.00231153 Jy ! Component: 150 - total flux cleaned = 0.00318435 Jy ! Component: 200 - total flux cleaned = 0.00398303 Jy ! Total flux subtracted in 200 components = 0.00398303 Jy ! Clean residual min=-0.003947 max=0.002741 Jy/beam ! Clean residual mean=-0.000013 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.529152 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 119 components and 0.529151 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=10.23 mas, bpa=31.54 degrees ! Estimated noise=2389.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020317 Jy ! Component: 100 - total flux cleaned = -0.000167997 Jy ! Component: 150 - total flux cleaned = 0.000284898 Jy ! Component: 200 - total flux cleaned = 0.000288954 Jy ! Total flux subtracted in 200 components = 0.000288954 Jy ! Clean residual min=-0.004072 max=0.003507 Jy/beam ! Clean residual mean=-0.000006 rms=0.001009 Jy/beam ! Combined flux in latest and established models = 0.52944 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 141 components and 0.52944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081922Jy sigma=0.000636 ! Fit after self-cal, rms=0.081877Jy sigma=0.000635 wmodel J0443+3441_S_2017_01_21_pus_map.mod ! Writing 141 model components to file: J0443+3441_S_2017_01_21_pus_map.mod wobs J0443+3441_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0443+3441_S_2017_01_21_pus_uvs.fits wwins J0443+3441_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0443+3441_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119546 Jy ! Component: 100 - total flux cleaned = -0.00172742 Jy ! Component: 150 - total flux cleaned = -0.00217206 Jy ! Component: 200 - total flux cleaned = -0.002279 Jy ! Component: 250 - total flux cleaned = -0.00227907 Jy ! Component: 300 - total flux cleaned = -0.00247384 Jy ! Component: 350 - total flux cleaned = -0.00266041 Jy ! Component: 400 - total flux cleaned = -0.00288501 Jy ! Component: 450 - total flux cleaned = -0.00323316 Jy ! Component: 500 - total flux cleaned = -0.00357111 Jy ! Component: 550 - total flux cleaned = -0.00381775 Jy ! Component: 600 - total flux cleaned = -0.00401738 Jy ! Component: 650 - total flux cleaned = -0.00425069 Jy ! Component: 700 - total flux cleaned = -0.00443985 Jy ! Component: 750 - total flux cleaned = -0.00458674 Jy ! Component: 800 - total flux cleaned = -0.00473058 Jy ! Component: 850 - total flux cleaned = -0.00494059 Jy ! Component: 900 - total flux cleaned = -0.0050423 Jy ! Component: 950 - total flux cleaned = -0.00517575 Jy ! Component: 1000 - total flux cleaned = -0.00527341 Jy ! Component: 1050 - total flux cleaned = -0.005433 Jy ! Component: 1100 - total flux cleaned = -0.00555809 Jy ! Component: 1150 - total flux cleaned = -0.00549703 Jy ! Component: 1200 - total flux cleaned = -0.00558739 Jy ! Component: 1250 - total flux cleaned = -0.00561699 Jy ! Component: 1300 - total flux cleaned = -0.00561688 Jy ! Component: 1350 - total flux cleaned = -0.00556067 Jy ! Component: 1400 - total flux cleaned = -0.00556154 Jy ! Component: 1450 - total flux cleaned = -0.00550677 Jy ! Component: 1500 - total flux cleaned = -0.00539924 Jy ! Component: 1550 - total flux cleaned = -0.00526747 Jy ! Component: 1600 - total flux cleaned = -0.00521568 Jy ! Component: 1650 - total flux cleaned = -0.00521567 Jy ! Component: 1700 - total flux cleaned = -0.00511484 Jy ! Component: 1750 - total flux cleaned = -0.00513955 Jy ! Component: 1800 - total flux cleaned = -0.00506635 Jy ! Component: 1850 - total flux cleaned = -0.00506624 Jy ! Component: 1900 - total flux cleaned = -0.0050422 Jy ! Component: 1950 - total flux cleaned = -0.00501882 Jy ! Component: 2000 - total flux cleaned = -0.00497275 Jy ! Component: 2050 - total flux cleaned = -0.00497333 Jy ! Component: 2100 - total flux cleaned = -0.00490581 Jy ! Component: 2150 - total flux cleaned = -0.00486168 Jy ! Component: 2200 - total flux cleaned = -0.00481759 Jy ! Component: 2250 - total flux cleaned = -0.00477414 Jy ! Component: 2300 - total flux cleaned = -0.00475302 Jy ! Component: 2350 - total flux cleaned = -0.00471037 Jy ! Component: 2400 - total flux cleaned = -0.0046262 Jy ! Component: 2450 - total flux cleaned = -0.0046054 Jy ! Component: 2500 - total flux cleaned = -0.00454327 Jy ! Component: 2550 - total flux cleaned = -0.00450243 Jy ! Component: 2600 - total flux cleaned = -0.004543 Jy ! Component: 2650 - total flux cleaned = -0.00454288 Jy ! Component: 2700 - total flux cleaned = -0.00454284 Jy ! Component: 2750 - total flux cleaned = -0.00448337 Jy ! Component: 2800 - total flux cleaned = -0.00448345 Jy ! Component: 2850 - total flux cleaned = -0.00444428 Jy ! Component: 2900 - total flux cleaned = -0.00434687 Jy ! Component: 2950 - total flux cleaned = -0.00428883 Jy ! Component: 3000 - total flux cleaned = -0.00425042 Jy ! Component: 3050 - total flux cleaned = -0.00428862 Jy ! Component: 3100 - total flux cleaned = -0.00417458 Jy ! Component: 3150 - total flux cleaned = -0.00407994 Jy ! Component: 3200 - total flux cleaned = -0.00398568 Jy ! Component: 3250 - total flux cleaned = -0.00394805 Jy ! Component: 3300 - total flux cleaned = -0.00385434 Jy ! Component: 3350 - total flux cleaned = -0.00376094 Jy ! Component: 3400 - total flux cleaned = -0.00368638 Jy ! Component: 3450 - total flux cleaned = -0.00357485 Jy ! Component: 3500 - total flux cleaned = -0.00346358 Jy ! Component: 3550 - total flux cleaned = -0.0033524 Jy ! Component: 3600 - total flux cleaned = -0.00322288 Jy ! Component: 3650 - total flux cleaned = -0.00313043 Jy ! Component: 3700 - total flux cleaned = -0.00298261 Jy ! Component: 3750 - total flux cleaned = -0.00281641 Jy ! Component: 3800 - total flux cleaned = -0.00272401 Jy ! Component: 3850 - total flux cleaned = -0.00252087 Jy ! Component: 3900 - total flux cleaned = -0.00241007 Jy ! Component: 3950 - total flux cleaned = -0.00233613 Jy ! Component: 4000 - total flux cleaned = -0.00228056 Jy ! Component: 4050 - total flux cleaned = -0.00218784 Jy ! Total flux subtracted in 4096 components = -0.00213218 Jy ! Clean residual min=-0.001125 max=0.001106 Jy/beam ! Clean residual mean=0.000001 rms=0.000316 Jy/beam ! Combined flux in latest and established models = 0.527308 Jy keep ! Adding 235 model components to the UV plane model. ! The established model now contains 376 components and 0.527308 Jy ![Exited script file: muppet] wmap "J0443+3441_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 10.23 at 31.54 degrees (North through East) ! Clean map min=-0.003065 max=0.45739 Jy/beam ! Writing clean map to FITS file: J0443+3441_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.45739 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00032096 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.210516 0.210516 0.421032 0.842065 1.68413 3.36826 6.73652 13.473 26.9461 53.8921 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.457 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.402 x 10.23 at 31.54 degrees (North through East) ! Clean map min=-0.003065 max=0.45739 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0443+3441_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:46:26 2019