! Started logfile: J0441-2952_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:34 2019 obs J0441-2952_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0441-2952_S_2017_10_21_pus_uva.fits ! AN table 1: 114 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.704191 visibilities/baseline/integration-bin. ! Found source: J0441-2952 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 11560 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0441-2952_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 686 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953276Jy sigma=0.007259 ! Fit after self-cal, rms=0.917385Jy sigma=0.006996 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.702 mas, bmaj=12.65 mas, bpa=-24.63 degrees ! Estimated noise=2022.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0562749 Jy ! Component: 100 - total flux cleaned = 0.0765833 Jy ! Total flux subtracted in 100 components = 0.0765833 Jy ! Clean residual min=-0.008511 max=0.009904 Jy/beam ! Clean residual mean=-0.000020 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 0.0765833 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.0765833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112982Jy sigma=0.000766 ! Fit after self-cal, rms=0.112502Jy sigma=0.000764 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=16.29 mas, bpa=-23.43 degrees ! Estimated noise=1082.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221023 Jy ! Component: 100 - total flux cleaned = 0.0327864 Jy ! Component: 150 - total flux cleaned = 0.0387124 Jy ! Component: 200 - total flux cleaned = 0.0421956 Jy ! Total flux subtracted in 200 components = 0.0421956 Jy ! Clean residual min=-0.006585 max=0.011372 Jy/beam ! Clean residual mean=-0.000057 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 0.118779 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 99 components and 0.118779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108405Jy sigma=0.000730 ! Fit after self-cal, rms=0.108166Jy sigma=0.000728 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.83 KP 1.17 ! LA 0.93 MK 1.06 NL 0.91 OV 1.13 ! PT 0.88 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.01 KP 1.17 ! LA 0.88 MK 1.20 NL 1.04 OV 1.11 ! PT 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.04 HN 0.92 KP 1.07 ! LA 0.75 MK 1.01 NL 1.23 OV 1.08 ! PT 0.86 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.84 KP 1.00* ! LA 0.79 MK 0.85 NL 1.00* OV 1.00* ! PT 0.89 ! ! ! Fit before self-cal, rms=0.108166Jy sigma=0.000728 ! Fit after self-cal, rms=0.105580Jy sigma=0.000719 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.739 mas, bmaj=16.45 mas, bpa=-23.41 degrees ! Estimated noise=1078.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, -3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00794645 Jy ! Component: 100 - total flux cleaned = 0.0108484 Jy ! Component: 150 - total flux cleaned = 0.0117101 Jy ! Component: 200 - total flux cleaned = 0.012263 Jy ! Total flux subtracted in 200 components = 0.012263 Jy ! Clean residual min=-0.004284 max=0.005364 Jy/beam ! Clean residual mean=0.000062 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.131042 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 133 components and 0.131042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104964Jy sigma=0.000714 ! Fit after self-cal, rms=0.105052Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105052Jy sigma=0.000711 ! Fit after self-cal, rms=0.104645Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=16.51 mas, bpa=-23.18 degrees ! Estimated noise=1065.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393528 Jy ! Component: 100 - total flux cleaned = 0.00494698 Jy ! Component: 150 - total flux cleaned = 0.00516076 Jy ! Component: 200 - total flux cleaned = 0.00534268 Jy ! Total flux subtracted in 200 components = 0.00534268 Jy ! Clean residual min=-0.003872 max=0.004739 Jy/beam ! Clean residual mean=0.000048 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.136385 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 168 components and 0.136385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104457Jy sigma=0.000709 ! Fit after self-cal, rms=0.104481Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-117, 65). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442215 Jy ! Component: 100 - total flux cleaned = 0.00711432 Jy ! Component: 150 - total flux cleaned = 0.0092017 Jy ! Component: 200 - total flux cleaned = 0.0100522 Jy ! Total flux subtracted in 200 components = 0.0100522 Jy ! Clean residual min=-0.003829 max=0.002739 Jy/beam ! Clean residual mean=0.000009 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.146437 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 198 components and 0.146437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104243Jy sigma=0.000706 ! Fit after self-cal, rms=0.104221Jy sigma=0.000706 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104221Jy sigma=0.000706 ! Fit after self-cal, rms=0.104254Jy sigma=0.000706 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=16.49 mas, bpa=-23.23 degrees ! Estimated noise=1056.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247473 Jy ! Component: 100 - total flux cleaned = 0.00388366 Jy ! Component: 150 - total flux cleaned = 0.00444678 Jy ! Component: 200 - total flux cleaned = 0.00472985 Jy ! Total flux subtracted in 200 components = 0.00472985 Jy ! Clean residual min=-0.003220 max=0.002518 Jy/beam ! Clean residual mean=0.000003 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.151167 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 217 components and 0.151167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104150Jy sigma=0.000705 ! Fit after self-cal, rms=0.104134Jy sigma=0.000705 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105705 Jy ! Component: 100 - total flux cleaned = 0.0014003 Jy ! Component: 150 - total flux cleaned = 0.00155638 Jy ! Component: 200 - total flux cleaned = 0.0016541 Jy ! Total flux subtracted in 200 components = 0.0016541 Jy ! Clean residual min=-0.003024 max=0.002538 Jy/beam ! Clean residual mean=0.000005 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.152821 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 235 components and 0.152821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104072Jy sigma=0.000704 ! Fit after self-cal, rms=0.104070Jy sigma=0.000704 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104070Jy sigma=0.000704 ! Fit after self-cal, rms=0.104195Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.155 mas, bmaj=30.47 mas, bpa=-10.44 degrees ! Estimated noise=1198.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000735384 Jy ! Component: 100 - total flux cleaned = 0.00116833 Jy ! Component: 150 - total flux cleaned = 0.00150415 Jy ! Component: 200 - total flux cleaned = 0.00183533 Jy ! Total flux subtracted in 200 components = 0.00183533 Jy ! Clean residual min=-0.002488 max=0.002811 Jy/beam ! Clean residual mean=0.000015 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.154656 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 270 components and 0.154656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104168Jy sigma=0.000704 ! Fit after self-cal, rms=0.104181Jy sigma=0.000704 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00040115 Jy ! Component: 100 - total flux cleaned = 0.000588271 Jy ! Component: 150 - total flux cleaned = 0.000587588 Jy ! Component: 200 - total flux cleaned = 0.000588739 Jy ! Total flux subtracted in 200 components = 0.000588739 Jy ! Clean residual min=-0.002399 max=0.002851 Jy/beam ! Clean residual mean=0.000016 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.155245 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 286 components and 0.155245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104164Jy sigma=0.000704 ! Fit after self-cal, rms=0.104169Jy sigma=0.000704 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=16.42 mas, bpa=-23.37 degrees ! Estimated noise=1055.84 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.754 x 16.42 at -23.37 degrees (North through East) ! Clean map min=-0.003084 max=0.074765 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.677 mas, bmaj=12.68 mas, bpa=-24.62 degrees ! Estimated noise=2009.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556995 Jy ! Component: 100 - total flux cleaned = 0.0785335 Jy ! Component: 150 - total flux cleaned = 0.0918466 Jy ! Component: 200 - total flux cleaned = 0.101442 Jy ! Total flux subtracted in 200 components = 0.101442 Jy ! Clean residual min=-0.008067 max=0.006509 Jy/beam ! Clean residual mean=0.000014 rms=0.001880 Jy/beam ! Combined flux in latest and established models = 0.101442 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.101442 Jy ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=16.42 mas, bpa=-23.37 degrees ! Estimated noise=1055.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0134305 Jy ! Component: 100 - total flux cleaned = 0.0221674 Jy ! Component: 150 - total flux cleaned = 0.0282239 Jy ! Component: 200 - total flux cleaned = 0.0329559 Jy ! Total flux subtracted in 200 components = 0.0329559 Jy ! Clean residual min=-0.004171 max=0.003052 Jy/beam ! Clean residual mean=-0.000001 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.134398 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 102 components and 0.134398 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.155 mas, bmaj=30.47 mas, bpa=-10.44 degrees ! Estimated noise=1198.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00494006 Jy ! Component: 100 - total flux cleaned = 0.00845179 Jy ! Component: 150 - total flux cleaned = 0.0112771 Jy ! Component: 200 - total flux cleaned = 0.0132634 Jy ! Total flux subtracted in 200 components = 0.0132634 Jy ! Clean residual min=-0.003251 max=0.002962 Jy/beam ! Clean residual mean=0.000006 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.147662 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000983595 Jy ! Component: 100 - total flux cleaned = 0.00179431 Jy ! Component: 150 - total flux cleaned = 0.00259156 Jy ! Component: 200 - total flux cleaned = 0.00324932 Jy ! Total flux subtracted in 200 components = 0.00324932 Jy ! Clean residual min=-0.002771 max=0.002612 Jy/beam ! Clean residual mean=0.000005 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.150911 Jy ! Adding 119 model components to the UV plane model. ! The established model now contains 211 components and 0.150911 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.754 mas, bmaj=16.42 mas, bpa=-23.37 degrees ! Estimated noise=1055.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.07233e-05 Jy ! Component: 100 - total flux cleaned = 0.000287925 Jy ! Component: 150 - total flux cleaned = 0.000652544 Jy ! Component: 200 - total flux cleaned = 0.000911281 Jy ! Total flux subtracted in 200 components = 0.000911281 Jy ! Clean residual min=-0.003264 max=0.002436 Jy/beam ! Clean residual mean=0.000005 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.151822 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 232 components and 0.151822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104239Jy sigma=0.000704 ! Fit after self-cal, rms=0.104228Jy sigma=0.000704 wmodel J0441-2952_S_2017_10_21_pus_map.mod ! Writing 232 model components to file: J0441-2952_S_2017_10_21_pus_map.mod wobs J0441-2952_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0441-2952_S_2017_10_21_pus_uvs.fits wwins J0441-2952_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J0441-2952_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00101557 Jy ! Component: 100 - total flux cleaned = -0.00165215 Jy ! Component: 150 - total flux cleaned = -0.00207143 Jy ! Component: 200 - total flux cleaned = -0.00241963 Jy ! Component: 250 - total flux cleaned = -0.00263943 Jy ! Component: 300 - total flux cleaned = -0.00267517 Jy ! Component: 350 - total flux cleaned = -0.00277688 Jy ! Component: 400 - total flux cleaned = -0.00284213 Jy ! Component: 450 - total flux cleaned = -0.00287349 Jy ! Component: 500 - total flux cleaned = -0.00302701 Jy ! Component: 550 - total flux cleaned = -0.00308704 Jy ! Component: 600 - total flux cleaned = -0.00317559 Jy ! Component: 650 - total flux cleaned = -0.00329121 Jy ! Component: 700 - total flux cleaned = -0.00337608 Jy ! Component: 750 - total flux cleaned = -0.00343181 Jy ! Component: 800 - total flux cleaned = -0.00348562 Jy ! Component: 850 - total flux cleaned = -0.00359193 Jy ! Component: 900 - total flux cleaned = -0.00369622 Jy ! Component: 950 - total flux cleaned = -0.00377337 Jy ! Component: 1000 - total flux cleaned = -0.00384953 Jy ! Component: 1050 - total flux cleaned = -0.00389946 Jy ! Component: 1100 - total flux cleaned = -0.00399773 Jy ! Component: 1150 - total flux cleaned = -0.00406978 Jy ! Component: 1200 - total flux cleaned = -0.00395081 Jy ! Component: 1250 - total flux cleaned = -0.00399786 Jy ! Component: 1300 - total flux cleaned = -0.00399781 Jy ! Component: 1350 - total flux cleaned = -0.0039978 Jy ! Component: 1400 - total flux cleaned = -0.00404238 Jy ! Component: 1450 - total flux cleaned = -0.00401963 Jy ! Component: 1500 - total flux cleaned = -0.00401946 Jy ! Component: 1550 - total flux cleaned = -0.0040195 Jy ! Component: 1600 - total flux cleaned = -0.00406237 Jy ! Component: 1650 - total flux cleaned = -0.00404122 Jy ! Component: 1700 - total flux cleaned = -0.00408331 Jy ! Component: 1750 - total flux cleaned = -0.0040833 Jy ! Component: 1800 - total flux cleaned = -0.00410381 Jy ! Component: 1850 - total flux cleaned = -0.00406313 Jy ! Component: 1900 - total flux cleaned = -0.00408328 Jy ! Component: 1950 - total flux cleaned = -0.00406351 Jy ! Component: 2000 - total flux cleaned = -0.00406365 Jy ! Component: 2050 - total flux cleaned = -0.00408346 Jy ! Component: 2100 - total flux cleaned = -0.00408363 Jy ! Component: 2150 - total flux cleaned = -0.00410296 Jy ! Component: 2200 - total flux cleaned = -0.00408406 Jy ! Component: 2250 - total flux cleaned = -0.00408411 Jy ! Component: 2300 - total flux cleaned = -0.00408407 Jy ! Component: 2350 - total flux cleaned = -0.00404692 Jy ! Component: 2400 - total flux cleaned = -0.0040284 Jy ! Component: 2450 - total flux cleaned = -0.00404656 Jy ! Component: 2500 - total flux cleaned = -0.00402833 Jy ! Component: 2550 - total flux cleaned = -0.0040462 Jy ! Component: 2600 - total flux cleaned = -0.00402812 Jy ! Component: 2650 - total flux cleaned = -0.00404577 Jy ! Component: 2700 - total flux cleaned = -0.00401031 Jy ! Component: 2750 - total flux cleaned = -0.00397516 Jy ! Component: 2800 - total flux cleaned = -0.00409755 Jy ! Component: 2850 - total flux cleaned = -0.004167 Jy ! Component: 2900 - total flux cleaned = -0.00420166 Jy ! Component: 2950 - total flux cleaned = -0.00427055 Jy ! Component: 3000 - total flux cleaned = -0.00425363 Jy ! Component: 3050 - total flux cleaned = -0.00440697 Jy ! Component: 3100 - total flux cleaned = -0.00444076 Jy ! Component: 3150 - total flux cleaned = -0.00452512 Jy ! Component: 3200 - total flux cleaned = -0.00457554 Jy ! Component: 3250 - total flux cleaned = -0.00460902 Jy ! Component: 3300 - total flux cleaned = -0.0046757 Jy ! Component: 3350 - total flux cleaned = -0.00470897 Jy ! Component: 3400 - total flux cleaned = -0.00479168 Jy ! Component: 3450 - total flux cleaned = -0.00485761 Jy ! Component: 3500 - total flux cleaned = -0.00490684 Jy ! Component: 3550 - total flux cleaned = -0.00495597 Jy ! Component: 3600 - total flux cleaned = -0.00505388 Jy ! Component: 3650 - total flux cleaned = -0.00513532 Jy ! Component: 3700 - total flux cleaned = -0.00518401 Jy ! Component: 3750 - total flux cleaned = -0.00528107 Jy ! Component: 3800 - total flux cleaned = -0.00532953 Jy ! Component: 3850 - total flux cleaned = -0.00544235 Jy ! Component: 3900 - total flux cleaned = -0.00552285 Jy ! Component: 3950 - total flux cleaned = -0.00558712 Jy ! Component: 4000 - total flux cleaned = -0.00566752 Jy ! Component: 4050 - total flux cleaned = -0.00574775 Jy ! Total flux subtracted in 4096 components = -0.00584401 Jy ! Clean residual min=-0.000933 max=0.000990 Jy/beam ! Clean residual mean=-0.000010 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 0.145978 Jy keep ! Adding 221 model components to the UV plane model. ! The established model now contains 451 components and 0.145978 Jy ![Exited script file: muppet] wmap "J0441-2952_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.754 x 16.42 at -23.37 degrees (North through East) ! Clean map min=-0.0023688 max=0.072306 Jy/beam ! Writing clean map to FITS file: J0441-2952_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0723059 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000272026 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12865 1.12865 2.25729 4.51459 9.02917 18.0583 36.1167 72.2334 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.754 x 16.42 at -23.37 degrees (North through East) ! Clean map min=-0.0023688 max=0.072306 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0441-2952_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:39 2019