! Started logfile: J0441-2952_S_2017_05_27_pus_uvs.log on Fri May 3 10:56:50 2019 obs J0441-2952_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0441-2952_S_2017_05_27_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.854374 visibilities/baseline/integration-bin. ! Found source: J0441-2952 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14456 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0441-2952_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 71 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 165 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 484 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.970241Jy sigma=0.012961 ! Fit after self-cal, rms=0.922675Jy sigma=0.012820 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=7.212 mas, bpa=-14.43 degrees ! Estimated noise=1484.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519839 Jy ! Component: 100 - total flux cleaned = 0.0661236 Jy ! Total flux subtracted in 100 components = 0.0661236 Jy ! Clean residual min=-0.009698 max=0.014990 Jy/beam ! Clean residual mean=-0.000095 rms=0.003229 Jy/beam ! Combined flux in latest and established models = 0.0661236 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0661236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151709Jy sigma=0.000979 ! Fit after self-cal, rms=0.151516Jy sigma=0.000976 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=9.235 mas, bpa=-14.01 degrees ! Estimated noise=1009 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142972 Jy ! Component: 100 - total flux cleaned = 0.0209701 Jy ! Component: 150 - total flux cleaned = 0.0243156 Jy ! Component: 200 - total flux cleaned = 0.0258573 Jy ! Total flux subtracted in 200 components = 0.0258573 Jy ! Clean residual min=-0.010321 max=0.015930 Jy/beam ! Clean residual mean=-0.000100 rms=0.003791 Jy/beam ! Combined flux in latest and established models = 0.091981 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 25 components and 0.091981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148690Jy sigma=0.001119 ! Fit after self-cal, rms=0.148662Jy sigma=0.001119 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.80 HN 1.04 KP 0.92 ! LA 0.82 MK 1.14 NL 0.82 OV 1.02 ! PT 0.85 SC 1.12 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 1.04 KP 0.87 ! LA 0.80 MK 1.10 NL 0.99 OV 0.99 ! PT 0.80 SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 12.84 FD 0.91 HN 1.13 KP 0.88 ! LA 0.84 MK 1.11 NL 1.10 OV 0.99 ! PT 0.88 SC 1.20 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 0.82 KP 1.00* ! LA 0.77 MK 1.03 NL 1.00* OV 1.00* ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.148662Jy sigma=0.001119 ! Fit after self-cal, rms=1.014654Jy sigma=0.000679 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.524 mas, bmaj=9.789 mas, bpa=-13.68 degrees ! Estimated noise=1065.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775534 Jy ! Component: 100 - total flux cleaned = 0.0116404 Jy ! Component: 150 - total flux cleaned = 0.0129847 Jy ! Component: 200 - total flux cleaned = 0.0140864 Jy ! Total flux subtracted in 200 components = 0.0140864 Jy ! Clean residual min=-0.004087 max=0.004862 Jy/beam ! Clean residual mean=0.000034 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.106067 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 49 components and 0.106067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.014314Jy sigma=0.000675 ! Fit after self-cal, rms=1.014824Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.014824Jy sigma=0.000665 ! Fit after self-cal, rms=1.469711Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=9.774 mas, bpa=-14.46 degrees ! Estimated noise=1053.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442337 Jy ! Component: 100 - total flux cleaned = 0.00625383 Jy ! Component: 150 - total flux cleaned = 0.00709697 Jy ! Component: 200 - total flux cleaned = 0.00778587 Jy ! Total flux subtracted in 200 components = 0.00778587 Jy ! Clean residual min=-0.004056 max=0.004224 Jy/beam ! Clean residual mean=0.000026 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.113853 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 65 components and 0.113853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.469520Jy sigma=0.000662 ! Fit after self-cal, rms=1.469536Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144994 Jy ! Component: 100 - total flux cleaned = 0.00202518 Jy ! Component: 150 - total flux cleaned = 0.00224498 Jy ! Component: 200 - total flux cleaned = 0.00238715 Jy ! Total flux subtracted in 200 components = 0.00238715 Jy ! Clean residual min=-0.003880 max=0.003987 Jy/beam ! Clean residual mean=0.000030 rms=0.000983 Jy/beam ! Combined flux in latest and established models = 0.11624 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 71 components and 0.11624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.469444Jy sigma=0.000661 ! Fit after self-cal, rms=1.469551Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.469551Jy sigma=0.000661 ! Fit after self-cal, rms=0.851691Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.459 mas, bmaj=9.641 mas, bpa=-14.57 degrees ! Estimated noise=1047.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230847 Jy ! Component: 100 - total flux cleaned = 0.00306441 Jy ! Component: 150 - total flux cleaned = 0.00329901 Jy ! Component: 200 - total flux cleaned = 0.00342513 Jy ! Total flux subtracted in 200 components = 0.00342513 Jy ! Clean residual min=-0.003943 max=0.003604 Jy/beam ! Clean residual mean=0.000025 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.119666 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 79 components and 0.119666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.851567Jy sigma=0.000659 ! Fit after self-cal, rms=0.851502Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00046833 Jy ! Component: 100 - total flux cleaned = 0.000694813 Jy ! Component: 150 - total flux cleaned = 0.000736609 Jy ! Component: 200 - total flux cleaned = 0.000811752 Jy ! Total flux subtracted in 200 components = 0.000811752 Jy ! Clean residual min=-0.004018 max=0.003619 Jy/beam ! Clean residual mean=0.000026 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.120477 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.120477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.851426Jy sigma=0.000659 ! Fit after self-cal, rms=0.851409Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.851409Jy sigma=0.000659 ! Fit after self-cal, rms=0.872384Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.505 mas, bmaj=25.06 mas, bpa=-6.024 degrees ! Estimated noise=1190.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219628 Jy ! Component: 100 - total flux cleaned = 0.00273292 Jy ! Component: 150 - total flux cleaned = 0.00294141 Jy ! Component: 200 - total flux cleaned = 0.00304965 Jy ! Total flux subtracted in 200 components = 0.00304965 Jy ! Clean residual min=-0.004409 max=0.004845 Jy/beam ! Clean residual mean=0.000043 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.123527 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.123527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.872282Jy sigma=0.000659 ! Fit after self-cal, rms=0.872261Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000234763 Jy ! Component: 100 - total flux cleaned = 0.000272704 Jy ! Component: 150 - total flux cleaned = 0.000272072 Jy ! Component: 200 - total flux cleaned = 0.000242516 Jy ! Total flux subtracted in 200 components = 0.000242516 Jy ! Clean residual min=-0.004356 max=0.004844 Jy/beam ! Clean residual mean=0.000044 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.123769 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 105 components and 0.123769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.872239Jy sigma=0.000658 ! Fit after self-cal, rms=0.872236Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=9.571 mas, bpa=-14.63 degrees ! Estimated noise=1053.36 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 9.571 at -14.63 degrees (North through East) ! Clean map min=-0.0082857 max=0.06847 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.658 mas, bmaj=7.419 mas, bpa=-14.19 degrees ! Estimated noise=1668.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0572529 Jy ! Component: 100 - total flux cleaned = 0.0774932 Jy ! Component: 150 - total flux cleaned = 0.0904389 Jy ! Component: 200 - total flux cleaned = 0.097082 Jy ! Total flux subtracted in 200 components = 0.097082 Jy ! Clean residual min=-0.005848 max=0.006312 Jy/beam ! Clean residual mean=-0.000025 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.097082 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.097082 Jy ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=9.571 mas, bpa=-14.63 degrees ! Estimated noise=1053.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911988 Jy ! Component: 100 - total flux cleaned = 0.0151365 Jy ! Component: 150 - total flux cleaned = 0.0181489 Jy ! Component: 200 - total flux cleaned = 0.0198328 Jy ! Total flux subtracted in 200 components = 0.0198328 Jy ! Clean residual min=-0.004237 max=0.003464 Jy/beam ! Clean residual mean=0.000008 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.116915 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 56 components and 0.116915 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.505 mas, bmaj=25.06 mas, bpa=-6.024 degrees ! Estimated noise=1190.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356417 Jy ! Component: 100 - total flux cleaned = 0.00426328 Jy ! Component: 150 - total flux cleaned = 0.00482803 Jy ! Component: 200 - total flux cleaned = 0.00528743 Jy ! Total flux subtracted in 200 components = 0.00528743 Jy ! Clean residual min=-0.004241 max=0.004611 Jy/beam ! Clean residual mean=0.000038 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.122202 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000112112 Jy ! Component: 100 - total flux cleaned = 0.00021217 Jy ! Component: 150 - total flux cleaned = 0.000299307 Jy ! Component: 200 - total flux cleaned = 0.000378544 Jy ! Total flux subtracted in 200 components = 0.000378544 Jy ! Clean residual min=-0.003917 max=0.004651 Jy/beam ! Clean residual mean=0.000038 rms=0.001194 Jy/beam ! Combined flux in latest and established models = 0.122581 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 142 components and 0.122581 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.426 mas, bmaj=9.571 mas, bpa=-14.63 degrees ! Estimated noise=1053.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193109 Jy ! Component: 100 - total flux cleaned = 7.42807e-05 Jy ! Component: 150 - total flux cleaned = 7.42347e-05 Jy ! Component: 200 - total flux cleaned = 7.40123e-05 Jy ! Total flux subtracted in 200 components = 7.40123e-05 Jy ! Clean residual min=-0.003909 max=0.003637 Jy/beam ! Clean residual mean=0.000022 rms=0.000857 Jy/beam ! Combined flux in latest and established models = 0.122655 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 0.122655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.872139Jy sigma=0.000658 ! Fit after self-cal, rms=0.872173Jy sigma=0.000658 wmodel J0441-2952_S_2017_05_27_pus_map.mod ! Writing 156 model components to file: J0441-2952_S_2017_05_27_pus_map.mod wobs J0441-2952_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0441-2952_S_2017_05_27_pus_uvs.fits wwins J0441-2952_S_2017_05_27_pus_map.win ! wwins: Wrote 3 windows to J0441-2952_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000798949 Jy ! Component: 100 - total flux cleaned = -0.00126079 Jy ! Component: 150 - total flux cleaned = -0.00136505 Jy ! Component: 200 - total flux cleaned = -0.00155376 Jy ! Component: 250 - total flux cleaned = -0.00155347 Jy ! Component: 300 - total flux cleaned = -0.00159876 Jy ! Component: 350 - total flux cleaned = -0.00164156 Jy ! Component: 400 - total flux cleaned = -0.00172379 Jy ! Component: 450 - total flux cleaned = -0.0019244 Jy ! Component: 500 - total flux cleaned = -0.0021601 Jy ! Component: 550 - total flux cleaned = -0.00242758 Jy ! Component: 600 - total flux cleaned = -0.00265179 Jy ! Component: 650 - total flux cleaned = -0.00290764 Jy ! Component: 700 - total flux cleaned = -0.00305125 Jy ! Component: 750 - total flux cleaned = -0.0033328 Jy ! Component: 800 - total flux cleaned = -0.00350511 Jy ! Component: 850 - total flux cleaned = -0.00374181 Jy ! Component: 900 - total flux cleaned = -0.00387509 Jy ! Component: 950 - total flux cleaned = -0.00403858 Jy ! Component: 1000 - total flux cleaned = -0.00423141 Jy ! Component: 1050 - total flux cleaned = -0.00435815 Jy ! Component: 1100 - total flux cleaned = -0.00457582 Jy ! Component: 1150 - total flux cleaned = -0.00472875 Jy ! Component: 1200 - total flux cleaned = -0.00493945 Jy ! Component: 1250 - total flux cleaned = -0.00511714 Jy ! Component: 1300 - total flux cleaned = -0.00526233 Jy ! Component: 1350 - total flux cleaned = -0.00543455 Jy ! Component: 1400 - total flux cleaned = -0.00549089 Jy ! Component: 1450 - total flux cleaned = -0.00554747 Jy ! Component: 1500 - total flux cleaned = -0.00574103 Jy ! Component: 1550 - total flux cleaned = -0.00576829 Jy ! Component: 1600 - total flux cleaned = -0.00587639 Jy ! Component: 1650 - total flux cleaned = -0.00595613 Jy ! Component: 1700 - total flux cleaned = -0.00603547 Jy ! Component: 1750 - total flux cleaned = -0.00613959 Jy ! Component: 1800 - total flux cleaned = -0.00626867 Jy ! Component: 1850 - total flux cleaned = -0.00647266 Jy ! Component: 1900 - total flux cleaned = -0.0066237 Jy ! Component: 1950 - total flux cleaned = -0.00677329 Jy ! Component: 2000 - total flux cleaned = -0.00697059 Jy ! Component: 2050 - total flux cleaned = -0.00709245 Jy ! Component: 2100 - total flux cleaned = -0.00718935 Jy ! Component: 2150 - total flux cleaned = -0.00733318 Jy ! Component: 2200 - total flux cleaned = -0.00742836 Jy ! Component: 2250 - total flux cleaned = -0.00754586 Jy ! Component: 2300 - total flux cleaned = -0.00761571 Jy ! Component: 2350 - total flux cleaned = -0.00773103 Jy ! Component: 2400 - total flux cleaned = -0.00775407 Jy ! Component: 2450 - total flux cleaned = -0.00786731 Jy ! Component: 2500 - total flux cleaned = -0.0078673 Jy ! Component: 2550 - total flux cleaned = -0.00793431 Jy ! Component: 2600 - total flux cleaned = -0.00802278 Jy ! Component: 2650 - total flux cleaned = -0.00811033 Jy ! Component: 2700 - total flux cleaned = -0.00821877 Jy ! Component: 2750 - total flux cleaned = -0.00821873 Jy ! Component: 2800 - total flux cleaned = -0.00828267 Jy ! Component: 2850 - total flux cleaned = -0.00834594 Jy ! Component: 2900 - total flux cleaned = -0.00838801 Jy ! Component: 2950 - total flux cleaned = -0.0084297 Jy ! Component: 3000 - total flux cleaned = -0.00845047 Jy ! Component: 3050 - total flux cleaned = -0.00853226 Jy ! Component: 3100 - total flux cleaned = -0.00859293 Jy ! Component: 3150 - total flux cleaned = -0.00857279 Jy ! Component: 3200 - total flux cleaned = -0.00861286 Jy ! Component: 3250 - total flux cleaned = -0.0087315 Jy ! Component: 3300 - total flux cleaned = -0.00875112 Jy ! Component: 3350 - total flux cleaned = -0.0088095 Jy ! Component: 3400 - total flux cleaned = -0.00882869 Jy ! Component: 3450 - total flux cleaned = -0.00890499 Jy ! Component: 3500 - total flux cleaned = -0.00892371 Jy ! Component: 3550 - total flux cleaned = -0.0089236 Jy ! Component: 3600 - total flux cleaned = -0.0089423 Jy ! Component: 3650 - total flux cleaned = -0.00896097 Jy ! Component: 3700 - total flux cleaned = -0.00899786 Jy ! Component: 3750 - total flux cleaned = -0.00907105 Jy ! Component: 3800 - total flux cleaned = -0.00916178 Jy ! Component: 3850 - total flux cleaned = -0.00917984 Jy ! Component: 3900 - total flux cleaned = -0.00919797 Jy ! Component: 3950 - total flux cleaned = -0.00926926 Jy ! Component: 4000 - total flux cleaned = -0.00928677 Jy ! Component: 4050 - total flux cleaned = -0.00935697 Jy ! Total flux subtracted in 4096 components = -0.00940935 Jy ! Clean residual min=-0.000977 max=0.001345 Jy/beam ! Clean residual mean=0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.113245 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 426 components and 0.113245 Jy ![Exited script file: muppet] wmap "J0441-2952_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 9.571 at -14.63 degrees (North through East) ! Clean map min=-0.0080316 max=0.071653 Jy/beam ! Writing clean map to FITS file: J0441-2952_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0716529 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000326366 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.36645 1.36645 2.73289 5.46579 10.9316 21.8631 43.7263 87.4526 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.426 x 9.571 at -14.63 degrees (North through East) ! Clean map min=-0.0080316 max=0.071653 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0441-2952_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:56:56 2019