! Started logfile: J0439-3017_S_2017_07_09_pus_uvs.log on Wed May 8 14:42:11 2019 obs J0439-3017_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0439-3017_S_2017_07_09_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.778009 visibilities/baseline/integration-bin. ! Found source: J0439-3017 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0439-3017_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 149 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 204 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 620 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.857240Jy sigma=0.006132 ! Fit after self-cal, rms=0.833727Jy sigma=0.005965 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.502 mas, bmaj=6.466 mas, bpa=-8.262 degrees ! Estimated noise=2032.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.128831 Jy ! Component: 100 - total flux cleaned = 0.16054 Jy ! Total flux subtracted in 100 components = 0.16054 Jy ! Clean residual min=-0.009208 max=0.014300 Jy/beam ! Clean residual mean=0.000004 rms=0.002443 Jy/beam ! Combined flux in latest and established models = 0.16054 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.16054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103491Jy sigma=0.000705 ! Fit after self-cal, rms=0.103455Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=7.695 mas, bpa=-7.937 degrees ! Estimated noise=1035.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179206 Jy ! Component: 100 - total flux cleaned = 0.0257369 Jy ! Component: 150 - total flux cleaned = 0.0294586 Jy ! Component: 200 - total flux cleaned = 0.0312769 Jy ! Total flux subtracted in 200 components = 0.0312769 Jy ! Clean residual min=-0.004859 max=0.006743 Jy/beam ! Clean residual mean=-0.000003 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.191817 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 36 components and 0.191817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100997Jy sigma=0.000682 ! Fit after self-cal, rms=0.100987Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.95 HN 1.00* KP 0.99 ! LA 1.00 MK 0.97 NL 0.95 OV 1.01 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 0.97 ! LA 0.96 MK 0.97 NL 1.13 OV 1.03 ! PT 0.93 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 1.00 HN 1.00* KP 0.97 ! LA 0.96 MK 1.02 NL 1.09 OV 0.97 ! PT 0.95 SC 1.00 ! ! ! Correcting IF 4. ! A total of 108 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.00* ! LA 0.91 MK 1.23 NL 1.00* OV 1.00* ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.100987Jy sigma=0.000682 ! Fit after self-cal, rms=0.105510Jy sigma=0.000677 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.029 mas, bmaj=7.689 mas, bpa=-7.859 degrees ! Estimated noise=1043.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00504673 Jy ! Component: 100 - total flux cleaned = 0.00685654 Jy ! Component: 150 - total flux cleaned = 0.00697325 Jy ! Component: 200 - total flux cleaned = 0.0070218 Jy ! Total flux subtracted in 200 components = 0.0070218 Jy ! Clean residual min=-0.003201 max=0.003891 Jy/beam ! Clean residual mean=0.000018 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.198839 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 57 components and 0.198839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105285Jy sigma=0.000675 ! Fit after self-cal, rms=0.105418Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105418Jy sigma=0.000675 ! Fit after self-cal, rms=0.106461Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.017 mas, bmaj=7.663 mas, bpa=-7.905 degrees ! Estimated noise=1044.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236389 Jy ! Component: 100 - total flux cleaned = 0.00318876 Jy ! Component: 150 - total flux cleaned = 0.00345946 Jy ! Component: 200 - total flux cleaned = 0.00364517 Jy ! Total flux subtracted in 200 components = 0.00364517 Jy ! Clean residual min=-0.002588 max=0.002900 Jy/beam ! Clean residual mean=0.000016 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.202484 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.202484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106396Jy sigma=0.000672 ! Fit after self-cal, rms=0.106414Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940555 Jy ! Component: 100 - total flux cleaned = 0.00103608 Jy ! Component: 150 - total flux cleaned = 0.00103517 Jy ! Component: 200 - total flux cleaned = 0.00101253 Jy ! Total flux subtracted in 200 components = 0.00101253 Jy ! Clean residual min=-0.002601 max=0.002897 Jy/beam ! Clean residual mean=0.000017 rms=0.000711 Jy/beam ! Combined flux in latest and established models = 0.203497 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 93 components and 0.203497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106395Jy sigma=0.000672 ! Fit after self-cal, rms=0.106393Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106393Jy sigma=0.000672 ! Fit after self-cal, rms=0.106630Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.014 mas, bmaj=7.645 mas, bpa=-7.992 degrees ! Estimated noise=1044.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000872475 Jy ! Component: 100 - total flux cleaned = 0.00104677 Jy ! Component: 150 - total flux cleaned = 0.00100097 Jy ! Component: 200 - total flux cleaned = 0.000959171 Jy ! Total flux subtracted in 200 components = 0.000959171 Jy ! Clean residual min=-0.002379 max=0.002369 Jy/beam ! Clean residual mean=0.000013 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.204456 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 106 components and 0.204456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106610Jy sigma=0.000670 ! Fit after self-cal, rms=0.106615Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271206 Jy ! Component: 100 - total flux cleaned = 0.000252565 Jy ! Component: 150 - total flux cleaned = 0.000252997 Jy ! Component: 200 - total flux cleaned = 0.000252677 Jy ! Total flux subtracted in 200 components = 0.000252677 Jy ! Clean residual min=-0.002399 max=0.002340 Jy/beam ! Clean residual mean=0.000013 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.204708 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 110 components and 0.204708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106607Jy sigma=0.000670 ! Fit after self-cal, rms=0.106608Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106608Jy sigma=0.000670 ! Fit after self-cal, rms=0.106589Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.935 mas, bmaj=22.6 mas, bpa=-5.182 degrees ! Estimated noise=1364.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000675643 Jy ! Component: 100 - total flux cleaned = 0.000677296 Jy ! Component: 150 - total flux cleaned = 0.00063715 Jy ! Component: 200 - total flux cleaned = 0.000604962 Jy ! Total flux subtracted in 200 components = 0.000604962 Jy ! Clean residual min=-0.002479 max=0.002641 Jy/beam ! Clean residual mean=0.000026 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 0.205313 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 115 components and 0.205313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106582Jy sigma=0.000670 ! Fit after self-cal, rms=0.106576Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000148813 Jy ! Component: 100 - total flux cleaned = 0.000170778 Jy ! Component: 150 - total flux cleaned = 0.000171178 Jy ! Component: 200 - total flux cleaned = 0.000158707 Jy ! Total flux subtracted in 200 components = 0.000158707 Jy ! Clean residual min=-0.002462 max=0.002665 Jy/beam ! Clean residual mean=0.000026 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.205472 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 0.205472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106574Jy sigma=0.000670 ! Fit after self-cal, rms=0.106574Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.639 mas, bpa=-7.986 degrees ! Estimated noise=1044.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 7.639 at -7.986 degrees (North through East) ! Clean map min=-0.0033135 max=0.16786 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=6.459 mas, bpa=-8.13 degrees ! Estimated noise=2068.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.130125 Jy ! Component: 100 - total flux cleaned = 0.162778 Jy ! Component: 150 - total flux cleaned = 0.176749 Jy ! Component: 200 - total flux cleaned = 0.185714 Jy ! Total flux subtracted in 200 components = 0.185714 Jy ! Clean residual min=-0.006642 max=0.006608 Jy/beam ! Clean residual mean=0.000001 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 0.185714 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.185714 Jy ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.639 mas, bpa=-7.986 degrees ! Estimated noise=1044.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.008065 Jy ! Component: 100 - total flux cleaned = 0.0126629 Jy ! Component: 150 - total flux cleaned = 0.0155693 Jy ! Component: 200 - total flux cleaned = 0.0174973 Jy ! Total flux subtracted in 200 components = 0.0174973 Jy ! Clean residual min=-0.002402 max=0.002322 Jy/beam ! Clean residual mean=0.000012 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.203212 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 93 components and 0.203212 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.935 mas, bmaj=22.6 mas, bpa=-5.182 degrees ! Estimated noise=1364.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192398 Jy ! Component: 100 - total flux cleaned = 0.00224702 Jy ! Component: 150 - total flux cleaned = 0.00242067 Jy ! Component: 200 - total flux cleaned = 0.00255655 Jy ! Total flux subtracted in 200 components = 0.00255655 Jy ! Clean residual min=-0.002586 max=0.002683 Jy/beam ! Clean residual mean=0.000028 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.205768 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.73524e-06 Jy ! Component: 100 - total flux cleaned = 3.05116e-06 Jy ! Component: 150 - total flux cleaned = -1.54031e-05 Jy ! Component: 200 - total flux cleaned = -1.51776e-05 Jy ! Total flux subtracted in 200 components = -1.51776e-05 Jy ! Clean residual min=-0.002556 max=0.002695 Jy/beam ! Clean residual mean=0.000028 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.205753 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.205753 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.012 mas, bmaj=7.639 mas, bpa=-7.986 degrees ! Estimated noise=1044.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000126673 Jy ! Component: 100 - total flux cleaned = 0.000126861 Jy ! Component: 150 - total flux cleaned = 0.000127588 Jy ! Component: 200 - total flux cleaned = 0.000105408 Jy ! Total flux subtracted in 200 components = 0.000105408 Jy ! Clean residual min=-0.002466 max=0.002350 Jy/beam ! Clean residual mean=0.000014 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.205858 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 136 components and 0.205858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106553Jy sigma=0.000670 ! Fit after self-cal, rms=0.106560Jy sigma=0.000670 wmodel J0439-3017_S_2017_07_09_pus_map.mod ! Writing 136 model components to file: J0439-3017_S_2017_07_09_pus_map.mod wobs J0439-3017_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0439-3017_S_2017_07_09_pus_uvs.fits wwins J0439-3017_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0439-3017_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 4.13659e-05 Jy ! Component: 100 - total flux cleaned = 3.80256e-05 Jy ! Component: 150 - total flux cleaned = 7.55319e-05 Jy ! Component: 200 - total flux cleaned = -2.98242e-05 Jy ! Component: 250 - total flux cleaned = -6.31608e-05 Jy ! Component: 300 - total flux cleaned = -0.000159581 Jy ! Component: 350 - total flux cleaned = -0.000222169 Jy ! Component: 400 - total flux cleaned = -0.000345447 Jy ! Component: 450 - total flux cleaned = -0.000405529 Jy ! Component: 500 - total flux cleaned = -0.000435518 Jy ! Component: 550 - total flux cleaned = -0.000493412 Jy ! Component: 600 - total flux cleaned = -0.000521125 Jy ! Component: 650 - total flux cleaned = -0.000493321 Jy ! Component: 700 - total flux cleaned = -0.000493495 Jy ! Component: 750 - total flux cleaned = -0.00046748 Jy ! Component: 800 - total flux cleaned = -0.000467829 Jy ! Component: 850 - total flux cleaned = -0.00041805 Jy ! Component: 900 - total flux cleaned = -0.000393561 Jy ! Component: 950 - total flux cleaned = -0.000345242 Jy ! Component: 1000 - total flux cleaned = -0.000344816 Jy ! Component: 1050 - total flux cleaned = -0.000251523 Jy ! Component: 1100 - total flux cleaned = -0.000274444 Jy ! Component: 1150 - total flux cleaned = -0.000229317 Jy ! Component: 1200 - total flux cleaned = -0.000118592 Jy ! Component: 1250 - total flux cleaned = -5.33209e-05 Jy ! Component: 1300 - total flux cleaned = 3.27569e-05 Jy ! Component: 1350 - total flux cleaned = 9.62662e-05 Jy ! Component: 1400 - total flux cleaned = 0.000180028 Jy ! Component: 1450 - total flux cleaned = 0.000283186 Jy ! Component: 1500 - total flux cleaned = 0.000425573 Jy ! Component: 1550 - total flux cleaned = 0.000505958 Jy ! Component: 1600 - total flux cleaned = 0.000644687 Jy ! Component: 1650 - total flux cleaned = 0.000820108 Jy ! Component: 1700 - total flux cleaned = 0.000896771 Jy ! Component: 1750 - total flux cleaned = 0.00101073 Jy ! Component: 1800 - total flux cleaned = 0.00112372 Jy ! Component: 1850 - total flux cleaned = 0.00130963 Jy ! Component: 1900 - total flux cleaned = 0.00141946 Jy ! Component: 1950 - total flux cleaned = 0.00151054 Jy ! Component: 2000 - total flux cleaned = 0.00165418 Jy ! Component: 2050 - total flux cleaned = 0.00183129 Jy ! Component: 2100 - total flux cleaned = 0.00193658 Jy ! Component: 2150 - total flux cleaned = 0.00210971 Jy ! Component: 2200 - total flux cleaned = 0.00219542 Jy ! Component: 2250 - total flux cleaned = 0.00229701 Jy ! Component: 2300 - total flux cleaned = 0.00236418 Jy ! Component: 2350 - total flux cleaned = 0.00249686 Jy ! Component: 2400 - total flux cleaned = 0.00257902 Jy ! Component: 2450 - total flux cleaned = 0.00272541 Jy ! Component: 2500 - total flux cleaned = 0.00280596 Jy ! Component: 2550 - total flux cleaned = 0.00291794 Jy ! Component: 2600 - total flux cleaned = 0.00304472 Jy ! Component: 2650 - total flux cleaned = 0.00315468 Jy ! Component: 2700 - total flux cleaned = 0.0032638 Jy ! Component: 2750 - total flux cleaned = 0.00337176 Jy ! Component: 2800 - total flux cleaned = 0.00346374 Jy ! Component: 2850 - total flux cleaned = 0.00360038 Jy ! Component: 2900 - total flux cleaned = 0.00373586 Jy ! Component: 2950 - total flux cleaned = 0.00384028 Jy ! Component: 3000 - total flux cleaned = 0.00392914 Jy ! Component: 3050 - total flux cleaned = 0.0039879 Jy ! Component: 3100 - total flux cleaned = 0.00407541 Jy ! Component: 3150 - total flux cleaned = 0.0041768 Jy ! Component: 3200 - total flux cleaned = 0.0042485 Jy ! Component: 3250 - total flux cleaned = 0.00431988 Jy ! Component: 3300 - total flux cleaned = 0.0044049 Jy ! Component: 3350 - total flux cleaned = 0.00448923 Jy ! Component: 3400 - total flux cleaned = 0.00455905 Jy ! Component: 3450 - total flux cleaned = 0.00461446 Jy ! Component: 3500 - total flux cleaned = 0.00468323 Jy ! Component: 3550 - total flux cleaned = 0.00475162 Jy ! Component: 3600 - total flux cleaned = 0.0048467 Jy ! Component: 3650 - total flux cleaned = 0.00487368 Jy ! Component: 3700 - total flux cleaned = 0.00494068 Jy ! Component: 3750 - total flux cleaned = 0.00503379 Jy ! Component: 3800 - total flux cleaned = 0.00506028 Jy ! Component: 3850 - total flux cleaned = 0.0050866 Jy ! Component: 3900 - total flux cleaned = 0.00517805 Jy ! Component: 3950 - total flux cleaned = 0.00524305 Jy ! Component: 4000 - total flux cleaned = 0.00528188 Jy ! Component: 4050 - total flux cleaned = 0.00532044 Jy ! Total flux subtracted in 4096 components = 0.00537138 Jy ! Clean residual min=-0.000850 max=0.000738 Jy/beam ! Clean residual mean=-0.000001 rms=0.000231 Jy/beam ! Combined flux in latest and established models = 0.21123 Jy keep ! Adding 272 model components to the UV plane model. ! The established model now contains 408 components and 0.21123 Jy ![Exited script file: muppet] wmap "J0439-3017_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 7.639 at -7.986 degrees (North through East) ! Clean map min=-0.0017093 max=0.1672 Jy/beam ! Writing clean map to FITS file: J0439-3017_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.167203 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000229273 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.411368 0.411368 0.822736 1.64547 3.29094 6.58189 13.1638 26.3275 52.6551 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.167 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.012 x 7.639 at -7.986 degrees (North through East) ! Clean map min=-0.0017093 max=0.1672 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0439-3017_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:42:16 2019