! Started logfile: J0438-2012_S_2017_05_01_pus_uvs.log on Wed May 1 18:27:19 2019 obs J0438-2012_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0438-2012_S_2017_05_01_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974713 visibilities/baseline/integration-bin. ! Found source: J0438-2012 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 20352 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0438-2012_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 17 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 536 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.938108Jy sigma=0.033433 ! Fit after self-cal, rms=0.903681Jy sigma=0.033354 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=8.594 mas, bpa=-1.101 degrees ! Estimated noise=1004.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0549233 Jy ! Component: 100 - total flux cleaned = 0.0816694 Jy ! Total flux subtracted in 100 components = 0.0816694 Jy ! Clean residual min=-0.019151 max=0.024443 Jy/beam ! Clean residual mean=-0.000019 rms=0.005637 Jy/beam ! Combined flux in latest and established models = 0.0816694 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0816694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163034Jy sigma=0.002003 ! Fit after self-cal, rms=0.162854Jy sigma=0.001948 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.745 mas, bmaj=10.15 mas, bpa=0.9806 degrees ! Estimated noise=564.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243829 Jy ! Component: 100 - total flux cleaned = 0.0402048 Jy ! Component: 150 - total flux cleaned = 0.0512176 Jy ! Component: 200 - total flux cleaned = 0.0583774 Jy ! Total flux subtracted in 200 components = 0.0583774 Jy ! Clean residual min=-0.023206 max=0.026025 Jy/beam ! Clean residual mean=-0.000070 rms=0.008639 Jy/beam ! Combined flux in latest and established models = 0.140047 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 22 components and 0.140047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155230Jy sigma=0.002215 ! Fit after self-cal, rms=0.154780Jy sigma=0.002214 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 0.72 HN 1.45 KP 0.80 ! LA 0.77 MK 1.68 NL 0.94 OV 0.96 ! PT 0.77 SC 1.43 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 0.77 HN 1.53 KP 0.78 ! LA 0.74 MK 1.63 NL 0.99 OV 0.96 ! PT 0.75 SC 1.57 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.79 HN 1.50 KP 0.77 ! LA 0.77 MK 2.15 NL 0.98 OV 0.90 ! PT 0.75 SC 1.48 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 20.27 FD 0.98 HN 1.49 KP 1.00* ! LA 0.82 MK 1.29 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.154780Jy sigma=0.002214 ! Fit after self-cal, rms=0.446894Jy sigma=0.000716 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.124 mas, bmaj=10.52 mas, bpa=2.873 degrees ! Estimated noise=763.342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316896 Jy ! Component: 100 - total flux cleaned = 0.00456946 Jy ! Component: 150 - total flux cleaned = 0.00475133 Jy ! Component: 200 - total flux cleaned = 0.00491508 Jy ! Total flux subtracted in 200 components = 0.00491508 Jy ! Clean residual min=-0.005053 max=0.006085 Jy/beam ! Clean residual mean=-0.000021 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.144962 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.144962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446178Jy sigma=0.000710 ! Fit after self-cal, rms=0.446203Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446203Jy sigma=0.000696 ! Fit after self-cal, rms=0.757601Jy sigma=0.000688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.08 mas, bmaj=10.47 mas, bpa=2.095 degrees ! Estimated noise=732.062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164402 Jy ! Component: 100 - total flux cleaned = 0.0023732 Jy ! Component: 150 - total flux cleaned = 0.00260577 Jy ! Component: 200 - total flux cleaned = 0.00271471 Jy ! Total flux subtracted in 200 components = 0.00271471 Jy ! Clean residual min=-0.003939 max=0.004736 Jy/beam ! Clean residual mean=-0.000007 rms=0.001081 Jy/beam ! Combined flux in latest and established models = 0.147677 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 59 components and 0.147677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.757261Jy sigma=0.000685 ! Fit after self-cal, rms=0.757597Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52.5, 77.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341106 Jy ! Component: 100 - total flux cleaned = 0.00373918 Jy ! Component: 150 - total flux cleaned = 0.00403968 Jy ! Component: 200 - total flux cleaned = 0.00431313 Jy ! Total flux subtracted in 200 components = 0.00431313 Jy ! Clean residual min=-0.003668 max=0.003784 Jy/beam ! Clean residual mean=0.000000 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.15199 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.15199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.757349Jy sigma=0.000682 ! Fit after self-cal, rms=0.757295Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.757295Jy sigma=0.000682 ! Fit after self-cal, rms=0.137547Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4 mas, bmaj=10.05 mas, bpa=0.5942 degrees ! Estimated noise=703.075 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201789 Jy ! Component: 100 - total flux cleaned = 0.00271765 Jy ! Component: 150 - total flux cleaned = 0.00301905 Jy ! Component: 200 - total flux cleaned = 0.00335455 Jy ! Total flux subtracted in 200 components = 0.00335455 Jy ! Clean residual min=-0.003018 max=0.003101 Jy/beam ! Clean residual mean=-0.000001 rms=0.000801 Jy/beam ! Combined flux in latest and established models = 0.155344 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 107 components and 0.155344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137415Jy sigma=0.000678 ! Fit after self-cal, rms=0.137150Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834661 Jy ! Component: 100 - total flux cleaned = 0.00118225 Jy ! Component: 150 - total flux cleaned = 0.00136758 Jy ! Component: 200 - total flux cleaned = 0.00148113 Jy ! Total flux subtracted in 200 components = 0.00148113 Jy ! Clean residual min=-0.003119 max=0.002957 Jy/beam ! Clean residual mean=0.000002 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.156825 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 0.156825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137062Jy sigma=0.000676 ! Fit after self-cal, rms=0.137031Jy sigma=0.000676 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137031Jy sigma=0.000676 ! Fit after self-cal, rms=0.132381Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.419 mas, bmaj=18.2 mas, bpa=3.315 degrees ! Estimated noise=701.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017579 Jy ! Component: 100 - total flux cleaned = 0.00198435 Jy ! Component: 150 - total flux cleaned = 0.00212786 Jy ! Component: 200 - total flux cleaned = 0.002126 Jy ! Total flux subtracted in 200 components = 0.002126 Jy ! Clean residual min=-0.002905 max=0.003131 Jy/beam ! Clean residual mean=0.000001 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.158951 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 135 components and 0.158951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132345Jy sigma=0.000675 ! Fit after self-cal, rms=0.132255Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311299 Jy ! Component: 100 - total flux cleaned = 0.000445336 Jy ! Component: 150 - total flux cleaned = 0.000522106 Jy ! Component: 200 - total flux cleaned = 0.000520822 Jy ! Total flux subtracted in 200 components = 0.000520822 Jy ! Clean residual min=-0.002895 max=0.003037 Jy/beam ! Clean residual mean=0.000002 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.159472 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 144 components and 0.159472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132240Jy sigma=0.000675 ! Fit after self-cal, rms=0.132215Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=10.01 mas, bpa=0.0963 degrees ! Estimated noise=693.945 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.967 x 10.01 at 0.0963 degrees (North through East) ! Clean map min=-0.0041436 max=0.059638 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.106 mas, bpa=-2.33 degrees ! Estimated noise=1212.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0637894 Jy ! Component: 100 - total flux cleaned = 0.0925554 Jy ! Component: 150 - total flux cleaned = 0.110209 Jy ! Component: 200 - total flux cleaned = 0.121555 Jy ! Total flux subtracted in 200 components = 0.121555 Jy ! Clean residual min=-0.004952 max=0.007307 Jy/beam ! Clean residual mean=-0.000017 rms=0.001361 Jy/beam ! Combined flux in latest and established models = 0.121555 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.121555 Jy ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=10.01 mas, bpa=0.0963 degrees ! Estimated noise=693.945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101809 Jy ! Component: 100 - total flux cleaned = 0.0169954 Jy ! Component: 150 - total flux cleaned = 0.0220062 Jy ! Component: 200 - total flux cleaned = 0.0259026 Jy ! Total flux subtracted in 200 components = 0.0259026 Jy ! Clean residual min=-0.003354 max=0.003370 Jy/beam ! Clean residual mean=-0.000008 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.147457 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 69 components and 0.147457 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.419 mas, bmaj=18.2 mas, bpa=3.315 degrees ! Estimated noise=701.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373912 Jy ! Component: 100 - total flux cleaned = 0.00628228 Jy ! Component: 150 - total flux cleaned = 0.00756997 Jy ! Component: 200 - total flux cleaned = 0.00800796 Jy ! Total flux subtracted in 200 components = 0.00800796 Jy ! Clean residual min=-0.002819 max=0.003324 Jy/beam ! Clean residual mean=-0.000001 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.155465 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332723 Jy ! Component: 100 - total flux cleaned = 0.000632244 Jy ! Component: 150 - total flux cleaned = 0.000943303 Jy ! Component: 200 - total flux cleaned = 0.0011825 Jy ! Total flux subtracted in 200 components = 0.0011825 Jy ! Clean residual min=-0.002722 max=0.003054 Jy/beam ! Clean residual mean=0.000001 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.156648 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 125 components and 0.156648 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.967 mas, bmaj=10.01 mas, bpa=0.0963 degrees ! Estimated noise=693.945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146348 Jy ! Component: 100 - total flux cleaned = 0.000391413 Jy ! Component: 150 - total flux cleaned = 0.000559127 Jy ! Component: 200 - total flux cleaned = 0.000713767 Jy ! Total flux subtracted in 200 components = 0.000713767 Jy ! Clean residual min=-0.002710 max=0.002597 Jy/beam ! Clean residual mean=0.000002 rms=0.000690 Jy/beam ! Combined flux in latest and established models = 0.157361 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 145 components and 0.157361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132288Jy sigma=0.000675 ! Fit after self-cal, rms=0.132221Jy sigma=0.000674 wmodel J0438-2012_S_2017_05_01_pus_map.mod ! Writing 145 model components to file: J0438-2012_S_2017_05_01_pus_map.mod wobs J0438-2012_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0438-2012_S_2017_05_01_pus_uvs.fits wwins J0438-2012_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0438-2012_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000736954 Jy ! Component: 100 - total flux cleaned = -0.00118209 Jy ! Component: 150 - total flux cleaned = -0.00147577 Jy ! Component: 200 - total flux cleaned = -0.00187566 Jy ! Component: 250 - total flux cleaned = -0.0021438 Jy ! Component: 300 - total flux cleaned = -0.00243977 Jy ! Component: 350 - total flux cleaned = -0.00258321 Jy ! Component: 400 - total flux cleaned = -0.00268761 Jy ! Component: 450 - total flux cleaned = -0.00268852 Jy ! Component: 500 - total flux cleaned = -0.00272165 Jy ! Component: 550 - total flux cleaned = -0.00268951 Jy ! Component: 600 - total flux cleaned = -0.00265866 Jy ! Component: 650 - total flux cleaned = -0.00262846 Jy ! Component: 700 - total flux cleaned = -0.00268819 Jy ! Component: 750 - total flux cleaned = -0.00265872 Jy ! Component: 800 - total flux cleaned = -0.00265951 Jy ! Component: 850 - total flux cleaned = -0.00277201 Jy ! Component: 900 - total flux cleaned = -0.00282704 Jy ! Component: 950 - total flux cleaned = -0.00285384 Jy ! Component: 1000 - total flux cleaned = -0.00277305 Jy ! Component: 1050 - total flux cleaned = -0.00272065 Jy ! Component: 1100 - total flux cleaned = -0.00272019 Jy ! Component: 1150 - total flux cleaned = -0.00264352 Jy ! Component: 1200 - total flux cleaned = -0.00269412 Jy ! Component: 1250 - total flux cleaned = -0.00266977 Jy ! Component: 1300 - total flux cleaned = -0.00264504 Jy ! Component: 1350 - total flux cleaned = -0.0025488 Jy ! Component: 1400 - total flux cleaned = -0.00252515 Jy ! Component: 1450 - total flux cleaned = -0.00247859 Jy ! Component: 1500 - total flux cleaned = -0.00245552 Jy ! Component: 1550 - total flux cleaned = -0.00238637 Jy ! Component: 1600 - total flux cleaned = -0.00240882 Jy ! Component: 1650 - total flux cleaned = -0.00238607 Jy ! Component: 1700 - total flux cleaned = -0.00243056 Jy ! Component: 1750 - total flux cleaned = -0.00232022 Jy ! Component: 1800 - total flux cleaned = -0.00229891 Jy ! Component: 1850 - total flux cleaned = -0.00221228 Jy ! Component: 1900 - total flux cleaned = -0.00223366 Jy ! Component: 1950 - total flux cleaned = -0.00216965 Jy ! Component: 2000 - total flux cleaned = -0.00212765 Jy ! Component: 2050 - total flux cleaned = -0.00212759 Jy ! Component: 2100 - total flux cleaned = -0.00210691 Jy ! Component: 2150 - total flux cleaned = -0.00200421 Jy ! Component: 2200 - total flux cleaned = -0.00196376 Jy ! Component: 2250 - total flux cleaned = -0.00190333 Jy ! Component: 2300 - total flux cleaned = -0.00192315 Jy ! Component: 2350 - total flux cleaned = -0.00184383 Jy ! Component: 2400 - total flux cleaned = -0.00180462 Jy ! Component: 2450 - total flux cleaned = -0.00170745 Jy ! Component: 2500 - total flux cleaned = -0.00172678 Jy ! Component: 2550 - total flux cleaned = -0.00168851 Jy ! Component: 2600 - total flux cleaned = -0.00155554 Jy ! Component: 2650 - total flux cleaned = -0.0015368 Jy ! Component: 2700 - total flux cleaned = -0.00149932 Jy ! Component: 2750 - total flux cleaned = -0.00148067 Jy ! Component: 2800 - total flux cleaned = -0.0013885 Jy ! Component: 2850 - total flux cleaned = -0.00140658 Jy ! Component: 2900 - total flux cleaned = -0.00131586 Jy ! Component: 2950 - total flux cleaned = -0.00136986 Jy ! Component: 3000 - total flux cleaned = -0.00128036 Jy ! Component: 3050 - total flux cleaned = -0.00120939 Jy ! Component: 3100 - total flux cleaned = -0.00119172 Jy ! Component: 3150 - total flux cleaned = -0.00112195 Jy ! Component: 3200 - total flux cleaned = -0.0011047 Jy ! Component: 3250 - total flux cleaned = -0.00112184 Jy ! Component: 3300 - total flux cleaned = -0.001002 Jy ! Component: 3350 - total flux cleaned = -0.000951128 Jy ! Component: 3400 - total flux cleaned = -0.000917221 Jy ! Component: 3450 - total flux cleaned = -0.000799958 Jy ! Component: 3500 - total flux cleaned = -0.000849879 Jy ! Component: 3550 - total flux cleaned = -0.000767164 Jy ! Component: 3600 - total flux cleaned = -0.000734341 Jy ! Component: 3650 - total flux cleaned = -0.000669214 Jy ! Component: 3700 - total flux cleaned = -0.000620569 Jy ! Component: 3750 - total flux cleaned = -0.000572473 Jy ! Component: 3800 - total flux cleaned = -0.000572331 Jy ! Component: 3850 - total flux cleaned = -0.000572593 Jy ! Component: 3900 - total flux cleaned = -0.000604256 Jy ! Component: 3950 - total flux cleaned = -0.000557156 Jy ! Component: 4000 - total flux cleaned = -0.000541629 Jy ! Component: 4050 - total flux cleaned = -0.000479502 Jy ! Total flux subtracted in 4096 components = -0.000495134 Jy ! Clean residual min=-0.000828 max=0.000823 Jy/beam ! Clean residual mean=0.000003 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.156866 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 392 components and 0.156866 Jy ![Exited script file: muppet] wmap "J0438-2012_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.967 x 10.01 at 0.0963 degrees (North through East) ! Clean map min=-0.0020781 max=0.066078 Jy/beam ! Writing clean map to FITS file: J0438-2012_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0660779 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000275266 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24973 1.24973 2.49947 4.99893 9.99786 19.9957 39.9915 79.9829 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.967 x 10.01 at 0.0963 degrees (North through East) ! Clean map min=-0.0020781 max=0.066078 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0438-2012_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:27:25 2019