! Started logfile: J0436-2359_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:29 2019 obs J0436-2359_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0436-2359_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.512069 visibilities/baseline/integration-bin. ! Found source: J0436-2359 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 10692 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0436-2359_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 400 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 473 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 403 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1173 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.969133Jy sigma=0.007980 ! Fit after self-cal, rms=0.934630Jy sigma=0.007736 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.231 mas, bmaj=22.81 mas, bpa=-16.93 degrees ! Estimated noise=2005.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485576 Jy ! Component: 100 - total flux cleaned = 0.0641545 Jy ! Total flux subtracted in 100 components = 0.0641545 Jy ! Clean residual min=-0.007186 max=0.007468 Jy/beam ! Clean residual mean=-0.000089 rms=0.002151 Jy/beam ! Combined flux in latest and established models = 0.0641545 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0641545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092289Jy sigma=0.000693 ! Fit after self-cal, rms=0.091823Jy sigma=0.000689 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.621 mas, bmaj=26.38 mas, bpa=-16.7 degrees ! Estimated noise=1045.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121706 Jy ! Component: 100 - total flux cleaned = 0.0190983 Jy ! Component: 150 - total flux cleaned = 0.0233207 Jy ! Component: 200 - total flux cleaned = 0.0260038 Jy ! Total flux subtracted in 200 components = 0.0260038 Jy ! Clean residual min=-0.004107 max=0.004290 Jy/beam ! Clean residual mean=-0.000038 rms=0.001241 Jy/beam ! Combined flux in latest and established models = 0.0901583 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 100 components and 0.0901583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090017Jy sigma=0.000676 ! Fit after self-cal, rms=0.089961Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 0.94 HN 1.00* KP 1.12 ! LA 0.95 MK 1.02 NL 0.90 OV 1.07 ! PT 0.99 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.10 ! LA 0.97 MK 1.11 NL 1.03 OV 1.10 ! PT 0.83 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.03 HN 0.77 KP 1.00 ! LA 0.79 MK 1.06 NL 1.12 OV 0.99 ! PT 0.85 ! ! ! Correcting IF 4. ! A total of 132 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.089961Jy sigma=0.000674 ! Fit after self-cal, rms=0.086030Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.616 mas, bmaj=26.37 mas, bpa=-16.35 degrees ! Estimated noise=1045.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133866 Jy ! Component: 100 - total flux cleaned = 0.00159659 Jy ! Component: 150 - total flux cleaned = 0.00149719 Jy ! Component: 200 - total flux cleaned = 0.00136164 Jy ! Total flux subtracted in 200 components = 0.00136164 Jy ! Clean residual min=-0.003550 max=0.003226 Jy/beam ! Clean residual mean=0.000008 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.0915199 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 120 components and 0.0915199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085943Jy sigma=0.000670 ! Fit after self-cal, rms=0.085977Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085977Jy sigma=0.000669 ! Fit after self-cal, rms=0.087381Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.583 mas, bmaj=26.45 mas, bpa=-16.37 degrees ! Estimated noise=1055.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521718 Jy ! Component: 100 - total flux cleaned = 0.000628077 Jy ! Component: 150 - total flux cleaned = 0.000458814 Jy ! Component: 200 - total flux cleaned = 0.000263986 Jy ! Total flux subtracted in 200 components = 0.000263986 Jy ! Clean residual min=-0.003191 max=0.002877 Jy/beam ! Clean residual mean=0.000008 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.0917839 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 130 components and 0.0917839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087316Jy sigma=0.000667 ! Fit after self-cal, rms=0.087529Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.05544e-05 Jy ! Component: 100 - total flux cleaned = -6.76332e-05 Jy ! Component: 150 - total flux cleaned = -0.00021168 Jy ! Component: 200 - total flux cleaned = -0.000344879 Jy ! Total flux subtracted in 200 components = -0.000344879 Jy ! Clean residual min=-0.003326 max=0.002795 Jy/beam ! Clean residual mean=0.000002 rms=0.000752 Jy/beam ! Combined flux in latest and established models = 0.091439 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 134 components and 0.091439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087491Jy sigma=0.000667 ! Fit after self-cal, rms=0.087489Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087489Jy sigma=0.000667 ! Fit after self-cal, rms=0.088704Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.567 mas, bmaj=26.43 mas, bpa=-16.38 degrees ! Estimated noise=1058.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.42939e-06 Jy ! Component: 100 - total flux cleaned = -2.29734e-06 Jy ! Component: 150 - total flux cleaned = -0.000138951 Jy ! Component: 200 - total flux cleaned = -0.000296143 Jy ! Total flux subtracted in 200 components = -0.000296143 Jy ! Clean residual min=-0.003048 max=0.002721 Jy/beam ! Clean residual mean=0.000005 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0911429 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 140 components and 0.0911429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088663Jy sigma=0.000666 ! Fit after self-cal, rms=0.088787Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000258914 Jy ! Component: 100 - total flux cleaned = -0.000256771 Jy ! Component: 150 - total flux cleaned = -0.000370931 Jy ! Component: 200 - total flux cleaned = -0.000449553 Jy ! Total flux subtracted in 200 components = -0.000449553 Jy ! Clean residual min=-0.003084 max=0.002703 Jy/beam ! Clean residual mean=0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0906934 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 144 components and 0.0906934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088763Jy sigma=0.000666 ! Fit after self-cal, rms=0.088763Jy sigma=0.000666 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088763Jy sigma=0.000666 ! Fit after self-cal, rms=0.089678Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.576 mas, bmaj=31.14 mas, bpa=-8.703 degrees ! Estimated noise=1151.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.97364e-05 Jy ! Component: 100 - total flux cleaned = 0.000100182 Jy ! Component: 150 - total flux cleaned = 5.13851e-05 Jy ! Component: 200 - total flux cleaned = -1.24263e-05 Jy ! Total flux subtracted in 200 components = -1.24263e-05 Jy ! Clean residual min=-0.002564 max=0.002686 Jy/beam ! Clean residual mean=0.000008 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0906809 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 162 components and 0.0906809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089653Jy sigma=0.000666 ! Fit after self-cal, rms=0.089708Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.0381e-05 Jy ! Component: 100 - total flux cleaned = -9.96427e-05 Jy ! Component: 150 - total flux cleaned = -0.000136984 Jy ! Component: 200 - total flux cleaned = -0.000190569 Jy ! Total flux subtracted in 200 components = -0.000190569 Jy ! Clean residual min=-0.002615 max=0.002680 Jy/beam ! Clean residual mean=0.000006 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0904904 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 173 components and 0.0904903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089697Jy sigma=0.000666 ! Fit after self-cal, rms=0.089693Jy sigma=0.000666 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.549 mas, bmaj=26.38 mas, bpa=-16.39 degrees ! Estimated noise=1059.91 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.549 x 26.38 at -16.39 degrees (North through East) ! Clean map min=-0.0050889 max=0.064414 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=21.92 mas, bpa=-16.3 degrees ! Estimated noise=1971.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468699 Jy ! Component: 100 - total flux cleaned = 0.0647082 Jy ! Component: 150 - total flux cleaned = 0.0755154 Jy ! Component: 200 - total flux cleaned = 0.0824223 Jy ! Total flux subtracted in 200 components = 0.0824223 Jy ! Clean residual min=-0.005884 max=0.005093 Jy/beam ! Clean residual mean=-0.000022 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.0824223 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 63 model components to the UV plane model. ! The established model now contains 63 components and 0.0824223 Jy ! Inverting map and beam ! Estimated beam: bmin=4.549 mas, bmaj=26.38 mas, bpa=-16.39 degrees ! Estimated noise=1059.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00471361 Jy ! Component: 100 - total flux cleaned = 0.00631902 Jy ! Component: 150 - total flux cleaned = 0.00747545 Jy ! Component: 200 - total flux cleaned = 0.00808503 Jy ! Total flux subtracted in 200 components = 0.00808503 Jy ! Clean residual min=-0.003185 max=0.003008 Jy/beam ! Clean residual mean=0.000006 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.0905073 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 90 components and 0.0905073 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.576 mas, bmaj=31.14 mas, bpa=-8.703 degrees ! Estimated noise=1151.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000778059 Jy ! Component: 100 - total flux cleaned = 0.000670072 Jy ! Component: 150 - total flux cleaned = 0.000580805 Jy ! Component: 200 - total flux cleaned = 0.000504094 Jy ! Total flux subtracted in 200 components = 0.000504094 Jy ! Clean residual min=-0.002795 max=0.002595 Jy/beam ! Clean residual mean=0.000010 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0910114 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.44537e-05 Jy ! Component: 100 - total flux cleaned = -0.000125023 Jy ! Component: 150 - total flux cleaned = -0.000235593 Jy ! Component: 200 - total flux cleaned = -0.000313613 Jy ! Total flux subtracted in 200 components = -0.000313613 Jy ! Clean residual min=-0.002635 max=0.002574 Jy/beam ! Clean residual mean=0.000008 rms=0.000718 Jy/beam ! Combined flux in latest and established models = 0.0906978 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 127 components and 0.0906978 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.549 mas, bmaj=26.38 mas, bpa=-16.39 degrees ! Estimated noise=1059.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000348879 Jy ! Component: 100 - total flux cleaned = -0.000510566 Jy ! Component: 150 - total flux cleaned = -0.00058512 Jy ! Component: 200 - total flux cleaned = -0.000651238 Jy ! Total flux subtracted in 200 components = -0.000651238 Jy ! Clean residual min=-0.002914 max=0.002609 Jy/beam ! Clean residual mean=0.000003 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.0900466 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 146 components and 0.0900466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089701Jy sigma=0.000666 ! Fit after self-cal, rms=0.089721Jy sigma=0.000666 wmodel J0436-2359_S_2017_10_21_pus_map.mod ! Writing 146 model components to file: J0436-2359_S_2017_10_21_pus_map.mod wobs J0436-2359_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0436-2359_S_2017_10_21_pus_uvs.fits wwins J0436-2359_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0436-2359_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000220204 Jy ! Component: 100 - total flux cleaned = 0.000242854 Jy ! Component: 150 - total flux cleaned = 0.000825661 Jy ! Component: 200 - total flux cleaned = 0.00136274 Jy ! Component: 250 - total flux cleaned = 0.00192788 Jy ! Component: 300 - total flux cleaned = 0.00252165 Jy ! Component: 350 - total flux cleaned = 0.0029634 Jy ! Component: 400 - total flux cleaned = 0.00338373 Jy ! Component: 450 - total flux cleaned = 0.00375972 Jy ! Component: 500 - total flux cleaned = 0.00409354 Jy ! Component: 550 - total flux cleaned = 0.00439006 Jy ! Component: 600 - total flux cleaned = 0.00472075 Jy ! Component: 650 - total flux cleaned = 0.00478876 Jy ! Component: 700 - total flux cleaned = 0.00483269 Jy ! Component: 750 - total flux cleaned = 0.00485373 Jy ! Component: 800 - total flux cleaned = 0.00487442 Jy ! Component: 850 - total flux cleaned = 0.0049142 Jy ! Component: 900 - total flux cleaned = 0.00501125 Jy ! Component: 950 - total flux cleaned = 0.00508711 Jy ! Component: 1000 - total flux cleaned = 0.00521604 Jy ! Component: 1050 - total flux cleaned = 0.00530574 Jy ! Component: 1100 - total flux cleaned = 0.0053759 Jy ! Component: 1150 - total flux cleaned = 0.00546182 Jy ! Component: 1200 - total flux cleaned = 0.00556242 Jy ! Component: 1250 - total flux cleaned = 0.00566094 Jy ! Component: 1300 - total flux cleaned = 0.00574169 Jy ! Component: 1350 - total flux cleaned = 0.00577369 Jy ! Component: 1400 - total flux cleaned = 0.00585207 Jy ! Component: 1450 - total flux cleaned = 0.00589823 Jy ! Component: 1500 - total flux cleaned = 0.00592867 Jy ! Component: 1550 - total flux cleaned = 0.00595869 Jy ! Component: 1600 - total flux cleaned = 0.00600321 Jy ! Component: 1650 - total flux cleaned = 0.00600305 Jy ! Component: 1700 - total flux cleaned = 0.00604655 Jy ! Component: 1750 - total flux cleaned = 0.00604639 Jy ! Component: 1800 - total flux cleaned = 0.00607478 Jy ! Component: 1850 - total flux cleaned = 0.00603243 Jy ! Component: 1900 - total flux cleaned = 0.00606051 Jy ! Component: 1950 - total flux cleaned = 0.0060744 Jy ! Component: 2000 - total flux cleaned = 0.00607442 Jy ! Component: 2050 - total flux cleaned = 0.00610169 Jy ! Component: 2100 - total flux cleaned = 0.00612878 Jy ! Component: 2150 - total flux cleaned = 0.00611528 Jy ! Component: 2200 - total flux cleaned = 0.00614215 Jy ! Component: 2250 - total flux cleaned = 0.00615546 Jy ! Component: 2300 - total flux cleaned = 0.0061555 Jy ! Component: 2350 - total flux cleaned = 0.00616871 Jy ! Component: 2400 - total flux cleaned = 0.00616872 Jy ! Component: 2450 - total flux cleaned = 0.00616863 Jy ! Component: 2500 - total flux cleaned = 0.00614217 Jy ! Component: 2550 - total flux cleaned = 0.00614222 Jy ! Component: 2600 - total flux cleaned = 0.00611593 Jy ! Component: 2650 - total flux cleaned = 0.00611592 Jy ! Component: 2700 - total flux cleaned = 0.00607633 Jy ! Component: 2750 - total flux cleaned = 0.00603669 Jy ! Component: 2800 - total flux cleaned = 0.00601013 Jy ! Component: 2850 - total flux cleaned = 0.00597024 Jy ! Component: 2900 - total flux cleaned = 0.00597019 Jy ! Component: 2950 - total flux cleaned = 0.00595684 Jy ! Component: 3000 - total flux cleaned = 0.00595681 Jy ! Component: 3050 - total flux cleaned = 0.00594343 Jy ! Component: 3100 - total flux cleaned = 0.00595695 Jy ! Component: 3150 - total flux cleaned = 0.00594357 Jy ! Component: 3200 - total flux cleaned = 0.00593005 Jy ! Component: 3250 - total flux cleaned = 0.00590274 Jy ! Component: 3300 - total flux cleaned = 0.00588898 Jy ! Component: 3350 - total flux cleaned = 0.00588895 Jy ! Component: 3400 - total flux cleaned = 0.00587514 Jy ! Component: 3450 - total flux cleaned = 0.00587518 Jy ! Component: 3500 - total flux cleaned = 0.00588908 Jy ! Component: 3550 - total flux cleaned = 0.00584711 Jy ! Component: 3600 - total flux cleaned = 0.00583297 Jy ! Component: 3650 - total flux cleaned = 0.00579055 Jy ! Component: 3700 - total flux cleaned = 0.00580475 Jy ! Component: 3750 - total flux cleaned = 0.00573334 Jy ! Component: 3800 - total flux cleaned = 0.00570444 Jy ! Component: 3850 - total flux cleaned = 0.00568991 Jy ! Component: 3900 - total flux cleaned = 0.00566077 Jy ! Component: 3950 - total flux cleaned = 0.00561677 Jy ! Component: 4000 - total flux cleaned = 0.00557254 Jy ! Component: 4050 - total flux cleaned = 0.00557245 Jy ! Total flux subtracted in 4096 components = 0.00554255 Jy ! Clean residual min=-0.000869 max=0.000917 Jy/beam ! Clean residual mean=-0.000004 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0955891 Jy keep ! Adding 249 model components to the UV plane model. ! The established model now contains 395 components and 0.0955891 Jy ![Exited script file: muppet] wmap "J0436-2359_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.549 x 26.38 at -16.39 degrees (North through East) ! Clean map min=-0.0043617 max=0.064001 Jy/beam ! Writing clean map to FITS file: J0436-2359_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0640006 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000272446 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27708 1.27708 2.55416 5.10832 10.2166 20.4333 40.8666 81.7332 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.549 x 26.38 at -16.39 degrees (North through East) ! Clean map min=-0.0043617 max=0.064001 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0436-2359_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:34 2019