! Started logfile: J0436-2359_S_2017_05_01_pus_uvs.log on Wed May 1 18:27:08 2019 obs J0436-2359_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0436-2359_S_2017_05_01_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.674589 visibilities/baseline/integration-bin. ! Found source: J0436-2359 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 13964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0436-2359_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 353 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 273 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 761 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998881Jy sigma=0.005835 ! Fit after self-cal, rms=0.936249Jy sigma=0.005501 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=7.447 mas, bpa=-1.504 degrees ! Estimated noise=1892.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0517119 Jy ! Component: 100 - total flux cleaned = 0.063697 Jy ! Total flux subtracted in 100 components = 0.063697 Jy ! Clean residual min=-0.006278 max=0.007736 Jy/beam ! Clean residual mean=-0.000021 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 0.063697 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.063697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143142Jy sigma=0.000659 ! Fit after self-cal, rms=0.142318Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=9.413 mas, bpa=-0.712 degrees ! Estimated noise=1245.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100187 Jy ! Component: 100 - total flux cleaned = 0.0143786 Jy ! Component: 150 - total flux cleaned = 0.0165009 Jy ! Component: 200 - total flux cleaned = 0.0169154 Jy ! Total flux subtracted in 200 components = 0.0169154 Jy ! Clean residual min=-0.004690 max=0.006995 Jy/beam ! Clean residual mean=-0.000029 rms=0.001436 Jy/beam ! Combined flux in latest and established models = 0.0806124 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 20 components and 0.0806124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141410Jy sigma=0.000649 ! Fit after self-cal, rms=0.141312Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.17 KP 1.01 ! LA 0.99 MK 0.99 NL 0.97 OV 1.15 ! PT 1.05 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.99 HN 1.21 KP 0.89 ! LA 0.91 MK 1.05 NL 0.98 OV 1.30 ! PT 0.95 SC 1.08 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 1.15 KP 0.94 ! LA 0.88 MK 0.93 NL 1.07 OV 1.19 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 0.86 KP 1.00* ! LA 0.72 MK 1.06 NL 1.00* OV 1.00* ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.141312Jy sigma=0.000648 ! Fit after self-cal, rms=0.145043Jy sigma=0.000646 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=9.381 mas, bpa=-0.9062 degrees ! Estimated noise=1289.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000807981 Jy ! Component: 100 - total flux cleaned = 0.000858043 Jy ! Component: 150 - total flux cleaned = 0.000950431 Jy ! Component: 200 - total flux cleaned = 0.000997258 Jy ! Total flux subtracted in 200 components = 0.000997258 Jy ! Clean residual min=-0.004043 max=0.005021 Jy/beam ! Clean residual mean=-0.000007 rms=0.001104 Jy/beam ! Combined flux in latest and established models = 0.0816097 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 24 components and 0.0816097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144973Jy sigma=0.000646 ! Fit after self-cal, rms=0.145239Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145239Jy sigma=0.000645 ! Fit after self-cal, rms=0.138510Jy sigma=0.000642 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=9.246 mas, bpa=-1.574 degrees ! Estimated noise=1302.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000673558 Jy ! Component: 100 - total flux cleaned = 0.000699883 Jy ! Component: 150 - total flux cleaned = 0.00069653 Jy ! Component: 200 - total flux cleaned = 0.000694335 Jy ! Total flux subtracted in 200 components = 0.000694335 Jy ! Clean residual min=-0.004118 max=0.003740 Jy/beam ! Clean residual mean=-0.000018 rms=0.000979 Jy/beam ! Combined flux in latest and established models = 0.082304 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.082304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138488Jy sigma=0.000642 ! Fit after self-cal, rms=0.138559Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.35845e-05 Jy ! Component: 100 - total flux cleaned = -4.09935e-05 Jy ! Component: 150 - total flux cleaned = -6.73614e-05 Jy ! Component: 200 - total flux cleaned = -6.77998e-05 Jy ! Total flux subtracted in 200 components = -6.77998e-05 Jy ! Clean residual min=-0.003871 max=0.003820 Jy/beam ! Clean residual mean=-0.000021 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.0822362 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0822362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138542Jy sigma=0.000642 ! Fit after self-cal, rms=0.138520Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138520Jy sigma=0.000642 ! Fit after self-cal, rms=0.137272Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.565 mas, bmaj=9.163 mas, bpa=-2.105 degrees ! Estimated noise=1300.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.86887e-05 Jy ! Component: 100 - total flux cleaned = -9.23999e-06 Jy ! Component: 150 - total flux cleaned = 1.29649e-05 Jy ! Component: 200 - total flux cleaned = 3.34452e-05 Jy ! Total flux subtracted in 200 components = 3.34452e-05 Jy ! Clean residual min=-0.003706 max=0.003752 Jy/beam ! Clean residual mean=-0.000022 rms=0.000965 Jy/beam ! Combined flux in latest and established models = 0.0822697 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.0822697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137260Jy sigma=0.000641 ! Fit after self-cal, rms=0.137268Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000131884 Jy ! Component: 100 - total flux cleaned = -0.000131813 Jy ! Component: 150 - total flux cleaned = -0.000107678 Jy ! Component: 200 - total flux cleaned = -0.000106829 Jy ! Total flux subtracted in 200 components = -0.000106829 Jy ! Clean residual min=-0.003799 max=0.003892 Jy/beam ! Clean residual mean=-0.000022 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.0821628 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0821628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137254Jy sigma=0.000641 ! Fit after self-cal, rms=0.137245Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137245Jy sigma=0.000641 ! Fit after self-cal, rms=0.136841Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.63 mas, bmaj=19.25 mas, bpa=1.062 degrees ! Estimated noise=1478.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000738116 Jy ! Component: 100 - total flux cleaned = 0.000791696 Jy ! Component: 150 - total flux cleaned = 0.000864888 Jy ! Component: 200 - total flux cleaned = 0.000909559 Jy ! Total flux subtracted in 200 components = 0.000909559 Jy ! Clean residual min=-0.004742 max=0.003337 Jy/beam ! Clean residual mean=-0.000037 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.0830724 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0830724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136849Jy sigma=0.000641 ! Fit after self-cal, rms=0.136878Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.05281e-05 Jy ! Component: 100 - total flux cleaned = 8.7447e-05 Jy ! Component: 150 - total flux cleaned = 0.000129998 Jy ! Component: 200 - total flux cleaned = 0.000188531 Jy ! Total flux subtracted in 200 components = 0.000188531 Jy ! Clean residual min=-0.004711 max=0.003214 Jy/beam ! Clean residual mean=-0.000037 rms=0.001116 Jy/beam ! Combined flux in latest and established models = 0.0832609 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 55 components and 0.0832609 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136888Jy sigma=0.000641 ! Fit after self-cal, rms=0.136887Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=9.134 mas, bpa=-2.393 degrees ! Estimated noise=1297.86 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.56 x 9.134 at -2.393 degrees (North through East) ! Clean map min=-0.0034463 max=0.06916 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.74 mas, bmaj=7.219 mas, bpa=-3.229 degrees ! Estimated noise=1976.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550615 Jy ! Component: 100 - total flux cleaned = 0.068287 Jy ! Component: 150 - total flux cleaned = 0.0741165 Jy ! Component: 200 - total flux cleaned = 0.0761364 Jy ! Total flux subtracted in 200 components = 0.0761364 Jy ! Clean residual min=-0.005729 max=0.006100 Jy/beam ! Clean residual mean=-0.000007 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.0761364 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0761364 Jy ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=9.134 mas, bpa=-2.393 degrees ! Estimated noise=1297.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, 9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048851 Jy ! Component: 100 - total flux cleaned = 0.00752934 Jy ! Component: 150 - total flux cleaned = 0.008206 Jy ! Component: 200 - total flux cleaned = 0.00863265 Jy ! Total flux subtracted in 200 components = 0.00863265 Jy ! Clean residual min=-0.003369 max=0.003471 Jy/beam ! Clean residual mean=-0.000021 rms=0.000899 Jy/beam ! Combined flux in latest and established models = 0.084769 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.084769 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.63 mas, bmaj=19.25 mas, bpa=1.062 degrees ! Estimated noise=1478.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87081e-05 Jy ! Component: 100 - total flux cleaned = 0.000179736 Jy ! Component: 150 - total flux cleaned = 0.000256227 Jy ! Component: 200 - total flux cleaned = 0.000320351 Jy ! Total flux subtracted in 200 components = 0.000320351 Jy ! Clean residual min=-0.004157 max=0.003559 Jy/beam ! Clean residual mean=-0.000037 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 0.0850894 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.15846e-07 Jy ! Component: 100 - total flux cleaned = 5.5924e-07 Jy ! Component: 150 - total flux cleaned = -3.32898e-07 Jy ! Component: 200 - total flux cleaned = -3.48042e-07 Jy ! Total flux subtracted in 200 components = -3.48042e-07 Jy ! Clean residual min=-0.004077 max=0.003528 Jy/beam ! Clean residual mean=-0.000037 rms=0.001021 Jy/beam ! Combined flux in latest and established models = 0.0850891 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 57 components and 0.0850891 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.56 mas, bmaj=9.134 mas, bpa=-2.393 degrees ! Estimated noise=1297.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.65627e-05 Jy ! Component: 100 - total flux cleaned = -8.46847e-05 Jy ! Component: 150 - total flux cleaned = -0.000184563 Jy ! Component: 200 - total flux cleaned = -0.000229088 Jy ! Total flux subtracted in 200 components = -0.000229088 Jy ! Clean residual min=-0.003174 max=0.003357 Jy/beam ! Clean residual mean=-0.000022 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.08486 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 70 components and 0.08486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136728Jy sigma=0.000640 ! Fit after self-cal, rms=0.136654Jy sigma=0.000640 wmodel J0436-2359_S_2017_05_01_pus_map.mod ! Writing 70 model components to file: J0436-2359_S_2017_05_01_pus_map.mod wobs J0436-2359_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0436-2359_S_2017_05_01_pus_uvs.fits wwins J0436-2359_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0436-2359_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00058919 Jy ! Component: 100 - total flux cleaned = -0.000949255 Jy ! Component: 150 - total flux cleaned = -0.00145152 Jy ! Component: 200 - total flux cleaned = -0.00193679 Jy ! Component: 250 - total flux cleaned = -0.00245739 Jy ! Component: 300 - total flux cleaned = -0.00291111 Jy ! Component: 350 - total flux cleaned = -0.003399 Jy ! Component: 400 - total flux cleaned = -0.00368294 Jy ! Component: 450 - total flux cleaned = -0.00400571 Jy ! Component: 500 - total flux cleaned = -0.00423086 Jy ! Component: 550 - total flux cleaned = -0.00436247 Jy ! Component: 600 - total flux cleaned = -0.00453342 Jy ! Component: 650 - total flux cleaned = -0.00444781 Jy ! Component: 700 - total flux cleaned = -0.00432426 Jy ! Component: 750 - total flux cleaned = -0.00444658 Jy ! Component: 800 - total flux cleaned = -0.0044062 Jy ! Component: 850 - total flux cleaned = -0.00440592 Jy ! Component: 900 - total flux cleaned = -0.00444421 Jy ! Component: 950 - total flux cleaned = -0.00440659 Jy ! Component: 1000 - total flux cleaned = -0.00448097 Jy ! Component: 1050 - total flux cleaned = -0.00437046 Jy ! Component: 1100 - total flux cleaned = -0.00444279 Jy ! Component: 1150 - total flux cleaned = -0.00433498 Jy ! Component: 1200 - total flux cleaned = -0.00422872 Jy ! Component: 1250 - total flux cleaned = -0.00422851 Jy ! Component: 1300 - total flux cleaned = -0.00402228 Jy ! Component: 1350 - total flux cleaned = -0.00402219 Jy ! Component: 1400 - total flux cleaned = -0.00378714 Jy ! Component: 1450 - total flux cleaned = -0.0037205 Jy ! Component: 1500 - total flux cleaned = -0.00349105 Jy ! Component: 1550 - total flux cleaned = -0.00345869 Jy ! Component: 1600 - total flux cleaned = -0.00326587 Jy ! Component: 1650 - total flux cleaned = -0.00310697 Jy ! Component: 1700 - total flux cleaned = -0.00294971 Jy ! Component: 1750 - total flux cleaned = -0.00273185 Jy ! Component: 1800 - total flux cleaned = -0.00254683 Jy ! Component: 1850 - total flux cleaned = -0.00239483 Jy ! Component: 1900 - total flux cleaned = -0.00218394 Jy ! Component: 1950 - total flux cleaned = -0.00203461 Jy ! Component: 2000 - total flux cleaned = -0.00194549 Jy ! Component: 2050 - total flux cleaned = -0.00165153 Jy ! Component: 2100 - total flux cleaned = -0.00144741 Jy ! Component: 2150 - total flux cleaned = -0.00124541 Jy ! Component: 2200 - total flux cleaned = -0.00110211 Jy ! Component: 2250 - total flux cleaned = -0.000846452 Jy ! Component: 2300 - total flux cleaned = -0.000621438 Jy ! Component: 2350 - total flux cleaned = -0.000565676 Jy ! Component: 2400 - total flux cleaned = -0.000261408 Jy ! Component: 2450 - total flux cleaned = -0.000151853 Jy ! Component: 2500 - total flux cleaned = -1.6294e-05 Jy ! Component: 2550 - total flux cleaned = 0.000199324 Jy ! Component: 2600 - total flux cleaned = 0.000332973 Jy ! Component: 2650 - total flux cleaned = 0.00049224 Jy ! Component: 2700 - total flux cleaned = 0.000650159 Jy ! Component: 2750 - total flux cleaned = 0.0008072 Jy ! Component: 2800 - total flux cleaned = 0.000937397 Jy ! Component: 2850 - total flux cleaned = 0.00114308 Jy ! Component: 2900 - total flux cleaned = 0.00121969 Jy ! Component: 2950 - total flux cleaned = 0.00142251 Jy ! Component: 3000 - total flux cleaned = 0.001498 Jy ! Component: 3050 - total flux cleaned = 0.00169776 Jy ! Component: 3100 - total flux cleaned = 0.00174753 Jy ! Component: 3150 - total flux cleaned = 0.00187061 Jy ! Component: 3200 - total flux cleaned = 0.00204152 Jy ! Component: 3250 - total flux cleaned = 0.0020658 Jy ! Component: 3300 - total flux cleaned = 0.00213833 Jy ! Component: 3350 - total flux cleaned = 0.00228178 Jy ! Component: 3400 - total flux cleaned = 0.0024245 Jy ! Component: 3450 - total flux cleaned = 0.00247166 Jy ! Component: 3500 - total flux cleaned = 0.00261264 Jy ! Component: 3550 - total flux cleaned = 0.00268276 Jy ! Component: 3600 - total flux cleaned = 0.00291443 Jy ! Component: 3650 - total flux cleaned = 0.00291436 Jy ! Component: 3700 - total flux cleaned = 0.00300596 Jy ! Component: 3750 - total flux cleaned = 0.0030741 Jy ! Component: 3800 - total flux cleaned = 0.00309673 Jy ! Component: 3850 - total flux cleaned = 0.00316424 Jy ! Component: 3900 - total flux cleaned = 0.00323153 Jy ! Component: 3950 - total flux cleaned = 0.00325371 Jy ! Component: 4000 - total flux cleaned = 0.00327571 Jy ! Component: 4050 - total flux cleaned = 0.00336381 Jy ! Total flux subtracted in 4096 components = 0.00340744 Jy ! Clean residual min=-0.001294 max=0.001385 Jy/beam ! Clean residual mean=-0.000007 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0882674 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 315 components and 0.0882674 Jy ![Exited script file: muppet] wmap "J0436-2359_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.56 x 9.134 at -2.393 degrees (North through East) ! Clean map min=-0.002816 max=0.071181 Jy/beam ! Writing clean map to FITS file: J0436-2359_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0711815 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000389235 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.64046 1.64046 3.28093 6.56185 13.1237 26.2474 52.4948 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.56 x 9.134 at -2.393 degrees (North through East) ! Clean map min=-0.002816 max=0.071181 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0436-2359_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:27:13 2019