! Started logfile: J0434-2514_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:24 2019 obs J0434-2514_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0434-2514_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.533046 visibilities/baseline/integration-bin. ! Found source: J0434-2514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 8904 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0434-2514_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 340 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 355 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 437 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1044 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.953154Jy sigma=0.007959 ! Fit after self-cal, rms=0.932382Jy sigma=0.007819 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.101 mas, bmaj=24.34 mas, bpa=-16.97 degrees ! Estimated noise=1629.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0527606 Jy ! Component: 100 - total flux cleaned = 0.0645143 Jy ! Total flux subtracted in 100 components = 0.0645143 Jy ! Clean residual min=-0.004979 max=0.007031 Jy/beam ! Clean residual mean=-0.000047 rms=0.001499 Jy/beam ! Combined flux in latest and established models = 0.0645143 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0645143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090439Jy sigma=0.000695 ! Fit after self-cal, rms=0.090300Jy sigma=0.000694 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.751 mas, bmaj=26.18 mas, bpa=-17.32 degrees ! Estimated noise=1164.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00712633 Jy ! Component: 100 - total flux cleaned = 0.0103488 Jy ! Component: 150 - total flux cleaned = 0.0124236 Jy ! Component: 200 - total flux cleaned = 0.0133448 Jy ! Total flux subtracted in 200 components = 0.0133448 Jy ! Clean residual min=-0.004505 max=0.003166 Jy/beam ! Clean residual mean=-0.000012 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 0.0778591 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 69 components and 0.0778591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089713Jy sigma=0.000690 ! Fit after self-cal, rms=0.089730Jy sigma=0.000689 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.11 FD 0.97 HN 1.00* KP 1.07 ! LA 1.01 MK 1.05 NL 0.91 OV 1.02 ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* KP 1.04 ! LA 1.00 MK 1.07 NL 0.98 OV 1.01 ! PT 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 1.09 KP 1.14 ! LA 0.77 MK 1.03 NL 1.08 OV 0.94 ! PT 0.86 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.089730Jy sigma=0.000689 ! Fit after self-cal, rms=0.088076Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=26.37 mas, bpa=-17.31 degrees ! Estimated noise=1160.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000406842 Jy ! Component: 100 - total flux cleaned = -0.000443722 Jy ! Component: 150 - total flux cleaned = -0.000513084 Jy ! Component: 200 - total flux cleaned = -0.00061059 Jy ! Total flux subtracted in 200 components = -0.00061059 Jy ! Clean residual min=-0.002908 max=0.002457 Jy/beam ! Clean residual mean=0.000008 rms=0.000684 Jy/beam ! Combined flux in latest and established models = 0.0772485 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 79 components and 0.0772485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088044Jy sigma=0.000686 ! Fit after self-cal, rms=0.088097Jy sigma=0.000686 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088097Jy sigma=0.000686 ! Fit after self-cal, rms=0.088751Jy sigma=0.000685 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.829 mas, bmaj=26.44 mas, bpa=-17.3 degrees ! Estimated noise=1164.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00050432 Jy ! Component: 100 - total flux cleaned = -0.000608487 Jy ! Component: 150 - total flux cleaned = -0.000672613 Jy ! Component: 200 - total flux cleaned = -0.00073313 Jy ! Total flux subtracted in 200 components = -0.00073313 Jy ! Clean residual min=-0.002867 max=0.002392 Jy/beam ! Clean residual mean=0.000004 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0765154 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.0765154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088727Jy sigma=0.000685 ! Fit after self-cal, rms=0.088804Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109379 Jy ! Component: 100 - total flux cleaned = -0.000237923 Jy ! Component: 150 - total flux cleaned = -0.000327997 Jy ! Component: 200 - total flux cleaned = -0.000355858 Jy ! Total flux subtracted in 200 components = -0.000355858 Jy ! Clean residual min=-0.002898 max=0.002412 Jy/beam ! Clean residual mean=0.000002 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0761595 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.0761595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088783Jy sigma=0.000684 ! Fit after self-cal, rms=0.088785Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088785Jy sigma=0.000684 ! Fit after self-cal, rms=0.088903Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.846 mas, bmaj=26.41 mas, bpa=-17.27 degrees ! Estimated noise=1162.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000577515 Jy ! Component: 100 - total flux cleaned = -0.000766149 Jy ! Component: 150 - total flux cleaned = -0.000905116 Jy ! Component: 200 - total flux cleaned = -0.000956817 Jy ! Total flux subtracted in 200 components = -0.000956817 Jy ! Clean residual min=-0.002640 max=0.002293 Jy/beam ! Clean residual mean=0.000002 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.0752027 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 89 components and 0.0752027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088883Jy sigma=0.000684 ! Fit after self-cal, rms=0.088922Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.1138e-05 Jy ! Component: 100 - total flux cleaned = -0.000171439 Jy ! Component: 150 - total flux cleaned = -0.00024648 Jy ! Component: 200 - total flux cleaned = -0.000270559 Jy ! Total flux subtracted in 200 components = -0.000270559 Jy ! Clean residual min=-0.002618 max=0.002280 Jy/beam ! Clean residual mean=0.000000 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0749322 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 91 components and 0.0749321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088908Jy sigma=0.000684 ! Fit after self-cal, rms=0.088912Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088912Jy sigma=0.000684 ! Fit after self-cal, rms=0.089032Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.197 mas, bmaj=32.92 mas, bpa=-8.509 degrees ! Estimated noise=1298.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256078 Jy ! Component: 100 - total flux cleaned = -0.000345047 Jy ! Component: 150 - total flux cleaned = -0.000400658 Jy ! Component: 200 - total flux cleaned = -0.000451947 Jy ! Total flux subtracted in 200 components = -0.000451947 Jy ! Clean residual min=-0.002685 max=0.001789 Jy/beam ! Clean residual mean=0.000002 rms=0.000588 Jy/beam ! Combined flux in latest and established models = 0.0744802 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 112 components and 0.0744802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089026Jy sigma=0.000684 ! Fit after self-cal, rms=0.089022Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.38964e-05 Jy ! Component: 100 - total flux cleaned = -8.46909e-05 Jy ! Component: 150 - total flux cleaned = -0.000145924 Jy ! Component: 200 - total flux cleaned = -0.000174362 Jy ! Total flux subtracted in 200 components = -0.000174362 Jy ! Clean residual min=-0.002708 max=0.001826 Jy/beam ! Clean residual mean=-0.000000 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0743058 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 120 components and 0.0743058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089018Jy sigma=0.000684 ! Fit after self-cal, rms=0.089016Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=26.36 mas, bpa=-17.24 degrees ! Estimated noise=1161.44 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.861 x 26.36 at -17.24 degrees (North through East) ! Clean map min=-0.0043425 max=0.070162 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=24.76 mas, bpa=-16.95 degrees ! Estimated noise=1701.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0543435 Jy ! Component: 100 - total flux cleaned = 0.0665759 Jy ! Component: 150 - total flux cleaned = 0.0716154 Jy ! Component: 200 - total flux cleaned = 0.0733014 Jy ! Total flux subtracted in 200 components = 0.0733014 Jy ! Clean residual min=-0.005460 max=0.004655 Jy/beam ! Clean residual mean=0.000001 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 0.0733014 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.0733014 Jy ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=26.36 mas, bpa=-17.24 degrees ! Estimated noise=1161.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00201315 Jy ! Component: 100 - total flux cleaned = 0.00185393 Jy ! Component: 150 - total flux cleaned = 0.00191841 Jy ! Component: 200 - total flux cleaned = 0.00174467 Jy ! Total flux subtracted in 200 components = 0.00174467 Jy ! Clean residual min=-0.003403 max=0.002527 Jy/beam ! Clean residual mean=0.000005 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0750461 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 53 components and 0.0750461 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.197 mas, bmaj=32.92 mas, bpa=-8.509 degrees ! Estimated noise=1298.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052744 Jy ! Component: 100 - total flux cleaned = 0.000418462 Jy ! Component: 150 - total flux cleaned = 0.000318823 Jy ! Component: 200 - total flux cleaned = 0.000225737 Jy ! Total flux subtracted in 200 components = 0.000225737 Jy ! Clean residual min=-0.003049 max=0.001786 Jy/beam ! Clean residual mean=0.000007 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0752718 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.66239e-05 Jy ! Component: 100 - total flux cleaned = -0.000167082 Jy ! Component: 150 - total flux cleaned = -0.000242281 Jy ! Component: 200 - total flux cleaned = -0.000313237 Jy ! Total flux subtracted in 200 components = -0.000313237 Jy ! Clean residual min=-0.002963 max=0.001796 Jy/beam ! Clean residual mean=0.000004 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0749586 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 90 components and 0.0749586 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.861 mas, bmaj=26.36 mas, bpa=-17.24 degrees ! Estimated noise=1161.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410747 Jy ! Component: 100 - total flux cleaned = -0.000689672 Jy ! Component: 150 - total flux cleaned = -0.000797907 Jy ! Component: 200 - total flux cleaned = -0.000864582 Jy ! Total flux subtracted in 200 components = -0.000864582 Jy ! Clean residual min=-0.003050 max=0.002282 Jy/beam ! Clean residual mean=-0.000000 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.074094 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 100 components and 0.074094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089044Jy sigma=0.000684 ! Fit after self-cal, rms=0.089026Jy sigma=0.000684 wmodel J0434-2514_S_2017_10_21_pus_map.mod ! Writing 100 model components to file: J0434-2514_S_2017_10_21_pus_map.mod wobs J0434-2514_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0434-2514_S_2017_10_21_pus_uvs.fits wwins J0434-2514_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0434-2514_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500269 Jy ! Component: 100 - total flux cleaned = -0.000686146 Jy ! Component: 150 - total flux cleaned = -0.00107173 Jy ! Component: 200 - total flux cleaned = -0.00126529 Jy ! Component: 250 - total flux cleaned = -0.00144714 Jy ! Component: 300 - total flux cleaned = -0.0015643 Jy ! Component: 350 - total flux cleaned = -0.00167492 Jy ! Component: 400 - total flux cleaned = -0.00175418 Jy ! Component: 450 - total flux cleaned = -0.00177843 Jy ! Component: 500 - total flux cleaned = -0.00177788 Jy ! Component: 550 - total flux cleaned = -0.0017539 Jy ! Component: 600 - total flux cleaned = -0.00168578 Jy ! Component: 650 - total flux cleaned = -0.0016202 Jy ! Component: 700 - total flux cleaned = -0.00159882 Jy ! Component: 750 - total flux cleaned = -0.00157725 Jy ! Component: 800 - total flux cleaned = -0.00149677 Jy ! Component: 850 - total flux cleaned = -0.00141857 Jy ! Component: 900 - total flux cleaned = -0.00136158 Jy ! Component: 950 - total flux cleaned = -0.00132418 Jy ! Component: 1000 - total flux cleaned = -0.00130602 Jy ! Component: 1050 - total flux cleaned = -0.00128813 Jy ! Component: 1100 - total flux cleaned = -0.00128806 Jy ! Component: 1150 - total flux cleaned = -0.00128773 Jy ! Component: 1200 - total flux cleaned = -0.00127023 Jy ! Component: 1250 - total flux cleaned = -0.00125318 Jy ! Component: 1300 - total flux cleaned = -0.0012532 Jy ! Component: 1350 - total flux cleaned = -0.00125305 Jy ! Component: 1400 - total flux cleaned = -0.00126943 Jy ! Component: 1450 - total flux cleaned = -0.00123603 Jy ! Component: 1500 - total flux cleaned = -0.00121934 Jy ! Component: 1550 - total flux cleaned = -0.00120273 Jy ! Component: 1600 - total flux cleaned = -0.00118565 Jy ! Component: 1650 - total flux cleaned = -0.00115185 Jy ! Component: 1700 - total flux cleaned = -0.00110117 Jy ! Component: 1750 - total flux cleaned = -0.00108411 Jy ! Component: 1800 - total flux cleaned = -0.00113567 Jy ! Component: 1850 - total flux cleaned = -0.0011534 Jy ! Component: 1900 - total flux cleaned = -0.00117114 Jy ! Component: 1950 - total flux cleaned = -0.00118955 Jy ! Component: 2000 - total flux cleaned = -0.0011895 Jy ! Component: 2050 - total flux cleaned = -0.00120829 Jy ! Component: 2100 - total flux cleaned = -0.00122761 Jy ! Component: 2150 - total flux cleaned = -0.0012276 Jy ! Component: 2200 - total flux cleaned = -0.00122765 Jy ! Component: 2250 - total flux cleaned = -0.00124821 Jy ! Component: 2300 - total flux cleaned = -0.00124818 Jy ! Component: 2350 - total flux cleaned = -0.00126941 Jy ! Component: 2400 - total flux cleaned = -0.0012695 Jy ! Component: 2450 - total flux cleaned = -0.00126952 Jy ! Component: 2500 - total flux cleaned = -0.00131534 Jy ! Component: 2550 - total flux cleaned = -0.00133879 Jy ! Component: 2600 - total flux cleaned = -0.00138677 Jy ! Component: 2650 - total flux cleaned = -0.00146086 Jy ! Component: 2700 - total flux cleaned = -0.00148646 Jy ! Component: 2750 - total flux cleaned = -0.00153825 Jy ! Component: 2800 - total flux cleaned = -0.00159162 Jy ! Component: 2850 - total flux cleaned = -0.0016191 Jy ! Component: 2900 - total flux cleaned = -0.0017034 Jy ! Component: 2950 - total flux cleaned = -0.00176133 Jy ! Component: 3000 - total flux cleaned = -0.00185006 Jy ! Component: 3050 - total flux cleaned = -0.0019418 Jy ! Component: 3100 - total flux cleaned = -0.00197317 Jy ! Component: 3150 - total flux cleaned = -0.00206898 Jy ! Component: 3200 - total flux cleaned = -0.00210247 Jy ! Component: 3250 - total flux cleaned = -0.00217117 Jy ! Component: 3300 - total flux cleaned = -0.00224154 Jy ! Component: 3350 - total flux cleaned = -0.00224128 Jy ! Component: 3400 - total flux cleaned = -0.0023151 Jy ! Component: 3450 - total flux cleaned = -0.00235345 Jy ! Component: 3500 - total flux cleaned = -0.00235261 Jy ! Component: 3550 - total flux cleaned = -0.00239302 Jy ! Component: 3600 - total flux cleaned = -0.00243503 Jy ! Component: 3650 - total flux cleaned = -0.00247823 Jy ! Component: 3700 - total flux cleaned = -0.00252255 Jy ! Component: 3750 - total flux cleaned = -0.00252217 Jy ! Component: 3800 - total flux cleaned = -0.00261506 Jy ! Component: 3850 - total flux cleaned = -0.00261503 Jy ! Component: 3900 - total flux cleaned = -0.00271357 Jy ! Component: 3950 - total flux cleaned = -0.00271417 Jy ! Component: 4000 - total flux cleaned = -0.00276711 Jy ! Component: 4050 - total flux cleaned = -0.00287548 Jy ! Total flux subtracted in 4096 components = -0.00287516 Jy ! Clean residual min=-0.003221 max=0.003180 Jy/beam ! Clean residual mean=-0.000021 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0712189 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 343 components and 0.0712189 Jy ![Exited script file: muppet] wmap "J0434-2514_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.861 x 26.36 at -17.24 degrees (North through East) ! Clean map min=-0.0081822 max=0.067975 Jy/beam ! Writing clean map to FITS file: J0434-2514_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0679746 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00099581 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.39492 4.39492 8.78984 17.5797 35.1594 70.3187 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.067 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.861 x 26.36 at -17.24 degrees (North through East) ! Clean map min=-0.0081822 max=0.067975 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0434-2514_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:29 2019