! Started logfile: J0434-2514_S_2017_05_01_pus_uvs.log on Wed May 1 18:27:02 2019 obs J0434-2514_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0434-2514_S_2017_05_01_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.747368 visibilities/baseline/integration-bin. ! Found source: J0434-2514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 10224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0434-2514_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 161 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 121 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 433 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.986481Jy sigma=0.005835 ! Fit after self-cal, rms=0.933925Jy sigma=0.005542 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.878 mas, bmaj=8.513 mas, bpa=2.146 degrees ! Estimated noise=1990.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551161 Jy ! Component: 100 - total flux cleaned = 0.0672644 Jy ! Total flux subtracted in 100 components = 0.0672644 Jy ! Clean residual min=-0.005546 max=0.006710 Jy/beam ! Clean residual mean=-0.000011 rms=0.001405 Jy/beam ! Combined flux in latest and established models = 0.0672644 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0672644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116447Jy sigma=0.000644 ! Fit after self-cal, rms=0.115746Jy sigma=0.000640 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.54 mas, bmaj=10.16 mas, bpa=3.142 degrees ! Estimated noise=1369.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575259 Jy ! Component: 100 - total flux cleaned = 0.00752887 Jy ! Component: 150 - total flux cleaned = 0.00831618 Jy ! Component: 200 - total flux cleaned = 0.00844549 Jy ! Total flux subtracted in 200 components = 0.00844549 Jy ! Clean residual min=-0.003690 max=0.004372 Jy/beam ! Clean residual mean=-0.000012 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.0757099 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 10 components and 0.0757099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115463Jy sigma=0.000639 ! Fit after self-cal, rms=0.115456Jy sigma=0.000639 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 1.19 KP 0.98 ! LA 1.07 MK 1.14 NL 0.86 OV 1.14 ! PT 1.14 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 1.03 KP 1.01 ! LA 0.94 MK 1.00 NL 1.00 OV 1.14 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.07 KP 1.03 ! LA 0.99 MK 0.95 NL 1.01 OV 0.97 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.81 KP 1.00* ! LA 0.79 MK 0.88 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.115456Jy sigma=0.000639 ! Fit after self-cal, rms=0.115325Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=10.09 mas, bpa=3.098 degrees ! Estimated noise=1375.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.0813e-05 Jy ! Component: 100 - total flux cleaned = 1.04498e-05 Jy ! Component: 150 - total flux cleaned = 2.55847e-05 Jy ! Component: 200 - total flux cleaned = 2.54761e-05 Jy ! Total flux subtracted in 200 components = 2.54761e-05 Jy ! Clean residual min=-0.003796 max=0.003862 Jy/beam ! Clean residual mean=-0.000011 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.0757354 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 16 components and 0.0757354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115320Jy sigma=0.000638 ! Fit after self-cal, rms=0.115297Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115297Jy sigma=0.000638 ! Fit after self-cal, rms=0.116220Jy sigma=0.000637 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.53 mas, bmaj=10.07 mas, bpa=3.211 degrees ! Estimated noise=1375.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.89114e-05 Jy ! Component: 100 - total flux cleaned = 3.31438e-05 Jy ! Component: 150 - total flux cleaned = 3.40839e-05 Jy ! Component: 200 - total flux cleaned = 3.41313e-05 Jy ! Total flux subtracted in 200 components = 3.41313e-05 Jy ! Clean residual min=-0.003130 max=0.003604 Jy/beam ! Clean residual mean=-0.000023 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.0757695 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.0757695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116215Jy sigma=0.000637 ! Fit after self-cal, rms=0.116279Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.67054e-05 Jy ! Component: 100 - total flux cleaned = -1.51598e-05 Jy ! Component: 150 - total flux cleaned = -1.48069e-05 Jy ! Component: 200 - total flux cleaned = -3.43333e-06 Jy ! Total flux subtracted in 200 components = -3.43333e-06 Jy ! Clean residual min=-0.003336 max=0.003562 Jy/beam ! Clean residual mean=-0.000021 rms=0.000849 Jy/beam ! Combined flux in latest and established models = 0.0757661 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 29 components and 0.0757661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116276Jy sigma=0.000637 ! Fit after self-cal, rms=0.116277Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116277Jy sigma=0.000637 ! Fit after self-cal, rms=0.116771Jy sigma=0.000637 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.532 mas, bmaj=10.06 mas, bpa=3.273 degrees ! Estimated noise=1373.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.3995e-05 Jy ! Component: 100 - total flux cleaned = -4.12018e-05 Jy ! Component: 150 - total flux cleaned = -2.90099e-05 Jy ! Component: 200 - total flux cleaned = -2.85778e-05 Jy ! Total flux subtracted in 200 components = -2.85778e-05 Jy ! Clean residual min=-0.003165 max=0.003617 Jy/beam ! Clean residual mean=-0.000025 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.0757375 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.0757375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116767Jy sigma=0.000637 ! Fit after self-cal, rms=0.116803Jy sigma=0.000637 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15.5, -53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251863 Jy ! Component: 100 - total flux cleaned = 0.00225489 Jy ! Component: 150 - total flux cleaned = 0.00220179 Jy ! Component: 200 - total flux cleaned = 0.00216182 Jy ! Total flux subtracted in 200 components = 0.00216182 Jy ! Clean residual min=-0.003275 max=0.003270 Jy/beam ! Clean residual mean=-0.000019 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.0778994 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.0778994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116709Jy sigma=0.000636 ! Fit after self-cal, rms=0.116700Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116700Jy sigma=0.000636 ! Fit after self-cal, rms=0.116402Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.256 mas, bmaj=19.93 mas, bpa=3.862 degrees ! Estimated noise=1619.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052145 Jy ! Component: 100 - total flux cleaned = 0.000256725 Jy ! Component: 150 - total flux cleaned = -2.81153e-05 Jy ! Component: 200 - total flux cleaned = -0.000268692 Jy ! Total flux subtracted in 200 components = -0.000268692 Jy ! Clean residual min=-0.003581 max=0.003116 Jy/beam ! Clean residual mean=-0.000038 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.0776307 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 55 components and 0.0776307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116377Jy sigma=0.000636 ! Fit after self-cal, rms=0.116395Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00014972 Jy ! Component: 100 - total flux cleaned = 1.30394e-05 Jy ! Component: 150 - total flux cleaned = -0.000176371 Jy ! Component: 200 - total flux cleaned = -0.000261721 Jy ! Total flux subtracted in 200 components = -0.000261721 Jy ! Clean residual min=-0.003522 max=0.003022 Jy/beam ! Clean residual mean=-0.000037 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0773689 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 0.077369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116381Jy sigma=0.000636 ! Fit after self-cal, rms=0.116381Jy sigma=0.000636 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=10.06 mas, bpa=3.432 degrees ! Estimated noise=1367.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 10.06 at 3.432 degrees (North through East) ! Clean map min=-0.0029026 max=0.071895 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.879 mas, bmaj=8.456 mas, bpa=2.272 degrees ! Estimated noise=1982.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0556069 Jy ! Component: 100 - total flux cleaned = 0.0681455 Jy ! Component: 150 - total flux cleaned = 0.073417 Jy ! Component: 200 - total flux cleaned = 0.0754972 Jy ! Total flux subtracted in 200 components = 0.0754972 Jy ! Clean residual min=-0.005053 max=0.004567 Jy/beam ! Clean residual mean=-0.000020 rms=0.001210 Jy/beam ! Combined flux in latest and established models = 0.0754972 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0754972 Jy ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=10.06 mas, bpa=3.432 degrees ! Estimated noise=1367.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164558 Jy ! Component: 100 - total flux cleaned = 0.00207983 Jy ! Component: 150 - total flux cleaned = 0.00236329 Jy ! Component: 200 - total flux cleaned = 0.0025969 Jy ! Total flux subtracted in 200 components = 0.0025969 Jy ! Clean residual min=-0.003113 max=0.003123 Jy/beam ! Clean residual mean=-0.000021 rms=0.000789 Jy/beam ! Combined flux in latest and established models = 0.0780941 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 31 components and 0.0780941 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.256 mas, bmaj=19.93 mas, bpa=3.862 degrees ! Estimated noise=1619.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226598 Jy ! Component: 100 - total flux cleaned = -0.000223975 Jy ! Component: 150 - total flux cleaned = -0.000371095 Jy ! Component: 200 - total flux cleaned = -0.000478083 Jy ! Total flux subtracted in 200 components = -0.000478083 Jy ! Clean residual min=-0.003592 max=0.003073 Jy/beam ! Clean residual mean=-0.000036 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.077616 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.88782e-05 Jy ! Component: 100 - total flux cleaned = -0.000167693 Jy ! Component: 150 - total flux cleaned = -0.000252624 Jy ! Component: 200 - total flux cleaned = -0.000312712 Jy ! Total flux subtracted in 200 components = -0.000312712 Jy ! Clean residual min=-0.003531 max=0.003037 Jy/beam ! Clean residual mean=-0.000036 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.0773033 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 49 components and 0.0773033 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.534 mas, bmaj=10.06 mas, bpa=3.432 degrees ! Estimated noise=1367.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.87522e-05 Jy ! Component: 100 - total flux cleaned = 0.000114487 Jy ! Component: 150 - total flux cleaned = 8.23738e-05 Jy ! Component: 200 - total flux cleaned = 5.36039e-05 Jy ! Total flux subtracted in 200 components = 5.36039e-05 Jy ! Clean residual min=-0.002967 max=0.003144 Jy/beam ! Clean residual mean=-0.000021 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0773569 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 70 components and 0.0773569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116374Jy sigma=0.000636 ! Fit after self-cal, rms=0.116363Jy sigma=0.000635 wmodel J0434-2514_S_2017_05_01_pus_map.mod ! Writing 70 model components to file: J0434-2514_S_2017_05_01_pus_map.mod wobs J0434-2514_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0434-2514_S_2017_05_01_pus_uvs.fits wwins J0434-2514_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0434-2514_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000217783 Jy ! Component: 100 - total flux cleaned = -0.000747409 Jy ! Component: 150 - total flux cleaned = -0.00109161 Jy ! Component: 200 - total flux cleaned = -0.00132232 Jy ! Component: 250 - total flux cleaned = -0.00158577 Jy ! Component: 300 - total flux cleaned = -0.00188061 Jy ! Component: 350 - total flux cleaned = -0.0022066 Jy ! Component: 400 - total flux cleaned = -0.00244357 Jy ! Component: 450 - total flux cleaned = -0.00267469 Jy ! Component: 500 - total flux cleaned = -0.00304838 Jy ! Component: 550 - total flux cleaned = -0.00333911 Jy ! Component: 600 - total flux cleaned = -0.00358845 Jy ! Component: 650 - total flux cleaned = -0.0037967 Jy ! Component: 700 - total flux cleaned = -0.00406844 Jy ! Component: 750 - total flux cleaned = -0.00420085 Jy ! Component: 800 - total flux cleaned = -0.00433153 Jy ! Component: 850 - total flux cleaned = -0.00446018 Jy ! Component: 900 - total flux cleaned = -0.00455478 Jy ! Component: 950 - total flux cleaned = -0.00477185 Jy ! Component: 1000 - total flux cleaned = -0.00489397 Jy ! Component: 1050 - total flux cleaned = -0.00504408 Jy ! Component: 1100 - total flux cleaned = -0.00516242 Jy ! Component: 1150 - total flux cleaned = -0.00542323 Jy ! Component: 1200 - total flux cleaned = -0.00550829 Jy ! Component: 1250 - total flux cleaned = -0.00562099 Jy ! Component: 1300 - total flux cleaned = -0.00564884 Jy ! Component: 1350 - total flux cleaned = -0.00578583 Jy ! Component: 1400 - total flux cleaned = -0.00584038 Jy ! Component: 1450 - total flux cleaned = -0.0058402 Jy ! Component: 1500 - total flux cleaned = -0.00589297 Jy ! Component: 1550 - total flux cleaned = -0.0059188 Jy ! Component: 1600 - total flux cleaned = -0.00594454 Jy ! Component: 1650 - total flux cleaned = -0.00604529 Jy ! Component: 1700 - total flux cleaned = -0.00599471 Jy ! Component: 1750 - total flux cleaned = -0.00596948 Jy ! Component: 1800 - total flux cleaned = -0.00601868 Jy ! Component: 1850 - total flux cleaned = -0.00613945 Jy ! Component: 1900 - total flux cleaned = -0.00611551 Jy ! Component: 1950 - total flux cleaned = -0.00623397 Jy ! Component: 2000 - total flux cleaned = -0.00621038 Jy ! Component: 2050 - total flux cleaned = -0.00618727 Jy ! Component: 2100 - total flux cleaned = -0.00630199 Jy ! Component: 2150 - total flux cleaned = -0.00637012 Jy ! Component: 2200 - total flux cleaned = -0.00652707 Jy ! Component: 2250 - total flux cleaned = -0.0065935 Jy ! Component: 2300 - total flux cleaned = -0.00670345 Jy ! Component: 2350 - total flux cleaned = -0.00676885 Jy ! Component: 2400 - total flux cleaned = -0.00681207 Jy ! Component: 2450 - total flux cleaned = -0.00694032 Jy ! Component: 2500 - total flux cleaned = -0.00706706 Jy ! Component: 2550 - total flux cleaned = -0.00712984 Jy ! Component: 2600 - total flux cleaned = -0.00721282 Jy ! Component: 2650 - total flux cleaned = -0.00723339 Jy ! Component: 2700 - total flux cleaned = -0.00735569 Jy ! Component: 2750 - total flux cleaned = -0.00745681 Jy ! Component: 2800 - total flux cleaned = -0.00745688 Jy ! Component: 2850 - total flux cleaned = -0.00757619 Jy ! Component: 2900 - total flux cleaned = -0.00759593 Jy ! Component: 2950 - total flux cleaned = -0.00763516 Jy ! Component: 3000 - total flux cleaned = -0.00779073 Jy ! Component: 3050 - total flux cleaned = -0.00786762 Jy ! Component: 3100 - total flux cleaned = -0.00792502 Jy ! Component: 3150 - total flux cleaned = -0.00790591 Jy ! Component: 3200 - total flux cleaned = -0.00794358 Jy ! Component: 3250 - total flux cleaned = -0.00803703 Jy ! Component: 3300 - total flux cleaned = -0.00811139 Jy ! Component: 3350 - total flux cleaned = -0.0081852 Jy ! Component: 3400 - total flux cleaned = -0.00827693 Jy ! Component: 3450 - total flux cleaned = -0.00820407 Jy ! Component: 3500 - total flux cleaned = -0.00833059 Jy ! Component: 3550 - total flux cleaned = -0.00840238 Jy ! Component: 3600 - total flux cleaned = -0.00834889 Jy ! Component: 3650 - total flux cleaned = -0.00836676 Jy ! Component: 3700 - total flux cleaned = -0.00841948 Jy ! Component: 3750 - total flux cleaned = -0.0084545 Jy ! Component: 3800 - total flux cleaned = -0.00852386 Jy ! Component: 3850 - total flux cleaned = -0.00860993 Jy ! Component: 3900 - total flux cleaned = -0.00867831 Jy ! Component: 3950 - total flux cleaned = -0.00871222 Jy ! Component: 4000 - total flux cleaned = -0.00869527 Jy ! Component: 4050 - total flux cleaned = -0.00874549 Jy ! Total flux subtracted in 4096 components = -0.00874542 Jy ! Clean residual min=-0.001127 max=0.000846 Jy/beam ! Clean residual mean=-0.000009 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 0.0686115 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 341 components and 0.0686115 Jy ![Exited script file: muppet] wmap "J0434-2514_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 10.06 at 3.432 degrees (North through East) ! Clean map min=-0.003151 max=0.071526 Jy/beam ! Writing clean map to FITS file: J0434-2514_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0715265 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000313971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.31687 1.31687 2.63374 5.26749 10.535 21.0699 42.1399 84.2798 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.071 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.534 x 10.06 at 3.432 degrees (North through East) ! Clean map min=-0.003151 max=0.071526 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0434-2514_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:27:08 2019