! Started logfile: J0433+2905_S_2017_02_19_pus_uvs.log on Sat May 4 18:42:21 2019 obs J0433+2905_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0433+2905_S_2017_02_19_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.709402 visibilities/baseline/integration-bin. ! Found source: J0433+2905 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 1660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0433+2905_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 61 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.851385Jy sigma=0.006485 ! Fit after self-cal, rms=0.845185Jy sigma=0.006442 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=8.453 mas, bpa=-38.89 degrees ! Estimated noise=2985.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119511 Jy ! Component: 100 - total flux cleaned = 0.149326 Jy ! Total flux subtracted in 100 components = 0.149326 Jy ! Clean residual min=-0.010410 max=0.012542 Jy/beam ! Clean residual mean=0.000002 rms=0.002950 Jy/beam ! Combined flux in latest and established models = 0.149326 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.149326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103024Jy sigma=0.000703 ! Fit after self-cal, rms=0.103017Jy sigma=0.000702 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=8.389 mas, bpa=-38.24 degrees ! Estimated noise=2548.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157148 Jy ! Component: 100 - total flux cleaned = 0.0232843 Jy ! Component: 150 - total flux cleaned = 0.0284545 Jy ! Component: 200 - total flux cleaned = 0.0321977 Jy ! Total flux subtracted in 200 components = 0.0321977 Jy ! Clean residual min=-0.009177 max=0.010122 Jy/beam ! Clean residual mean=-0.000003 rms=0.002276 Jy/beam ! Combined flux in latest and established models = 0.181524 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 29 components and 0.181524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100254Jy sigma=0.000685 ! Fit after self-cal, rms=0.100247Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.86 HN 0.98 KP 1.22 ! LA 1.00 MK 1.02 NL 0.87 OV 1.01 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.91 HN 1.05 KP 1.13 ! LA 0.97 MK 0.90 NL 1.07 OV 1.09 ! PT 1.00* SC 1.13 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.93 HN 1.00 KP 0.94 ! LA 0.75 MK 1.02 NL 1.29 OV 0.93 ! PT 1.00* SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.93 HN 0.87 KP 1.00* ! LA 0.80 MK 1.32 NL 1.00* OV 0.97 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.100247Jy sigma=0.000685 ! Fit after self-cal, rms=0.098484Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=8.434 mas, bpa=-38.3 degrees ! Estimated noise=2522.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140606 Jy ! Component: 100 - total flux cleaned = -0.00187643 Jy ! Component: 150 - total flux cleaned = -0.00187427 Jy ! Component: 200 - total flux cleaned = -0.00192188 Jy ! Total flux subtracted in 200 components = -0.00192188 Jy ! Clean residual min=-0.006259 max=0.006057 Jy/beam ! Clean residual mean=-0.000001 rms=0.001419 Jy/beam ! Combined flux in latest and established models = 0.179602 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.179602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098361Jy sigma=0.000660 ! Fit after self-cal, rms=0.098403Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098403Jy sigma=0.000659 ! Fit after self-cal, rms=0.098679Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.393 mas, bmaj=8.444 mas, bpa=-38.34 degrees ! Estimated noise=2519.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00107584 Jy ! Component: 100 - total flux cleaned = -0.00120053 Jy ! Component: 150 - total flux cleaned = -0.00113229 Jy ! Component: 200 - total flux cleaned = -0.00103495 Jy ! Total flux subtracted in 200 components = -0.00103495 Jy ! Clean residual min=-0.005964 max=0.005911 Jy/beam ! Clean residual mean=-0.000001 rms=0.001390 Jy/beam ! Combined flux in latest and established models = 0.178567 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 48 components and 0.178567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098648Jy sigma=0.000659 ! Fit after self-cal, rms=0.098649Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000230362 Jy ! Component: 100 - total flux cleaned = -0.000140022 Jy ! Component: 150 - total flux cleaned = -5.5281e-05 Jy ! Component: 200 - total flux cleaned = 2.49682e-05 Jy ! Total flux subtracted in 200 components = 2.49682e-05 Jy ! Clean residual min=-0.005922 max=0.005871 Jy/beam ! Clean residual mean=-0.000001 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 0.178592 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 0.178592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098633Jy sigma=0.000659 ! Fit after self-cal, rms=0.098630Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098630Jy sigma=0.000659 ! Fit after self-cal, rms=0.098659Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.394 mas, bmaj=8.449 mas, bpa=-38.38 degrees ! Estimated noise=2516.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456702 Jy ! Component: 100 - total flux cleaned = -0.000536321 Jy ! Component: 150 - total flux cleaned = -0.000535408 Jy ! Component: 200 - total flux cleaned = -0.000558529 Jy ! Total flux subtracted in 200 components = -0.000558529 Jy ! Clean residual min=-0.005805 max=0.005856 Jy/beam ! Clean residual mean=-0.000001 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 0.178033 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.178034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098645Jy sigma=0.000659 ! Fit after self-cal, rms=0.098647Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-88.5, 15.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0012314 Jy ! Component: 100 - total flux cleaned = 0.00107394 Jy ! Component: 150 - total flux cleaned = 0.000962686 Jy ! Component: 200 - total flux cleaned = 0.000696344 Jy ! Total flux subtracted in 200 components = 0.000696344 Jy ! Clean residual min=-0.004456 max=0.004363 Jy/beam ! Clean residual mean=-0.000002 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.17873 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 83 components and 0.17873 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098288Jy sigma=0.000655 ! Fit after self-cal, rms=0.098274Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098274Jy sigma=0.000655 ! Fit after self-cal, rms=0.098342Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=8.956 mas, bpa=-33.13 degrees ! Estimated noise=3082.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000468514 Jy ! Component: 100 - total flux cleaned = 0.000383084 Jy ! Component: 150 - total flux cleaned = 0.000240779 Jy ! Component: 200 - total flux cleaned = 0.000241991 Jy ! Total flux subtracted in 200 components = 0.000241991 Jy ! Clean residual min=-0.004630 max=0.004127 Jy/beam ! Clean residual mean=-0.000003 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.178972 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 112 components and 0.178972 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098256Jy sigma=0.000655 ! Fit after self-cal, rms=0.098266Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.36055e-05 Jy ! Component: 100 - total flux cleaned = 0.000106504 Jy ! Component: 150 - total flux cleaned = 0.000152885 Jy ! Component: 200 - total flux cleaned = 0.000279387 Jy ! Total flux subtracted in 200 components = 0.000279387 Jy ! Clean residual min=-0.004524 max=0.004038 Jy/beam ! Clean residual mean=-0.000003 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.179251 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 130 components and 0.179251 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098241Jy sigma=0.000654 ! Fit after self-cal, rms=0.098246Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=8.457 mas, bpa=-38.44 degrees ! Estimated noise=2509.47 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 8.457 at -38.44 degrees (North through East) ! Clean map min=-0.0047299 max=0.15522 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.782 mas, bmaj=8.507 mas, bpa=-38.91 degrees ! Estimated noise=2932.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.117185 Jy ! Component: 100 - total flux cleaned = 0.146356 Jy ! Component: 150 - total flux cleaned = 0.159343 Jy ! Component: 200 - total flux cleaned = 0.163164 Jy ! Total flux subtracted in 200 components = 0.163164 Jy ! Clean residual min=-0.006798 max=0.006202 Jy/beam ! Clean residual mean=0.000000 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.163164 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.163164 Jy ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=8.457 mas, bpa=-38.44 degrees ! Estimated noise=2509.47 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561322 Jy ! Component: 100 - total flux cleaned = 0.00763701 Jy ! Component: 150 - total flux cleaned = 0.00813482 Jy ! Component: 200 - total flux cleaned = 0.00886313 Jy ! Total flux subtracted in 200 components = 0.00886313 Jy ! Clean residual min=-0.005570 max=0.004538 Jy/beam ! Clean residual mean=-0.000001 rms=0.001312 Jy/beam ! Combined flux in latest and established models = 0.172027 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 40 components and 0.172027 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=8.956 mas, bpa=-33.13 degrees ! Estimated noise=3082.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217752 Jy ! Component: 100 - total flux cleaned = 0.00316742 Jy ! Component: 150 - total flux cleaned = 0.00400858 Jy ! Component: 200 - total flux cleaned = 0.00438858 Jy ! Total flux subtracted in 200 components = 0.00438858 Jy ! Clean residual min=-0.005331 max=0.004074 Jy/beam ! Clean residual mean=-0.000003 rms=0.001279 Jy/beam ! Combined flux in latest and established models = 0.176415 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332115 Jy ! Component: 100 - total flux cleaned = 0.000479316 Jy ! Component: 150 - total flux cleaned = 0.000683512 Jy ! Component: 200 - total flux cleaned = 0.000930078 Jy ! Total flux subtracted in 200 components = 0.000930078 Jy ! Clean residual min=-0.004943 max=0.003804 Jy/beam ! Clean residual mean=-0.000003 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.177345 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 95 components and 0.177345 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=8.457 mas, bpa=-38.44 degrees ! Estimated noise=2509.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114773 Jy ! Component: 100 - total flux cleaned = -0.00168716 Jy ! Component: 150 - total flux cleaned = -0.00182579 Jy ! Component: 200 - total flux cleaned = -0.00213191 Jy ! Total flux subtracted in 200 components = -0.00213191 Jy ! Clean residual min=-0.004676 max=0.003905 Jy/beam ! Clean residual mean=-0.000002 rms=0.001042 Jy/beam ! Combined flux in latest and established models = 0.175213 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 111 components and 0.175213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098270Jy sigma=0.000654 ! Fit after self-cal, rms=0.098241Jy sigma=0.000654 wmodel J0433+2905_S_2017_02_19_pus_map.mod ! Writing 111 model components to file: J0433+2905_S_2017_02_19_pus_map.mod wobs J0433+2905_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0433+2905_S_2017_02_19_pus_uvs.fits wwins J0433+2905_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0433+2905_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00145891 Jy ! Component: 100 - total flux cleaned = -0.0015984 Jy ! Component: 150 - total flux cleaned = -0.00179517 Jy ! Component: 200 - total flux cleaned = -0.00204222 Jy ! Component: 250 - total flux cleaned = -0.00198374 Jy ! Component: 300 - total flux cleaned = -0.00192756 Jy ! Component: 350 - total flux cleaned = -0.00165453 Jy ! Component: 400 - total flux cleaned = -0.0014963 Jy ! Component: 450 - total flux cleaned = -0.00129228 Jy ! Component: 500 - total flux cleaned = -0.00104654 Jy ! Component: 550 - total flux cleaned = -0.000759131 Jy ! Component: 600 - total flux cleaned = -0.00038504 Jy ! Component: 650 - total flux cleaned = -0.000248302 Jy ! Component: 700 - total flux cleaned = 1.73306e-05 Jy ! Component: 750 - total flux cleaned = 6.01878e-05 Jy ! Component: 800 - total flux cleaned = 0.000315446 Jy ! Component: 850 - total flux cleaned = 0.000438971 Jy ! Component: 900 - total flux cleaned = 0.000603233 Jy ! Component: 950 - total flux cleaned = 0.000763717 Jy ! Component: 1000 - total flux cleaned = 0.000685317 Jy ! Component: 1050 - total flux cleaned = 0.000764178 Jy ! Component: 1100 - total flux cleaned = 0.000725909 Jy ! Component: 1150 - total flux cleaned = 0.000763968 Jy ! Component: 1200 - total flux cleaned = 0.000764054 Jy ! Component: 1250 - total flux cleaned = 0.000691288 Jy ! Component: 1300 - total flux cleaned = 0.000655261 Jy ! Component: 1350 - total flux cleaned = 0.000584288 Jy ! Component: 1400 - total flux cleaned = 0.000514537 Jy ! Component: 1450 - total flux cleaned = 0.000514718 Jy ! Component: 1500 - total flux cleaned = 0.00048095 Jy ! Component: 1550 - total flux cleaned = 0.000413615 Jy ! Component: 1600 - total flux cleaned = 0.000347328 Jy ! Component: 1650 - total flux cleaned = 0.000216018 Jy ! Component: 1700 - total flux cleaned = 0.000183868 Jy ! Component: 1750 - total flux cleaned = 0.000151528 Jy ! Component: 1800 - total flux cleaned = -7.27697e-06 Jy ! Component: 1850 - total flux cleaned = -0.000133293 Jy ! Component: 1900 - total flux cleaned = -0.000164376 Jy ! Component: 1950 - total flux cleaned = -0.000288001 Jy ! Component: 2000 - total flux cleaned = -0.000471747 Jy ! Component: 2050 - total flux cleaned = -0.000502012 Jy ! Component: 2100 - total flux cleaned = -0.000592464 Jy ! Component: 2150 - total flux cleaned = -0.000681878 Jy ! Component: 2200 - total flux cleaned = -0.000740855 Jy ! Component: 2250 - total flux cleaned = -0.000681898 Jy ! Component: 2300 - total flux cleaned = -0.000681846 Jy ! Component: 2350 - total flux cleaned = -0.000739764 Jy ! Component: 2400 - total flux cleaned = -0.000739626 Jy ! Component: 2450 - total flux cleaned = -0.000739497 Jy ! Component: 2500 - total flux cleaned = -0.000739305 Jy ! Component: 2550 - total flux cleaned = -0.000711091 Jy ! Component: 2600 - total flux cleaned = -0.000851927 Jy ! Component: 2650 - total flux cleaned = -0.000879894 Jy ! Component: 2700 - total flux cleaned = -0.000935546 Jy ! Component: 2750 - total flux cleaned = -0.000963243 Jy ! Component: 2800 - total flux cleaned = -0.000990858 Jy ! Component: 2850 - total flux cleaned = -0.000990774 Jy ! Component: 2900 - total flux cleaned = -0.00101803 Jy ! Component: 2950 - total flux cleaned = -0.000990724 Jy ! Component: 3000 - total flux cleaned = -0.000936563 Jy ! Component: 3050 - total flux cleaned = -0.000963638 Jy ! Component: 3100 - total flux cleaned = -0.000882782 Jy ! Component: 3150 - total flux cleaned = -0.000882778 Jy ! Component: 3200 - total flux cleaned = -0.000775639 Jy ! Component: 3250 - total flux cleaned = -0.000722375 Jy ! Component: 3300 - total flux cleaned = -0.000642483 Jy ! Component: 3350 - total flux cleaned = -0.000589419 Jy ! Component: 3400 - total flux cleaned = -0.000509902 Jy ! Component: 3450 - total flux cleaned = -0.000404024 Jy ! Component: 3500 - total flux cleaned = -0.000351272 Jy ! Component: 3550 - total flux cleaned = -0.000193556 Jy ! Component: 3600 - total flux cleaned = -0.00016737 Jy ! Component: 3650 - total flux cleaned = -6.25624e-05 Jy ! Component: 3700 - total flux cleaned = 4.19127e-05 Jy ! Component: 3750 - total flux cleaned = 6.80019e-05 Jy ! Component: 3800 - total flux cleaned = 0.000172087 Jy ! Component: 3850 - total flux cleaned = 0.000249724 Jy ! Component: 3900 - total flux cleaned = 0.000249586 Jy ! Component: 3950 - total flux cleaned = 0.000352894 Jy ! Component: 4000 - total flux cleaned = 0.000352947 Jy ! Component: 4050 - total flux cleaned = 0.000404395 Jy ! Total flux subtracted in 4096 components = 0.000455872 Jy ! Clean residual min=-0.001619 max=0.001680 Jy/beam ! Clean residual mean=-0.000000 rms=0.000417 Jy/beam ! Combined flux in latest and established models = 0.175669 Jy keep ! Adding 226 model components to the UV plane model. ! The established model now contains 337 components and 0.175669 Jy ![Exited script file: muppet] wmap "J0433+2905_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 8.457 at -38.44 degrees (North through East) ! Clean map min=-0.0048837 max=0.15442 Jy/beam ! Writing clean map to FITS file: J0433+2905_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.154423 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000411915 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.800234 0.800234 1.60047 3.20094 6.40188 12.8038 25.6075 51.215 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.154 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 8.457 at -38.44 degrees (North through East) ! Clean map min=-0.0048837 max=0.15442 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0433+2905_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:42:25 2019