! Started logfile: J0432-1614_S_2017_02_19_pus_uvs.log on Sat May 4 18:42:16 2019 obs J0432-1614_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0432-1614_S_2017_02_19_pus_uva.fits ! AN table 1: 124 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.52043 visibilities/baseline/integration-bin. ! Found source: J0432-1614 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 11616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0432-1614_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 509 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 497 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 515 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 779 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.851463Jy sigma=0.006240 ! Fit after self-cal, rms=0.843822Jy sigma=0.006190 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.345 mas, bmaj=6.579 mas, bpa=-4.338 degrees ! Estimated noise=1250.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123538 Jy ! Component: 100 - total flux cleaned = 0.150477 Jy ! Total flux subtracted in 100 components = 0.150477 Jy ! Clean residual min=-0.005544 max=0.007515 Jy/beam ! Clean residual mean=0.000004 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.150477 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.150477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100759Jy sigma=0.000687 ! Fit after self-cal, rms=0.100757Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.838 mas, bmaj=7.258 mas, bpa=-3.467 degrees ! Estimated noise=998.125 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00937134 Jy ! Component: 100 - total flux cleaned = 0.0137619 Jy ! Component: 150 - total flux cleaned = 0.0161959 Jy ! Component: 200 - total flux cleaned = 0.0176172 Jy ! Total flux subtracted in 200 components = 0.0176172 Jy ! Clean residual min=-0.004656 max=0.005364 Jy/beam ! Clean residual mean=0.000000 rms=0.001086 Jy/beam ! Combined flux in latest and established models = 0.168094 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.168094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099754Jy sigma=0.000682 ! Fit after self-cal, rms=0.099722Jy sigma=0.000682 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.91 HN 1.03 KP 1.09 ! LA 1.02 MK 0.96 NL 0.87 OV 1.08 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.05 KP 1.00 ! LA 0.99 MK 0.99 NL 1.06 OV 1.13 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.00 KP 0.88 ! LA 0.77 MK 0.99 NL 1.17 OV 1.00 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.05 HN 0.94 KP 1.00* ! LA 0.76 MK 1.20 NL 1.00* OV 1.01 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.099722Jy sigma=0.000682 ! Fit after self-cal, rms=0.095061Jy sigma=0.000667 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.278 mas, bpa=-3.256 degrees ! Estimated noise=993.737 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000489086 Jy ! Component: 100 - total flux cleaned = -0.000657462 Jy ! Component: 150 - total flux cleaned = -0.000763845 Jy ! Component: 200 - total flux cleaned = -0.000822068 Jy ! Total flux subtracted in 200 components = -0.000822068 Jy ! Clean residual min=-0.002935 max=0.003574 Jy/beam ! Clean residual mean=-0.000006 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.167272 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.167272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095043Jy sigma=0.000667 ! Fit after self-cal, rms=0.095017Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095017Jy sigma=0.000666 ! Fit after self-cal, rms=0.096575Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.281 mas, bpa=-3.294 degrees ! Estimated noise=995.025 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.80939e-05 Jy ! Component: 100 - total flux cleaned = 1.2404e-05 Jy ! Component: 150 - total flux cleaned = 4.09752e-05 Jy ! Component: 200 - total flux cleaned = 6.62435e-05 Jy ! Total flux subtracted in 200 components = 6.62435e-05 Jy ! Clean residual min=-0.002830 max=0.003005 Jy/beam ! Clean residual mean=-0.000006 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 0.167338 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.167338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096569Jy sigma=0.000663 ! Fit after self-cal, rms=0.096621Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6, 6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00229619 Jy ! Component: 100 - total flux cleaned = 0.00252754 Jy ! Component: 150 - total flux cleaned = 0.00265902 Jy ! Component: 200 - total flux cleaned = 0.0027966 Jy ! Total flux subtracted in 200 components = 0.0027966 Jy ! Clean residual min=-0.002671 max=0.002646 Jy/beam ! Clean residual mean=-0.000007 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.170135 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.170135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096548Jy sigma=0.000663 ! Fit after self-cal, rms=0.096543Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096543Jy sigma=0.000663 ! Fit after self-cal, rms=0.096786Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.287 mas, bpa=-3.306 degrees ! Estimated noise=993.441 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000497757 Jy ! Component: 100 - total flux cleaned = 0.000525754 Jy ! Component: 150 - total flux cleaned = 0.000525503 Jy ! Component: 200 - total flux cleaned = 0.000524588 Jy ! Total flux subtracted in 200 components = 0.000524588 Jy ! Clean residual min=-0.002643 max=0.002439 Jy/beam ! Clean residual mean=-0.000003 rms=0.000585 Jy/beam ! Combined flux in latest and established models = 0.170659 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 84 components and 0.170659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096768Jy sigma=0.000661 ! Fit after self-cal, rms=0.096779Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.45181e-05 Jy ! Component: 100 - total flux cleaned = 6.63438e-05 Jy ! Component: 150 - total flux cleaned = 0.000106519 Jy ! Component: 200 - total flux cleaned = 0.000162208 Jy ! Total flux subtracted in 200 components = 0.000162208 Jy ! Clean residual min=-0.002644 max=0.002445 Jy/beam ! Clean residual mean=-0.000003 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 0.170822 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 91 components and 0.170822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096771Jy sigma=0.000661 ! Fit after self-cal, rms=0.096770Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096770Jy sigma=0.000661 ! Fit after self-cal, rms=0.096771Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.837 mas, bmaj=13.66 mas, bpa=5.015 degrees ! Estimated noise=1361.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394993 Jy ! Component: 100 - total flux cleaned = 0.000640102 Jy ! Component: 150 - total flux cleaned = 0.000764472 Jy ! Component: 200 - total flux cleaned = 0.00085497 Jy ! Total flux subtracted in 200 components = 0.00085497 Jy ! Clean residual min=-0.002559 max=0.002720 Jy/beam ! Clean residual mean=-0.000006 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.171677 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 94 components and 0.171677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096771Jy sigma=0.000661 ! Fit after self-cal, rms=0.096773Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.46218e-05 Jy ! Component: 100 - total flux cleaned = 7.81954e-06 Jy ! Component: 150 - total flux cleaned = 5.25288e-05 Jy ! Component: 200 - total flux cleaned = 8.02492e-05 Jy ! Total flux subtracted in 200 components = 8.02492e-05 Jy ! Clean residual min=-0.002588 max=0.002744 Jy/beam ! Clean residual mean=-0.000006 rms=0.000783 Jy/beam ! Combined flux in latest and established models = 0.171757 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 97 components and 0.171757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096774Jy sigma=0.000661 ! Fit after self-cal, rms=0.096773Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.291 mas, bpa=-3.328 degrees ! Estimated noise=992.639 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 7.291 at -3.328 degrees (North through East) ! Clean map min=-0.0025584 max=0.15855 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.338 mas, bmaj=6.578 mas, bpa=-4.066 degrees ! Estimated noise=1216.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122691 Jy ! Component: 100 - total flux cleaned = 0.149448 Jy ! Component: 150 - total flux cleaned = 0.156498 Jy ! Component: 200 - total flux cleaned = 0.160494 Jy ! Total flux subtracted in 200 components = 0.160494 Jy ! Clean residual min=-0.003016 max=0.002903 Jy/beam ! Clean residual mean=0.000001 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.160494 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.160494 Jy ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.291 mas, bpa=-3.328 degrees ! Estimated noise=992.639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00421883 Jy ! Component: 100 - total flux cleaned = 0.00689846 Jy ! Component: 150 - total flux cleaned = 0.00874825 Jy ! Component: 200 - total flux cleaned = 0.00971948 Jy ! Total flux subtracted in 200 components = 0.00971948 Jy ! Clean residual min=-0.002787 max=0.002424 Jy/beam ! Clean residual mean=-0.000002 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.170214 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 45 components and 0.170214 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.837 mas, bmaj=13.66 mas, bpa=5.015 degrees ! Estimated noise=1361.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000716397 Jy ! Component: 100 - total flux cleaned = 0.00114017 Jy ! Component: 150 - total flux cleaned = 0.00148051 Jy ! Component: 200 - total flux cleaned = 0.00173593 Jy ! Total flux subtracted in 200 components = 0.00173593 Jy ! Clean residual min=-0.002532 max=0.002764 Jy/beam ! Clean residual mean=-0.000006 rms=0.000793 Jy/beam ! Combined flux in latest and established models = 0.171949 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109464 Jy ! Component: 100 - total flux cleaned = 0.000149342 Jy ! Component: 150 - total flux cleaned = 0.000203965 Jy ! Component: 200 - total flux cleaned = 0.000254658 Jy ! Total flux subtracted in 200 components = 0.000254658 Jy ! Clean residual min=-0.002564 max=0.002790 Jy/beam ! Clean residual mean=-0.000006 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.172204 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.172204 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.291 mas, bpa=-3.328 degrees ! Estimated noise=992.639 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156671 Jy ! Component: 100 - total flux cleaned = -0.0003031 Jy ! Component: 150 - total flux cleaned = -0.00042617 Jy ! Component: 200 - total flux cleaned = -0.000505319 Jy ! Total flux subtracted in 200 components = -0.000505319 Jy ! Clean residual min=-0.002711 max=0.002474 Jy/beam ! Clean residual mean=-0.000003 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.171699 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.171699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096777Jy sigma=0.000661 ! Fit after self-cal, rms=0.096777Jy sigma=0.000661 wmodel J0432-1614_S_2017_02_19_pus_map.mod ! Writing 81 model components to file: J0432-1614_S_2017_02_19_pus_map.mod wobs J0432-1614_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0432-1614_S_2017_02_19_pus_uvs.fits wwins J0432-1614_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0432-1614_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000603439 Jy ! Component: 100 - total flux cleaned = -0.000645325 Jy ! Component: 150 - total flux cleaned = -0.000404342 Jy ! Component: 200 - total flux cleaned = -0.000175504 Jy ! Component: 250 - total flux cleaned = -0.000246957 Jy ! Component: 300 - total flux cleaned = -0.000246387 Jy ! Component: 350 - total flux cleaned = -0.000246399 Jy ! Component: 400 - total flux cleaned = -0.000180783 Jy ! Component: 450 - total flux cleaned = -0.000149243 Jy ! Component: 500 - total flux cleaned = -0.000212351 Jy ! Component: 550 - total flux cleaned = -0.000304631 Jy ! Component: 600 - total flux cleaned = -0.000425179 Jy ! Component: 650 - total flux cleaned = -0.000395461 Jy ! Component: 700 - total flux cleaned = -0.000629327 Jy ! Component: 750 - total flux cleaned = -0.000686165 Jy ! Component: 800 - total flux cleaned = -0.000828661 Jy ! Component: 850 - total flux cleaned = -0.00102554 Jy ! Component: 900 - total flux cleaned = -0.00119138 Jy ! Component: 950 - total flux cleaned = -0.00140977 Jy ! Component: 1000 - total flux cleaned = -0.00149017 Jy ! Component: 1050 - total flux cleaned = -0.00170278 Jy ! Component: 1100 - total flux cleaned = -0.00180743 Jy ! Component: 1150 - total flux cleaned = -0.00175575 Jy ! Component: 1200 - total flux cleaned = -0.00188432 Jy ! Component: 1250 - total flux cleaned = -0.00188434 Jy ! Component: 1300 - total flux cleaned = -0.00190961 Jy ! Component: 1350 - total flux cleaned = -0.00200911 Jy ! Component: 1400 - total flux cleaned = -0.00200902 Jy ! Component: 1450 - total flux cleaned = -0.00208165 Jy ! Component: 1500 - total flux cleaned = -0.00203379 Jy ! Component: 1550 - total flux cleaned = -0.00212863 Jy ! Component: 1600 - total flux cleaned = -0.00215224 Jy ! Component: 1650 - total flux cleaned = -0.00215233 Jy ! Component: 1700 - total flux cleaned = -0.0022679 Jy ! Component: 1750 - total flux cleaned = -0.00229056 Jy ! Component: 1800 - total flux cleaned = -0.00231328 Jy ! Component: 1850 - total flux cleaned = -0.00231338 Jy ! Component: 1900 - total flux cleaned = -0.00235797 Jy ! Component: 1950 - total flux cleaned = -0.00235814 Jy ! Component: 2000 - total flux cleaned = -0.0023582 Jy ! Component: 2050 - total flux cleaned = -0.0024231 Jy ! Component: 2100 - total flux cleaned = -0.00240164 Jy ! Component: 2150 - total flux cleaned = -0.00238044 Jy ! Component: 2200 - total flux cleaned = -0.00242266 Jy ! Component: 2250 - total flux cleaned = -0.00240182 Jy ! Component: 2300 - total flux cleaned = -0.00238111 Jy ! Component: 2350 - total flux cleaned = -0.00240162 Jy ! Component: 2400 - total flux cleaned = -0.00242169 Jy ! Component: 2450 - total flux cleaned = -0.0023812 Jy ! Component: 2500 - total flux cleaned = -0.00240097 Jy ! Component: 2550 - total flux cleaned = -0.00238108 Jy ! Component: 2600 - total flux cleaned = -0.00242034 Jy ! Component: 2650 - total flux cleaned = -0.00236142 Jy ! Component: 2700 - total flux cleaned = -0.00243895 Jy ! Component: 2750 - total flux cleaned = -0.00243881 Jy ! Component: 2800 - total flux cleaned = -0.00249606 Jy ! Component: 2850 - total flux cleaned = -0.00243948 Jy ! Component: 2900 - total flux cleaned = -0.00258997 Jy ! Component: 2950 - total flux cleaned = -0.0025341 Jy ! Component: 3000 - total flux cleaned = -0.00258979 Jy ! Component: 3050 - total flux cleaned = -0.00255317 Jy ! Component: 3100 - total flux cleaned = -0.00260805 Jy ! Component: 3150 - total flux cleaned = -0.00268049 Jy ! Component: 3200 - total flux cleaned = -0.0026626 Jy ! Component: 3250 - total flux cleaned = -0.00273423 Jy ! Component: 3300 - total flux cleaned = -0.002734 Jy ! Component: 3350 - total flux cleaned = -0.0028572 Jy ! Component: 3400 - total flux cleaned = -0.00283955 Jy ! Component: 3450 - total flux cleaned = -0.00292642 Jy ! Component: 3500 - total flux cleaned = -0.00296099 Jy ! Component: 3550 - total flux cleaned = -0.00302934 Jy ! Component: 3600 - total flux cleaned = -0.00299518 Jy ! Component: 3650 - total flux cleaned = -0.00302903 Jy ! Component: 3700 - total flux cleaned = -0.00311305 Jy ! Component: 3750 - total flux cleaned = -0.00306295 Jy ! Component: 3800 - total flux cleaned = -0.0029966 Jy ! Component: 3850 - total flux cleaned = -0.0030131 Jy ! Component: 3900 - total flux cleaned = -0.00301319 Jy ! Component: 3950 - total flux cleaned = -0.00298049 Jy ! Component: 4000 - total flux cleaned = -0.00296427 Jy ! Component: 4050 - total flux cleaned = -0.00289985 Jy ! Total flux subtracted in 4096 components = -0.00293184 Jy ! Clean residual min=-0.001006 max=0.001078 Jy/beam ! Clean residual mean=-0.000001 rms=0.000294 Jy/beam ! Combined flux in latest and established models = 0.168767 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 365 components and 0.168767 Jy ![Exited script file: muppet] wmap "J0432-1614_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 7.291 at -3.328 degrees (North through East) ! Clean map min=-0.0023602 max=0.15808 Jy/beam ! Writing clean map to FITS file: J0432-1614_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.158082 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000292029 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.554197 0.554197 1.10839 2.21679 4.43357 8.86715 17.7343 35.4686 70.9372 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.158 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.841 x 7.291 at -3.328 degrees (North through East) ! Clean map min=-0.0023602 max=0.15808 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0432-1614_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:42:21 2019