! Started logfile: J0430-2507_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:19 2019 obs J0430-2507_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0430-2507_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.707488 visibilities/baseline/integration-bin. ! Found source: J0430-2507 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 11716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0430-2507_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 185 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 271 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 326 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 741 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.994575Jy sigma=0.007652 ! Fit after self-cal, rms=0.943687Jy sigma=0.007317 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=20 mas, bpa=-14.85 degrees ! Estimated noise=1631.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483268 Jy ! Component: 100 - total flux cleaned = 0.059881 Jy ! Total flux subtracted in 100 components = 0.059881 Jy ! Clean residual min=-0.006507 max=0.005366 Jy/beam ! Clean residual mean=-0.000039 rms=0.001706 Jy/beam ! Combined flux in latest and established models = 0.059881 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.059881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099771Jy sigma=0.000671 ! Fit after self-cal, rms=0.098832Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=22.33 mas, bpa=-15.22 degrees ! Estimated noise=1072.41 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353668 Jy ! Component: 100 - total flux cleaned = 0.00405032 Jy ! Component: 150 - total flux cleaned = 0.0043489 Jy ! Component: 200 - total flux cleaned = 0.00455034 Jy ! Total flux subtracted in 200 components = 0.00455034 Jy ! Clean residual min=-0.003819 max=0.003204 Jy/beam ! Clean residual mean=-0.000025 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.0644313 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 49 components and 0.0644313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098630Jy sigma=0.000665 ! Fit after self-cal, rms=0.098593Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.02 HN 0.86 KP 1.22 ! LA 1.01 MK 1.10 NL 0.99 OV 1.08 ! PT 0.88 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.96 KP 1.04 ! LA 1.05 MK 1.08 NL 1.00 OV 1.06 ! PT 0.84 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.96 KP 1.09 ! LA 0.79 MK 1.03 NL 1.09 OV 0.99 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.75 KP 1.00* ! LA 0.89 MK 0.95 NL 1.00* OV 1.00* ! PT 0.72 ! ! ! Fit before self-cal, rms=0.098593Jy sigma=0.000664 ! Fit after self-cal, rms=0.093701Jy sigma=0.000663 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=21.99 mas, bpa=-14.88 degrees ! Estimated noise=1069.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.47427e-05 Jy ! Component: 100 - total flux cleaned = -1.45942e-06 Jy ! Component: 150 - total flux cleaned = 7.06081e-05 Jy ! Component: 200 - total flux cleaned = 0.000131277 Jy ! Total flux subtracted in 200 components = 0.000131277 Jy ! Clean residual min=-0.002340 max=0.002645 Jy/beam ! Clean residual mean=-0.000001 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.0645626 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.0645626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093661Jy sigma=0.000662 ! Fit after self-cal, rms=0.093660Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093660Jy sigma=0.000661 ! Fit after self-cal, rms=0.095308Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.557 mas, bmaj=22.29 mas, bpa=-14.85 degrees ! Estimated noise=1074.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.7859e-05 Jy ! Component: 100 - total flux cleaned = -5.47936e-05 Jy ! Component: 150 - total flux cleaned = -2.78781e-05 Jy ! Component: 200 - total flux cleaned = -5.68525e-06 Jy ! Total flux subtracted in 200 components = -5.68525e-06 Jy ! Clean residual min=-0.001906 max=0.002420 Jy/beam ! Clean residual mean=0.000003 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0645569 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 73 components and 0.0645569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095288Jy sigma=0.000660 ! Fit after self-cal, rms=0.095550Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.05644e-05 Jy ! Component: 100 - total flux cleaned = 9.36326e-05 Jy ! Component: 150 - total flux cleaned = 9.41203e-05 Jy ! Component: 200 - total flux cleaned = 7.53508e-05 Jy ! Total flux subtracted in 200 components = 7.53508e-05 Jy ! Clean residual min=-0.002216 max=0.002436 Jy/beam ! Clean residual mean=-0.000002 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0646323 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 80 components and 0.0646323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095539Jy sigma=0.000660 ! Fit after self-cal, rms=0.095542Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095542Jy sigma=0.000660 ! Fit after self-cal, rms=0.096751Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.552 mas, bmaj=22.49 mas, bpa=-14.87 degrees ! Estimated noise=1075.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000283191 Jy ! Component: 100 - total flux cleaned = -0.000286268 Jy ! Component: 150 - total flux cleaned = -0.000265715 Jy ! Component: 200 - total flux cleaned = -0.000266106 Jy ! Total flux subtracted in 200 components = -0.000266106 Jy ! Clean residual min=-0.002039 max=0.002434 Jy/beam ! Clean residual mean=0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0643662 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.0643662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096735Jy sigma=0.000659 ! Fit after self-cal, rms=0.096909Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000230919 Jy ! Component: 100 - total flux cleaned = 0.000211548 Jy ! Component: 150 - total flux cleaned = 0.000193682 Jy ! Component: 200 - total flux cleaned = 0.000176408 Jy ! Total flux subtracted in 200 components = 0.000176408 Jy ! Clean residual min=-0.002087 max=0.002375 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0645426 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 100 components and 0.0645426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096899Jy sigma=0.000659 ! Fit after self-cal, rms=0.096904Jy sigma=0.000659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096904Jy sigma=0.000659 ! Fit after self-cal, rms=0.097607Jy sigma=0.000659 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.103 mas, bmaj=29.81 mas, bpa=-6.671 degrees ! Estimated noise=1243.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.549e-06 Jy ! Component: 100 - total flux cleaned = 2.89935e-05 Jy ! Component: 150 - total flux cleaned = 6.01983e-05 Jy ! Component: 200 - total flux cleaned = 6.08278e-05 Jy ! Total flux subtracted in 200 components = 6.08278e-05 Jy ! Clean residual min=-0.002011 max=0.001963 Jy/beam ! Clean residual mean=0.000002 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0646034 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 109 components and 0.0646034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097601Jy sigma=0.000659 ! Fit after self-cal, rms=0.097680Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.66045e-05 Jy ! Component: 100 - total flux cleaned = 1.01154e-06 Jy ! Component: 150 - total flux cleaned = -1.27639e-05 Jy ! Component: 200 - total flux cleaned = -1.2714e-05 Jy ! Total flux subtracted in 200 components = -1.2714e-05 Jy ! Clean residual min=-0.002011 max=0.001856 Jy/beam ! Clean residual mean=-0.000002 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0645907 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 116 components and 0.0645907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097676Jy sigma=0.000659 ! Fit after self-cal, rms=0.097675Jy sigma=0.000659 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=22.63 mas, bpa=-14.89 degrees ! Estimated noise=1075.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 22.63 at -14.89 degrees (North through East) ! Clean map min=-0.0020154 max=0.061284 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=19.99 mas, bpa=-14.3 degrees ! Estimated noise=1596.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0472011 Jy ! Component: 100 - total flux cleaned = 0.0583399 Jy ! Component: 150 - total flux cleaned = 0.0628909 Jy ! Component: 200 - total flux cleaned = 0.0638152 Jy ! Total flux subtracted in 200 components = 0.0638152 Jy ! Clean residual min=-0.003784 max=0.003556 Jy/beam ! Clean residual mean=-0.000004 rms=0.001043 Jy/beam ! Combined flux in latest and established models = 0.0638151 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0638151 Jy ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=22.63 mas, bpa=-14.89 degrees ! Estimated noise=1075.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-82.5, -48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157509 Jy ! Component: 100 - total flux cleaned = 0.00137318 Jy ! Component: 150 - total flux cleaned = 0.00113859 Jy ! Component: 200 - total flux cleaned = 0.000931916 Jy ! Total flux subtracted in 200 components = 0.000931916 Jy ! Clean residual min=-0.002083 max=0.002332 Jy/beam ! Clean residual mean=0.000002 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0647471 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.0647471 Jy ! Inverting map ! Added new window around map position (114.5, 32.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337671 Jy ! Component: 100 - total flux cleaned = 9.56101e-05 Jy ! Component: 150 - total flux cleaned = -0.00016297 Jy ! Component: 200 - total flux cleaned = -0.000398927 Jy ! Total flux subtracted in 200 components = -0.000398927 Jy ! Clean residual min=-0.001915 max=0.001952 Jy/beam ! Clean residual mean=0.000003 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0643481 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 76 components and 0.0643481 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.103 mas, bmaj=29.81 mas, bpa=-6.671 degrees ! Estimated noise=1243.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000414215 Jy ! Component: 100 - total flux cleaned = -0.000622418 Jy ! Component: 150 - total flux cleaned = -0.000876988 Jy ! Component: 200 - total flux cleaned = -0.00114644 Jy ! Total flux subtracted in 200 components = -0.00114644 Jy ! Clean residual min=-0.001976 max=0.001744 Jy/beam ! Clean residual mean=0.000007 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0632017 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000255424 Jy ! Component: 100 - total flux cleaned = -0.000497473 Jy ! Component: 150 - total flux cleaned = -0.000702161 Jy ! Component: 200 - total flux cleaned = -0.000896836 Jy ! Total flux subtracted in 200 components = -0.000896836 Jy ! Clean residual min=-0.001982 max=0.001732 Jy/beam ! Clean residual mean=0.000010 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0623048 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 123 components and 0.0623049 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=22.63 mas, bpa=-14.89 degrees ! Estimated noise=1075.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000328444 Jy ! Component: 100 - total flux cleaned = -0.000487868 Jy ! Component: 150 - total flux cleaned = -0.000452012 Jy ! Component: 200 - total flux cleaned = -0.00045189 Jy ! Total flux subtracted in 200 components = -0.00045189 Jy ! Clean residual min=-0.001800 max=0.001796 Jy/beam ! Clean residual mean=0.000006 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.061853 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 143 components and 0.061853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097525Jy sigma=0.000658 ! Fit after self-cal, rms=0.097546Jy sigma=0.000657 wmodel J0430-2507_S_2017_10_21_pus_map.mod ! Writing 143 model components to file: J0430-2507_S_2017_10_21_pus_map.mod wobs J0430-2507_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0430-2507_S_2017_10_21_pus_uvs.fits wwins J0430-2507_S_2017_10_21_pus_map.win ! wwins: Wrote 3 windows to J0430-2507_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000397039 Jy ! Component: 100 - total flux cleaned = 0.0005831 Jy ! Component: 150 - total flux cleaned = 0.000898756 Jy ! Component: 200 - total flux cleaned = 0.00100807 Jy ! Component: 250 - total flux cleaned = 0.00116455 Jy ! Component: 300 - total flux cleaned = 0.00123916 Jy ! Component: 350 - total flux cleaned = 0.00135902 Jy ! Component: 400 - total flux cleaned = 0.00140478 Jy ! Component: 450 - total flux cleaned = 0.00138212 Jy ! Component: 500 - total flux cleaned = 0.00133845 Jy ! Component: 550 - total flux cleaned = 0.00135949 Jy ! Component: 600 - total flux cleaned = 0.00138015 Jy ! Component: 650 - total flux cleaned = 0.00135969 Jy ! Component: 700 - total flux cleaned = 0.00130043 Jy ! Component: 750 - total flux cleaned = 0.00130054 Jy ! Component: 800 - total flux cleaned = 0.00130021 Jy ! Component: 850 - total flux cleaned = 0.00131864 Jy ! Component: 900 - total flux cleaned = 0.00140955 Jy ! Component: 950 - total flux cleaned = 0.00151685 Jy ! Component: 1000 - total flux cleaned = 0.00158719 Jy ! Component: 1050 - total flux cleaned = 0.00165656 Jy ! Component: 1100 - total flux cleaned = 0.0017419 Jy ! Component: 1150 - total flux cleaned = 0.0017588 Jy ! Component: 1200 - total flux cleaned = 0.00182494 Jy ! Component: 1250 - total flux cleaned = 0.0018575 Jy ! Component: 1300 - total flux cleaned = 0.00187363 Jy ! Component: 1350 - total flux cleaned = 0.00192129 Jy ! Component: 1400 - total flux cleaned = 0.00196807 Jy ! Component: 1450 - total flux cleaned = 0.00198338 Jy ! Component: 1500 - total flux cleaned = 0.00201354 Jy ! Component: 1550 - total flux cleaned = 0.0020585 Jy ! Component: 1600 - total flux cleaned = 0.00210282 Jy ! Component: 1650 - total flux cleaned = 0.0021465 Jy ! Component: 1700 - total flux cleaned = 0.00217508 Jy ! Component: 1750 - total flux cleaned = 0.00221764 Jy ! Component: 1800 - total flux cleaned = 0.0022458 Jy ! Component: 1850 - total flux cleaned = 0.00225966 Jy ! Component: 1900 - total flux cleaned = 0.00228737 Jy ! Component: 1950 - total flux cleaned = 0.00231467 Jy ! Component: 2000 - total flux cleaned = 0.00234166 Jy ! Component: 2050 - total flux cleaned = 0.0023818 Jy ! Component: 2100 - total flux cleaned = 0.00235533 Jy ! Component: 2150 - total flux cleaned = 0.0023553 Jy ! Component: 2200 - total flux cleaned = 0.00238131 Jy ! Component: 2250 - total flux cleaned = 0.00241986 Jy ! Component: 2300 - total flux cleaned = 0.0024198 Jy ! Component: 2350 - total flux cleaned = 0.00239449 Jy ! Component: 2400 - total flux cleaned = 0.00241974 Jy ! Component: 2450 - total flux cleaned = 0.00243232 Jy ! Component: 2500 - total flux cleaned = 0.00248177 Jy ! Component: 2550 - total flux cleaned = 0.00249393 Jy ! Component: 2600 - total flux cleaned = 0.00254254 Jy ! Component: 2650 - total flux cleaned = 0.00255452 Jy ! Component: 2700 - total flux cleaned = 0.00257846 Jy ! Component: 2750 - total flux cleaned = 0.00263795 Jy ! Component: 2800 - total flux cleaned = 0.00269695 Jy ! Component: 2850 - total flux cleaned = 0.00270869 Jy ! Component: 2900 - total flux cleaned = 0.0027555 Jy ! Component: 2950 - total flux cleaned = 0.00281348 Jy ! Component: 3000 - total flux cleaned = 0.0028942 Jy ! Component: 3050 - total flux cleaned = 0.00294004 Jy ! Component: 3100 - total flux cleaned = 0.00297426 Jy ! Component: 3150 - total flux cleaned = 0.00301991 Jy ! Component: 3200 - total flux cleaned = 0.00304266 Jy ! Component: 3250 - total flux cleaned = 0.00309953 Jy ! Component: 3300 - total flux cleaned = 0.0031222 Jy ! Component: 3350 - total flux cleaned = 0.00315624 Jy ! Component: 3400 - total flux cleaned = 0.00316761 Jy ! Component: 3450 - total flux cleaned = 0.00320166 Jy ! Component: 3500 - total flux cleaned = 0.0032357 Jy ! Component: 3550 - total flux cleaned = 0.00320172 Jy ! Component: 3600 - total flux cleaned = 0.00323577 Jy ! Component: 3650 - total flux cleaned = 0.00319038 Jy ! Component: 3700 - total flux cleaned = 0.00319034 Jy ! Component: 3750 - total flux cleaned = 0.0032131 Jy ! Component: 3800 - total flux cleaned = 0.00319031 Jy ! Component: 3850 - total flux cleaned = 0.003156 Jy ! Component: 3900 - total flux cleaned = 0.00314456 Jy ! Component: 3950 - total flux cleaned = 0.00311012 Jy ! Component: 4000 - total flux cleaned = 0.00309859 Jy ! Component: 4050 - total flux cleaned = 0.00308701 Jy ! Total flux subtracted in 4096 components = 0.00307543 Jy ! Clean residual min=-0.000787 max=0.000649 Jy/beam ! Clean residual mean=0.000005 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.0649284 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 430 components and 0.0649284 Jy ![Exited script file: muppet] wmap "J0430-2507_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 22.63 at -14.89 degrees (North through East) ! Clean map min=-0.0022655 max=0.059515 Jy/beam ! Writing clean map to FITS file: J0430-2507_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0595148 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226139 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.13991 1.13991 2.27983 4.55966 9.11932 18.2386 36.4773 72.9546 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 22.63 at -14.89 degrees (North through East) ! Clean map min=-0.0022655 max=0.059515 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0430-2507_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:24 2019