! Started logfile: J0430-2507_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:32 2019 obs J0430-2507_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0430-2507_S_2017_04_28_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.847661 visibilities/baseline/integration-bin. ! Found source: J0430-2507 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 11596 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0430-2507_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 83 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 427 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.017874Jy sigma=0.011197 ! Fit after self-cal, rms=0.949642Jy sigma=0.011025 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.6 mas, bmaj=6.779 mas, bpa=-5.344 degrees ! Estimated noise=1722.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0455637 Jy ! Component: 100 - total flux cleaned = 0.0559774 Jy ! Total flux subtracted in 100 components = 0.0559774 Jy ! Clean residual min=-0.009811 max=0.011522 Jy/beam ! Clean residual mean=-0.000009 rms=0.003037 Jy/beam ! Combined flux in latest and established models = 0.0559774 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0559774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218329Jy sigma=0.000818 ! Fit after self-cal, rms=0.217514Jy sigma=0.000801 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.095 mas, bmaj=7.731 mas, bpa=-2.947 degrees ! Estimated noise=1210.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752166 Jy ! Component: 100 - total flux cleaned = 0.0109946 Jy ! Component: 150 - total flux cleaned = 0.012649 Jy ! Component: 200 - total flux cleaned = 0.0129105 Jy ! Total flux subtracted in 200 components = 0.0129105 Jy ! Clean residual min=-0.006686 max=0.007987 Jy/beam ! Clean residual mean=-0.000033 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.0688879 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 0.0688879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.216882Jy sigma=0.000819 ! Fit after self-cal, rms=0.216922Jy sigma=0.000819 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00 HN 0.90 KP 0.99 ! LA 0.91 MK 0.96 NL 1.04 OV 1.09 ! PT 0.99 SC 0.84 ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.96 HN 0.87 KP 1.01 ! LA 0.91 MK 1.07 NL 1.05 OV 1.09 ! PT 0.95 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.97 HN 0.92 KP 0.94 ! LA 0.85 MK 0.96 NL 1.03 OV 0.97 ! PT 1.04 SC 0.96 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 16.43 FD 1.00 HN 0.69 KP 1.00* ! LA 0.54 MK 1.00 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.216922Jy sigma=0.000819 ! Fit after self-cal, rms=1.580025Jy sigma=0.000634 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.016 mas, bmaj=7.702 mas, bpa=-1.643 degrees ! Estimated noise=1244.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00087648 Jy ! Component: 100 - total flux cleaned = 0.000874398 Jy ! Component: 150 - total flux cleaned = 0.000872794 Jy ! Component: 200 - total flux cleaned = 0.000824679 Jy ! Total flux subtracted in 200 components = 0.000824679 Jy ! Clean residual min=-0.003557 max=0.003313 Jy/beam ! Clean residual mean=-0.000013 rms=0.000820 Jy/beam ! Combined flux in latest and established models = 0.0697125 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 19 components and 0.0697125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.579924Jy sigma=0.000634 ! Fit after self-cal, rms=1.579891Jy sigma=0.000632 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.579891Jy sigma=0.000632 ! Fit after self-cal, rms=2.055007Jy sigma=0.000631 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.993 mas, bmaj=7.657 mas, bpa=-2.023 degrees ! Estimated noise=1236.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00084155 Jy ! Component: 100 - total flux cleaned = 0.00087919 Jy ! Component: 150 - total flux cleaned = 0.000811319 Jy ! Component: 200 - total flux cleaned = 0.000751753 Jy ! Total flux subtracted in 200 components = 0.000751753 Jy ! Clean residual min=-0.003235 max=0.002957 Jy/beam ! Clean residual mean=-0.000017 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 0.0704643 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0704643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.054955Jy sigma=0.000630 ! Fit after self-cal, rms=2.054926Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000265296 Jy ! Component: 100 - total flux cleaned = -0.000368651 Jy ! Component: 150 - total flux cleaned = -0.000400937 Jy ! Component: 200 - total flux cleaned = -0.000460157 Jy ! Total flux subtracted in 200 components = -0.000460157 Jy ! Clean residual min=-0.003241 max=0.002994 Jy/beam ! Clean residual mean=-0.000019 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0700042 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.0700042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.054898Jy sigma=0.000630 ! Fit after self-cal, rms=2.054895Jy sigma=0.000630 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.054895Jy sigma=0.000630 ! Fit after self-cal, rms=2.326705Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.977 mas, bmaj=7.633 mas, bpa=-2.162 degrees ! Estimated noise=1238.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000327095 Jy ! Component: 100 - total flux cleaned = 0.000360673 Jy ! Component: 150 - total flux cleaned = 0.00030115 Jy ! Component: 200 - total flux cleaned = 0.000249178 Jy ! Total flux subtracted in 200 components = 0.000249178 Jy ! Clean residual min=-0.003105 max=0.003023 Jy/beam ! Clean residual mean=-0.000018 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.0702533 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.0702534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.326671Jy sigma=0.000630 ! Fit after self-cal, rms=2.326662Jy sigma=0.000630 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277577 Jy ! Component: 100 - total flux cleaned = -0.000304743 Jy ! Component: 150 - total flux cleaned = -0.000355998 Jy ! Component: 200 - total flux cleaned = -0.000402284 Jy ! Total flux subtracted in 200 components = -0.000402284 Jy ! Clean residual min=-0.003118 max=0.003040 Jy/beam ! Clean residual mean=-0.000019 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 0.0698511 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0698511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.326646Jy sigma=0.000630 ! Fit after self-cal, rms=2.326642Jy sigma=0.000630 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.326642Jy sigma=0.000630 ! Fit after self-cal, rms=2.469806Jy sigma=0.000630 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.381 mas, bmaj=17.41 mas, bpa=4.605 degrees ! Estimated noise=1672.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000342915 Jy ! Component: 100 - total flux cleaned = 0.000389122 Jy ! Component: 150 - total flux cleaned = 0.000406953 Jy ! Component: 200 - total flux cleaned = 0.00042245 Jy ! Total flux subtracted in 200 components = 0.00042245 Jy ! Clean residual min=-0.002914 max=0.002519 Jy/beam ! Clean residual mean=-0.000042 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0702735 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 41 components and 0.0702735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.469757Jy sigma=0.000630 ! Fit after self-cal, rms=2.469746Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215289 Jy ! Component: 100 - total flux cleaned = -0.000213179 Jy ! Component: 150 - total flux cleaned = -0.000198275 Jy ! Component: 200 - total flux cleaned = -0.000222506 Jy ! Total flux subtracted in 200 components = -0.000222506 Jy ! Clean residual min=-0.002928 max=0.002408 Jy/beam ! Clean residual mean=-0.000041 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.070051 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.070051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.469714Jy sigma=0.000629 ! Fit after self-cal, rms=2.469707Jy sigma=0.000629 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.626 mas, bpa=-2.217 degrees ! Estimated noise=1243.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.967 x 7.626 at -2.217 degrees (North through East) ! Clean map min=-0.002877 max=0.064008 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=6.629 mas, bpa=-4.559 degrees ! Estimated noise=1816.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0502449 Jy ! Component: 100 - total flux cleaned = 0.0622857 Jy ! Component: 150 - total flux cleaned = 0.0679766 Jy ! Component: 200 - total flux cleaned = 0.0708526 Jy ! Total flux subtracted in 200 components = 0.0708526 Jy ! Clean residual min=-0.004952 max=0.004321 Jy/beam ! Clean residual mean=-0.000008 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.0708525 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 0.0708525 Jy ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.626 mas, bpa=-2.217 degrees ! Estimated noise=1243.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177875 Jy ! Component: 100 - total flux cleaned = -0.00182604 Jy ! Component: 150 - total flux cleaned = -0.00178926 Jy ! Component: 200 - total flux cleaned = -0.00175817 Jy ! Total flux subtracted in 200 components = -0.00175817 Jy ! Clean residual min=-0.003049 max=0.003030 Jy/beam ! Clean residual mean=-0.000020 rms=0.000716 Jy/beam ! Combined flux in latest and established models = 0.0690944 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0690944 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.381 mas, bmaj=17.41 mas, bpa=4.605 degrees ! Estimated noise=1672.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000334337 Jy ! Component: 100 - total flux cleaned = 0.000385752 Jy ! Component: 150 - total flux cleaned = 0.000405241 Jy ! Component: 200 - total flux cleaned = 0.00042122 Jy ! Total flux subtracted in 200 components = 0.00042122 Jy ! Clean residual min=-0.002979 max=0.002416 Jy/beam ! Clean residual mean=-0.000042 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0695156 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.41571e-05 Jy ! Component: 100 - total flux cleaned = 3.57083e-05 Jy ! Component: 150 - total flux cleaned = 2.59675e-05 Jy ! Component: 200 - total flux cleaned = 3.54194e-05 Jy ! Total flux subtracted in 200 components = 3.54194e-05 Jy ! Clean residual min=-0.002961 max=0.002412 Jy/beam ! Clean residual mean=-0.000042 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.069551 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.069551 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.967 mas, bmaj=7.626 mas, bpa=-2.217 degrees ! Estimated noise=1243.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.75409e-05 Jy ! Component: 100 - total flux cleaned = -8.14151e-05 Jy ! Component: 150 - total flux cleaned = -0.000106751 Jy ! Component: 200 - total flux cleaned = -0.000151891 Jy ! Total flux subtracted in 200 components = -0.000151891 Jy ! Clean residual min=-0.003098 max=0.003013 Jy/beam ! Clean residual mean=-0.000019 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.0693991 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 55 components and 0.0693992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.469678Jy sigma=0.000629 ! Fit after self-cal, rms=2.469675Jy sigma=0.000629 wmodel J0430-2507_S_2017_04_28_pus_map.mod ! Writing 55 model components to file: J0430-2507_S_2017_04_28_pus_map.mod wobs J0430-2507_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0430-2507_S_2017_04_28_pus_uvs.fits wwins J0430-2507_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0430-2507_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000720636 Jy ! Component: 100 - total flux cleaned = -0.00133646 Jy ! Component: 150 - total flux cleaned = -0.00195735 Jy ! Component: 200 - total flux cleaned = -0.00259462 Jy ! Component: 250 - total flux cleaned = -0.00307699 Jy ! Component: 300 - total flux cleaned = -0.00354388 Jy ! Component: 350 - total flux cleaned = -0.00379042 Jy ! Component: 400 - total flux cleaned = -0.00402955 Jy ! Component: 450 - total flux cleaned = -0.00418446 Jy ! Component: 500 - total flux cleaned = -0.00433722 Jy ! Component: 550 - total flux cleaned = -0.00459734 Jy ! Component: 600 - total flux cleaned = -0.0047423 Jy ! Component: 650 - total flux cleaned = -0.00484868 Jy ! Component: 700 - total flux cleaned = -0.00495311 Jy ! Component: 750 - total flux cleaned = -0.00505555 Jy ! Component: 800 - total flux cleaned = -0.00508904 Jy ! Component: 850 - total flux cleaned = -0.0051872 Jy ! Component: 900 - total flux cleaned = -0.00528334 Jy ! Component: 950 - total flux cleaned = -0.00537888 Jy ! Component: 1000 - total flux cleaned = -0.00553471 Jy ! Component: 1050 - total flux cleaned = -0.00565743 Jy ! Component: 1100 - total flux cleaned = -0.00577795 Jy ! Component: 1150 - total flux cleaned = -0.00577739 Jy ! Component: 1200 - total flux cleaned = -0.00592423 Jy ! Component: 1250 - total flux cleaned = -0.00601063 Jy ! Component: 1300 - total flux cleaned = -0.00609626 Jy ! Component: 1350 - total flux cleaned = -0.00618075 Jy ! Component: 1400 - total flux cleaned = -0.00620887 Jy ! Component: 1450 - total flux cleaned = -0.006291 Jy ! Component: 1500 - total flux cleaned = -0.00634514 Jy ! Component: 1550 - total flux cleaned = -0.00642586 Jy ! Component: 1600 - total flux cleaned = -0.00647883 Jy ! Component: 1650 - total flux cleaned = -0.00660898 Jy ! Component: 1700 - total flux cleaned = -0.00655671 Jy ! Component: 1750 - total flux cleaned = -0.0065824 Jy ! Component: 1800 - total flux cleaned = -0.00665817 Jy ! Component: 1850 - total flux cleaned = -0.00668331 Jy ! Component: 1900 - total flux cleaned = -0.00673304 Jy ! Component: 1950 - total flux cleaned = -0.00687976 Jy ! Component: 2000 - total flux cleaned = -0.0068317 Jy ! Component: 2050 - total flux cleaned = -0.00695182 Jy ! Component: 2100 - total flux cleaned = -0.00704697 Jy ! Component: 2150 - total flux cleaned = -0.00716491 Jy ! Component: 2200 - total flux cleaned = -0.00711847 Jy ! Component: 2250 - total flux cleaned = -0.00723413 Jy ! Component: 2300 - total flux cleaned = -0.00721145 Jy ! Component: 2350 - total flux cleaned = -0.00734715 Jy ! Component: 2400 - total flux cleaned = -0.00734718 Jy ! Component: 2450 - total flux cleaned = -0.00741431 Jy ! Component: 2500 - total flux cleaned = -0.00739216 Jy ! Component: 2550 - total flux cleaned = -0.0074799 Jy ! Component: 2600 - total flux cleaned = -0.00754507 Jy ! Component: 2650 - total flux cleaned = -0.0076743 Jy ! Component: 2700 - total flux cleaned = -0.00769535 Jy ! Component: 2750 - total flux cleaned = -0.00771648 Jy ! Component: 2800 - total flux cleaned = -0.00777954 Jy ! Component: 2850 - total flux cleaned = -0.0079253 Jy ! Component: 2900 - total flux cleaned = -0.00792505 Jy ! Component: 2950 - total flux cleaned = -0.00796613 Jy ! Component: 3000 - total flux cleaned = -0.00800676 Jy ! Component: 3050 - total flux cleaned = -0.00808792 Jy ! Component: 3100 - total flux cleaned = -0.00818831 Jy ! Component: 3150 - total flux cleaned = -0.00830771 Jy ! Component: 3200 - total flux cleaned = -0.00846558 Jy ! Component: 3250 - total flux cleaned = -0.00854359 Jy ! Component: 3300 - total flux cleaned = -0.00862127 Jy ! Component: 3350 - total flux cleaned = -0.00866001 Jy ! Component: 3400 - total flux cleaned = -0.00879394 Jy ! Component: 3450 - total flux cleaned = -0.00888905 Jy ! Component: 3500 - total flux cleaned = -0.00887034 Jy ! Component: 3550 - total flux cleaned = -0.00902017 Jy ! Component: 3600 - total flux cleaned = -0.00913162 Jy ! Component: 3650 - total flux cleaned = -0.00920544 Jy ! Component: 3700 - total flux cleaned = -0.00924214 Jy ! Component: 3750 - total flux cleaned = -0.00938788 Jy ! Component: 3800 - total flux cleaned = -0.00949644 Jy ! Component: 3850 - total flux cleaned = -0.00953242 Jy ! Component: 3900 - total flux cleaned = -0.00958569 Jy ! Component: 3950 - total flux cleaned = -0.00963862 Jy ! Component: 4000 - total flux cleaned = -0.00969144 Jy ! Component: 4050 - total flux cleaned = -0.00977865 Jy ! Total flux subtracted in 4096 components = -0.00977861 Jy ! Clean residual min=-0.001233 max=0.001003 Jy/beam ! Clean residual mean=-0.000008 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0596206 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 350 components and 0.0596206 Jy ![Exited script file: muppet] wmap "J0430-2507_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.967 x 7.626 at -2.217 degrees (North through East) ! Clean map min=-0.0024085 max=0.064616 Jy/beam ! Writing clean map to FITS file: J0430-2507_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0646157 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000318763 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.47996 1.47996 2.95993 5.91986 11.8397 23.6794 47.3589 94.7177 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.064 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.967 x 7.626 at -2.217 degrees (North through East) ! Clean map min=-0.0024085 max=0.064616 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0430-2507_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:36 2019