! Started logfile: J0430-0523_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:31:30 2019 obs J0430-0523_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0430-0523_S_2017_03_27_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.899902 visibilities/baseline/integration-bin. ! Found source: J0430-0523 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 18304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0430-0523_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 72 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 398 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978195Jy sigma=0.008104 ! Fit after self-cal, rms=0.946770Jy sigma=0.007866 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.566 mas, bmaj=6.793 mas, bpa=-3.394 degrees ! Estimated noise=902.301 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443512 Jy ! Component: 100 - total flux cleaned = 0.0541425 Jy ! Total flux subtracted in 100 components = 0.0541425 Jy ! Clean residual min=-0.003710 max=0.004172 Jy/beam ! Clean residual mean=0.000011 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.0541425 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0541425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089065Jy sigma=0.000687 ! Fit after self-cal, rms=0.088551Jy sigma=0.000682 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=7.84 mas, bpa=-2.455 degrees ! Estimated noise=698.198 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348293 Jy ! Component: 100 - total flux cleaned = 0.00494981 Jy ! Component: 150 - total flux cleaned = 0.0056597 Jy ! Component: 200 - total flux cleaned = 0.00583064 Jy ! Total flux subtracted in 200 components = 0.00583064 Jy ! Clean residual min=-0.002325 max=0.001958 Jy/beam ! Clean residual mean=0.000008 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0599732 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.0599732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088399Jy sigma=0.000681 ! Fit after self-cal, rms=0.088401Jy sigma=0.000681 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 1.14 KP 1.03 ! LA 0.94 MK 1.03 NL 1.02 OV 1.05 ! PT 1.02 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.02 HN 1.06 KP 0.97 ! LA 1.02 MK 0.98 NL 1.02 OV 1.14 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.97 KP 0.96 ! LA 1.01 MK 1.06 NL 1.06 OV 1.00 ! PT 1.05 SC 1.03 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 1.01 HN 0.92 KP 1.00* ! LA 0.75 MK 0.96 NL 1.00* OV 0.76 ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.088401Jy sigma=0.000681 ! Fit after self-cal, rms=0.086564Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=7.866 mas, bpa=-2.573 degrees ! Estimated noise=698.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000164388 Jy ! Component: 100 - total flux cleaned = 0.000164703 Jy ! Component: 150 - total flux cleaned = 0.000165069 Jy ! Component: 200 - total flux cleaned = 0.000154881 Jy ! Total flux subtracted in 200 components = 0.000154881 Jy ! Clean residual min=-0.002368 max=0.002045 Jy/beam ! Clean residual mean=0.000003 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.060128 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 36 components and 0.060128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086560Jy sigma=0.000678 ! Fit after self-cal, rms=0.086569Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086569Jy sigma=0.000678 ! Fit after self-cal, rms=0.087387Jy sigma=0.000675 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=7.854 mas, bpa=-2.419 degrees ! Estimated noise=707.091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000662696 Jy ! Component: 100 - total flux cleaned = 0.00072437 Jy ! Component: 150 - total flux cleaned = 0.000715717 Jy ! Component: 200 - total flux cleaned = 0.000708234 Jy ! Total flux subtracted in 200 components = 0.000708234 Jy ! Clean residual min=-0.002025 max=0.001831 Jy/beam ! Clean residual mean=0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0608363 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 37 components and 0.0608363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087381Jy sigma=0.000675 ! Fit after self-cal, rms=0.087463Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.04837e-06 Jy ! Component: 100 - total flux cleaned = -2.4105e-05 Jy ! Component: 150 - total flux cleaned = -2.38306e-05 Jy ! Component: 200 - total flux cleaned = -2.38745e-05 Jy ! Total flux subtracted in 200 components = -2.38745e-05 Jy ! Clean residual min=-0.001985 max=0.001697 Jy/beam ! Clean residual mean=0.000002 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0608124 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0608124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087461Jy sigma=0.000675 ! Fit after self-cal, rms=0.087461Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087461Jy sigma=0.000675 ! Fit after self-cal, rms=0.089084Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.157 mas, bmaj=7.859 mas, bpa=-2.47 degrees ! Estimated noise=707.781 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.54206e-05 Jy ! Component: 100 - total flux cleaned = -2.76358e-05 Jy ! Component: 150 - total flux cleaned = -1.18329e-05 Jy ! Component: 200 - total flux cleaned = 2.54414e-06 Jy ! Total flux subtracted in 200 components = 2.54414e-06 Jy ! Clean residual min=-0.001815 max=0.001735 Jy/beam ! Clean residual mean=0.000002 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0608149 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 42 components and 0.0608149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089081Jy sigma=0.000674 ! Fit after self-cal, rms=0.089225Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.2519e-05 Jy ! Component: 100 - total flux cleaned = -6.13231e-05 Jy ! Component: 150 - total flux cleaned = -5.37964e-05 Jy ! Component: 200 - total flux cleaned = -4.66058e-05 Jy ! Total flux subtracted in 200 components = -4.66058e-05 Jy ! Clean residual min=-0.001837 max=0.001682 Jy/beam ! Clean residual mean=0.000002 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0607683 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 45 components and 0.0607683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089223Jy sigma=0.000674 ! Fit after self-cal, rms=0.089224Jy sigma=0.000674 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089224Jy sigma=0.000674 ! Fit after self-cal, rms=0.090364Jy sigma=0.000674 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=13.16 mas, bpa=4.216 degrees ! Estimated noise=892.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.23877e-05 Jy ! Component: 100 - total flux cleaned = 8.93368e-05 Jy ! Component: 150 - total flux cleaned = 0.00012522 Jy ! Component: 200 - total flux cleaned = 0.000146041 Jy ! Total flux subtracted in 200 components = 0.000146041 Jy ! Clean residual min=-0.002104 max=0.001822 Jy/beam ! Clean residual mean=0.000004 rms=0.000518 Jy/beam ! Combined flux in latest and established models = 0.0609144 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.0609144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090364Jy sigma=0.000674 ! Fit after self-cal, rms=0.090481Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.06599e-05 Jy ! Component: 100 - total flux cleaned = -1.82944e-05 Jy ! Component: 150 - total flux cleaned = -7.09583e-07 Jy ! Component: 200 - total flux cleaned = 6.38757e-06 Jy ! Total flux subtracted in 200 components = 6.38757e-06 Jy ! Clean residual min=-0.002040 max=0.001851 Jy/beam ! Clean residual mean=0.000003 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.0609208 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 55 components and 0.0609208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090481Jy sigma=0.000673 ! Fit after self-cal, rms=0.090469Jy sigma=0.000673 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=7.867 mas, bpa=-2.526 degrees ! Estimated noise=708.852 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 7.867 at -2.526 degrees (North through East) ! Clean map min=-0.0016622 max=0.057611 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.602 mas, bmaj=6.844 mas, bpa=-3.811 degrees ! Estimated noise=906.497 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0445279 Jy ! Component: 100 - total flux cleaned = 0.0544805 Jy ! Component: 150 - total flux cleaned = 0.0580574 Jy ! Component: 200 - total flux cleaned = 0.0594779 Jy ! Total flux subtracted in 200 components = 0.0594779 Jy ! Clean residual min=-0.002192 max=0.002318 Jy/beam ! Clean residual mean=0.000004 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0594779 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0594779 Jy ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=7.867 mas, bpa=-2.526 degrees ! Estimated noise=708.852 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000661062 Jy ! Component: 100 - total flux cleaned = 0.000882695 Jy ! Component: 150 - total flux cleaned = 0.0010601 Jy ! Component: 200 - total flux cleaned = 0.00118671 Jy ! Total flux subtracted in 200 components = 0.00118671 Jy ! Clean residual min=-0.001648 max=0.001669 Jy/beam ! Clean residual mean=0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0606646 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.0606646 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.683 mas, bmaj=13.16 mas, bpa=4.216 degrees ! Estimated noise=892.782 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000268185 Jy ! Component: 100 - total flux cleaned = 0.000268145 Jy ! Component: 150 - total flux cleaned = 0.000276891 Jy ! Component: 200 - total flux cleaned = 0.000277147 Jy ! Total flux subtracted in 200 components = 0.000277147 Jy ! Clean residual min=-0.001973 max=0.001839 Jy/beam ! Clean residual mean=0.000003 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.0609418 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.75262e-07 Jy ! Component: 100 - total flux cleaned = -1.66228e-07 Jy ! Component: 150 - total flux cleaned = -1.20393e-07 Jy ! Component: 200 - total flux cleaned = -3.91357e-06 Jy ! Total flux subtracted in 200 components = -3.91357e-06 Jy ! Clean residual min=-0.001975 max=0.001845 Jy/beam ! Clean residual mean=0.000003 rms=0.000519 Jy/beam ! Combined flux in latest and established models = 0.0609378 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 25 components and 0.0609378 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.156 mas, bmaj=7.867 mas, bpa=-2.526 degrees ! Estimated noise=708.852 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000215723 Jy ! Component: 100 - total flux cleaned = -0.000261324 Jy ! Component: 150 - total flux cleaned = -0.000260964 Jy ! Component: 200 - total flux cleaned = -0.000249986 Jy ! Total flux subtracted in 200 components = -0.000249986 Jy ! Clean residual min=-0.001653 max=0.001653 Jy/beam ! Clean residual mean=0.000002 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0606879 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0606879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090469Jy sigma=0.000673 ! Fit after self-cal, rms=0.090472Jy sigma=0.000673 wmodel J0430-0523_S_2017_03_27_pus_map.mod ! Writing 32 model components to file: J0430-0523_S_2017_03_27_pus_map.mod wobs J0430-0523_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0430-0523_S_2017_03_27_pus_uvs.fits wwins J0430-0523_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0430-0523_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504831 Jy ! Component: 100 - total flux cleaned = 0.000798922 Jy ! Component: 150 - total flux cleaned = 0.00110849 Jy ! Component: 200 - total flux cleaned = 0.00132579 Jy ! Component: 250 - total flux cleaned = 0.00151019 Jy ! Component: 300 - total flux cleaned = 0.00166358 Jy ! Component: 350 - total flux cleaned = 0.00183812 Jy ! Component: 400 - total flux cleaned = 0.00195924 Jy ! Component: 450 - total flux cleaned = 0.00210202 Jy ! Component: 500 - total flux cleaned = 0.00221891 Jy ! Component: 550 - total flux cleaned = 0.0023115 Jy ! Component: 600 - total flux cleaned = 0.0024478 Jy ! Component: 650 - total flux cleaned = 0.00260415 Jy ! Component: 700 - total flux cleaned = 0.00273621 Jy ! Component: 750 - total flux cleaned = 0.00284444 Jy ! Component: 800 - total flux cleaned = 0.00297275 Jy ! Component: 850 - total flux cleaned = 0.00305752 Jy ! Component: 900 - total flux cleaned = 0.00312053 Jy ! Component: 950 - total flux cleaned = 0.00322428 Jy ! Component: 1000 - total flux cleaned = 0.0032858 Jy ! Component: 1050 - total flux cleaned = 0.00334623 Jy ! Component: 1100 - total flux cleaned = 0.00340627 Jy ! Component: 1150 - total flux cleaned = 0.00344566 Jy ! Component: 1200 - total flux cleaned = 0.00344565 Jy ! Component: 1250 - total flux cleaned = 0.0035621 Jy ! Component: 1300 - total flux cleaned = 0.00361948 Jy ! Component: 1350 - total flux cleaned = 0.00361939 Jy ! Component: 1400 - total flux cleaned = 0.00365691 Jy ! Component: 1450 - total flux cleaned = 0.00375052 Jy ! Component: 1500 - total flux cleaned = 0.00384298 Jy ! Component: 1550 - total flux cleaned = 0.00389772 Jy ! Component: 1600 - total flux cleaned = 0.00389754 Jy ! Component: 1650 - total flux cleaned = 0.00386175 Jy ! Component: 1700 - total flux cleaned = 0.00398644 Jy ! Component: 1750 - total flux cleaned = 0.00396882 Jy ! Component: 1800 - total flux cleaned = 0.00402104 Jy ! Component: 1850 - total flux cleaned = 0.00403837 Jy ! Component: 1900 - total flux cleaned = 0.00402113 Jy ! Component: 1950 - total flux cleaned = 0.00412341 Jy ! Component: 2000 - total flux cleaned = 0.00405532 Jy ! Component: 2050 - total flux cleaned = 0.00405524 Jy ! Component: 2100 - total flux cleaned = 0.0040384 Jy ! Component: 2150 - total flux cleaned = 0.00405517 Jy ! Component: 2200 - total flux cleaned = 0.00413756 Jy ! Component: 2250 - total flux cleaned = 0.00417007 Jy ! Component: 2300 - total flux cleaned = 0.00418616 Jy ! Component: 2350 - total flux cleaned = 0.00417023 Jy ! Component: 2400 - total flux cleaned = 0.00417012 Jy ! Component: 2450 - total flux cleaned = 0.00421767 Jy ! Component: 2500 - total flux cleaned = 0.00424927 Jy ! Component: 2550 - total flux cleaned = 0.00428051 Jy ! Component: 2600 - total flux cleaned = 0.00428052 Jy ! Component: 2650 - total flux cleaned = 0.00432671 Jy ! Component: 2700 - total flux cleaned = 0.00432665 Jy ! Component: 2750 - total flux cleaned = 0.0043114 Jy ! Component: 2800 - total flux cleaned = 0.00428125 Jy ! Component: 2850 - total flux cleaned = 0.00437139 Jy ! Component: 2900 - total flux cleaned = 0.00435647 Jy ! Component: 2950 - total flux cleaned = 0.0044307 Jy ! Component: 3000 - total flux cleaned = 0.00443084 Jy ! Component: 3050 - total flux cleaned = 0.00441624 Jy ! Component: 3100 - total flux cleaned = 0.00443096 Jy ! Component: 3150 - total flux cleaned = 0.00450347 Jy ! Component: 3200 - total flux cleaned = 0.00450352 Jy ! Component: 3250 - total flux cleaned = 0.00454633 Jy ! Component: 3300 - total flux cleaned = 0.00463135 Jy ! Component: 3350 - total flux cleaned = 0.00464522 Jy ! Component: 3400 - total flux cleaned = 0.00468708 Jy ! Component: 3450 - total flux cleaned = 0.00468696 Jy ! Component: 3500 - total flux cleaned = 0.00470079 Jy ! Component: 3550 - total flux cleaned = 0.00465952 Jy ! Component: 3600 - total flux cleaned = 0.00467318 Jy ! Component: 3650 - total flux cleaned = 0.00475476 Jy ! Component: 3700 - total flux cleaned = 0.00468702 Jy ! Component: 3750 - total flux cleaned = 0.0047409 Jy ! Component: 3800 - total flux cleaned = 0.00474081 Jy ! Component: 3850 - total flux cleaned = 0.00467443 Jy ! Component: 3900 - total flux cleaned = 0.00468763 Jy ! Component: 3950 - total flux cleaned = 0.00471395 Jy ! Component: 4000 - total flux cleaned = 0.00470089 Jy ! Component: 4050 - total flux cleaned = 0.00470086 Jy ! Total flux subtracted in 4096 components = 0.00464925 Jy ! Clean residual min=-0.000765 max=0.000699 Jy/beam ! Clean residual mean=0.000001 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0653371 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 314 components and 0.0653372 Jy ![Exited script file: muppet] wmap "J0430-0523_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 7.867 at -2.526 degrees (North through East) ! Clean map min=-0.0012555 max=0.057476 Jy/beam ! Writing clean map to FITS file: J0430-0523_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0574762 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000240437 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25497 1.25497 2.50995 5.01989 10.0398 20.0796 40.1591 80.3183 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.156 x 7.867 at -2.526 degrees (North through East) ! Clean map min=-0.0012555 max=0.057476 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0430-0523_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:31:35 2019