! Started logfile: J0429+6710_S_2017_07_09_pus_uvs.log on Wed May 8 14:41:54 2019 obs J0429+6710_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0429+6710_S_2017_07_09_pus_uva.fits ! AN table 1: 218 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.982161 visibilities/baseline/integration-bin. ! Found source: J0429+6710 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 38540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0429+6710_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 67 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1114 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929935Jy sigma=0.008706 ! Fit after self-cal, rms=0.909392Jy sigma=0.008523 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=3.603 mas, bpa=24.49 degrees ! Estimated noise=867.756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0542087 Jy ! Component: 100 - total flux cleaned = 0.0847674 Jy ! Total flux subtracted in 100 components = 0.0847674 Jy ! Clean residual min=-0.007504 max=0.019799 Jy/beam ! Clean residual mean=-0.000118 rms=0.002584 Jy/beam ! Combined flux in latest and established models = 0.0847674 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.0847674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119349Jy sigma=0.001151 ! Fit after self-cal, rms=0.119011Jy sigma=0.001148 ! Inverting map ! Added new window around map position (-4.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249398 Jy ! Component: 100 - total flux cleaned = 0.0437678 Jy ! Total flux subtracted in 100 components = 0.0437678 Jy ! Clean residual min=-0.007083 max=0.014075 Jy/beam ! Clean residual mean=-0.000097 rms=0.002164 Jy/beam ! Combined flux in latest and established models = 0.128535 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 64 components and 0.128535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105396Jy sigma=0.001006 ! Fit after self-cal, rms=0.105069Jy sigma=0.001004 ! Inverting map ! Added new window around map position (-3.5, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176895 Jy ! Component: 100 - total flux cleaned = 0.0317529 Jy ! Total flux subtracted in 100 components = 0.0317529 Jy ! Clean residual min=-0.006762 max=0.011631 Jy/beam ! Clean residual mean=-0.000084 rms=0.001903 Jy/beam ! Combined flux in latest and established models = 0.160288 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 93 components and 0.160288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097211Jy sigma=0.000921 ! Fit after self-cal, rms=0.096954Jy sigma=0.000919 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.865 mas, bmaj=4.481 mas, bpa=27.27 degrees ! Estimated noise=437.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308742 Jy ! Component: 100 - total flux cleaned = 0.0527615 Jy ! Component: 150 - total flux cleaned = 0.068684 Jy ! Component: 200 - total flux cleaned = 0.0803186 Jy ! Total flux subtracted in 200 components = 0.0803186 Jy ! Clean residual min=-0.007878 max=0.014614 Jy/beam ! Clean residual mean=-0.000148 rms=0.002291 Jy/beam ! Combined flux in latest and established models = 0.240607 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 138 components and 0.240607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084547Jy sigma=0.000785 ! Fit after self-cal, rms=0.083747Jy sigma=0.000777 ! Inverting map ! Added new window around map position (3.5, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145578 Jy ! Component: 100 - total flux cleaned = 0.0246411 Jy ! Component: 150 - total flux cleaned = 0.0323091 Jy ! Component: 200 - total flux cleaned = 0.0382989 Jy ! Total flux subtracted in 200 components = 0.0382989 Jy ! Clean residual min=-0.006005 max=0.009774 Jy/beam ! Clean residual mean=-0.000107 rms=0.001574 Jy/beam ! Combined flux in latest and established models = 0.278906 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 193 components and 0.278906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080670Jy sigma=0.000743 ! Fit after self-cal, rms=0.080402Jy sigma=0.000740 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.20 FD 0.96 HN 1.05 KP 0.96 ! LA 0.93 MK 1.02 NL 1.10 OV 1.15 ! PT 0.90 SC 0.92 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 0.99 HN 1.11 KP 0.95 ! LA 0.92 MK 1.14 NL 1.26 OV 1.20 ! PT 0.88 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.02 HN 1.06 KP 0.95 ! LA 0.94 MK 1.20 NL 1.18 OV 1.12 ! PT 0.87 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 0.91 KP 1.00* ! LA 0.99 MK 0.66 NL 1.00* OV 1.00* ! PT 0.90 SC 1.00* ! ! ! Fit before self-cal, rms=0.080402Jy sigma=0.000740 ! Fit after self-cal, rms=0.082845Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.879 mas, bmaj=4.491 mas, bpa=27.38 degrees ! Estimated noise=453.242 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463107 Jy ! Component: 100 - total flux cleaned = 0.000914968 Jy ! Component: 150 - total flux cleaned = 0.00123008 Jy ! Component: 200 - total flux cleaned = 0.00141033 Jy ! Total flux subtracted in 200 components = 0.00141033 Jy ! Clean residual min=-0.003792 max=0.004833 Jy/beam ! Clean residual mean=-0.000055 rms=0.001077 Jy/beam ! Combined flux in latest and established models = 0.280316 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 203 components and 0.280316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082769Jy sigma=0.000718 ! Fit after self-cal, rms=0.082868Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082868Jy sigma=0.000717 ! Fit after self-cal, rms=0.081651Jy sigma=0.000715 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=4.422 mas, bpa=32.08 degrees ! Estimated noise=447.925 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000707928 Jy ! Component: 100 - total flux cleaned = 0.00104198 Jy ! Component: 150 - total flux cleaned = 0.00124636 Jy ! Component: 200 - total flux cleaned = 0.00135553 Jy ! Total flux subtracted in 200 components = 0.00135553 Jy ! Clean residual min=-0.003532 max=0.003921 Jy/beam ! Clean residual mean=-0.000030 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.281671 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 212 components and 0.281671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081608Jy sigma=0.000714 ! Fit after self-cal, rms=0.081618Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0001379 Jy ! Component: 100 - total flux cleaned = 0.000329898 Jy ! Component: 150 - total flux cleaned = 0.000432287 Jy ! Component: 200 - total flux cleaned = 0.00055717 Jy ! Total flux subtracted in 200 components = 0.00055717 Jy ! Clean residual min=-0.003509 max=0.004009 Jy/beam ! Clean residual mean=-0.000029 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.282229 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 219 components and 0.282229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081588Jy sigma=0.000714 ! Fit after self-cal, rms=0.081586Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081586Jy sigma=0.000714 ! Fit after self-cal, rms=0.081006Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.883 mas, bmaj=4.416 mas, bpa=31.62 degrees ! Estimated noise=444.888 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000528158 Jy ! Component: 100 - total flux cleaned = 0.000787247 Jy ! Component: 150 - total flux cleaned = 0.00095169 Jy ! Component: 200 - total flux cleaned = 0.001129 Jy ! Total flux subtracted in 200 components = 0.001129 Jy ! Clean residual min=-0.003533 max=0.004025 Jy/beam ! Clean residual mean=-0.000030 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.283358 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 223 components and 0.283358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080979Jy sigma=0.000714 ! Fit after self-cal, rms=0.080975Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109653 Jy ! Component: 100 - total flux cleaned = 0.000266416 Jy ! Component: 150 - total flux cleaned = 0.000407259 Jy ! Component: 200 - total flux cleaned = 0.000458506 Jy ! Total flux subtracted in 200 components = 0.000458506 Jy ! Clean residual min=-0.003507 max=0.004047 Jy/beam ! Clean residual mean=-0.000029 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.283816 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 227 components and 0.283816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080954Jy sigma=0.000713 ! Fit after self-cal, rms=0.080953Jy sigma=0.000713 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080953Jy sigma=0.000713 ! Fit after self-cal, rms=0.080512Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.297 mas, bmaj=9.273 mas, bpa=48.23 degrees ! Estimated noise=563.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00161533 Jy ! Component: 100 - total flux cleaned = 0.00181946 Jy ! Component: 150 - total flux cleaned = 0.0018201 Jy ! Component: 200 - total flux cleaned = 0.0018523 Jy ! Total flux subtracted in 200 components = 0.0018523 Jy ! Clean residual min=-0.005355 max=0.006121 Jy/beam ! Clean residual mean=-0.000069 rms=0.001731 Jy/beam ! Combined flux in latest and established models = 0.285668 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 236 components and 0.285668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080521Jy sigma=0.000713 ! Fit after self-cal, rms=0.080503Jy sigma=0.000713 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000294132 Jy ! Component: 100 - total flux cleaned = 0.000360109 Jy ! Component: 150 - total flux cleaned = 0.000361357 Jy ! Component: 200 - total flux cleaned = 0.000361812 Jy ! Total flux subtracted in 200 components = 0.000361812 Jy ! Clean residual min=-0.005294 max=0.006051 Jy/beam ! Clean residual mean=-0.000068 rms=0.001728 Jy/beam ! Combined flux in latest and established models = 0.28603 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 241 components and 0.28603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080514Jy sigma=0.000713 ! Fit after self-cal, rms=0.080504Jy sigma=0.000713 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=4.412 mas, bpa=31.11 degrees ! Estimated noise=442.766 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 4.412 at 31.11 degrees (North through East) ! Clean map min=-0.0035163 max=0.063362 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.042 mas, bmaj=3.527 mas, bpa=28.98 degrees ! Estimated noise=863.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525204 Jy ! Component: 100 - total flux cleaned = 0.0872248 Jy ! Component: 150 - total flux cleaned = 0.113615 Jy ! Component: 200 - total flux cleaned = 0.134879 Jy ! Total flux subtracted in 200 components = 0.134879 Jy ! Clean residual min=-0.007512 max=0.012877 Jy/beam ! Clean residual mean=-0.000084 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.134879 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 72 model components to the UV plane model. ! The established model now contains 72 components and 0.134879 Jy ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=4.412 mas, bpa=31.11 degrees ! Estimated noise=442.766 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392456 Jy ! Component: 100 - total flux cleaned = 0.0664376 Jy ! Component: 150 - total flux cleaned = 0.0863181 Jy ! Component: 200 - total flux cleaned = 0.101153 Jy ! Total flux subtracted in 200 components = 0.101153 Jy ! Clean residual min=-0.005584 max=0.008642 Jy/beam ! Clean residual mean=-0.000096 rms=0.001714 Jy/beam ! Combined flux in latest and established models = 0.236032 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 165 components and 0.236032 Jy ! Inverting map ! Added new window around map position (-2.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112404 Jy ! Component: 100 - total flux cleaned = 0.0198095 Jy ! Component: 150 - total flux cleaned = 0.0264227 Jy ! Component: 200 - total flux cleaned = 0.0315718 Jy ! Total flux subtracted in 200 components = 0.0315718 Jy ! Clean residual min=-0.004142 max=0.005151 Jy/beam ! Clean residual mean=-0.000053 rms=0.001074 Jy/beam ! Combined flux in latest and established models = 0.267604 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 238 components and 0.267604 Jy ! Inverting map ! Added new window around map position (-15, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540637 Jy ! Component: 100 - total flux cleaned = 0.00918559 Jy ! Component: 150 - total flux cleaned = 0.0122482 Jy ! Component: 200 - total flux cleaned = 0.0147486 Jy ! Total flux subtracted in 200 components = 0.0147486 Jy ! Clean residual min=-0.003570 max=0.003225 Jy/beam ! Clean residual mean=-0.000034 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.282353 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 275 components and 0.282353 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.297 mas, bmaj=9.273 mas, bpa=48.23 degrees ! Estimated noise=563.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00369152 Jy ! Component: 100 - total flux cleaned = 0.00601187 Jy ! Component: 150 - total flux cleaned = 0.00675601 Jy ! Component: 200 - total flux cleaned = 0.00729842 Jy ! Total flux subtracted in 200 components = 0.00729842 Jy ! Clean residual min=-0.004899 max=0.005655 Jy/beam ! Clean residual mean=-0.000059 rms=0.001587 Jy/beam ! Combined flux in latest and established models = 0.289651 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000441525 Jy ! Component: 100 - total flux cleaned = 0.000801624 Jy ! Component: 150 - total flux cleaned = 0.0010702 Jy ! Component: 200 - total flux cleaned = 0.00127201 Jy ! Total flux subtracted in 200 components = 0.00127201 Jy ! Clean residual min=-0.004893 max=0.005695 Jy/beam ! Clean residual mean=-0.000055 rms=0.001581 Jy/beam ! Combined flux in latest and established models = 0.290923 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 333 components and 0.290923 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.877 mas, bmaj=4.412 mas, bpa=31.11 degrees ! Estimated noise=442.766 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.28101e-05 Jy ! Component: 100 - total flux cleaned = 0.0002163 Jy ! Component: 150 - total flux cleaned = 0.000244457 Jy ! Component: 200 - total flux cleaned = 0.000295654 Jy ! Total flux subtracted in 200 components = 0.000295654 Jy ! Clean residual min=-0.003091 max=0.003476 Jy/beam ! Clean residual mean=-0.000023 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.291219 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 362 components and 0.291219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080193Jy sigma=0.000710 ! Fit after self-cal, rms=0.080012Jy sigma=0.000709 wmodel J0429+6710_S_2017_07_09_pus_map.mod ! Writing 362 model components to file: J0429+6710_S_2017_07_09_pus_map.mod wobs J0429+6710_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0429+6710_S_2017_07_09_pus_uvs.fits wwins J0429+6710_S_2017_07_09_pus_map.win ! wwins: Wrote 6 windows to J0429+6710_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117685 Jy ! Component: 100 - total flux cleaned = 0.00213458 Jy ! Component: 150 - total flux cleaned = 0.00271772 Jy ! Component: 200 - total flux cleaned = 0.00322252 Jy ! Component: 250 - total flux cleaned = 0.00365645 Jy ! Component: 300 - total flux cleaned = 0.00393506 Jy ! Component: 350 - total flux cleaned = 0.00420462 Jy ! Component: 400 - total flux cleaned = 0.00455328 Jy ! Component: 450 - total flux cleaned = 0.00476518 Jy ! Component: 500 - total flux cleaned = 0.00501319 Jy ! Component: 550 - total flux cleaned = 0.00517491 Jy ! Component: 600 - total flux cleaned = 0.00529348 Jy ! Component: 650 - total flux cleaned = 0.00540807 Jy ! Component: 700 - total flux cleaned = 0.00552142 Jy ! Component: 750 - total flux cleaned = 0.00563114 Jy ! Component: 800 - total flux cleaned = 0.00566763 Jy ! Component: 850 - total flux cleaned = 0.00580947 Jy ! Component: 900 - total flux cleaned = 0.00584437 Jy ! Component: 950 - total flux cleaned = 0.00594753 Jy ! Component: 1000 - total flux cleaned = 0.00608168 Jy ! Component: 1050 - total flux cleaned = 0.00611411 Jy ! Component: 1100 - total flux cleaned = 0.00614649 Jy ! Component: 1150 - total flux cleaned = 0.00624199 Jy ! Component: 1200 - total flux cleaned = 0.00630515 Jy ! Component: 1250 - total flux cleaned = 0.00630524 Jy ! Component: 1300 - total flux cleaned = 0.00639668 Jy ! Component: 1350 - total flux cleaned = 0.00645681 Jy ! Component: 1400 - total flux cleaned = 0.00642747 Jy ! Component: 1450 - total flux cleaned = 0.0064569 Jy ! Component: 1500 - total flux cleaned = 0.00657212 Jy ! Component: 1550 - total flux cleaned = 0.00665715 Jy ! Component: 1600 - total flux cleaned = 0.00671286 Jy ! Component: 1650 - total flux cleaned = 0.00679601 Jy ! Component: 1700 - total flux cleaned = 0.00676862 Jy ! Component: 1750 - total flux cleaned = 0.00687683 Jy ! Component: 1800 - total flux cleaned = 0.00690374 Jy ! Component: 1850 - total flux cleaned = 0.00687757 Jy ! Component: 1900 - total flux cleaned = 0.0069814 Jy ! Component: 1950 - total flux cleaned = 0.00687905 Jy ! Component: 2000 - total flux cleaned = 0.00700619 Jy ! Component: 2050 - total flux cleaned = 0.00695608 Jy ! Component: 2100 - total flux cleaned = 0.00700595 Jy ! Component: 2150 - total flux cleaned = 0.00705559 Jy ! Component: 2200 - total flux cleaned = 0.00705584 Jy ! Component: 2250 - total flux cleaned = 0.00710392 Jy ! Component: 2300 - total flux cleaned = 0.00717529 Jy ! Component: 2350 - total flux cleaned = 0.00717506 Jy ! Component: 2400 - total flux cleaned = 0.00712849 Jy ! Component: 2450 - total flux cleaned = 0.0071515 Jy ! Component: 2500 - total flux cleaned = 0.0071969 Jy ! Component: 2550 - total flux cleaned = 0.00717423 Jy ! Component: 2600 - total flux cleaned = 0.00728558 Jy ! Component: 2650 - total flux cleaned = 0.00732975 Jy ! Component: 2700 - total flux cleaned = 0.00743862 Jy ! Component: 2750 - total flux cleaned = 0.00739492 Jy ! Component: 2800 - total flux cleaned = 0.00743761 Jy ! Component: 2850 - total flux cleaned = 0.00752252 Jy ! Component: 2900 - total flux cleaned = 0.00756425 Jy ! Component: 2950 - total flux cleaned = 0.00750198 Jy ! Component: 3000 - total flux cleaned = 0.00748148 Jy ! Component: 3050 - total flux cleaned = 0.0075227 Jy ! Component: 3100 - total flux cleaned = 0.00768467 Jy ! Component: 3150 - total flux cleaned = 0.00762431 Jy ! Component: 3200 - total flux cleaned = 0.0076441 Jy ! Component: 3250 - total flux cleaned = 0.00762466 Jy ! Component: 3300 - total flux cleaned = 0.00768346 Jy ! Component: 3350 - total flux cleaned = 0.00776086 Jy ! Component: 3400 - total flux cleaned = 0.00774139 Jy ! Component: 3450 - total flux cleaned = 0.00777961 Jy ! Component: 3500 - total flux cleaned = 0.0078363 Jy ! Component: 3550 - total flux cleaned = 0.00781772 Jy ! Component: 3600 - total flux cleaned = 0.00779932 Jy ! Component: 3650 - total flux cleaned = 0.00791025 Jy ! Component: 3700 - total flux cleaned = 0.00796506 Jy ! Component: 3750 - total flux cleaned = 0.00803744 Jy ! Component: 3800 - total flux cleaned = 0.00803762 Jy ! Component: 3850 - total flux cleaned = 0.00819807 Jy ! Component: 3900 - total flux cleaned = 0.00821563 Jy ! Component: 3950 - total flux cleaned = 0.00825077 Jy ! Component: 4000 - total flux cleaned = 0.00823343 Jy ! Component: 4050 - total flux cleaned = 0.00821633 Jy ! Total flux subtracted in 4096 components = 0.00823357 Jy ! Clean residual min=-0.001224 max=0.000985 Jy/beam ! Clean residual mean=-0.000009 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.299453 Jy keep ! Adding 376 model components to the UV plane model. ! The established model now contains 738 components and 0.299452 Jy ![Exited script file: muppet] wmap "J0429+6710_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 4.412 at 31.11 degrees (North through East) ! Clean map min=-0.001986 max=0.063913 Jy/beam ! Writing clean map to FITS file: J0429+6710_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0639127 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000341647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.60366 1.60366 3.20732 6.41463 12.8293 25.6585 51.317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.877 x 4.412 at 31.11 degrees (North through East) ! Clean map min=-0.001986 max=0.063913 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0429+6710_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:42:01 2019