! Started logfile: J0429+2724_X_2017_03_23_pus_uvs.log on Mon May 13 10:18:13 2019 obs J0429+2724_X_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0429+2724_X_2017_03_23_pus_uva.fits ! AN table 1: 20 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.8 visibilities/baseline/integration-bin. ! Found source: J0429+2724 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1124 lines of history. ! ! Reading 8640 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0429+2724_X_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.817503Jy sigma=0.006795 ! Fit after self-cal, rms=0.811831Jy sigma=0.006752 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9167 mas, bmaj=1.933 mas, bpa=22.24 degrees ! Estimated noise=1320.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1474 Jy ! Component: 100 - total flux cleaned = 0.181673 Jy ! Total flux subtracted in 100 components = 0.181673 Jy ! Clean residual min=-0.006339 max=0.012581 Jy/beam ! Clean residual mean=-0.000075 rms=0.001863 Jy/beam ! Combined flux in latest and established models = 0.181673 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.181673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087184Jy sigma=0.000684 ! Fit after self-cal, rms=0.087176Jy sigma=0.000684 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131544 Jy ! Component: 100 - total flux cleaned = 0.0206859 Jy ! Total flux subtracted in 100 components = 0.0206859 Jy ! Clean residual min=-0.005204 max=0.006539 Jy/beam ! Clean residual mean=-0.000035 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 0.202359 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.202359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085120Jy sigma=0.000664 ! Fit after self-cal, rms=0.085108Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.112 mas, bmaj=2.143 mas, bpa=21.58 degrees ! Estimated noise=927.464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00554854 Jy ! Component: 100 - total flux cleaned = 0.00829381 Jy ! Component: 150 - total flux cleaned = 0.00872 Jy ! Component: 200 - total flux cleaned = 0.0087196 Jy ! Total flux subtracted in 200 components = 0.0087196 Jy ! Clean residual min=-0.004313 max=0.006979 Jy/beam ! Clean residual mean=-0.000023 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.211078 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.211078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084768Jy sigma=0.000660 ! Fit after self-cal, rms=0.084755Jy sigma=0.000660 ! Inverting map ! Added new window around map position (-7.2, -4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073097 Jy ! Component: 100 - total flux cleaned = 0.0115076 Jy ! Component: 150 - total flux cleaned = 0.0144134 Jy ! Component: 200 - total flux cleaned = 0.0166195 Jy ! Total flux subtracted in 200 components = 0.0166195 Jy ! Clean residual min=-0.003199 max=0.003087 Jy/beam ! Clean residual mean=0.000002 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.227698 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 60 components and 0.227698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084091Jy sigma=0.000654 ! Fit after self-cal, rms=0.084038Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.99 KP 0.98 ! LA 0.98 MK 1.02 NL 0.95 OV 0.97 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.97 KP 0.98 ! LA 1.02 MK 0.96 NL 0.96 OV 0.98 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.95 KP 1.03 ! LA 1.00 MK 0.97 NL 0.99 OV 0.97 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.90 HN 1.00 KP 0.95 ! LA 1.03 MK 1.04 NL 0.98 OV 1.02 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 0.97 KP 1.03 ! LA 1.00 MK 1.00 NL 0.92 OV 0.99 ! PT 1.05 SC 1.09 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.00 KP 1.01 ! LA 1.03 MK 1.00 NL 0.98 OV 0.94 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.02 KP 0.99 ! LA 1.01 MK 0.95 NL 0.97 OV 1.02 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.04 HN 0.97 KP 0.99 ! LA 0.99 MK 1.00 NL 0.97 OV 1.01 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.03 HN 1.00 KP 1.05 ! LA 1.04 MK 1.00 NL 1.01 OV 0.99 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.99 KP 1.00 ! LA 1.04 MK 1.01 NL 0.96 OV 1.01 ! PT 1.06 SC 1.05 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 0.98 KP 1.01 ! LA 1.04 MK 0.96 NL 0.93 OV 1.00 ! PT 1.17 SC 1.06 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00 HN 1.03 KP 0.97 ! LA 1.04 MK 0.88 NL 0.99 OV 0.99 ! PT 1.08 SC 0.98 ! ! ! Fit before self-cal, rms=0.084038Jy sigma=0.000653 ! Fit after self-cal, rms=0.084545Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.12 mas, bmaj=2.138 mas, bpa=21.18 degrees ! Estimated noise=926.213 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278351 Jy ! Component: 100 - total flux cleaned = 0.00451738 Jy ! Component: 150 - total flux cleaned = 0.00542483 Jy ! Component: 200 - total flux cleaned = 0.00592115 Jy ! Total flux subtracted in 200 components = 0.00592115 Jy ! Clean residual min=-0.002156 max=0.002038 Jy/beam ! Clean residual mean=-0.000022 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.233619 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 78 components and 0.233619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084431Jy sigma=0.000646 ! Fit after self-cal, rms=0.084469Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084469Jy sigma=0.000646 ! Fit after self-cal, rms=0.084615Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.117 mas, bmaj=2.139 mas, bpa=21.18 degrees ! Estimated noise=927.145 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117121 Jy ! Component: 100 - total flux cleaned = 0.00174486 Jy ! Component: 150 - total flux cleaned = 0.00225063 Jy ! Component: 200 - total flux cleaned = 0.00248269 Jy ! Total flux subtracted in 200 components = 0.00248269 Jy ! Clean residual min=-0.002180 max=0.001958 Jy/beam ! Clean residual mean=-0.000018 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.236102 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 0.236102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084587Jy sigma=0.000644 ! Fit after self-cal, rms=0.084594Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000281213 Jy ! Component: 100 - total flux cleaned = 0.00039911 Jy ! Component: 150 - total flux cleaned = 0.000464107 Jy ! Component: 200 - total flux cleaned = 0.000525661 Jy ! Total flux subtracted in 200 components = 0.000525661 Jy ! Clean residual min=-0.002120 max=0.001958 Jy/beam ! Clean residual mean=-0.000018 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.236627 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.236627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084582Jy sigma=0.000643 ! Fit after self-cal, rms=0.084583Jy sigma=0.000643 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084583Jy sigma=0.000643 ! Fit after self-cal, rms=0.084650Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.117 mas, bmaj=2.138 mas, bpa=21.18 degrees ! Estimated noise=927.461 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000688814 Jy ! Component: 100 - total flux cleaned = 0.000999624 Jy ! Component: 150 - total flux cleaned = 0.00105472 Jy ! Component: 200 - total flux cleaned = 0.00112315 Jy ! Total flux subtracted in 200 components = 0.00112315 Jy ! Clean residual min=-0.002122 max=0.001939 Jy/beam ! Clean residual mean=-0.000019 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.23775 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 105 components and 0.23775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084641Jy sigma=0.000643 ! Fit after self-cal, rms=0.084642Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152969 Jy ! Component: 100 - total flux cleaned = 0.000169153 Jy ! Component: 150 - total flux cleaned = 0.000184481 Jy ! Component: 200 - total flux cleaned = 0.000199524 Jy ! Total flux subtracted in 200 components = 0.000199524 Jy ! Clean residual min=-0.002101 max=0.001948 Jy/beam ! Clean residual mean=-0.000018 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.23795 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.23795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084636Jy sigma=0.000643 ! Fit after self-cal, rms=0.084636Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084636Jy sigma=0.000643 ! Fit after self-cal, rms=0.084669Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=2.697 mas, bpa=3.13 degrees ! Estimated noise=1103.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102493 Jy ! Component: 100 - total flux cleaned = 0.00113748 Jy ! Component: 150 - total flux cleaned = 0.00119311 Jy ! Component: 200 - total flux cleaned = 0.00125931 Jy ! Total flux subtracted in 200 components = 0.00125931 Jy ! Clean residual min=-0.002373 max=0.002197 Jy/beam ! Clean residual mean=-0.000032 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.239209 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 115 components and 0.239209 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084670Jy sigma=0.000643 ! Fit after self-cal, rms=0.084670Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188135 Jy ! Component: 100 - total flux cleaned = 0.000187664 Jy ! Component: 150 - total flux cleaned = 0.000226846 Jy ! Component: 200 - total flux cleaned = 0.000263134 Jy ! Total flux subtracted in 200 components = 0.000263134 Jy ! Clean residual min=-0.002320 max=0.002160 Jy/beam ! Clean residual mean=-0.000031 rms=0.000610 Jy/beam ! Combined flux in latest and established models = 0.239472 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 125 components and 0.239472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084671Jy sigma=0.000643 ! Fit after self-cal, rms=0.084671Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.117 mas, bmaj=2.137 mas, bpa=21.18 degrees ! Estimated noise=927.595 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.117 x 2.137 at 21.18 degrees (North through East) ! Clean map min=-0.0019909 max=0.192 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9208 mas, bmaj=1.927 mas, bpa=21.81 degrees ! Estimated noise=1316.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146834 Jy ! Component: 100 - total flux cleaned = 0.180481 Jy ! Component: 150 - total flux cleaned = 0.194368 Jy ! Component: 200 - total flux cleaned = 0.203586 Jy ! Total flux subtracted in 200 components = 0.203586 Jy ! Clean residual min=-0.004726 max=0.005482 Jy/beam ! Clean residual mean=-0.000066 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.203586 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.203586 Jy ! Inverting map and beam ! Estimated beam: bmin=1.117 mas, bmaj=2.137 mas, bpa=21.18 degrees ! Estimated noise=927.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00820226 Jy ! Component: 100 - total flux cleaned = 0.0140213 Jy ! Component: 150 - total flux cleaned = 0.0184257 Jy ! Component: 200 - total flux cleaned = 0.0218152 Jy ! Total flux subtracted in 200 components = 0.0218152 Jy ! Clean residual min=-0.002553 max=0.002894 Jy/beam ! Clean residual mean=-0.000038 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.225401 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 46 components and 0.225401 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.13 mas, bmaj=2.697 mas, bpa=3.13 degrees ! Estimated noise=1103.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424785 Jy ! Component: 100 - total flux cleaned = 0.00696072 Jy ! Component: 150 - total flux cleaned = 0.00894963 Jy ! Component: 200 - total flux cleaned = 0.0104456 Jy ! Total flux subtracted in 200 components = 0.0104456 Jy ! Clean residual min=-0.002347 max=0.002133 Jy/beam ! Clean residual mean=-0.000041 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.235847 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114055 Jy ! Component: 100 - total flux cleaned = 0.00202842 Jy ! Component: 150 - total flux cleaned = 0.00265415 Jy ! Component: 200 - total flux cleaned = 0.00296381 Jy ! Total flux subtracted in 200 components = 0.00296381 Jy ! Clean residual min=-0.002354 max=0.002143 Jy/beam ! Clean residual mean=-0.000033 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.238811 Jy ! Adding 61 model components to the UV plane model. ! The established model now contains 105 components and 0.238811 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.117 mas, bmaj=2.137 mas, bpa=21.18 degrees ! Estimated noise=927.595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000121068 Jy ! Component: 100 - total flux cleaned = -0.000114115 Jy ! Component: 150 - total flux cleaned = -0.000114128 Jy ! Component: 200 - total flux cleaned = -0.000114223 Jy ! Total flux subtracted in 200 components = -0.000114223 Jy ! Clean residual min=-0.002127 max=0.002078 Jy/beam ! Clean residual mean=-0.000017 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.238697 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.238697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084719Jy sigma=0.000644 ! Fit after self-cal, rms=0.084718Jy sigma=0.000644 wmodel J0429+2724_X_2017_03_23_pus_map.mod ! Writing 123 model components to file: J0429+2724_X_2017_03_23_pus_map.mod wobs J0429+2724_X_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0429+2724_X_2017_03_23_pus_uvs.fits wwins J0429+2724_X_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0429+2724_X_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163706 Jy ! Component: 100 - total flux cleaned = -0.000305646 Jy ! Component: 150 - total flux cleaned = -0.000538379 Jy ! Component: 200 - total flux cleaned = -0.000665694 Jy ! Component: 250 - total flux cleaned = -0.000758272 Jy ! Component: 300 - total flux cleaned = -0.000758302 Jy ! Component: 350 - total flux cleaned = -0.000729089 Jy ! Component: 400 - total flux cleaned = -0.000728877 Jy ! Component: 450 - total flux cleaned = -0.000701658 Jy ! Component: 500 - total flux cleaned = -0.000781472 Jy ! Component: 550 - total flux cleaned = -0.000780788 Jy ! Component: 600 - total flux cleaned = -0.000806091 Jy ! Component: 650 - total flux cleaned = -0.000732209 Jy ! Component: 700 - total flux cleaned = -0.000732668 Jy ! Component: 750 - total flux cleaned = -0.000709098 Jy ! Component: 800 - total flux cleaned = -0.000709619 Jy ! Component: 850 - total flux cleaned = -0.00068768 Jy ! Component: 900 - total flux cleaned = -0.000665943 Jy ! Component: 950 - total flux cleaned = -0.000709283 Jy ! Component: 1000 - total flux cleaned = -0.000687668 Jy ! Component: 1050 - total flux cleaned = -0.000708518 Jy ! Component: 1100 - total flux cleaned = -0.000749411 Jy ! Component: 1150 - total flux cleaned = -0.000789367 Jy ! Component: 1200 - total flux cleaned = -0.000809001 Jy ! Component: 1250 - total flux cleaned = -0.000750334 Jy ! Component: 1300 - total flux cleaned = -0.000789781 Jy ! Component: 1350 - total flux cleaned = -0.000847304 Jy ! Component: 1400 - total flux cleaned = -0.000884976 Jy ! Component: 1450 - total flux cleaned = -0.000829221 Jy ! Component: 1500 - total flux cleaned = -0.000847802 Jy ! Component: 1550 - total flux cleaned = -0.000793608 Jy ! Component: 1600 - total flux cleaned = -0.000829451 Jy ! Component: 1650 - total flux cleaned = -0.000794425 Jy ! Component: 1700 - total flux cleaned = -0.000776776 Jy ! Component: 1750 - total flux cleaned = -0.000776684 Jy ! Component: 1800 - total flux cleaned = -0.000691631 Jy ! Component: 1850 - total flux cleaned = -0.000724862 Jy ! Component: 1900 - total flux cleaned = -0.000674929 Jy ! Component: 1950 - total flux cleaned = -0.000658417 Jy ! Component: 2000 - total flux cleaned = -0.000674678 Jy ! Total flux subtracted in 2048 components = -0.000690305 Jy ! Clean residual min=-0.000921 max=0.000850 Jy/beam ! Clean residual mean=-0.000011 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.238006 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 276 components and 0.238006 Jy ![Exited script file: muppet] wmap "J0429+2724_X_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.117 x 2.137 at 21.18 degrees (North through East) ! Clean map min=-0.001913 max=0.19231 Jy/beam ! Writing clean map to FITS file: J0429+2724_X_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.192313 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000316754 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.494123 0.494123 0.988247 1.97649 3.95299 7.90598 15.812 31.6239 63.2478 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.192 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.117 x 2.137 at 21.18 degrees (North through East) ! Clean map min=-0.001913 max=0.19231 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0429+2724_X_2017_03_23_pus_uvs.log closed on Mon May 13 10:18:15 2019