! Started logfile: J0429+2724_S_2017_01_21_pus_uvs.log on Sun May 5 15:46:05 2019 obs J0429+2724_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0429+2724_S_2017_01_21_pus_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.519444 visibilities/baseline/integration-bin. ! Found source: J0429+2724 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 748 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0429+2724_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.702168Jy sigma=0.005329 ! Fit after self-cal, rms=0.698468Jy sigma=0.005297 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.051 mas, bmaj=8.46 mas, bpa=-16.42 degrees ! Estimated noise=4294.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234962 Jy ! Component: 100 - total flux cleaned = 0.318492 Jy ! Total flux subtracted in 100 components = 0.318492 Jy ! Clean residual min=-0.028425 max=0.045937 Jy/beam ! Clean residual mean=-0.000455 rms=0.011976 Jy/beam ! Combined flux in latest and established models = 0.318492 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.318492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133569Jy sigma=0.000974 ! Fit after self-cal, rms=0.131958Jy sigma=0.000965 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.703 mas, bmaj=8.909 mas, bpa=-9.598 degrees ! Estimated noise=3709.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.059921 Jy ! Component: 100 - total flux cleaned = 0.0897626 Jy ! Component: 150 - total flux cleaned = 0.106481 Jy ! Component: 200 - total flux cleaned = 0.117005 Jy ! Total flux subtracted in 200 components = 0.117005 Jy ! Clean residual min=-0.015637 max=0.021351 Jy/beam ! Clean residual mean=-0.000083 rms=0.005630 Jy/beam ! Combined flux in latest and established models = 0.435497 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 19 components and 0.435497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104413Jy sigma=0.000725 ! Fit after self-cal, rms=0.103182Jy sigma=0.000719 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00* HN 0.98 LA 1.03 ! MK 1.00* NL 0.97 OV 0.96 PT 1.00 ! SC 0.83 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.93 LA 1.01 ! MK 1.00* NL 1.21 OV 1.01 PT 0.93 ! SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.00* HN 0.93 LA 1.00 ! MK 1.00* NL 1.18 OV 0.92 PT 0.92 ! SC 0.93 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00* HN 1.01 LA 0.89 ! MK 1.00* NL 1.00* OV 0.99 PT 0.95 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.103182Jy sigma=0.000719 ! Fit after self-cal, rms=0.093358Jy sigma=0.000668 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.602 mas, bmaj=8.862 mas, bpa=-9.483 degrees ! Estimated noise=3625.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280739 Jy ! Component: 100 - total flux cleaned = 0.00371317 Jy ! Component: 150 - total flux cleaned = 0.00371509 Jy ! Component: 200 - total flux cleaned = 0.00355635 Jy ! Total flux subtracted in 200 components = 0.00355635 Jy ! Clean residual min=-0.009020 max=0.013166 Jy/beam ! Clean residual mean=0.000011 rms=0.003098 Jy/beam ! Combined flux in latest and established models = 0.439053 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.439053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092277Jy sigma=0.000660 ! Fit after self-cal, rms=0.092304Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092304Jy sigma=0.000659 ! Fit after self-cal, rms=0.091083Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.579 mas, bmaj=8.853 mas, bpa=-9.189 degrees ! Estimated noise=3594.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208859 Jy ! Component: 100 - total flux cleaned = 0.000784724 Jy ! Component: 150 - total flux cleaned = 0.000779424 Jy ! Component: 200 - total flux cleaned = 0.000892944 Jy ! Total flux subtracted in 200 components = 0.000892944 Jy ! Clean residual min=-0.008570 max=0.011479 Jy/beam ! Clean residual mean=0.000009 rms=0.002814 Jy/beam ! Combined flux in latest and established models = 0.439946 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.439946 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090653Jy sigma=0.000656 ! Fit after self-cal, rms=0.090613Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000297734 Jy ! Component: 100 - total flux cleaned = 0.000402229 Jy ! Component: 150 - total flux cleaned = 0.000503054 Jy ! Component: 200 - total flux cleaned = 0.000501019 Jy ! Total flux subtracted in 200 components = 0.000501019 Jy ! Clean residual min=-0.008384 max=0.010683 Jy/beam ! Clean residual mean=0.000007 rms=0.002666 Jy/beam ! Combined flux in latest and established models = 0.440447 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 0.440447 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090362Jy sigma=0.000654 ! Fit after self-cal, rms=0.090346Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090346Jy sigma=0.000654 ! Fit after self-cal, rms=0.089463Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.565 mas, bmaj=8.855 mas, bpa=-8.847 degrees ! Estimated noise=3571.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372748 Jy ! Component: 100 - total flux cleaned = -8.55635e-05 Jy ! Component: 150 - total flux cleaned = 1.32325e-06 Jy ! Component: 200 - total flux cleaned = 8.25743e-05 Jy ! Total flux subtracted in 200 components = 8.25743e-05 Jy ! Clean residual min=-0.008054 max=0.009975 Jy/beam ! Clean residual mean=0.000007 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.44053 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 52 components and 0.44053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089236Jy sigma=0.000652 ! Fit after self-cal, rms=0.089210Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000289852 Jy ! Component: 100 - total flux cleaned = 0.000372582 Jy ! Component: 150 - total flux cleaned = 0.000449518 Jy ! Component: 200 - total flux cleaned = 0.000449193 Jy ! Total flux subtracted in 200 components = 0.000449193 Jy ! Clean residual min=-0.007892 max=0.009341 Jy/beam ! Clean residual mean=0.000006 rms=0.002381 Jy/beam ! Combined flux in latest and established models = 0.440979 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 0.440979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089056Jy sigma=0.000651 ! Fit after self-cal, rms=0.089048Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089048Jy sigma=0.000651 ! Fit after self-cal, rms=0.088493Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.112 mas, bmaj=9.881 mas, bpa=-13.98 degrees ! Estimated noise=3665.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00217056 Jy ! Component: 100 - total flux cleaned = 0.00234425 Jy ! Component: 150 - total flux cleaned = 0.00241718 Jy ! Component: 200 - total flux cleaned = 0.00241556 Jy ! Total flux subtracted in 200 components = 0.00241556 Jy ! Clean residual min=-0.006922 max=0.008895 Jy/beam ! Clean residual mean=0.000014 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 0.443395 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.443395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088399Jy sigma=0.000650 ! Fit after self-cal, rms=0.088381Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000353084 Jy ! Component: 100 - total flux cleaned = 0.000461114 Jy ! Component: 150 - total flux cleaned = 0.000411613 Jy ! Component: 200 - total flux cleaned = 0.000271664 Jy ! Total flux subtracted in 200 components = 0.000271664 Jy ! Clean residual min=-0.006809 max=0.008349 Jy/beam ! Clean residual mean=0.000011 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.443666 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 69 components and 0.443666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088321Jy sigma=0.000649 ! Fit after self-cal, rms=0.088317Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=6.556 mas, bmaj=8.86 mas, bpa=-8.582 degrees ! Estimated noise=3555.72 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.556 x 8.86 at -8.582 degrees (North through East) ! Clean map min=-0.0073982 max=0.32069 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.936 mas, bmaj=8.417 mas, bpa=-14.93 degrees ! Estimated noise=4095.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223654 Jy ! Component: 100 - total flux cleaned = 0.309067 Jy ! Component: 150 - total flux cleaned = 0.35734 Jy ! Component: 200 - total flux cleaned = 0.384758 Jy ! Total flux subtracted in 200 components = 0.384758 Jy ! Clean residual min=-0.013097 max=0.017582 Jy/beam ! Clean residual mean=-0.000162 rms=0.004691 Jy/beam ! Combined flux in latest and established models = 0.384758 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.384758 Jy ! Inverting map and beam ! Estimated beam: bmin=6.556 mas, bmaj=8.86 mas, bpa=-8.582 degrees ! Estimated noise=3555.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212121 Jy ! Component: 100 - total flux cleaned = 0.0328197 Jy ! Component: 150 - total flux cleaned = 0.0405168 Jy ! Component: 200 - total flux cleaned = 0.0458271 Jy ! Total flux subtracted in 200 components = 0.0458271 Jy ! Clean residual min=-0.008835 max=0.011492 Jy/beam ! Clean residual mean=-0.000021 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 0.430585 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.430585 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.112 mas, bmaj=9.881 mas, bpa=-13.98 degrees ! Estimated noise=3665.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578227 Jy ! Component: 100 - total flux cleaned = 0.0087822 Jy ! Component: 150 - total flux cleaned = 0.0094471 Jy ! Component: 200 - total flux cleaned = 0.00973531 Jy ! Total flux subtracted in 200 components = 0.00973531 Jy ! Clean residual min=-0.007447 max=0.009938 Jy/beam ! Clean residual mean=0.000004 rms=0.002284 Jy/beam ! Combined flux in latest and established models = 0.44032 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00513052 Jy ! Component: 100 - total flux cleaned = 0.0058441 Jy ! Component: 150 - total flux cleaned = 0.00670618 Jy ! Component: 200 - total flux cleaned = 0.00721066 Jy ! Total flux subtracted in 200 components = 0.00721066 Jy ! Clean residual min=-0.005847 max=0.006039 Jy/beam ! Clean residual mean=-0.000003 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.447531 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 50 components and 0.447531 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=6.556 mas, bmaj=8.86 mas, bpa=-8.582 degrees ! Estimated noise=3555.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109664 Jy ! Component: 100 - total flux cleaned = 0.00160995 Jy ! Component: 150 - total flux cleaned = 0.00149843 Jy ! Component: 200 - total flux cleaned = 0.00108441 Jy ! Total flux subtracted in 200 components = 0.00108441 Jy ! Clean residual min=-0.005977 max=0.006638 Jy/beam ! Clean residual mean=0.000007 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 0.448615 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 79 components and 0.448615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087573Jy sigma=0.000643 ! Fit after self-cal, rms=0.087562Jy sigma=0.000643 wmodel J0429+2724_S_2017_01_21_pus_map.mod ! Writing 79 model components to file: J0429+2724_S_2017_01_21_pus_map.mod wobs J0429+2724_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0429+2724_S_2017_01_21_pus_uvs.fits wwins J0429+2724_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J0429+2724_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020251 Jy ! Component: 100 - total flux cleaned = 0.00251801 Jy ! Component: 150 - total flux cleaned = 0.00270034 Jy ! Component: 200 - total flux cleaned = 0.00286353 Jy ! Component: 250 - total flux cleaned = 0.00278378 Jy ! Component: 300 - total flux cleaned = 0.00285501 Jy ! Component: 350 - total flux cleaned = 0.00305711 Jy ! Component: 400 - total flux cleaned = 0.00331783 Jy ! Component: 450 - total flux cleaned = 0.0036901 Jy ! Component: 500 - total flux cleaned = 0.00380908 Jy ! Component: 550 - total flux cleaned = 0.00398225 Jy ! Component: 600 - total flux cleaned = 0.00420747 Jy ! Component: 650 - total flux cleaned = 0.00447945 Jy ! Component: 700 - total flux cleaned = 0.00474639 Jy ! Component: 750 - total flux cleaned = 0.0052648 Jy ! Component: 800 - total flux cleaned = 0.00561873 Jy ! Component: 850 - total flux cleaned = 0.00596595 Jy ! Component: 900 - total flux cleaned = 0.00620938 Jy ! Component: 950 - total flux cleaned = 0.00644901 Jy ! Component: 1000 - total flux cleaned = 0.00673091 Jy ! Component: 1050 - total flux cleaned = 0.00696198 Jy ! Component: 1100 - total flux cleaned = 0.00723438 Jy ! Component: 1150 - total flux cleaned = 0.00745857 Jy ! Component: 1200 - total flux cleaned = 0.0076363 Jy ! Component: 1250 - total flux cleaned = 0.00776843 Jy ! Component: 1300 - total flux cleaned = 0.00794403 Jy ! Component: 1350 - total flux cleaned = 0.00803185 Jy ! Component: 1400 - total flux cleaned = 0.00820749 Jy ! Component: 1450 - total flux cleaned = 0.00833944 Jy ! Component: 1500 - total flux cleaned = 0.00833922 Jy ! Component: 1550 - total flux cleaned = 0.0083837 Jy ! Component: 1600 - total flux cleaned = 0.00842952 Jy ! Component: 1650 - total flux cleaned = 0.00842884 Jy ! Component: 1700 - total flux cleaned = 0.00847644 Jy ! Component: 1750 - total flux cleaned = 0.00852479 Jy ! Component: 1800 - total flux cleaned = 0.00852389 Jy ! Component: 1850 - total flux cleaned = 0.00857531 Jy ! Component: 1900 - total flux cleaned = 0.00857586 Jy ! Component: 1950 - total flux cleaned = 0.00857615 Jy ! Component: 2000 - total flux cleaned = 0.0085758 Jy ! Component: 2050 - total flux cleaned = 0.0085762 Jy ! Component: 2100 - total flux cleaned = 0.00851586 Jy ! Component: 2150 - total flux cleaned = 0.00851586 Jy ! Component: 2200 - total flux cleaned = 0.00845093 Jy ! Component: 2250 - total flux cleaned = 0.00845015 Jy ! Component: 2300 - total flux cleaned = 0.00837878 Jy ! Component: 2350 - total flux cleaned = 0.00830457 Jy ! Component: 2400 - total flux cleaned = 0.00830386 Jy ! Component: 2450 - total flux cleaned = 0.00830379 Jy ! Component: 2500 - total flux cleaned = 0.0083034 Jy ! Component: 2550 - total flux cleaned = 0.00830242 Jy ! Component: 2600 - total flux cleaned = 0.00830051 Jy ! Component: 2650 - total flux cleaned = 0.00830111 Jy ! Component: 2700 - total flux cleaned = 0.00830024 Jy ! Component: 2750 - total flux cleaned = 0.00829878 Jy ! Component: 2800 - total flux cleaned = 0.0083005 Jy ! Component: 2850 - total flux cleaned = 0.00830295 Jy ! Component: 2900 - total flux cleaned = 0.0083035 Jy ! Component: 2950 - total flux cleaned = 0.00830577 Jy ! Component: 3000 - total flux cleaned = 0.00830643 Jy ! Component: 3050 - total flux cleaned = 0.00830341 Jy ! Component: 3100 - total flux cleaned = 0.00814946 Jy ! Component: 3150 - total flux cleaned = 0.00814696 Jy ! Component: 3200 - total flux cleaned = 0.00814562 Jy ! Component: 3250 - total flux cleaned = 0.00813965 Jy ! Component: 3300 - total flux cleaned = 0.00831955 Jy ! Component: 3350 - total flux cleaned = 0.00812399 Jy ! Component: 3400 - total flux cleaned = 0.0083203 Jy ! Component: 3450 - total flux cleaned = 0.00832025 Jy ! Component: 3500 - total flux cleaned = 0.00832419 Jy ! Component: 3550 - total flux cleaned = 0.00832714 Jy ! Component: 3600 - total flux cleaned = 0.0083284 Jy ! Component: 3650 - total flux cleaned = 0.00833071 Jy ! Component: 3700 - total flux cleaned = 0.00832256 Jy ! Component: 3750 - total flux cleaned = 0.00831395 Jy ! Component: 3800 - total flux cleaned = 0.00831038 Jy ! Component: 3850 - total flux cleaned = 0.00830453 Jy ! Component: 3900 - total flux cleaned = 0.00829034 Jy ! Component: 3950 - total flux cleaned = 0.00828332 Jy ! Component: 4000 - total flux cleaned = 0.00828026 Jy ! Component: 4050 - total flux cleaned = 0.00827274 Jy ! Total flux subtracted in 4096 components = 0.00826796 Jy ! Clean residual min=-0.023076 max=0.023590 Jy/beam ! Clean residual mean=0.000210 rms=0.003942 Jy/beam ! Combined flux in latest and established models = 0.456883 Jy keep ! Adding 169 model components to the UV plane model. ! The established model now contains 248 components and 0.456883 Jy ![Exited script file: muppet] wmap "J0429+2724_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.556 x 8.86 at -8.582 degrees (North through East) ! Clean map min=-0.029686 max=0.31684 Jy/beam ! Writing clean map to FITS file: J0429+2724_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.316835 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0031398 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.97296 2.97296 5.94592 11.8918 23.7837 47.5674 95.1347 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0094 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.316 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 6.556 x 8.86 at -8.582 degrees (North through East) ! Clean map min=-0.029686 max=0.31684 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0429+2724_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:46:09 2019