! Started logfile: J0428+1732_S_2017_01_21_pus_uvs.log on Sun May 5 15:46:00 2019 obs J0428+1732_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0428+1732_S_2017_01_21_pus_uva.fits ! AN table 1: 143 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.756216 visibilities/baseline/integration-bin. ! Found source: J0428+1732 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 15572 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0428+1732_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 428 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.826541Jy sigma=0.007429 ! Fit after self-cal, rms=0.813269Jy sigma=0.007320 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=6.228 mas, bpa=-6.318 degrees ! Estimated noise=1199.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138373 Jy ! Component: 100 - total flux cleaned = 0.172269 Jy ! Total flux subtracted in 100 components = 0.172269 Jy ! Clean residual min=-0.011588 max=0.013827 Jy/beam ! Clean residual mean=0.000075 rms=0.002835 Jy/beam ! Combined flux in latest and established models = 0.172269 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.172269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089990Jy sigma=0.000735 ! Fit after self-cal, rms=0.089996Jy sigma=0.000735 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.252 mas, bmaj=7.5 mas, bpa=-1.911 degrees ! Estimated noise=679.948 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190921 Jy ! Component: 100 - total flux cleaned = 0.0216819 Jy ! Component: 150 - total flux cleaned = 0.0214276 Jy ! Component: 200 - total flux cleaned = 0.021007 Jy ! Total flux subtracted in 200 components = 0.021007 Jy ! Clean residual min=-0.004570 max=0.005315 Jy/beam ! Clean residual mean=0.000045 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.193276 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 0.193276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086509Jy sigma=0.000699 ! Fit after self-cal, rms=0.086506Jy sigma=0.000699 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 0.91 LA 1.03 ! MK 0.97 NL 1.01 OV 0.98 PT 0.99 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 0.97 LA 0.98 ! MK 0.99 NL 1.12 OV 1.01 PT 0.98 ! SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 0.97 LA 1.03 ! MK 1.01 NL 1.16 OV 0.94 PT 0.97 ! SC 0.98 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 HN 0.95 LA 1.03 ! MK 1.03 NL 1.00* OV 0.96 PT 1.00 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.086506Jy sigma=0.000699 ! Fit after self-cal, rms=0.086979Jy sigma=0.000689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=7.499 mas, bpa=-1.857 degrees ! Estimated noise=675.915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918444 Jy ! Component: 100 - total flux cleaned = 0.00103071 Jy ! Component: 150 - total flux cleaned = 0.0010303 Jy ! Component: 200 - total flux cleaned = 0.000940022 Jy ! Total flux subtracted in 200 components = 0.000940022 Jy ! Clean residual min=-0.003847 max=0.004004 Jy/beam ! Clean residual mean=0.000046 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.194216 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 29 components and 0.194216 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086916Jy sigma=0.000688 ! Fit after self-cal, rms=0.086984Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086984Jy sigma=0.000688 ! Fit after self-cal, rms=0.094523Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.577 mas, bpa=-1.404 degrees ! Estimated noise=678.229 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199962 Jy ! Component: 100 - total flux cleaned = -0.000240364 Jy ! Component: 150 - total flux cleaned = -0.000207375 Jy ! Component: 200 - total flux cleaned = -0.00017557 Jy ! Total flux subtracted in 200 components = -0.00017557 Jy ! Clean residual min=-0.001906 max=0.001842 Jy/beam ! Clean residual mean=0.000002 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.19404 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.19404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094478Jy sigma=0.000662 ! Fit after self-cal, rms=0.094983Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.79337e-05 Jy ! Component: 100 - total flux cleaned = 0.000121747 Jy ! Component: 150 - total flux cleaned = 0.00014613 Jy ! Component: 200 - total flux cleaned = 0.000192517 Jy ! Total flux subtracted in 200 components = 0.000192517 Jy ! Clean residual min=-0.001860 max=0.001768 Jy/beam ! Clean residual mean=0.000002 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.194233 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.194233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094964Jy sigma=0.000661 ! Fit after self-cal, rms=0.094961Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094961Jy sigma=0.000661 ! Fit after self-cal, rms=0.100761Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.224 mas, bmaj=7.587 mas, bpa=-1.322 degrees ! Estimated noise=678.646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.1802e-05 Jy ! Component: 100 - total flux cleaned = 5.29973e-05 Jy ! Component: 150 - total flux cleaned = 7.86036e-05 Jy ! Component: 200 - total flux cleaned = 0.000102285 Jy ! Total flux subtracted in 200 components = 0.000102285 Jy ! Clean residual min=-0.001854 max=0.001693 Jy/beam ! Clean residual mean=-0.000001 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.194335 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.194335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100737Jy sigma=0.000661 ! Fit after self-cal, rms=0.100808Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.84873e-05 Jy ! Component: 100 - total flux cleaned = 6.89454e-05 Jy ! Component: 150 - total flux cleaned = 0.00010724 Jy ! Component: 200 - total flux cleaned = 0.000143031 Jy ! Total flux subtracted in 200 components = 0.000143031 Jy ! Clean residual min=-0.001836 max=0.001668 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.194478 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 46 components and 0.194478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100793Jy sigma=0.000661 ! Fit after self-cal, rms=0.100788Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100788Jy sigma=0.000661 ! Fit after self-cal, rms=0.101569Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.059 mas, bmaj=10.56 mas, bpa=-3.732 degrees ! Estimated noise=850.072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554876 Jy ! Component: 100 - total flux cleaned = 0.000638854 Jy ! Component: 150 - total flux cleaned = 0.000692337 Jy ! Component: 200 - total flux cleaned = 0.000721943 Jy ! Total flux subtracted in 200 components = 0.000721943 Jy ! Clean residual min=-0.001755 max=0.001882 Jy/beam ! Clean residual mean=-0.000005 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.1952 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.1952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101564Jy sigma=0.000661 ! Fit after self-cal, rms=0.101576Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.05443e-05 Jy ! Component: 100 - total flux cleaned = 6.08619e-05 Jy ! Component: 150 - total flux cleaned = 6.06918e-05 Jy ! Component: 200 - total flux cleaned = 5.54874e-05 Jy ! Total flux subtracted in 200 components = 5.54874e-05 Jy ! Clean residual min=-0.001749 max=0.001879 Jy/beam ! Clean residual mean=-0.000005 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.195256 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 61 components and 0.195256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101573Jy sigma=0.000661 ! Fit after self-cal, rms=0.101575Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.589 mas, bpa=-1.28 degrees ! Estimated noise=678.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.589 at -1.28 degrees (North through East) ! Clean map min=-0.001757 max=0.19068 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.574 mas, bpa=-2.672 degrees ! Estimated noise=1291.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148313 Jy ! Component: 100 - total flux cleaned = 0.180655 Jy ! Component: 150 - total flux cleaned = 0.188391 Jy ! Component: 200 - total flux cleaned = 0.192012 Jy ! Total flux subtracted in 200 components = 0.192012 Jy ! Clean residual min=-0.003475 max=0.003300 Jy/beam ! Clean residual mean=0.000003 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.192012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.192012 Jy ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.589 mas, bpa=-1.28 degrees ! Estimated noise=678.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241708 Jy ! Component: 100 - total flux cleaned = 0.00281905 Jy ! Component: 150 - total flux cleaned = 0.00305173 Jy ! Component: 200 - total flux cleaned = 0.00305145 Jy ! Total flux subtracted in 200 components = 0.00305145 Jy ! Clean residual min=-0.001888 max=0.001738 Jy/beam ! Clean residual mean=-0.000001 rms=0.000434 Jy/beam ! Combined flux in latest and established models = 0.195063 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.195063 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.059 mas, bmaj=10.56 mas, bpa=-3.732 degrees ! Estimated noise=850.072 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.02789e-05 Jy ! Component: 100 - total flux cleaned = 0.00013135 Jy ! Component: 150 - total flux cleaned = 0.000170896 Jy ! Component: 200 - total flux cleaned = 0.000191957 Jy ! Total flux subtracted in 200 components = 0.000191957 Jy ! Clean residual min=-0.001790 max=0.001868 Jy/beam ! Clean residual mean=-0.000005 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.195255 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.23974e-06 Jy ! Component: 100 - total flux cleaned = 2.65193e-05 Jy ! Component: 150 - total flux cleaned = 4.23409e-05 Jy ! Component: 200 - total flux cleaned = 4.95608e-05 Jy ! Total flux subtracted in 200 components = 4.95608e-05 Jy ! Clean residual min=-0.001775 max=0.001873 Jy/beam ! Clean residual mean=-0.000005 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.195305 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 53 components and 0.195305 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=7.589 mas, bpa=-1.28 degrees ! Estimated noise=678.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000258629 Jy ! Component: 100 - total flux cleaned = 0.000218514 Jy ! Component: 150 - total flux cleaned = 0.000199927 Jy ! Component: 200 - total flux cleaned = 0.000183191 Jy ! Total flux subtracted in 200 components = 0.000183191 Jy ! Clean residual min=-0.001747 max=0.001728 Jy/beam ! Clean residual mean=-0.000001 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.195488 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 58 components and 0.195488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101529Jy sigma=0.000661 ! Fit after self-cal, rms=0.101507Jy sigma=0.000661 wmodel J0428+1732_S_2017_01_21_pus_map.mod ! Writing 58 model components to file: J0428+1732_S_2017_01_21_pus_map.mod wobs J0428+1732_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0428+1732_S_2017_01_21_pus_uvs.fits wwins J0428+1732_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0428+1732_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.44438e-05 Jy ! Component: 100 - total flux cleaned = 0.000202033 Jy ! Component: 150 - total flux cleaned = 0.000230013 Jy ! Component: 200 - total flux cleaned = 0.000202956 Jy ! Component: 250 - total flux cleaned = 0.000126091 Jy ! Component: 300 - total flux cleaned = 0.000101386 Jy ! Component: 350 - total flux cleaned = -1.98797e-05 Jy ! Component: 400 - total flux cleaned = -6.64951e-05 Jy ! Component: 450 - total flux cleaned = -0.000135729 Jy ! Component: 500 - total flux cleaned = -0.000248575 Jy ! Component: 550 - total flux cleaned = -0.000270205 Jy ! Component: 600 - total flux cleaned = -0.00024859 Jy ! Component: 650 - total flux cleaned = -0.000248366 Jy ! Component: 700 - total flux cleaned = -0.000185868 Jy ! Component: 750 - total flux cleaned = -0.000165423 Jy ! Component: 800 - total flux cleaned = -0.000125185 Jy ! Component: 850 - total flux cleaned = -0.000105245 Jy ! Component: 900 - total flux cleaned = -2.66459e-05 Jy ! Component: 950 - total flux cleaned = 1.21347e-05 Jy ! Component: 1000 - total flux cleaned = 8.83361e-05 Jy ! Component: 1050 - total flux cleaned = 0.000144638 Jy ! Component: 1100 - total flux cleaned = 0.000182114 Jy ! Component: 1150 - total flux cleaned = 0.000237102 Jy ! Component: 1200 - total flux cleaned = 0.000219094 Jy ! Component: 1250 - total flux cleaned = 0.000291307 Jy ! Component: 1300 - total flux cleaned = 0.000362634 Jy ! Component: 1350 - total flux cleaned = 0.000450206 Jy ! Component: 1400 - total flux cleaned = 0.000484822 Jy ! Component: 1450 - total flux cleaned = 0.00053643 Jy ! Component: 1500 - total flux cleaned = 0.000621266 Jy ! Component: 1550 - total flux cleaned = 0.000654924 Jy ! Component: 1600 - total flux cleaned = 0.000704769 Jy ! Component: 1650 - total flux cleaned = 0.000737745 Jy ! Component: 1700 - total flux cleaned = 0.00075414 Jy ! Component: 1750 - total flux cleaned = 0.000834605 Jy ! Component: 1800 - total flux cleaned = 0.000850407 Jy ! Component: 1850 - total flux cleaned = 0.000850195 Jy ! Component: 1900 - total flux cleaned = 0.000881514 Jy ! Component: 1950 - total flux cleaned = 0.000912581 Jy ! Component: 2000 - total flux cleaned = 0.000928087 Jy ! Component: 2050 - total flux cleaned = 0.000943415 Jy ! Component: 2100 - total flux cleaned = 0.00094343 Jy ! Component: 2150 - total flux cleaned = 0.000973319 Jy ! Component: 2200 - total flux cleaned = 0.000958404 Jy ! Component: 2250 - total flux cleaned = 0.000914336 Jy ! Component: 2300 - total flux cleaned = 0.000899877 Jy ! Component: 2350 - total flux cleaned = 0.000914329 Jy ! Component: 2400 - total flux cleaned = 0.000914401 Jy ! Component: 2450 - total flux cleaned = 0.000829092 Jy ! Component: 2500 - total flux cleaned = 0.000843392 Jy ! Component: 2550 - total flux cleaned = 0.000815289 Jy ! Component: 2600 - total flux cleaned = 0.000787584 Jy ! Component: 2650 - total flux cleaned = 0.000746268 Jy ! Component: 2700 - total flux cleaned = 0.000746371 Jy ! Component: 2750 - total flux cleaned = 0.000664693 Jy ! Component: 2800 - total flux cleaned = 0.000651029 Jy ! Component: 2850 - total flux cleaned = 0.00058395 Jy ! Component: 2900 - total flux cleaned = 0.000570781 Jy ! Component: 2950 - total flux cleaned = 0.000557478 Jy ! Component: 3000 - total flux cleaned = 0.00055738 Jy ! Component: 3050 - total flux cleaned = 0.000531096 Jy ! Component: 3100 - total flux cleaned = 0.000466293 Jy ! Component: 3150 - total flux cleaned = 0.000389106 Jy ! Component: 3200 - total flux cleaned = 0.000414593 Jy ! Component: 3250 - total flux cleaned = 0.000364036 Jy ! Component: 3300 - total flux cleaned = 0.000300951 Jy ! Component: 3350 - total flux cleaned = 0.000275859 Jy ! Component: 3400 - total flux cleaned = 0.000250904 Jy ! Component: 3450 - total flux cleaned = 0.000213729 Jy ! Component: 3500 - total flux cleaned = 0.00012777 Jy ! Component: 3550 - total flux cleaned = 0.000127743 Jy ! Component: 3600 - total flux cleaned = 7.90369e-05 Jy ! Component: 3650 - total flux cleaned = 6.70934e-05 Jy ! Component: 3700 - total flux cleaned = 1.91419e-05 Jy ! Component: 3750 - total flux cleaned = 7.35658e-06 Jy ! Component: 3800 - total flux cleaned = -1.62909e-05 Jy ! Component: 3850 - total flux cleaned = -6.33102e-05 Jy ! Component: 3900 - total flux cleaned = -2.82547e-05 Jy ! Component: 3950 - total flux cleaned = -7.48052e-05 Jy ! Component: 4000 - total flux cleaned = -7.4976e-05 Jy ! Component: 4050 - total flux cleaned = -0.000155314 Jy ! Total flux subtracted in 4096 components = -0.000155372 Jy ! Clean residual min=-0.000674 max=0.000709 Jy/beam ! Clean residual mean=-0.000002 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.195333 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 350 components and 0.195333 Jy ![Exited script file: muppet] wmap "J0428+1732_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.589 at -1.28 degrees (North through East) ! Clean map min=-0.0011876 max=0.19121 Jy/beam ! Writing clean map to FITS file: J0428+1732_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.191214 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205226 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.321985 0.321985 0.643971 1.28794 2.57588 5.15176 10.3035 20.6071 41.2141 82.4282 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.191 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.222 x 7.589 at -1.28 degrees (North through East) ! Clean map min=-0.0011876 max=0.19121 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0428+1732_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:46:05 2019