! Started logfile: J0427-0700_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:31:18 2019 obs J0427-0700_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0427-0700_S_2017_03_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964133 visibilities/baseline/integration-bin. ! Found source: J0427-0700 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 19784 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0427-0700_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 372 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.760509Jy sigma=0.005979 ! Fit after self-cal, rms=0.725245Jy sigma=0.005710 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.622 mas, bmaj=6.764 mas, bpa=-2.891 degrees ! Estimated noise=997.579 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218038 Jy ! Component: 100 - total flux cleaned = 0.265679 Jy ! Total flux subtracted in 100 components = 0.265679 Jy ! Clean residual min=-0.010509 max=0.015293 Jy/beam ! Clean residual mean=-0.000021 rms=0.002991 Jy/beam ! Combined flux in latest and established models = 0.265679 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.265679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121493Jy sigma=0.000874 ! Fit after self-cal, rms=0.121474Jy sigma=0.000873 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.155 mas, bmaj=7.854 mas, bpa=-2.7 degrees ! Estimated noise=697.702 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195812 Jy ! Component: 100 - total flux cleaned = 0.0286666 Jy ! Component: 150 - total flux cleaned = 0.0338432 Jy ! Component: 200 - total flux cleaned = 0.0368826 Jy ! Total flux subtracted in 200 components = 0.0368826 Jy ! Clean residual min=-0.008549 max=0.012493 Jy/beam ! Clean residual mean=0.000006 rms=0.002662 Jy/beam ! Combined flux in latest and established models = 0.302561 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.302561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118871Jy sigma=0.000845 ! Fit after self-cal, rms=0.118903Jy sigma=0.000845 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.91 HN 0.95 KP 1.01 ! LA 0.97 MK 0.99 NL 0.99 OV 1.01 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.93 HN 1.00 KP 0.97 ! LA 0.94 MK 0.99 NL 1.03 OV 1.03 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.00 HN 1.00 KP 0.98 ! LA 0.96 MK 1.03 NL 1.01 OV 1.09 ! PT 0.92 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 1.07 HN 1.00 KP 1.00* ! LA 1.00 MK 1.21 NL 1.00* OV 1.12 ! PT 0.93 SC 1.81 ! ! ! Fit before self-cal, rms=0.118903Jy sigma=0.000845 ! Fit after self-cal, rms=0.129459Jy sigma=0.000818 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=7.959 mas, bpa=-2.566 degrees ! Estimated noise=700.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00202699 Jy ! Component: 100 - total flux cleaned = -0.00222414 Jy ! Component: 150 - total flux cleaned = -0.00230747 Jy ! Component: 200 - total flux cleaned = -0.00238658 Jy ! Total flux subtracted in 200 components = -0.00238658 Jy ! Clean residual min=-0.009206 max=0.009981 Jy/beam ! Clean residual mean=-0.000016 rms=0.002385 Jy/beam ! Combined flux in latest and established models = 0.300175 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.300175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129334Jy sigma=0.000817 ! Fit after self-cal, rms=0.129531Jy sigma=0.000817 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129531Jy sigma=0.000817 ! Fit after self-cal, rms=0.156084Jy sigma=0.000746 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=7.985 mas, bpa=-2.762 degrees ! Estimated noise=711.295 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397601 Jy ! Component: 100 - total flux cleaned = 0.0038661 Jy ! Component: 150 - total flux cleaned = 0.00386367 Jy ! Component: 200 - total flux cleaned = 0.00377962 Jy ! Total flux subtracted in 200 components = 0.00377962 Jy ! Clean residual min=-0.005080 max=0.004723 Jy/beam ! Clean residual mean=-0.000015 rms=0.001221 Jy/beam ! Combined flux in latest and established models = 0.303955 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.303954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155907Jy sigma=0.000745 ! Fit after self-cal, rms=0.156828Jy sigma=0.000744 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199994 Jy ! Component: 100 - total flux cleaned = -0.000327089 Jy ! Component: 150 - total flux cleaned = -0.000444012 Jy ! Component: 200 - total flux cleaned = -0.000550651 Jy ! Total flux subtracted in 200 components = -0.000550651 Jy ! Clean residual min=-0.004620 max=0.004530 Jy/beam ! Clean residual mean=-0.000015 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.303404 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 54 components and 0.303404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156796Jy sigma=0.000743 ! Fit after self-cal, rms=0.156801Jy sigma=0.000743 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156801Jy sigma=0.000743 ! Fit after self-cal, rms=0.177842Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=7.96 mas, bpa=-2.828 degrees ! Estimated noise=710.084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271785 Jy ! Component: 100 - total flux cleaned = 0.00029541 Jy ! Component: 150 - total flux cleaned = 0.000316474 Jy ! Component: 200 - total flux cleaned = 0.00031645 Jy ! Total flux subtracted in 200 components = 0.00031645 Jy ! Clean residual min=-0.002163 max=0.003193 Jy/beam ! Clean residual mean=0.000001 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.30372 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.30372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177832Jy sigma=0.000722 ! Fit after self-cal, rms=0.178293Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276925 Jy ! Component: 100 - total flux cleaned = 0.00391092 Jy ! Component: 150 - total flux cleaned = 0.00411889 Jy ! Component: 200 - total flux cleaned = 0.00411686 Jy ! Total flux subtracted in 200 components = 0.00411686 Jy ! Clean residual min=-0.001888 max=0.002128 Jy/beam ! Clean residual mean=-0.000000 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.307837 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 76 components and 0.307837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178235Jy sigma=0.000722 ! Fit after self-cal, rms=0.178239Jy sigma=0.000721 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178239Jy sigma=0.000721 ! Fit after self-cal, rms=0.180818Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.414 mas, bmaj=13.73 mas, bpa=1.618 degrees ! Estimated noise=894.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141861 Jy ! Component: 100 - total flux cleaned = 0.00152535 Jy ! Component: 150 - total flux cleaned = 0.00149868 Jy ! Component: 200 - total flux cleaned = 0.00147399 Jy ! Total flux subtracted in 200 components = 0.00147399 Jy ! Clean residual min=-0.002288 max=0.002516 Jy/beam ! Clean residual mean=0.000000 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.309311 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 97 components and 0.309311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180799Jy sigma=0.000721 ! Fit after self-cal, rms=0.180862Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000282567 Jy ! Component: 100 - total flux cleaned = 0.000259187 Jy ! Component: 150 - total flux cleaned = 0.000217562 Jy ! Component: 200 - total flux cleaned = 0.000180525 Jy ! Total flux subtracted in 200 components = 0.000180525 Jy ! Clean residual min=-0.002246 max=0.002473 Jy/beam ! Clean residual mean=0.000000 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.309492 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 103 components and 0.309491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180854Jy sigma=0.000721 ! Fit after self-cal, rms=0.180856Jy sigma=0.000721 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.957 mas, bpa=-2.836 degrees ! Estimated noise=710.222 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 7.957 at -2.836 degrees (North through East) ! Clean map min=-0.0018021 max=0.29032 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.607 mas, bmaj=6.83 mas, bpa=-3.002 degrees ! Estimated noise=1029.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.224816 Jy ! Component: 100 - total flux cleaned = 0.274081 Jy ! Component: 150 - total flux cleaned = 0.289274 Jy ! Component: 200 - total flux cleaned = 0.2964 Jy ! Total flux subtracted in 200 components = 0.2964 Jy ! Clean residual min=-0.003327 max=0.004656 Jy/beam ! Clean residual mean=-0.000005 rms=0.000813 Jy/beam ! Combined flux in latest and established models = 0.2964 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.2964 Jy ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.957 mas, bpa=-2.836 degrees ! Estimated noise=710.222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522278 Jy ! Component: 100 - total flux cleaned = 0.00829741 Jy ! Component: 150 - total flux cleaned = 0.0103227 Jy ! Component: 200 - total flux cleaned = 0.0117093 Jy ! Total flux subtracted in 200 components = 0.0117093 Jy ! Clean residual min=-0.002053 max=0.001963 Jy/beam ! Clean residual mean=-0.000000 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.30811 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 46 components and 0.30811 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.414 mas, bmaj=13.73 mas, bpa=1.618 degrees ! Estimated noise=894.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000948782 Jy ! Component: 100 - total flux cleaned = 0.00116521 Jy ! Component: 150 - total flux cleaned = 0.00120113 Jy ! Component: 200 - total flux cleaned = 0.00120287 Jy ! Total flux subtracted in 200 components = 0.00120287 Jy ! Clean residual min=-0.002359 max=0.002527 Jy/beam ! Clean residual mean=-0.000000 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.309312 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.49572e-05 Jy ! Component: 100 - total flux cleaned = -4.90254e-05 Jy ! Component: 150 - total flux cleaned = -0.000115821 Jy ! Component: 200 - total flux cleaned = -0.000155745 Jy ! Total flux subtracted in 200 components = -0.000155745 Jy ! Clean residual min=-0.002273 max=0.002489 Jy/beam ! Clean residual mean=0.000000 rms=0.000640 Jy/beam ! Combined flux in latest and established models = 0.309157 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 100 components and 0.309157 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=7.957 mas, bpa=-2.836 degrees ! Estimated noise=710.222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.69313e-05 Jy ! Component: 100 - total flux cleaned = 9.50386e-05 Jy ! Component: 150 - total flux cleaned = 0.000119457 Jy ! Component: 200 - total flux cleaned = 0.000119168 Jy ! Total flux subtracted in 200 components = 0.000119168 Jy ! Clean residual min=-0.001955 max=0.001951 Jy/beam ! Clean residual mean=0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.309276 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 118 components and 0.309276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180844Jy sigma=0.000721 ! Fit after self-cal, rms=0.180838Jy sigma=0.000721 wmodel J0427-0700_S_2017_03_27_pus_map.mod ! Writing 118 model components to file: J0427-0700_S_2017_03_27_pus_map.mod wobs J0427-0700_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0427-0700_S_2017_03_27_pus_uvs.fits wwins J0427-0700_S_2017_03_27_pus_map.win ! wwins: Wrote 3 windows to J0427-0700_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209787 Jy ! Component: 100 - total flux cleaned = 0.000309283 Jy ! Component: 150 - total flux cleaned = 0.000371839 Jy ! Component: 200 - total flux cleaned = 0.000371632 Jy ! Component: 250 - total flux cleaned = 0.000371713 Jy ! Component: 300 - total flux cleaned = 0.000228684 Jy ! Component: 350 - total flux cleaned = 0.000256324 Jy ! Component: 400 - total flux cleaned = 0.000201644 Jy ! Component: 450 - total flux cleaned = 0.000308267 Jy ! Component: 500 - total flux cleaned = 0.000308573 Jy ! Component: 550 - total flux cleaned = 0.000386003 Jy ! Component: 600 - total flux cleaned = 0.000461638 Jy ! Component: 650 - total flux cleaned = 0.00041229 Jy ! Component: 700 - total flux cleaned = 0.000412557 Jy ! Component: 750 - total flux cleaned = 0.000388932 Jy ! Component: 800 - total flux cleaned = 0.000294205 Jy ! Component: 850 - total flux cleaned = 0.00029428 Jy ! Component: 900 - total flux cleaned = 0.000179144 Jy ! Component: 950 - total flux cleaned = 0.00013341 Jy ! Component: 1000 - total flux cleaned = 6.58865e-05 Jy ! Component: 1050 - total flux cleaned = 4.37066e-05 Jy ! Component: 1100 - total flux cleaned = 4.39614e-05 Jy ! Component: 1150 - total flux cleaned = 2.21748e-05 Jy ! Component: 1200 - total flux cleaned = -4.21842e-05 Jy ! Component: 1250 - total flux cleaned = 4.28637e-05 Jy ! Component: 1300 - total flux cleaned = 6.91861e-07 Jy ! Component: 1350 - total flux cleaned = 1.05424e-06 Jy ! Component: 1400 - total flux cleaned = 1.07509e-06 Jy ! Component: 1450 - total flux cleaned = -1.91837e-05 Jy ! Component: 1500 - total flux cleaned = 8.63351e-07 Jy ! Component: 1550 - total flux cleaned = 5.36577e-07 Jy ! Component: 1600 - total flux cleaned = 6.01722e-05 Jy ! Component: 1650 - total flux cleaned = 1.48039e-06 Jy ! Component: 1700 - total flux cleaned = 4.05038e-05 Jy ! Component: 1750 - total flux cleaned = 7.92724e-05 Jy ! Component: 1800 - total flux cleaned = 0.000117528 Jy ! Component: 1850 - total flux cleaned = 9.86154e-05 Jy ! Component: 1900 - total flux cleaned = 9.84752e-05 Jy ! Component: 1950 - total flux cleaned = 0.000135931 Jy ! Component: 2000 - total flux cleaned = 0.000173053 Jy ! Component: 2050 - total flux cleaned = 0.000154655 Jy ! Component: 2100 - total flux cleaned = 0.000173113 Jy ! Component: 2150 - total flux cleaned = 0.000118582 Jy ! Component: 2200 - total flux cleaned = 0.000118841 Jy ! Component: 2250 - total flux cleaned = 0.000100932 Jy ! Component: 2300 - total flux cleaned = 1.18469e-05 Jy ! Component: 2350 - total flux cleaned = 0.000118277 Jy ! Component: 2400 - total flux cleaned = 4.78862e-05 Jy ! Component: 2450 - total flux cleaned = 3.05554e-05 Jy ! Component: 2500 - total flux cleaned = -5.61744e-05 Jy ! Component: 2550 - total flux cleaned = -2.16248e-05 Jy ! Component: 2600 - total flux cleaned = 2.96388e-05 Jy ! Component: 2650 - total flux cleaned = -5.53559e-05 Jy ! Component: 2700 - total flux cleaned = -8.92972e-05 Jy ! Component: 2750 - total flux cleaned = -0.000106066 Jy ! Component: 2800 - total flux cleaned = -0.000122668 Jy ! Component: 2850 - total flux cleaned = -0.00018931 Jy ! Component: 2900 - total flux cleaned = -0.000222352 Jy ! Component: 2950 - total flux cleaned = -0.000271542 Jy ! Component: 3000 - total flux cleaned = -0.000206069 Jy ! Component: 3050 - total flux cleaned = -0.000303652 Jy ! Component: 3100 - total flux cleaned = -0.000336072 Jy ! Component: 3150 - total flux cleaned = -0.000384355 Jy ! Component: 3200 - total flux cleaned = -0.000368331 Jy ! Component: 3250 - total flux cleaned = -0.000352548 Jy ! Component: 3300 - total flux cleaned = -0.000447341 Jy ! Component: 3350 - total flux cleaned = -0.000447378 Jy ! Component: 3400 - total flux cleaned = -0.00049427 Jy ! Component: 3450 - total flux cleaned = -0.000572195 Jy ! Component: 3500 - total flux cleaned = -0.000587609 Jy ! Component: 3550 - total flux cleaned = -0.000695301 Jy ! Component: 3600 - total flux cleaned = -0.000649251 Jy ! Component: 3650 - total flux cleaned = -0.000710295 Jy ! Component: 3700 - total flux cleaned = -0.000755738 Jy ! Component: 3750 - total flux cleaned = -0.000755729 Jy ! Component: 3800 - total flux cleaned = -0.000770715 Jy ! Component: 3850 - total flux cleaned = -0.000815547 Jy ! Component: 3900 - total flux cleaned = -0.000845264 Jy ! Component: 3950 - total flux cleaned = -0.000904583 Jy ! Component: 4000 - total flux cleaned = -0.000904707 Jy ! Component: 4050 - total flux cleaned = -0.000963568 Jy ! Total flux subtracted in 4096 components = -0.00105121 Jy ! Clean residual min=-0.000823 max=0.000864 Jy/beam ! Clean residual mean=0.000000 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.308225 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 405 components and 0.308225 Jy ![Exited script file: muppet] wmap "J0427-0700_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 7.957 at -2.836 degrees (North through East) ! Clean map min=-0.0013408 max=0.29088 Jy/beam ! Writing clean map to FITS file: J0427-0700_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.290879 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277585 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.286289 0.286289 0.572578 1.14516 2.29031 4.58063 9.16126 18.3225 36.645 73.29 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.29 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.15 x 7.957 at -2.836 degrees (North through East) ! Clean map min=-0.0013408 max=0.29088 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0427-0700_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:31:24 2019