! Started logfile: J0426+1257_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:08 2019 obs J0426+1257_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0426+1257_S_2017_10_21_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.774713 visibilities/baseline/integration-bin. ! Found source: J0426+1257 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 16176 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0426+1257_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 160 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 246 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 959 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.977656Jy sigma=0.010457 ! Fit after self-cal, rms=0.954449Jy sigma=0.010222 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=11.56 mas, bpa=-22.25 degrees ! Estimated noise=931.947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359869 Jy ! Component: 100 - total flux cleaned = 0.0442627 Jy ! Total flux subtracted in 100 components = 0.0442627 Jy ! Clean residual min=-0.003516 max=0.003485 Jy/beam ! Clean residual mean=-0.000019 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0442627 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0442627 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070530Jy sigma=0.000691 ! Fit after self-cal, rms=0.070104Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.847 mas, bmaj=12.65 mas, bpa=-22.07 degrees ! Estimated noise=638.733 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353356 Jy ! Component: 100 - total flux cleaned = 0.00448466 Jy ! Component: 150 - total flux cleaned = 0.00444857 Jy ! Component: 200 - total flux cleaned = 0.00450081 Jy ! Total flux subtracted in 200 components = 0.00450081 Jy ! Clean residual min=-0.002857 max=0.002506 Jy/beam ! Clean residual mean=-0.000020 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.0487635 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.0487635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069883Jy sigma=0.000685 ! Fit after self-cal, rms=0.069858Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.97 KP 1.13 ! LA 1.03 MK 1.09 NL 0.94 OV 0.99 ! PT 0.85 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 1.02 KP 1.05 ! LA 0.98 MK 1.11 NL 1.04 OV 1.06 ! PT 0.87 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 1.26 HN 0.94 KP 1.12 ! LA 0.80 MK 0.99 NL 1.14 OV 0.99 ! PT 0.90 ! ! ! Correcting IF 4. ! A total of 306 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.23 HN 0.81 KP 1.00* ! LA 1.64 MK 1.00* NL 1.00* OV 1.00* ! PT 0.58 ! ! ! Fit before self-cal, rms=0.069858Jy sigma=0.000685 ! Fit after self-cal, rms=0.067752Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.887 mas, bmaj=12.47 mas, bpa=-21.93 degrees ! Estimated noise=653.289 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000203005 Jy ! Component: 100 - total flux cleaned = -0.000116401 Jy ! Component: 150 - total flux cleaned = -7.23099e-05 Jy ! Component: 200 - total flux cleaned = -3.43891e-05 Jy ! Total flux subtracted in 200 components = -3.43891e-05 Jy ! Clean residual min=-0.001737 max=0.001736 Jy/beam ! Clean residual mean=-0.000003 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0487291 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.0487291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067744Jy sigma=0.000683 ! Fit after self-cal, rms=0.067734Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067734Jy sigma=0.000682 ! Fit after self-cal, rms=0.068445Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.915 mas, bmaj=12.47 mas, bpa=-21.81 degrees ! Estimated noise=652.916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.69005e-05 Jy ! Component: 100 - total flux cleaned = 0.000109161 Jy ! Component: 150 - total flux cleaned = 0.000191487 Jy ! Component: 200 - total flux cleaned = 0.00020248 Jy ! Total flux subtracted in 200 components = 0.00020248 Jy ! Clean residual min=-0.001558 max=0.001660 Jy/beam ! Clean residual mean=-0.000000 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.0489316 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.0489316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068436Jy sigma=0.000681 ! Fit after self-cal, rms=0.068596Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000124964 Jy ! Component: 100 - total flux cleaned = 0.000246059 Jy ! Component: 150 - total flux cleaned = 0.000287465 Jy ! Component: 200 - total flux cleaned = 0.000315859 Jy ! Total flux subtracted in 200 components = 0.000315859 Jy ! Clean residual min=-0.001507 max=0.001670 Jy/beam ! Clean residual mean=-0.000002 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.0492474 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 48 components and 0.0492474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068592Jy sigma=0.000680 ! Fit after self-cal, rms=0.068598Jy sigma=0.000680 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068598Jy sigma=0.000680 ! Fit after self-cal, rms=0.069736Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.924 mas, bmaj=12.48 mas, bpa=-21.77 degrees ! Estimated noise=654.739 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106845 Jy ! Component: 100 - total flux cleaned = 0.000209336 Jy ! Component: 150 - total flux cleaned = 0.000230739 Jy ! Component: 200 - total flux cleaned = 0.000249461 Jy ! Total flux subtracted in 200 components = 0.000249461 Jy ! Clean residual min=-0.001514 max=0.001632 Jy/beam ! Clean residual mean=0.000000 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.0494969 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0494969 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069731Jy sigma=0.000680 ! Fit after self-cal, rms=0.069800Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.31203e-05 Jy ! Component: 100 - total flux cleaned = 0.000129756 Jy ! Component: 150 - total flux cleaned = 0.000145526 Jy ! Component: 200 - total flux cleaned = 0.000153268 Jy ! Total flux subtracted in 200 components = 0.000153268 Jy ! Clean residual min=-0.001472 max=0.001649 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.0496502 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 56 components and 0.0496502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069798Jy sigma=0.000680 ! Fit after self-cal, rms=0.069800Jy sigma=0.000680 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069800Jy sigma=0.000680 ! Fit after self-cal, rms=0.070740Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.262 mas, bmaj=13.09 mas, bpa=-21.63 degrees ! Estimated noise=757.211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190952 Jy ! Component: 100 - total flux cleaned = 0.000214236 Jy ! Component: 150 - total flux cleaned = 0.000235393 Jy ! Component: 200 - total flux cleaned = 0.000254639 Jy ! Total flux subtracted in 200 components = 0.000254639 Jy ! Clean residual min=-0.001899 max=0.001817 Jy/beam ! Clean residual mean=0.000001 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0499048 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.0499048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070738Jy sigma=0.000680 ! Fit after self-cal, rms=0.070766Jy sigma=0.000680 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.61085e-05 Jy ! Component: 100 - total flux cleaned = 9.05499e-05 Jy ! Component: 150 - total flux cleaned = 0.000121156 Jy ! Component: 200 - total flux cleaned = 0.000145013 Jy ! Total flux subtracted in 200 components = 0.000145013 Jy ! Clean residual min=-0.001890 max=0.001835 Jy/beam ! Clean residual mean=0.000001 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0500498 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.0500498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070766Jy sigma=0.000680 ! Fit after self-cal, rms=0.070773Jy sigma=0.000680 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.929 mas, bmaj=12.47 mas, bpa=-21.74 degrees ! Estimated noise=655.773 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.929 x 12.47 at -21.74 degrees (North through East) ! Clean map min=-0.0014648 max=0.047339 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.409 mas, bmaj=11.3 mas, bpa=-22 degrees ! Estimated noise=998.088 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0362918 Jy ! Component: 100 - total flux cleaned = 0.0446406 Jy ! Component: 150 - total flux cleaned = 0.0464223 Jy ! Component: 200 - total flux cleaned = 0.0472054 Jy ! Total flux subtracted in 200 components = 0.0472054 Jy ! Clean residual min=-0.002476 max=0.002210 Jy/beam ! Clean residual mean=-0.000000 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.0472054 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0472054 Jy ! Inverting map and beam ! Estimated beam: bmin=3.929 mas, bmaj=12.47 mas, bpa=-21.74 degrees ! Estimated noise=655.773 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130959 Jy ! Component: 100 - total flux cleaned = 0.00176189 Jy ! Component: 150 - total flux cleaned = 0.0020954 Jy ! Component: 200 - total flux cleaned = 0.00232244 Jy ! Total flux subtracted in 200 components = 0.00232244 Jy ! Clean residual min=-0.001620 max=0.001665 Jy/beam ! Clean residual mean=0.000000 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0495278 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0495278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.262 mas, bmaj=13.09 mas, bpa=-21.63 degrees ! Estimated noise=757.211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000277318 Jy ! Component: 100 - total flux cleaned = 0.000339945 Jy ! Component: 150 - total flux cleaned = 0.000375278 Jy ! Component: 200 - total flux cleaned = 0.000406691 Jy ! Total flux subtracted in 200 components = 0.000406691 Jy ! Clean residual min=-0.001947 max=0.001798 Jy/beam ! Clean residual mean=0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0499345 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.57684e-05 Jy ! Component: 100 - total flux cleaned = 6.20631e-05 Jy ! Component: 150 - total flux cleaned = 8.04031e-05 Jy ! Component: 200 - total flux cleaned = 9.17895e-05 Jy ! Total flux subtracted in 200 components = 9.17895e-05 Jy ! Clean residual min=-0.001936 max=0.001807 Jy/beam ! Clean residual mean=0.000001 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0500263 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.0500263 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.929 mas, bmaj=12.47 mas, bpa=-21.74 degrees ! Estimated noise=655.773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146569 Jy ! Component: 100 - total flux cleaned = -0.000176916 Jy ! Component: 150 - total flux cleaned = -0.00019067 Jy ! Component: 200 - total flux cleaned = -0.000177833 Jy ! Total flux subtracted in 200 components = -0.000177833 Jy ! Clean residual min=-0.001555 max=0.001611 Jy/beam ! Clean residual mean=0.000000 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0498485 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.0498485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070777Jy sigma=0.000680 ! Fit after self-cal, rms=0.070781Jy sigma=0.000680 wmodel J0426+1257_S_2017_10_21_pus_map.mod ! Writing 58 model components to file: J0426+1257_S_2017_10_21_pus_map.mod wobs J0426+1257_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0426+1257_S_2017_10_21_pus_uvs.fits wwins J0426+1257_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0426+1257_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000385623 Jy ! Component: 100 - total flux cleaned = 0.00068074 Jy ! Component: 150 - total flux cleaned = 0.000905349 Jy ! Component: 200 - total flux cleaned = 0.00109256 Jy ! Component: 250 - total flux cleaned = 0.00118078 Jy ! Component: 300 - total flux cleaned = 0.0013076 Jy ! Component: 350 - total flux cleaned = 0.00146844 Jy ! Component: 400 - total flux cleaned = 0.00150628 Jy ! Component: 450 - total flux cleaned = 0.00154283 Jy ! Component: 500 - total flux cleaned = 0.00148894 Jy ! Component: 550 - total flux cleaned = 0.00140235 Jy ! Component: 600 - total flux cleaned = 0.00125098 Jy ! Component: 650 - total flux cleaned = 0.00121824 Jy ! Component: 700 - total flux cleaned = 0.00107491 Jy ! Component: 750 - total flux cleaned = 0.00104402 Jy ! Component: 800 - total flux cleaned = 0.0009374 Jy ! Component: 850 - total flux cleaned = 0.000878232 Jy ! Component: 900 - total flux cleaned = 0.000820398 Jy ! Component: 950 - total flux cleaned = 0.000734981 Jy ! Component: 1000 - total flux cleaned = 0.000692935 Jy ! Component: 1050 - total flux cleaned = 0.000611142 Jy ! Component: 1100 - total flux cleaned = 0.000624407 Jy ! Component: 1150 - total flux cleaned = 0.000584954 Jy ! Component: 1200 - total flux cleaned = 0.000559205 Jy ! Component: 1250 - total flux cleaned = 0.000533814 Jy ! Component: 1300 - total flux cleaned = 0.000509175 Jy ! Component: 1350 - total flux cleaned = 0.000460224 Jy ! Component: 1400 - total flux cleaned = 0.000436169 Jy ! Component: 1450 - total flux cleaned = 0.0004007 Jy ! Component: 1500 - total flux cleaned = 0.000354108 Jy ! Component: 1550 - total flux cleaned = 0.000308466 Jy ! Component: 1600 - total flux cleaned = 0.00027463 Jy ! Component: 1650 - total flux cleaned = 0.000218824 Jy ! Component: 1700 - total flux cleaned = 0.000207622 Jy ! Component: 1750 - total flux cleaned = 0.000185861 Jy ! Component: 1800 - total flux cleaned = 0.000143035 Jy ! Component: 1850 - total flux cleaned = 0.000174842 Jy ! Component: 1900 - total flux cleaned = 0.000164479 Jy ! Component: 1950 - total flux cleaned = 0.000154596 Jy ! Component: 2000 - total flux cleaned = 0.000195171 Jy ! Component: 2050 - total flux cleaned = 0.000205087 Jy ! Component: 2100 - total flux cleaned = 0.000204981 Jy ! Component: 2150 - total flux cleaned = 0.000214814 Jy ! Component: 2200 - total flux cleaned = 0.000166491 Jy ! Component: 2250 - total flux cleaned = 0.000185627 Jy ! Component: 2300 - total flux cleaned = 0.000176365 Jy ! Component: 2350 - total flux cleaned = 0.000176377 Jy ! Component: 2400 - total flux cleaned = 0.000148708 Jy ! Component: 2450 - total flux cleaned = 0.000112252 Jy ! Component: 2500 - total flux cleaned = 8.52891e-05 Jy ! Component: 2550 - total flux cleaned = 6.74985e-05 Jy ! Component: 2600 - total flux cleaned = 4.98754e-05 Jy ! Component: 2650 - total flux cleaned = 9.36082e-05 Jy ! Component: 2700 - total flux cleaned = 5.00095e-05 Jy ! Component: 2750 - total flux cleaned = 6.72065e-05 Jy ! Component: 2800 - total flux cleaned = 5.85579e-05 Jy ! Component: 2850 - total flux cleaned = 7.55145e-05 Jy ! Component: 2900 - total flux cleaned = 5.86197e-05 Jy ! Component: 2950 - total flux cleaned = 6.69408e-05 Jy ! Component: 3000 - total flux cleaned = 9.18751e-05 Jy ! Component: 3050 - total flux cleaned = 0.000100146 Jy ! Component: 3100 - total flux cleaned = 5.11525e-05 Jy ! Component: 3150 - total flux cleaned = 5.12158e-05 Jy ! Component: 3200 - total flux cleaned = 5.11916e-05 Jy ! Component: 3250 - total flux cleaned = 1.90988e-05 Jy ! Component: 3300 - total flux cleaned = 1.11897e-05 Jy ! Component: 3350 - total flux cleaned = -1.26483e-05 Jy ! Component: 3400 - total flux cleaned = -2.05377e-05 Jy ! Component: 3450 - total flux cleaned = -2.05308e-05 Jy ! Component: 3500 - total flux cleaned = -4.40348e-05 Jy ! Component: 3550 - total flux cleaned = -6.74435e-05 Jy ! Component: 3600 - total flux cleaned = -7.52184e-05 Jy ! Component: 3650 - total flux cleaned = -9.07319e-05 Jy ! Component: 3700 - total flux cleaned = -9.84698e-05 Jy ! Component: 3750 - total flux cleaned = -0.000113806 Jy ! Component: 3800 - total flux cleaned = -0.00011387 Jy ! Component: 3850 - total flux cleaned = -0.000136735 Jy ! Component: 3900 - total flux cleaned = -0.000159526 Jy ! Component: 3950 - total flux cleaned = -0.000167095 Jy ! Component: 4000 - total flux cleaned = -0.000182255 Jy ! Component: 4050 - total flux cleaned = -0.000204972 Jy ! Total flux subtracted in 4096 components = -0.000227639 Jy ! Clean residual min=-0.000485 max=0.000408 Jy/beam ! Clean residual mean=0.000000 rms=0.000137 Jy/beam ! Combined flux in latest and established models = 0.0496208 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 375 components and 0.0496208 Jy ![Exited script file: muppet] wmap "J0426+1257_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.929 x 12.47 at -21.74 degrees (North through East) ! Clean map min=-0.0011371 max=0.047043 Jy/beam ! Writing clean map to FITS file: J0426+1257_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0470431 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000131195 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.836647 0.836647 1.67329 3.34659 6.69318 13.3864 26.7727 53.5454 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.929 x 12.47 at -21.74 degrees (North through East) ! Clean map min=-0.0011371 max=0.047043 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0426+1257_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:13 2019