! Started logfile: J0424-3848_S_2017_10_21_pus_uvs.log on Sat May 11 20:50:03 2019 obs J0424-3848_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0424-3848_S_2017_10_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.575342 visibilities/baseline/integration-bin. ! Found source: J0424-3848 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 6048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0424-3848_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 223 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 150 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 370 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.877495Jy sigma=0.006032 ! Fit after self-cal, rms=0.844417Jy sigma=0.005801 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=27.47 mas, bpa=-25.21 degrees ! Estimated noise=2765.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107884 Jy ! Component: 100 - total flux cleaned = 0.151551 Jy ! Total flux subtracted in 100 components = 0.151551 Jy ! Clean residual min=-0.019258 max=0.024856 Jy/beam ! Clean residual mean=-0.000183 rms=0.007179 Jy/beam ! Combined flux in latest and established models = 0.151551 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.151551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138522Jy sigma=0.000876 ! Fit after self-cal, rms=0.138119Jy sigma=0.000874 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=30.42 mas, bpa=-25.09 degrees ! Estimated noise=1570.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04486 Jy ! Component: 100 - total flux cleaned = 0.0699929 Jy ! Component: 150 - total flux cleaned = 0.0860887 Jy ! Component: 200 - total flux cleaned = 0.0968569 Jy ! Total flux subtracted in 200 components = 0.0968569 Jy ! Clean residual min=-0.012702 max=0.022556 Jy/beam ! Clean residual mean=-0.000280 rms=0.006315 Jy/beam ! Combined flux in latest and established models = 0.248408 Jy ! Performing phase self-cal ! Adding 85 model components to the UV plane model. ! The established model now contains 106 components and 0.248408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120931Jy sigma=0.000766 ! Fit after self-cal, rms=0.120499Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.00* KP 1.34 ! LA 0.90 MK 0.98 NL 1.00* OV 1.01 ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00* KP 1.22 ! LA 0.87 MK 1.00 NL 0.94 OV 1.06 ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.20 ! LA 0.69 MK 1.05 NL 1.19 OV 0.92 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.00* ! LA 0.88 MK 0.99 NL 1.00* OV 1.00* ! PT 0.98 ! ! ! Fit before self-cal, rms=0.120499Jy sigma=0.000764 ! Fit after self-cal, rms=0.109445Jy sigma=0.000726 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.332 mas, bmaj=30.55 mas, bpa=-25.06 degrees ! Estimated noise=1526.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187562 Jy ! Component: 100 - total flux cleaned = 0.00151551 Jy ! Component: 150 - total flux cleaned = 0.00138015 Jy ! Component: 200 - total flux cleaned = 0.001139 Jy ! Total flux subtracted in 200 components = 0.001139 Jy ! Clean residual min=-0.008595 max=0.010505 Jy/beam ! Clean residual mean=0.000040 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 0.249547 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 0.249547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108903Jy sigma=0.000722 ! Fit after self-cal, rms=0.108807Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108807Jy sigma=0.000720 ! Fit after self-cal, rms=0.108638Jy sigma=0.000720 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=30.52 mas, bpa=-25.05 degrees ! Estimated noise=1523.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119229 Jy ! Component: 100 - total flux cleaned = 0.000621705 Jy ! Component: 150 - total flux cleaned = 0.000437465 Jy ! Component: 200 - total flux cleaned = 0.000187154 Jy ! Total flux subtracted in 200 components = 0.000187154 Jy ! Clean residual min=-0.007806 max=0.008517 Jy/beam ! Clean residual mean=0.000033 rms=0.002659 Jy/beam ! Combined flux in latest and established models = 0.249734 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 142 components and 0.249734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108426Jy sigma=0.000718 ! Fit after self-cal, rms=0.108334Jy sigma=0.000718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123651 Jy ! Component: 100 - total flux cleaned = -0.000298212 Jy ! Component: 150 - total flux cleaned = -0.0003005 Jy ! Component: 200 - total flux cleaned = -0.000301274 Jy ! Total flux subtracted in 200 components = -0.000301274 Jy ! Clean residual min=-0.007208 max=0.008142 Jy/beam ! Clean residual mean=0.000030 rms=0.002572 Jy/beam ! Combined flux in latest and established models = 0.249433 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 163 components and 0.249433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108224Jy sigma=0.000717 ! Fit after self-cal, rms=0.108175Jy sigma=0.000717 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108175Jy sigma=0.000717 ! Fit after self-cal, rms=0.108352Jy sigma=0.000717 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.327 mas, bmaj=30.51 mas, bpa=-25.05 degrees ! Estimated noise=1522.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236161 Jy ! Component: 100 - total flux cleaned = 1.77796e-05 Jy ! Component: 150 - total flux cleaned = 1.82667e-05 Jy ! Component: 200 - total flux cleaned = 8.25676e-05 Jy ! Total flux subtracted in 200 components = 8.25676e-05 Jy ! Clean residual min=-0.006945 max=0.007671 Jy/beam ! Clean residual mean=0.000035 rms=0.002480 Jy/beam ! Combined flux in latest and established models = 0.249516 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 173 components and 0.249516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108260Jy sigma=0.000716 ! Fit after self-cal, rms=0.108229Jy sigma=0.000716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000275113 Jy ! Component: 100 - total flux cleaned = -0.000214548 Jy ! Component: 150 - total flux cleaned = -0.000101669 Jy ! Component: 200 - total flux cleaned = -0.000101184 Jy ! Total flux subtracted in 200 components = -0.000101184 Jy ! Clean residual min=-0.006626 max=0.007562 Jy/beam ! Clean residual mean=0.000036 rms=0.002426 Jy/beam ! Combined flux in latest and established models = 0.249415 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 197 components and 0.249415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108168Jy sigma=0.000716 ! Fit after self-cal, rms=0.108143Jy sigma=0.000716 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108143Jy sigma=0.000716 ! Fit after self-cal, rms=0.108418Jy sigma=0.000716 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.5 mas, bmaj=43.61 mas, bpa=-10.27 degrees ! Estimated noise=1832.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000582777 Jy ! Component: 100 - total flux cleaned = 0.000185029 Jy ! Component: 150 - total flux cleaned = 0.000190053 Jy ! Component: 200 - total flux cleaned = 0.000253016 Jy ! Total flux subtracted in 200 components = 0.000253016 Jy ! Clean residual min=-0.008507 max=0.009187 Jy/beam ! Clean residual mean=0.000058 rms=0.003498 Jy/beam ! Combined flux in latest and established models = 0.249668 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 207 components and 0.249668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108397Jy sigma=0.000715 ! Fit after self-cal, rms=0.108356Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.63908e-05 Jy ! Component: 100 - total flux cleaned = -0.000160955 Jy ! Component: 150 - total flux cleaned = -0.000108612 Jy ! Component: 200 - total flux cleaned = -0.000109011 Jy ! Total flux subtracted in 200 components = -0.000109011 Jy ! Clean residual min=-0.008169 max=0.009151 Jy/beam ! Clean residual mean=0.000059 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 0.249559 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 215 components and 0.249559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108347Jy sigma=0.000715 ! Fit after self-cal, rms=0.108324Jy sigma=0.000715 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=30.48 mas, bpa=-25.04 degrees ! Estimated noise=1521.28 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.328 x 30.48 at -25.04 degrees (North through East) ! Clean map min=-0.0074856 max=0.10697 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=27.53 mas, bpa=-25.17 degrees ! Estimated noise=2738.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105623 Jy ! Component: 100 - total flux cleaned = 0.150734 Jy ! Component: 150 - total flux cleaned = 0.17872 Jy ! Component: 200 - total flux cleaned = 0.197993 Jy ! Total flux subtracted in 200 components = 0.197993 Jy ! Clean residual min=-0.015775 max=0.013458 Jy/beam ! Clean residual mean=-0.000047 rms=0.004560 Jy/beam ! Combined flux in latest and established models = 0.197993 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 65 model components to the UV plane model. ! The established model now contains 65 components and 0.197993 Jy ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=30.48 mas, bpa=-25.04 degrees ! Estimated noise=1521.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240745 Jy ! Component: 100 - total flux cleaned = 0.0376486 Jy ! Component: 150 - total flux cleaned = 0.0454776 Jy ! Component: 200 - total flux cleaned = 0.0479082 Jy ! Total flux subtracted in 200 components = 0.0479082 Jy ! Clean residual min=-0.010905 max=0.009771 Jy/beam ! Clean residual mean=0.000036 rms=0.002976 Jy/beam ! Combined flux in latest and established models = 0.245901 Jy ! Adding 84 model components to the UV plane model. ! The established model now contains 139 components and 0.245901 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.5 mas, bmaj=43.61 mas, bpa=-10.27 degrees ! Estimated noise=1832.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043157 Jy ! Component: 100 - total flux cleaned = 0.00521579 Jy ! Component: 150 - total flux cleaned = 0.00590925 Jy ! Component: 200 - total flux cleaned = 0.00602521 Jy ! Total flux subtracted in 200 components = 0.00602521 Jy ! Clean residual min=-0.011466 max=0.011012 Jy/beam ! Clean residual mean=0.000086 rms=0.003857 Jy/beam ! Combined flux in latest and established models = 0.251927 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105738 Jy ! Component: 100 - total flux cleaned = -0.000204957 Jy ! Component: 150 - total flux cleaned = -0.00030356 Jy ! Component: 200 - total flux cleaned = -0.000482231 Jy ! Total flux subtracted in 200 components = -0.000482231 Jy ! Clean residual min=-0.010632 max=0.010459 Jy/beam ! Clean residual mean=0.000078 rms=0.003731 Jy/beam ! Combined flux in latest and established models = 0.251444 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 181 components and 0.251444 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.328 mas, bmaj=30.48 mas, bpa=-25.04 degrees ! Estimated noise=1521.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503274 Jy ! Component: 100 - total flux cleaned = 0.000312848 Jy ! Component: 150 - total flux cleaned = 0.000138231 Jy ! Component: 200 - total flux cleaned = 5.70436e-05 Jy ! Total flux subtracted in 200 components = 5.70436e-05 Jy ! Clean residual min=-0.007199 max=0.007939 Jy/beam ! Clean residual mean=0.000046 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 0.251501 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 201 components and 0.251501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108604Jy sigma=0.000716 ! Fit after self-cal, rms=0.108522Jy sigma=0.000716 wmodel J0424-3848_S_2017_10_21_pus_map.mod ! Writing 201 model components to file: J0424-3848_S_2017_10_21_pus_map.mod wobs J0424-3848_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0424-3848_S_2017_10_21_pus_uvs.fits wwins J0424-3848_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0424-3848_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579431 Jy ! Component: 100 - total flux cleaned = 0.000240641 Jy ! Component: 150 - total flux cleaned = 0.000240051 Jy ! Component: 200 - total flux cleaned = 0.000709006 Jy ! Component: 250 - total flux cleaned = 0.00140153 Jy ! Component: 300 - total flux cleaned = 0.00212653 Jy ! Component: 350 - total flux cleaned = 0.00265346 Jy ! Component: 400 - total flux cleaned = 0.00308165 Jy ! Component: 450 - total flux cleaned = 0.00355616 Jy ! Component: 500 - total flux cleaned = 0.00419264 Jy ! Component: 550 - total flux cleaned = 0.00467369 Jy ! Component: 600 - total flux cleaned = 0.00518759 Jy ! Component: 650 - total flux cleaned = 0.00567498 Jy ! Component: 700 - total flux cleaned = 0.00593269 Jy ! Component: 750 - total flux cleaned = 0.00632649 Jy ! Component: 800 - total flux cleaned = 0.00656118 Jy ! Component: 850 - total flux cleaned = 0.00678707 Jy ! Component: 900 - total flux cleaned = 0.00704666 Jy ! Component: 950 - total flux cleaned = 0.00729457 Jy ! Component: 1000 - total flux cleaned = 0.00753091 Jy ! Component: 1050 - total flux cleaned = 0.0076827 Jy ! Component: 1100 - total flux cleaned = 0.00772083 Jy ! Component: 1150 - total flux cleaned = 0.00779124 Jy ! Component: 1200 - total flux cleaned = 0.00775733 Jy ! Component: 1250 - total flux cleaned = 0.0077576 Jy ! Component: 1300 - total flux cleaned = 0.00775772 Jy ! Component: 1350 - total flux cleaned = 0.00781913 Jy ! Component: 1400 - total flux cleaned = 0.00793589 Jy ! Component: 1450 - total flux cleaned = 0.00796346 Jy ! Component: 1500 - total flux cleaned = 0.00796371 Jy ! Component: 1550 - total flux cleaned = 0.00793767 Jy ! Component: 1600 - total flux cleaned = 0.00791261 Jy ! Component: 1650 - total flux cleaned = 0.00791289 Jy ! Component: 1700 - total flux cleaned = 0.00796184 Jy ! Component: 1750 - total flux cleaned = 0.00788916 Jy ! Component: 1800 - total flux cleaned = 0.00791289 Jy ! Component: 1850 - total flux cleaned = 0.0079131 Jy ! Component: 1900 - total flux cleaned = 0.00791329 Jy ! Component: 1950 - total flux cleaned = 0.0079358 Jy ! Component: 2000 - total flux cleaned = 0.00793545 Jy ! Component: 2050 - total flux cleaned = 0.00789229 Jy ! Component: 2100 - total flux cleaned = 0.00778614 Jy ! Component: 2150 - total flux cleaned = 0.0077227 Jy ! Component: 2200 - total flux cleaned = 0.00774377 Jy ! Component: 2250 - total flux cleaned = 0.00767999 Jy ! Component: 2300 - total flux cleaned = 0.0076155 Jy ! Component: 2350 - total flux cleaned = 0.00759374 Jy ! Component: 2400 - total flux cleaned = 0.00757215 Jy ! Component: 2450 - total flux cleaned = 0.00750681 Jy ! Component: 2500 - total flux cleaned = 0.00752934 Jy ! Component: 2550 - total flux cleaned = 0.00757463 Jy ! Component: 2600 - total flux cleaned = 0.00766655 Jy ! Component: 2650 - total flux cleaned = 0.0077371 Jy ! Component: 2700 - total flux cleaned = 0.00778565 Jy ! Component: 2750 - total flux cleaned = 0.00785932 Jy ! Component: 2800 - total flux cleaned = 0.00790952 Jy ! Component: 2850 - total flux cleaned = 0.00796084 Jy ! Component: 2900 - total flux cleaned = 0.00804 Jy ! Component: 2950 - total flux cleaned = 0.00809424 Jy ! Component: 3000 - total flux cleaned = 0.00814971 Jy ! Component: 3050 - total flux cleaned = 0.00823533 Jy ! Component: 3100 - total flux cleaned = 0.00829433 Jy ! Component: 3150 - total flux cleaned = 0.00835439 Jy ! Component: 3200 - total flux cleaned = 0.00838542 Jy ! Component: 3250 - total flux cleaned = 0.00841715 Jy ! Component: 3300 - total flux cleaned = 0.00845037 Jy ! Component: 3350 - total flux cleaned = 0.00845064 Jy ! Component: 3400 - total flux cleaned = 0.00848582 Jy ! Component: 3450 - total flux cleaned = 0.00852212 Jy ! Component: 3500 - total flux cleaned = 0.00855996 Jy ! Component: 3550 - total flux cleaned = 0.00856028 Jy ! Component: 3600 - total flux cleaned = 0.00859965 Jy ! Component: 3650 - total flux cleaned = 0.00859888 Jy ! Component: 3700 - total flux cleaned = 0.00868397 Jy ! Component: 3750 - total flux cleaned = 0.00868424 Jy ! Component: 3800 - total flux cleaned = 0.00877479 Jy ! Component: 3850 - total flux cleaned = 0.00877471 Jy ! Component: 3900 - total flux cleaned = 0.00882334 Jy ! Component: 3950 - total flux cleaned = 0.00892362 Jy ! Component: 4000 - total flux cleaned = 0.0089748 Jy ! Component: 4050 - total flux cleaned = 0.00902797 Jy ! Total flux subtracted in 4096 components = 0.00908319 Jy ! Clean residual min=-0.003086 max=0.003005 Jy/beam ! Clean residual mean=0.000083 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.260585 Jy keep ! Adding 380 model components to the UV plane model. ! The established model now contains 581 components and 0.260584 Jy ![Exited script file: muppet] wmap "J0424-3848_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.328 x 30.48 at -25.04 degrees (North through East) ! Clean map min=-0.0048566 max=0.079506 Jy/beam ! Writing clean map to FITS file: J0424-3848_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0795061 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000950749 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -3.58746 3.58746 7.17491 14.3498 28.6996 57.3993 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.079 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.328 x 30.48 at -25.04 degrees (North through East) ! Clean map min=-0.0048566 max=0.079506 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0424-3848_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:50:08 2019