! Started logfile: J0424-3848_S_2017_10_09_pus_uvs.log on Sun May 12 13:04:08 2019 obs J0424-3848_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0424-3848_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.537165 visibilities/baseline/integration-bin. ! Found source: J0424-3848 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 11216 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0424-3848_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 331 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 360 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 850 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.910135Jy sigma=0.005444 ! Fit after self-cal, rms=0.868601Jy sigma=0.005186 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.43 mas, bmaj=15.1 mas, bpa=-23.04 degrees ! Estimated noise=2005.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0922219 Jy ! Component: 100 - total flux cleaned = 0.131552 Jy ! Total flux subtracted in 100 components = 0.131552 Jy ! Clean residual min=-0.016061 max=0.022974 Jy/beam ! Clean residual mean=-0.000811 rms=0.006270 Jy/beam ! Combined flux in latest and established models = 0.131552 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.131552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148762Jy sigma=0.000849 ! Fit after self-cal, rms=0.148573Jy sigma=0.000848 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=17.51 mas, bpa=-22.3 degrees ! Estimated noise=1297.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500851 Jy ! Component: 100 - total flux cleaned = 0.0805721 Jy ! Component: 150 - total flux cleaned = 0.100028 Jy ! Component: 200 - total flux cleaned = 0.112522 Jy ! Total flux subtracted in 200 components = 0.112522 Jy ! Clean residual min=-0.016703 max=0.022066 Jy/beam ! Clean residual mean=-0.000287 rms=0.005582 Jy/beam ! Combined flux in latest and established models = 0.244074 Jy ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 100 components and 0.244074 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130742Jy sigma=0.000718 ! Fit after self-cal, rms=0.130033Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.66 FD 0.79 HN 0.72 KP 1.29 ! LA 0.93 MK 1.05 NL 1.19 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 3.63 FD 0.80 HN 0.86 KP 1.27 ! LA 0.86 MK 1.10 NL 1.36 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 2.52 FD 0.82 HN 0.77 KP 1.14 ! LA 0.70 MK 1.12 NL 1.55 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 291 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.73 KP 1.00* ! LA 1.00* MK 1.08 NL 1.00* OV 1.00* ! PT 0.92 ! ! ! Fit before self-cal, rms=0.130033Jy sigma=0.000714 ! Fit after self-cal, rms=0.167364Jy sigma=0.000652 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=17.82 mas, bpa=-22.05 degrees ! Estimated noise=1369.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00221771 Jy ! Component: 100 - total flux cleaned = -0.00208325 Jy ! Component: 150 - total flux cleaned = -0.00208437 Jy ! Component: 200 - total flux cleaned = -0.00219991 Jy ! Total flux subtracted in 200 components = -0.00219991 Jy ! Clean residual min=-0.010110 max=0.012478 Jy/beam ! Clean residual mean=0.000039 rms=0.002700 Jy/beam ! Combined flux in latest and established models = 0.241874 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 110 components and 0.241874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167046Jy sigma=0.000651 ! Fit after self-cal, rms=0.168399Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168399Jy sigma=0.000648 ! Fit after self-cal, rms=0.175792Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=17.96 mas, bpa=-22.05 degrees ! Estimated noise=1380.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143983 Jy ! Component: 100 - total flux cleaned = -0.00144695 Jy ! Component: 150 - total flux cleaned = -0.00145619 Jy ! Component: 200 - total flux cleaned = -0.00146383 Jy ! Total flux subtracted in 200 components = -0.00146383 Jy ! Clean residual min=-0.009315 max=0.010241 Jy/beam ! Clean residual mean=0.000040 rms=0.002476 Jy/beam ! Combined flux in latest and established models = 0.24041 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 115 components and 0.24041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175565Jy sigma=0.000646 ! Fit after self-cal, rms=0.175651Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000219302 Jy ! Component: 100 - total flux cleaned = -0.000319769 Jy ! Component: 150 - total flux cleaned = -0.000408753 Jy ! Component: 200 - total flux cleaned = -0.000491546 Jy ! Total flux subtracted in 200 components = -0.000491546 Jy ! Clean residual min=-0.009168 max=0.009970 Jy/beam ! Clean residual mean=0.000036 rms=0.002445 Jy/beam ! Combined flux in latest and established models = 0.239919 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 119 components and 0.239919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175494Jy sigma=0.000646 ! Fit after self-cal, rms=0.175460Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.175460Jy sigma=0.000646 ! Fit after self-cal, rms=0.179880Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.137 mas, bmaj=18.18 mas, bpa=-22.11 degrees ! Estimated noise=1390.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00130434 Jy ! Component: 100 - total flux cleaned = -0.00130553 Jy ! Component: 150 - total flux cleaned = -0.00130803 Jy ! Component: 200 - total flux cleaned = -0.00138966 Jy ! Total flux subtracted in 200 components = -0.00138966 Jy ! Clean residual min=-0.009177 max=0.009735 Jy/beam ! Clean residual mean=0.000040 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 0.238529 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 121 components and 0.238529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179706Jy sigma=0.000645 ! Fit after self-cal, rms=0.179716Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.78735e-05 Jy ! Component: 100 - total flux cleaned = -0.000129917 Jy ! Component: 150 - total flux cleaned = -0.000283739 Jy ! Component: 200 - total flux cleaned = -0.000356011 Jy ! Total flux subtracted in 200 components = -0.000356011 Jy ! Clean residual min=-0.009121 max=0.009512 Jy/beam ! Clean residual mean=0.000038 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 0.238173 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 123 components and 0.238173 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179588Jy sigma=0.000644 ! Fit after self-cal, rms=0.179564Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179564Jy sigma=0.000644 ! Fit after self-cal, rms=0.183393Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.664 mas, bmaj=39.62 mas, bpa=-8.554 degrees ! Estimated noise=1691.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000951476 Jy ! Component: 100 - total flux cleaned = -0.000897353 Jy ! Component: 150 - total flux cleaned = -0.000798103 Jy ! Component: 200 - total flux cleaned = -0.000795539 Jy ! Total flux subtracted in 200 components = -0.000795539 Jy ! Clean residual min=-0.009916 max=0.011144 Jy/beam ! Clean residual mean=0.000074 rms=0.003589 Jy/beam ! Combined flux in latest and established models = 0.237378 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 132 components and 0.237378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183370Jy sigma=0.000644 ! Fit after self-cal, rms=0.183404Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000237136 Jy ! Component: 100 - total flux cleaned = -0.00023524 Jy ! Component: 150 - total flux cleaned = -0.000235263 Jy ! Component: 200 - total flux cleaned = -0.0002766 Jy ! Total flux subtracted in 200 components = -0.0002766 Jy ! Clean residual min=-0.009882 max=0.011057 Jy/beam ! Clean residual mean=0.000070 rms=0.003583 Jy/beam ! Combined flux in latest and established models = 0.237101 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 142 components and 0.237101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183384Jy sigma=0.000644 ! Fit after self-cal, rms=0.183399Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=18.33 mas, bpa=-22.2 degrees ! Estimated noise=1399.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 18.33 at -22.2 degrees (North through East) ! Clean map min=-0.0089049 max=0.1056 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.452 mas, bmaj=15.22 mas, bpa=-23 degrees ! Estimated noise=2219.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0983982 Jy ! Component: 100 - total flux cleaned = 0.141035 Jy ! Component: 150 - total flux cleaned = 0.169158 Jy ! Component: 200 - total flux cleaned = 0.188324 Jy ! Total flux subtracted in 200 components = 0.188324 Jy ! Clean residual min=-0.010919 max=0.011468 Jy/beam ! Clean residual mean=-0.000298 rms=0.003138 Jy/beam ! Combined flux in latest and established models = 0.188324 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 0.188324 Jy ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=18.33 mas, bpa=-22.2 degrees ! Estimated noise=1399.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205092 Jy ! Component: 100 - total flux cleaned = 0.0314039 Jy ! Component: 150 - total flux cleaned = 0.0374882 Jy ! Component: 200 - total flux cleaned = 0.040908 Jy ! Total flux subtracted in 200 components = 0.040908 Jy ! Clean residual min=-0.008656 max=0.009541 Jy/beam ! Clean residual mean=-0.000018 rms=0.002473 Jy/beam ! Combined flux in latest and established models = 0.229232 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 77 components and 0.229232 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.664 mas, bmaj=39.62 mas, bpa=-8.554 degrees ! Estimated noise=1691.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00264059 Jy ! Component: 100 - total flux cleaned = 0.0029577 Jy ! Component: 150 - total flux cleaned = 0.00315694 Jy ! Component: 200 - total flux cleaned = 0.00328021 Jy ! Total flux subtracted in 200 components = 0.00328021 Jy ! Clean residual min=-0.009320 max=0.011126 Jy/beam ! Clean residual mean=0.000007 rms=0.003614 Jy/beam ! Combined flux in latest and established models = 0.232512 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116783 Jy ! Component: 100 - total flux cleaned = 0.000280529 Jy ! Component: 150 - total flux cleaned = 0.000383051 Jy ! Component: 200 - total flux cleaned = 0.000481137 Jy ! Total flux subtracted in 200 components = 0.000481137 Jy ! Clean residual min=-0.009383 max=0.011077 Jy/beam ! Clean residual mean=0.000014 rms=0.003593 Jy/beam ! Combined flux in latest and established models = 0.232993 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 90 components and 0.232993 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.142 mas, bmaj=18.33 mas, bpa=-22.2 degrees ! Estimated noise=1399.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000487993 Jy ! Component: 100 - total flux cleaned = -0.000586836 Jy ! Component: 150 - total flux cleaned = -0.000664121 Jy ! Component: 200 - total flux cleaned = -0.000726401 Jy ! Total flux subtracted in 200 components = -0.000726401 Jy ! Clean residual min=-0.008408 max=0.008926 Jy/beam ! Clean residual mean=0.000004 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 0.232267 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.232267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183219Jy sigma=0.000644 ! Fit after self-cal, rms=0.182980Jy sigma=0.000644 wmodel J0424-3848_S_2017_10_09_pus_map.mod ! Writing 100 model components to file: J0424-3848_S_2017_10_09_pus_map.mod wobs J0424-3848_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0424-3848_S_2017_10_09_pus_uvs.fits wwins J0424-3848_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0424-3848_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287528 Jy ! Component: 100 - total flux cleaned = 0.00471465 Jy ! Component: 150 - total flux cleaned = 0.00633937 Jy ! Component: 200 - total flux cleaned = 0.00793219 Jy ! Component: 250 - total flux cleaned = 0.00930174 Jy ! Component: 300 - total flux cleaned = 0.0106914 Jy ! Component: 350 - total flux cleaned = 0.0120116 Jy ! Component: 400 - total flux cleaned = 0.0129963 Jy ! Component: 450 - total flux cleaned = 0.014023 Jy ! Component: 500 - total flux cleaned = 0.0146796 Jy ! Component: 550 - total flux cleaned = 0.015152 Jy ! Component: 600 - total flux cleaned = 0.0156822 Jy ! Component: 650 - total flux cleaned = 0.0159741 Jy ! Component: 700 - total flux cleaned = 0.016185 Jy ! Component: 750 - total flux cleaned = 0.0163886 Jy ! Component: 800 - total flux cleaned = 0.0166501 Jy ! Component: 850 - total flux cleaned = 0.0168368 Jy ! Component: 900 - total flux cleaned = 0.0168966 Jy ! Component: 950 - total flux cleaned = 0.017133 Jy ! Component: 1000 - total flux cleaned = 0.0173611 Jy ! Component: 1050 - total flux cleaned = 0.017582 Jy ! Component: 1100 - total flux cleaned = 0.0178497 Jy ! Component: 1150 - total flux cleaned = 0.018109 Jy ! Component: 1200 - total flux cleaned = 0.0182597 Jy ! Component: 1250 - total flux cleaned = 0.0185557 Jy ! Component: 1300 - total flux cleaned = 0.0188439 Jy ! Component: 1350 - total flux cleaned = 0.019171 Jy ! Component: 1400 - total flux cleaned = 0.0193533 Jy ! Component: 1450 - total flux cleaned = 0.0197551 Jy ! Component: 1500 - total flux cleaned = 0.0200167 Jy ! Component: 1550 - total flux cleaned = 0.0202722 Jy ! Component: 1600 - total flux cleaned = 0.0205649 Jy ! Component: 1650 - total flux cleaned = 0.0207687 Jy ! Component: 1700 - total flux cleaned = 0.020889 Jy ! Component: 1750 - total flux cleaned = 0.0210846 Jy ! Component: 1800 - total flux cleaned = 0.0211233 Jy ! Component: 1850 - total flux cleaned = 0.0212364 Jy ! Component: 1900 - total flux cleaned = 0.021273 Jy ! Component: 1950 - total flux cleaned = 0.0213455 Jy ! Component: 2000 - total flux cleaned = 0.0214166 Jy ! Component: 2050 - total flux cleaned = 0.0214173 Jy ! Component: 2100 - total flux cleaned = 0.0215203 Jy ! Component: 2150 - total flux cleaned = 0.0214522 Jy ! Component: 2200 - total flux cleaned = 0.0214853 Jy ! Component: 2250 - total flux cleaned = 0.0215181 Jy ! Component: 2300 - total flux cleaned = 0.0215178 Jy ! Component: 2350 - total flux cleaned = 0.0215809 Jy ! Component: 2400 - total flux cleaned = 0.0215495 Jy ! Component: 2450 - total flux cleaned = 0.0215799 Jy ! Component: 2500 - total flux cleaned = 0.0216712 Jy ! Component: 2550 - total flux cleaned = 0.0217913 Jy ! Component: 2600 - total flux cleaned = 0.0218804 Jy ! Component: 2650 - total flux cleaned = 0.0220278 Jy ! Component: 2700 - total flux cleaned = 0.0221735 Jy ! Component: 2750 - total flux cleaned = 0.0223464 Jy ! Component: 2800 - total flux cleaned = 0.0224888 Jy ! Component: 2850 - total flux cleaned = 0.0226574 Jy ! Component: 2900 - total flux cleaned = 0.0227687 Jy ! Component: 2950 - total flux cleaned = 0.0229069 Jy ! Component: 3000 - total flux cleaned = 0.0229893 Jy ! Component: 3050 - total flux cleaned = 0.0230435 Jy ! Component: 3100 - total flux cleaned = 0.0231242 Jy ! Component: 3150 - total flux cleaned = 0.0231775 Jy ! Component: 3200 - total flux cleaned = 0.0232568 Jy ! Component: 3250 - total flux cleaned = 0.0233618 Jy ! Component: 3300 - total flux cleaned = 0.0234925 Jy ! Component: 3350 - total flux cleaned = 0.0236225 Jy ! Component: 3400 - total flux cleaned = 0.0238038 Jy ! Component: 3450 - total flux cleaned = 0.0239072 Jy ! Component: 3500 - total flux cleaned = 0.0240875 Jy ! Component: 3550 - total flux cleaned = 0.0242161 Jy ! Component: 3600 - total flux cleaned = 0.0243188 Jy ! Component: 3650 - total flux cleaned = 0.0244725 Jy ! Component: 3700 - total flux cleaned = 0.0246001 Jy ! Component: 3750 - total flux cleaned = 0.0246768 Jy ! Component: 3800 - total flux cleaned = 0.0247788 Jy ! Component: 3850 - total flux cleaned = 0.0249061 Jy ! Component: 3900 - total flux cleaned = 0.0249567 Jy ! Component: 3950 - total flux cleaned = 0.0250331 Jy ! Component: 4000 - total flux cleaned = 0.0251091 Jy ! Component: 4050 - total flux cleaned = 0.025109 Jy ! Total flux subtracted in 4096 components = 0.0252106 Jy ! Clean residual min=-0.001485 max=0.001301 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.257477 Jy keep ! Adding 382 model components to the UV plane model. ! The established model now contains 482 components and 0.257477 Jy ![Exited script file: muppet] wmap "J0424-3848_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 18.33 at -22.2 degrees (North through East) ! Clean map min=-0.0029302 max=0.11575 Jy/beam ! Writing clean map to FITS file: J0424-3848_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11575 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000496469 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.28675 1.28675 2.5735 5.14701 10.294 20.588 41.176 82.3521 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.142 x 18.33 at -22.2 degrees (North through East) ! Clean map min=-0.0029302 max=0.11575 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0424-3848_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:04:13 2019