! Started logfile: J0423-0120_X_2017_03_27_pus_uvs.log on Sat Apr 27 21:58:03 2019 obs J0423-0120_X_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0423-0120_X_2017_03_27_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0423-0120 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1844 lines of history. ! ! Reading 7488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0423-0120_X_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.342650Jy sigma=0.002973 ! Fit after self-cal, rms=0.325228Jy sigma=0.002816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.6593 mas, bmaj=1.71 mas, bpa=-0.7781 degrees ! Estimated noise=1363.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.546402 Jy ! Component: 100 - total flux cleaned = 0.712321 Jy ! Total flux subtracted in 100 components = 0.712321 Jy ! Clean residual min=-0.035747 max=0.076387 Jy/beam ! Clean residual mean=-0.000213 rms=0.010374 Jy/beam ! Combined flux in latest and established models = 0.712322 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.712322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.213498Jy sigma=0.001815 ! Fit after self-cal, rms=0.213113Jy sigma=0.001812 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0899733 Jy ! Component: 100 - total flux cleaned = 0.14349 Jy ! Total flux subtracted in 100 components = 0.14349 Jy ! Clean residual min=-0.023559 max=0.050860 Jy/beam ! Clean residual mean=-0.000116 rms=0.006509 Jy/beam ! Combined flux in latest and established models = 0.855812 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.855812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.149095Jy sigma=0.001233 ! Fit after self-cal, rms=0.148526Jy sigma=0.001231 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (-0.8, -3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483511 Jy ! Component: 100 - total flux cleaned = 0.0817861 Jy ! Total flux subtracted in 100 components = 0.0817861 Jy ! Clean residual min=-0.019519 max=0.032405 Jy/beam ! Clean residual mean=-0.000079 rms=0.004622 Jy/beam ! Combined flux in latest and established models = 0.937598 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.937598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122674Jy sigma=0.001003 ! Fit after self-cal, rms=0.122207Jy sigma=0.000999 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (0.8, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318076 Jy ! Component: 100 - total flux cleaned = 0.0538397 Jy ! Total flux subtracted in 100 components = 0.0538397 Jy ! Clean residual min=-0.015961 max=0.015521 Jy/beam ! Clean residual mean=-0.000048 rms=0.003521 Jy/beam ! Combined flux in latest and established models = 0.991437 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 40 components and 0.991437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.109069Jy sigma=0.000884 ! Fit after self-cal, rms=0.108569Jy sigma=0.000880 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8259 mas, bmaj=1.977 mas, bpa=1.258 degrees ! Estimated noise=960.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265055 Jy ! Component: 100 - total flux cleaned = 0.0432438 Jy ! Component: 150 - total flux cleaned = 0.0547702 Jy ! Component: 200 - total flux cleaned = 0.062206 Jy ! Total flux subtracted in 200 components = 0.062206 Jy ! Clean residual min=-0.010561 max=0.010830 Jy/beam ! Clean residual mean=-0.000039 rms=0.002969 Jy/beam ! Combined flux in latest and established models = 1.05364 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 62 components and 1.05364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100471Jy sigma=0.000816 ! Fit after self-cal, rms=0.100137Jy sigma=0.000813 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.03 KP 0.97 ! LA 0.97 MK 0.99 NL 0.99 OV 1.00 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.98 KP 1.00 ! LA 0.97 MK 1.00 NL 1.00 OV 0.99 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 0.93 ! LA 1.00 MK 1.02 NL 0.98 OV 1.00 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.04 KP 0.97 ! LA 1.00 MK 1.02 NL 0.99 OV 0.99 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 0.99 KP 0.97 ! LA 0.99 MK 1.05 NL 0.99 OV 1.00 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.04 KP 0.96 ! LA 0.99 MK 1.02 NL 0.98 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 0.99 KP 0.96 ! LA 1.00 MK 1.03 NL 1.00 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.00 KP 0.97 ! LA 0.98 MK 1.02 NL 0.98 OV 1.00 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 0.96 ! LA 0.99 MK 0.99 NL 0.99 OV 1.01 ! PT 1.00 SC 0.97 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.96 HN 1.05 KP 0.88 ! LA 0.99 MK 0.99 NL 0.87 OV 1.10 ! PT 1.07 SC 0.94 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.06 HN 1.09 KP 0.98 ! LA 1.07 MK 1.06 NL 0.94 OV 1.15 ! PT 1.16 SC 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.01 KP 0.96 ! LA 1.03 MK 0.91 NL 0.92 OV 1.11 ! PT 1.12 SC 1.01 ! ! ! Fit before self-cal, rms=0.100137Jy sigma=0.000813 ! Fit after self-cal, rms=0.086130Jy sigma=0.000701 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8302 mas, bmaj=1.981 mas, bpa=1.208 degrees ! Estimated noise=956.352 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701329 Jy ! Component: 100 - total flux cleaned = 0.00970146 Jy ! Component: 150 - total flux cleaned = 0.010911 Jy ! Component: 200 - total flux cleaned = 0.0106083 Jy ! Total flux subtracted in 200 components = 0.0106083 Jy ! Clean residual min=-0.007001 max=0.007272 Jy/beam ! Clean residual mean=0.000003 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 1.06425 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 78 components and 1.06425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084643Jy sigma=0.000688 ! Fit after self-cal, rms=0.084499Jy sigma=0.000687 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084499Jy sigma=0.000687 ! Fit after self-cal, rms=0.082547Jy sigma=0.000674 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.83 mas, bmaj=1.98 mas, bpa=1.19 degrees ! Estimated noise=957.107 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00547521 Jy ! Component: 100 - total flux cleaned = 0.00684711 Jy ! Component: 150 - total flux cleaned = 0.00717667 Jy ! Component: 200 - total flux cleaned = 0.00727637 Jy ! Total flux subtracted in 200 components = 0.00727637 Jy ! Clean residual min=-0.005691 max=0.006707 Jy/beam ! Clean residual mean=0.000004 rms=0.001518 Jy/beam ! Combined flux in latest and established models = 1.07153 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 92 components and 1.07153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082069Jy sigma=0.000670 ! Fit after self-cal, rms=0.082019Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (7, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00638647 Jy ! Component: 100 - total flux cleaned = 0.00957884 Jy ! Component: 150 - total flux cleaned = 0.011084 Jy ! Component: 200 - total flux cleaned = 0.0120718 Jy ! Total flux subtracted in 200 components = 0.0120718 Jy ! Clean residual min=-0.004816 max=0.005258 Jy/beam ! Clean residual mean=-0.000001 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 1.0836 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 117 components and 1.0836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081466Jy sigma=0.000665 ! Fit after self-cal, rms=0.081426Jy sigma=0.000664 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081426Jy sigma=0.000664 ! Fit after self-cal, rms=0.080886Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8295 mas, bmaj=1.979 mas, bpa=1.167 degrees ! Estimated noise=957.298 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.003613 Jy ! Component: 100 - total flux cleaned = 0.00471758 Jy ! Component: 150 - total flux cleaned = 0.00505132 Jy ! Component: 200 - total flux cleaned = 0.00534655 Jy ! Total flux subtracted in 200 components = 0.00534655 Jy ! Clean residual min=-0.004322 max=0.005269 Jy/beam ! Clean residual mean=-0.000003 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 1.08895 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 127 components and 1.08895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080657Jy sigma=0.000660 ! Fit after self-cal, rms=0.080628Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -20.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446601 Jy ! Component: 100 - total flux cleaned = 0.00622681 Jy ! Component: 150 - total flux cleaned = 0.00733054 Jy ! Component: 200 - total flux cleaned = 0.00789632 Jy ! Total flux subtracted in 200 components = 0.00789632 Jy ! Clean residual min=-0.003775 max=0.004701 Jy/beam ! Clean residual mean=-0.000004 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 1.09684 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 146 components and 1.09684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080303Jy sigma=0.000657 ! Fit after self-cal, rms=0.080295Jy sigma=0.000656 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080295Jy sigma=0.000656 ! Fit after self-cal, rms=0.080283Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.15 mas, bmaj=3.392 mas, bpa=-2.004 degrees ! Estimated noise=1264.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00354016 Jy ! Component: 100 - total flux cleaned = 0.00456567 Jy ! Component: 150 - total flux cleaned = 0.00474296 Jy ! Component: 200 - total flux cleaned = 0.004668 Jy ! Total flux subtracted in 200 components = 0.004668 Jy ! Clean residual min=-0.004267 max=0.004755 Jy/beam ! Clean residual mean=-0.000007 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 1.10151 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 163 components and 1.10151 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080217Jy sigma=0.000656 ! Fit after self-cal, rms=0.080200Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8247e-05 Jy ! Component: 100 - total flux cleaned = 3.85499e-05 Jy ! Component: 150 - total flux cleaned = -8.77481e-05 Jy ! Component: 200 - total flux cleaned = -0.000201458 Jy ! Total flux subtracted in 200 components = -0.000201458 Jy ! Clean residual min=-0.004147 max=0.004337 Jy/beam ! Clean residual mean=-0.000007 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 1.10131 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 174 components and 1.10131 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080200Jy sigma=0.000655 ! Fit after self-cal, rms=0.080189Jy sigma=0.000655 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8293 mas, bmaj=1.979 mas, bpa=1.148 degrees ! Estimated noise=957.422 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8293 x 1.979 at 1.148 degrees (North through East) ! Clean map min=-0.0092117 max=0.73194 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.080189Jy sigma=0.000655 ! Fit after self-cal, rms=0.076119Jy sigma=0.000618 ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8296 mas, bmaj=1.979 mas, bpa=1.111 degrees ! Estimated noise=958.377 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186366 Jy ! Component: 100 - total flux cleaned = 0.00210201 Jy ! Component: 150 - total flux cleaned = 0.00244957 Jy ! Component: 200 - total flux cleaned = 0.00270252 Jy ! Total flux subtracted in 200 components = 0.00270252 Jy ! Clean residual min=-0.003644 max=0.004291 Jy/beam ! Clean residual mean=-0.000005 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 1.10401 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 184 components and 1.10401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075977Jy sigma=0.000617 ! Fit after self-cal, rms=0.075973Jy sigma=0.000617 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150027 Jy ! Component: 100 - total flux cleaned = 0.000210097 Jy ! Component: 150 - total flux cleaned = 0.000266759 Jy ! Component: 200 - total flux cleaned = 0.000374549 Jy ! Total flux subtracted in 200 components = 0.000374549 Jy ! Clean residual min=-0.003507 max=0.004175 Jy/beam ! Clean residual mean=-0.000004 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 1.10439 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 191 components and 1.10439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075883Jy sigma=0.000616 ! Fit after self-cal, rms=0.075879Jy sigma=0.000616 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075879Jy sigma=0.000616 ! Fit after self-cal, rms=0.075845Jy sigma=0.000616 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.661 mas, bmaj=1.71 mas, bpa=-0.9072 degrees ! Estimated noise=1365.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.547789 Jy ! Component: 100 - total flux cleaned = 0.714536 Jy ! Component: 150 - total flux cleaned = 0.806367 Jy ! Component: 200 - total flux cleaned = 0.867799 Jy ! Total flux subtracted in 200 components = 0.867799 Jy ! Clean residual min=-0.019977 max=0.034575 Jy/beam ! Clean residual mean=-0.000106 rms=0.005563 Jy/beam ! Combined flux in latest and established models = 0.867799 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.867799 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8293 mas, bmaj=1.979 mas, bpa=1.105 degrees ! Estimated noise=958.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.067805 Jy ! Component: 100 - total flux cleaned = 0.111461 Jy ! Component: 150 - total flux cleaned = 0.141256 Jy ! Component: 200 - total flux cleaned = 0.162068 Jy ! Total flux subtracted in 200 components = 0.162068 Jy ! Clean residual min=-0.008099 max=0.011624 Jy/beam ! Clean residual mean=-0.000051 rms=0.002577 Jy/beam ! Combined flux in latest and established models = 1.02987 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 68 components and 1.02987 Jy ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149904 Jy ! Component: 100 - total flux cleaned = 0.0261102 Jy ! Component: 150 - total flux cleaned = 0.0347561 Jy ! Component: 200 - total flux cleaned = 0.0406613 Jy ! Total flux subtracted in 200 components = 0.0406613 Jy ! Clean residual min=-0.005844 max=0.006324 Jy/beam ! Clean residual mean=-0.000017 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 1.07053 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 96 components and 1.07053 Jy ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Added new window around map position (0.8, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00645724 Jy ! Component: 100 - total flux cleaned = 0.0105722 Jy ! Component: 150 - total flux cleaned = 0.014525 Jy ! Component: 200 - total flux cleaned = 0.0178431 Jy ! Total flux subtracted in 200 components = 0.0178431 Jy ! Clean residual min=-0.004210 max=0.003806 Jy/beam ! Clean residual mean=-0.000008 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 1.08837 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 133 components and 1.08837 Jy ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=2.148 mas, bmaj=3.39 mas, bpa=-2.042 degrees ! Estimated noise=1266.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00601303 Jy ! Component: 100 - total flux cleaned = 0.0102821 Jy ! Component: 150 - total flux cleaned = 0.0128701 Jy ! Component: 200 - total flux cleaned = 0.0145632 Jy ! Total flux subtracted in 200 components = 0.0145632 Jy ! Clean residual min=-0.004559 max=0.003468 Jy/beam ! Clean residual mean=-0.000007 rms=0.001293 Jy/beam ! Combined flux in latest and established models = 1.10293 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152841 Jy ! Component: 100 - total flux cleaned = 0.00276309 Jy ! Component: 150 - total flux cleaned = 0.00391454 Jy ! Component: 200 - total flux cleaned = 0.00479839 Jy ! Total flux subtracted in 200 components = 0.00479839 Jy ! Clean residual min=-0.003863 max=0.003274 Jy/beam ! Clean residual mean=-0.000007 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 1.10773 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 177 components and 1.10773 Jy ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! Estimated beam: bmin=0.8293 mas, bmaj=1.979 mas, bpa=1.105 degrees ! Estimated noise=958.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000700518 Jy ! Component: 100 - total flux cleaned = -3.31998e-05 Jy ! Component: 150 - total flux cleaned = 0.000472735 Jy ! Component: 200 - total flux cleaned = 0.00093689 Jy ! Total flux subtracted in 200 components = 0.00093689 Jy ! Clean residual min=-0.004031 max=0.003207 Jy/beam ! Clean residual mean=-0.000003 rms=0.000863 Jy/beam ! Combined flux in latest and established models = 1.10867 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 198 components and 1.10867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075605Jy sigma=0.000615 ! Fit after self-cal, rms=0.075514Jy sigma=0.000614 wmodel J0423-0120_X_2017_03_27_pus_map.mod ! Writing 198 model components to file: J0423-0120_X_2017_03_27_pus_map.mod wobs J0423-0120_X_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0423-0120_X_2017_03_27_pus_uvs.fits wwins J0423-0120_X_2017_03_27_pus_map.win ! wwins: Wrote 7 windows to J0423-0120_X_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000597091 Jy ! Component: 100 - total flux cleaned = -0.0003841 Jy ! Component: 150 - total flux cleaned = -8.15253e-05 Jy ! Component: 200 - total flux cleaned = 0.000110128 Jy ! Component: 250 - total flux cleaned = 0.000385077 Jy ! Component: 300 - total flux cleaned = 0.000560181 Jy ! Component: 350 - total flux cleaned = 0.00068898 Jy ! Component: 400 - total flux cleaned = 0.000813883 Jy ! Component: 450 - total flux cleaned = 0.000934981 Jy ! Component: 500 - total flux cleaned = 0.000933875 Jy ! Component: 550 - total flux cleaned = 0.000933726 Jy ! Component: 600 - total flux cleaned = 0.000971258 Jy ! Component: 650 - total flux cleaned = 0.00104317 Jy ! Component: 700 - total flux cleaned = 0.00111312 Jy ! Component: 750 - total flux cleaned = 0.00114795 Jy ! Component: 800 - total flux cleaned = 0.00128152 Jy ! Component: 850 - total flux cleaned = 0.00147657 Jy ! Component: 900 - total flux cleaned = 0.00160261 Jy ! Component: 950 - total flux cleaned = 0.00163347 Jy ! Component: 1000 - total flux cleaned = 0.00169529 Jy ! Component: 1050 - total flux cleaned = 0.00187547 Jy ! Component: 1100 - total flux cleaned = 0.00187518 Jy ! Component: 1150 - total flux cleaned = 0.00202032 Jy ! Component: 1200 - total flux cleaned = 0.00210613 Jy ! Component: 1250 - total flux cleaned = 0.00224651 Jy ! Component: 1300 - total flux cleaned = 0.00230187 Jy ! Component: 1350 - total flux cleaned = 0.00235577 Jy ! Component: 1400 - total flux cleaned = 0.00240972 Jy ! Component: 1450 - total flux cleaned = 0.00256793 Jy ! Component: 1500 - total flux cleaned = 0.00259375 Jy ! Component: 1550 - total flux cleaned = 0.00269618 Jy ! Component: 1600 - total flux cleaned = 0.00274693 Jy ! Component: 1650 - total flux cleaned = 0.00287179 Jy ! Component: 1700 - total flux cleaned = 0.00289602 Jy ! Component: 1750 - total flux cleaned = 0.00296856 Jy ! Component: 1800 - total flux cleaned = 0.00296885 Jy ! Component: 1850 - total flux cleaned = 0.00308631 Jy ! Component: 1900 - total flux cleaned = 0.00310913 Jy ! Component: 1950 - total flux cleaned = 0.00310901 Jy ! Component: 2000 - total flux cleaned = 0.00310914 Jy ! Total flux subtracted in 2048 components = 0.00313172 Jy ! Clean residual min=-0.001193 max=0.001330 Jy/beam ! Clean residual mean=0.000001 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 1.1118 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 351 components and 1.1118 Jy ![Exited script file: muppet] wmap "J0423-0120_X_2017_03_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8293 x 1.979 at 1.105 degrees (North through East) ! Clean map min=-0.0052292 max=0.73296 Jy/beam ! Writing clean map to FITS file: J0423-0120_X_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.732958 invert ! Inverting map ! Your choice of large map pixels excluded 0.187% of the data. ! The x-axis pixel size should ideally be below 0.1989 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000425485 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.174151 0.174151 0.348302 0.696604 1.39321 2.78642 5.57283 11.1457 22.2913 44.5827 89.1654 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.732 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8293 x 1.979 at 1.105 degrees (North through East) ! Clean map min=-0.0052292 max=0.73296 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0423-0120_X_2017_03_27_pus_uvs.log closed on Sat Apr 27 21:58:04 2019