! Started logfile: J0423-0120_S_2017_07_09_pus_uvs.log on Wed May 8 14:41:31 2019 obs J0423-0120_S_2017_07_09_pus_uva.fits ! Reading UV FITS file: J0423-0120_S_2017_07_09_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.724444 visibilities/baseline/integration-bin. ! Found source: J0423-0120 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0423-0120_S_2017_07_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.393340Jy sigma=0.003280 ! Fit after self-cal, rms=0.349341Jy sigma=0.002955 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.685 mas, bmaj=8.24 mas, bpa=-8.31 degrees ! Estimated noise=2899.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.919169 Jy ! Component: 100 - total flux cleaned = 1.17839 Jy ! Total flux subtracted in 100 components = 1.17839 Jy ! Clean residual min=-0.049103 max=0.108636 Jy/beam ! Clean residual mean=0.000018 rms=0.018564 Jy/beam ! Combined flux in latest and established models = 1.1784 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 1.1784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225414Jy sigma=0.001871 ! Fit after self-cal, rms=0.225302Jy sigma=0.001870 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=8.874 mas, bpa=-7.292 degrees ! Estimated noise=2558.4 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.146559 Jy ! Component: 100 - total flux cleaned = 0.215531 Jy ! Component: 150 - total flux cleaned = 0.249184 Jy ! Component: 200 - total flux cleaned = 0.266806 Jy ! Total flux subtracted in 200 components = 0.266806 Jy ! Clean residual min=-0.019256 max=0.021636 Jy/beam ! Clean residual mean=-0.000008 rms=0.005181 Jy/beam ! Combined flux in latest and established models = 1.4452 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 51 components and 1.4452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109306Jy sigma=0.000869 ! Fit after self-cal, rms=0.108751Jy sigma=0.000865 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.93 KP 1.01 ! LA 1.02 MK 1.01 NL 0.89 OV 1.01 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.00 KP 0.99 ! LA 0.98 MK 1.01 NL 0.98 OV 1.04 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.99 KP 1.00 ! LA 0.99 MK 1.03 NL 0.99 OV 0.98 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 0.96 KP 1.00* ! LA 1.00 MK 1.03 NL 1.00* OV 1.00* ! PT 1.03 SC 1.00* ! ! ! Fit before self-cal, rms=0.108751Jy sigma=0.000865 ! Fit after self-cal, rms=0.085937Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.196 mas, bmaj=8.885 mas, bpa=-7.364 degrees ! Estimated noise=2549.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -25.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173109 Jy ! Component: 100 - total flux cleaned = 0.0257375 Jy ! Component: 150 - total flux cleaned = 0.0272723 Jy ! Component: 200 - total flux cleaned = 0.0285644 Jy ! Total flux subtracted in 200 components = 0.0285644 Jy ! Clean residual min=-0.007680 max=0.007842 Jy/beam ! Clean residual mean=0.000003 rms=0.002064 Jy/beam ! Combined flux in latest and established models = 1.47377 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 1.47377 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081973Jy sigma=0.000662 ! Fit after self-cal, rms=0.081810Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081810Jy sigma=0.000661 ! Fit after self-cal, rms=0.081546Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.874 mas, bpa=-7.3 degrees ! Estimated noise=2546.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040607 Jy ! Component: 100 - total flux cleaned = 0.00406182 Jy ! Component: 150 - total flux cleaned = 0.00389761 Jy ! Component: 200 - total flux cleaned = 0.00390297 Jy ! Total flux subtracted in 200 components = 0.00390297 Jy ! Clean residual min=-0.006519 max=0.007434 Jy/beam ! Clean residual mean=0.000005 rms=0.001808 Jy/beam ! Combined flux in latest and established models = 1.47767 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 1.47767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080772Jy sigma=0.000655 ! Fit after self-cal, rms=0.080738Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000581802 Jy ! Component: 100 - total flux cleaned = 0.00070416 Jy ! Component: 150 - total flux cleaned = 0.000703937 Jy ! Component: 200 - total flux cleaned = 0.000806921 Jy ! Total flux subtracted in 200 components = 0.000806921 Jy ! Clean residual min=-0.006428 max=0.007192 Jy/beam ! Clean residual mean=0.000005 rms=0.001715 Jy/beam ! Combined flux in latest and established models = 1.47848 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 1.47848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080388Jy sigma=0.000652 ! Fit after self-cal, rms=0.080374Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080374Jy sigma=0.000652 ! Fit after self-cal, rms=0.080275Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.865 mas, bpa=-7.261 degrees ! Estimated noise=2544.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000671928 Jy ! Component: 100 - total flux cleaned = 0.00067504 Jy ! Component: 150 - total flux cleaned = 0.000674925 Jy ! Component: 200 - total flux cleaned = 0.000762298 Jy ! Total flux subtracted in 200 components = 0.000762298 Jy ! Clean residual min=-0.006238 max=0.007093 Jy/beam ! Clean residual mean=0.000006 rms=0.001637 Jy/beam ! Combined flux in latest and established models = 1.47924 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 1.47924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080025Jy sigma=0.000651 ! Fit after self-cal, rms=0.080016Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-62.5, 123.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00359241 Jy ! Component: 100 - total flux cleaned = 0.00323044 Jy ! Component: 150 - total flux cleaned = 0.00314713 Jy ! Component: 200 - total flux cleaned = 0.00305804 Jy ! Total flux subtracted in 200 components = 0.00305804 Jy ! Clean residual min=-0.005494 max=0.004774 Jy/beam ! Clean residual mean=0.000006 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 1.4823 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 1.4823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079331Jy sigma=0.000646 ! Fit after self-cal, rms=0.079332Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079332Jy sigma=0.000646 ! Fit after self-cal, rms=0.079261Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.173 mas, bmaj=14.97 mas, bpa=-4.56 degrees ! Estimated noise=3158.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108003 Jy ! Component: 100 - total flux cleaned = -0.00120991 Jy ! Component: 150 - total flux cleaned = -0.0012689 Jy ! Component: 200 - total flux cleaned = -0.00153784 Jy ! Total flux subtracted in 200 components = -0.00153784 Jy ! Clean residual min=-0.004184 max=0.003638 Jy/beam ! Clean residual mean=0.000009 rms=0.001200 Jy/beam ! Combined flux in latest and established models = 1.48076 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 136 components and 1.48076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079179Jy sigma=0.000645 ! Fit after self-cal, rms=0.079173Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000119177 Jy ! Component: 100 - total flux cleaned = -0.000316249 Jy ! Component: 150 - total flux cleaned = -0.000502114 Jy ! Component: 200 - total flux cleaned = -0.000544101 Jy ! Total flux subtracted in 200 components = -0.000544101 Jy ! Clean residual min=-0.004143 max=0.003406 Jy/beam ! Clean residual mean=0.000009 rms=0.001169 Jy/beam ! Combined flux in latest and established models = 1.48021 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 145 components and 1.48021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079115Jy sigma=0.000645 ! Fit after self-cal, rms=0.079112Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.197 mas, bmaj=8.86 mas, bpa=-7.24 degrees ! Estimated noise=2543.24 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.197 x 8.86 at -7.24 degrees (North through East) ! Clean map min=-0.0047963 max=1.2134 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079112Jy sigma=0.000645 ! Fit after self-cal, rms=0.072246Jy sigma=0.000587 ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.854 mas, bpa=-7.21 degrees ! Estimated noise=2543.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178618 Jy ! Component: 100 - total flux cleaned = 0.0021763 Jy ! Component: 150 - total flux cleaned = 0.0023863 Jy ! Component: 200 - total flux cleaned = 0.00258655 Jy ! Total flux subtracted in 200 components = 0.00258655 Jy ! Clean residual min=-0.004796 max=0.004261 Jy/beam ! Clean residual mean=0.000006 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 1.4828 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 156 components and 1.4828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072087Jy sigma=0.000586 ! Fit after self-cal, rms=0.072085Jy sigma=0.000586 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00034513 Jy ! Component: 100 - total flux cleaned = 0.000469257 Jy ! Component: 150 - total flux cleaned = 0.000524497 Jy ! Component: 200 - total flux cleaned = 0.000579775 Jy ! Total flux subtracted in 200 components = 0.000579775 Jy ! Clean residual min=-0.004670 max=0.004135 Jy/beam ! Clean residual mean=0.000005 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 1.48338 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 162 components and 1.48338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071984Jy sigma=0.000586 ! Fit after self-cal, rms=0.071984Jy sigma=0.000586 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071984Jy sigma=0.000586 ! Fit after self-cal, rms=0.071950Jy sigma=0.000585 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.701 mas, bmaj=8.194 mas, bpa=-8.22 degrees ! Estimated noise=2886.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.915127 Jy ! Component: 100 - total flux cleaned = 1.16828 Jy ! Component: 150 - total flux cleaned = 1.29149 Jy ! Component: 200 - total flux cleaned = 1.35951 Jy ! Total flux subtracted in 200 components = 1.35951 Jy ! Clean residual min=-0.019713 max=0.033032 Jy/beam ! Clean residual mean=0.000009 rms=0.006211 Jy/beam ! Combined flux in latest and established models = 1.35951 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 1.35951 Jy ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.85 mas, bpa=-7.196 degrees ! Estimated noise=2542.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443825 Jy ! Component: 100 - total flux cleaned = 0.0670622 Jy ! Component: 150 - total flux cleaned = 0.0816542 Jy ! Component: 200 - total flux cleaned = 0.0907776 Jy ! Total flux subtracted in 200 components = 0.0907776 Jy ! Clean residual min=-0.007783 max=0.007958 Jy/beam ! Clean residual mean=-0.000001 rms=0.002254 Jy/beam ! Combined flux in latest and established models = 1.45029 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 66 components and 1.45029 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.171 mas, bmaj=14.96 mas, bpa=-4.502 degrees ! Estimated noise=3157.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106893 Jy ! Component: 100 - total flux cleaned = 0.0151485 Jy ! Component: 150 - total flux cleaned = 0.0187215 Jy ! Component: 200 - total flux cleaned = 0.0215811 Jy ! Total flux subtracted in 200 components = 0.0215811 Jy ! Clean residual min=-0.004463 max=0.004263 Jy/beam ! Clean residual mean=0.000006 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 1.47187 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231167 Jy ! Component: 100 - total flux cleaned = 0.00399457 Jy ! Component: 150 - total flux cleaned = 0.00541233 Jy ! Component: 200 - total flux cleaned = 0.00634733 Jy ! Total flux subtracted in 200 components = 0.00634733 Jy ! Clean residual min=-0.004219 max=0.003897 Jy/beam ! Clean residual mean=0.000008 rms=0.001204 Jy/beam ! Combined flux in latest and established models = 1.47822 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 110 components and 1.47822 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.199 mas, bmaj=8.85 mas, bpa=-7.196 degrees ! Estimated noise=2542.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295987 Jy ! Component: 100 - total flux cleaned = 0.0047887 Jy ! Component: 150 - total flux cleaned = 0.00607279 Jy ! Component: 200 - total flux cleaned = 0.0065839 Jy ! Total flux subtracted in 200 components = 0.0065839 Jy ! Clean residual min=-0.005244 max=0.005420 Jy/beam ! Clean residual mean=0.000005 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 1.4848 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 1.4848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072708Jy sigma=0.000591 ! Fit after self-cal, rms=0.072637Jy sigma=0.000591 wmodel J0423-0120_S_2017_07_09_pus_map.mod ! Writing 130 model components to file: J0423-0120_S_2017_07_09_pus_map.mod wobs J0423-0120_S_2017_07_09_pus_uvs.fits ! Writing UV FITS file: J0423-0120_S_2017_07_09_pus_uvs.fits wwins J0423-0120_S_2017_07_09_pus_map.win ! wwins: Wrote 3 windows to J0423-0120_S_2017_07_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190094 Jy ! Component: 100 - total flux cleaned = 0.00235749 Jy ! Component: 150 - total flux cleaned = 0.00269725 Jy ! Component: 200 - total flux cleaned = 0.00285981 Jy ! Component: 250 - total flux cleaned = 0.0030912 Jy ! Component: 300 - total flux cleaned = 0.00316436 Jy ! Component: 350 - total flux cleaned = 0.00344551 Jy ! Component: 400 - total flux cleaned = 0.0034457 Jy ! Component: 450 - total flux cleaned = 0.00357982 Jy ! Component: 500 - total flux cleaned = 0.00358138 Jy ! Component: 550 - total flux cleaned = 0.00352211 Jy ! Component: 600 - total flux cleaned = 0.00334298 Jy ! Component: 650 - total flux cleaned = 0.00322653 Jy ! Component: 700 - total flux cleaned = 0.00311165 Jy ! Component: 750 - total flux cleaned = 0.00272685 Jy ! Component: 800 - total flux cleaned = 0.0025141 Jy ! Component: 850 - total flux cleaned = 0.00246255 Jy ! Component: 900 - total flux cleaned = 0.00240974 Jy ! Component: 950 - total flux cleaned = 0.00220908 Jy ! Component: 1000 - total flux cleaned = 0.00220853 Jy ! Component: 1050 - total flux cleaned = 0.00216011 Jy ! Component: 1100 - total flux cleaned = 0.00202014 Jy ! Component: 1150 - total flux cleaned = 0.00188342 Jy ! Component: 1200 - total flux cleaned = 0.00188255 Jy ! Component: 1250 - total flux cleaned = 0.0016191 Jy ! Component: 1300 - total flux cleaned = 0.00144791 Jy ! Component: 1350 - total flux cleaned = 0.00136399 Jy ! Component: 1400 - total flux cleaned = 0.00115715 Jy ! Component: 1450 - total flux cleaned = 0.00107579 Jy ! Component: 1500 - total flux cleaned = 0.000916443 Jy ! Component: 1550 - total flux cleaned = 0.000876584 Jy ! Component: 1600 - total flux cleaned = 0.000645967 Jy ! Component: 1650 - total flux cleaned = 0.000570038 Jy ! Component: 1700 - total flux cleaned = 0.000457578 Jy ! Component: 1750 - total flux cleaned = 0.00020161 Jy ! Component: 1800 - total flux cleaned = 9.41388e-05 Jy ! Component: 1850 - total flux cleaned = -4.67846e-05 Jy ! Component: 1900 - total flux cleaned = -4.61188e-05 Jy ! Component: 1950 - total flux cleaned = -7.98572e-05 Jy ! Component: 2000 - total flux cleaned = -0.000113158 Jy ! Component: 2050 - total flux cleaned = -8.00297e-05 Jy ! Component: 2100 - total flux cleaned = -0.000146093 Jy ! Component: 2150 - total flux cleaned = -0.000178226 Jy ! Component: 2200 - total flux cleaned = -0.000210023 Jy ! Component: 2250 - total flux cleaned = -0.000210606 Jy ! Component: 2300 - total flux cleaned = -0.000304358 Jy ! Component: 2350 - total flux cleaned = -0.000397175 Jy ! Component: 2400 - total flux cleaned = -0.000457969 Jy ! Component: 2450 - total flux cleaned = -0.000458006 Jy ! Component: 2500 - total flux cleaned = -0.000458017 Jy ! Component: 2550 - total flux cleaned = -0.000517409 Jy ! Component: 2600 - total flux cleaned = -0.000605365 Jy ! Component: 2650 - total flux cleaned = -0.000546771 Jy ! Component: 2700 - total flux cleaned = -0.000517919 Jy ! Component: 2750 - total flux cleaned = -0.000546852 Jy ! Component: 2800 - total flux cleaned = -0.000575466 Jy ! Component: 2850 - total flux cleaned = -0.000518735 Jy ! Component: 2900 - total flux cleaned = -0.000406088 Jy ! Component: 2950 - total flux cleaned = -0.000349866 Jy ! Component: 3000 - total flux cleaned = -0.000238216 Jy ! Component: 3050 - total flux cleaned = -0.000155154 Jy ! Component: 3100 - total flux cleaned = -0.000182848 Jy ! Component: 3150 - total flux cleaned = -4.4946e-05 Jy ! Component: 3200 - total flux cleaned = -9.99571e-05 Jy ! Component: 3250 - total flux cleaned = -4.51132e-05 Jy ! Component: 3300 - total flux cleaned = 9.6304e-06 Jy ! Component: 3350 - total flux cleaned = 9.15586e-05 Jy ! Component: 3400 - total flux cleaned = 0.00017339 Jy ! Component: 3450 - total flux cleaned = 0.000254877 Jy ! Component: 3500 - total flux cleaned = 0.000254879 Jy ! Component: 3550 - total flux cleaned = 0.000390842 Jy ! Component: 3600 - total flux cleaned = 0.000445148 Jy ! Component: 3650 - total flux cleaned = 0.000526646 Jy ! Component: 3700 - total flux cleaned = 0.00055382 Jy ! Component: 3750 - total flux cleaned = 0.000690139 Jy ! Component: 3800 - total flux cleaned = 0.00074503 Jy ! Component: 3850 - total flux cleaned = 0.000827093 Jy ! Component: 3900 - total flux cleaned = 0.000909337 Jy ! Component: 3950 - total flux cleaned = 0.000991708 Jy ! Component: 4000 - total flux cleaned = 0.00101911 Jy ! Component: 4050 - total flux cleaned = 0.00110208 Jy ! Total flux subtracted in 4096 components = 0.00112975 Jy ! Clean residual min=-0.001626 max=0.001535 Jy/beam ! Clean residual mean=0.000005 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 1.48593 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 377 components and 1.48593 Jy ![Exited script file: muppet] wmap "J0423-0120_S_2017_07_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.199 x 8.85 at -7.196 degrees (North through East) ! Clean map min=-0.0046938 max=1.2093 Jy/beam ! Writing clean map to FITS file: J0423-0120_S_2017_07_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.20926 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000466504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.115733 0.115733 0.231466 0.462931 0.925863 1.85173 3.70345 7.4069 14.8138 29.6276 59.2552 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.209 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.199 x 8.85 at -7.196 degrees (North through East) ! Clean map min=-0.0046938 max=1.2093 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0423-0120_S_2017_07_09_pus_uvs.log closed on Wed May 8 14:41:36 2019