! Started logfile: J0422-2034_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:23 2019 obs J0422-2034_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0422-2034_S_2017_04_28_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974269 visibilities/baseline/integration-bin. ! Found source: J0422-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 16660 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0422-2034_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 479 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.902802Jy sigma=0.022870 ! Fit after self-cal, rms=0.894345Jy sigma=0.022799 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.709 mas, bmaj=6.819 mas, bpa=-3.773 degrees ! Estimated noise=1005.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0520226 Jy ! Component: 100 - total flux cleaned = 0.074723 Jy ! Total flux subtracted in 100 components = 0.074723 Jy ! Clean residual min=-0.020627 max=0.022478 Jy/beam ! Clean residual mean=-0.000008 rms=0.005827 Jy/beam ! Combined flux in latest and established models = 0.074723 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.074723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160822Jy sigma=0.001245 ! Fit after self-cal, rms=0.160808Jy sigma=0.001217 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.296 mas, bmaj=7.913 mas, bpa=-0.816 degrees ! Estimated noise=720.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268616 Jy ! Component: 100 - total flux cleaned = 0.0430166 Jy ! Component: 150 - total flux cleaned = 0.0531201 Jy ! Component: 200 - total flux cleaned = 0.0595923 Jy ! Total flux subtracted in 200 components = 0.0595923 Jy ! Clean residual min=-0.018471 max=0.018868 Jy/beam ! Clean residual mean=0.000004 rms=0.005593 Jy/beam ! Combined flux in latest and established models = 0.134315 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 22 components and 0.134315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151854Jy sigma=0.001382 ! Fit after self-cal, rms=0.151625Jy sigma=0.001382 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.84 HN 1.03 KP 0.86 ! LA 0.91 MK 1.26 NL 0.86 OV 0.94 ! PT 0.99 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.74 HN 1.02 KP 0.85 ! LA 0.92 MK 1.21 NL 1.05 OV 0.94 ! PT 0.98 SC 1.16 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.67 FD 0.77 HN 1.02 KP 0.91 ! LA 0.89 MK 1.25 NL 0.94 OV 0.81 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 9.06 FD 1.11 HN 0.96 KP 1.00* ! LA 1.43 MK 1.17 NL 1.00* OV 1.00* ! PT 1.30 SC 1.00* ! ! ! Fit before self-cal, rms=0.151625Jy sigma=0.001382 ! Fit after self-cal, rms=0.173001Jy sigma=0.000711 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=8.249 mas, bpa=-0.5778 degrees ! Estimated noise=871.593 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00432482 Jy ! Component: 100 - total flux cleaned = -0.00502485 Jy ! Component: 150 - total flux cleaned = -0.00531737 Jy ! Component: 200 - total flux cleaned = -0.00556763 Jy ! Total flux subtracted in 200 components = -0.00556763 Jy ! Clean residual min=-0.005656 max=0.004974 Jy/beam ! Clean residual mean=-0.000005 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 0.128748 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 30 components and 0.128748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171836Jy sigma=0.000699 ! Fit after self-cal, rms=0.170097Jy sigma=0.000696 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170097Jy sigma=0.000696 ! Fit after self-cal, rms=0.126082Jy sigma=0.000688 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.284 mas, bmaj=8.194 mas, bpa=-1.783 degrees ! Estimated noise=844.207 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430183 Jy ! Component: 100 - total flux cleaned = -0.000599374 Jy ! Component: 150 - total flux cleaned = -0.000598798 Jy ! Component: 200 - total flux cleaned = -0.000846616 Jy ! Total flux subtracted in 200 components = -0.000846616 Jy ! Clean residual min=-0.004112 max=0.004120 Jy/beam ! Clean residual mean=-0.000005 rms=0.000888 Jy/beam ! Combined flux in latest and established models = 0.127901 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 32 components and 0.127901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125655Jy sigma=0.000685 ! Fit after self-cal, rms=0.125142Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311692 Jy ! Component: 100 - total flux cleaned = 0.00312138 Jy ! Component: 150 - total flux cleaned = 0.00300663 Jy ! Component: 200 - total flux cleaned = 0.00290484 Jy ! Total flux subtracted in 200 components = 0.00290484 Jy ! Clean residual min=-0.003728 max=0.003172 Jy/beam ! Clean residual mean=-0.000006 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.130806 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 45 components and 0.130806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124834Jy sigma=0.000682 ! Fit after self-cal, rms=0.124820Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124820Jy sigma=0.000682 ! Fit after self-cal, rms=0.111786Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.219 mas, bmaj=8.083 mas, bpa=-2.054 degrees ! Estimated noise=832.797 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.57125e-05 Jy ! Component: 100 - total flux cleaned = -3.01182e-05 Jy ! Component: 150 - total flux cleaned = 0.000174013 Jy ! Component: 200 - total flux cleaned = 0.000352128 Jy ! Total flux subtracted in 200 components = 0.000352128 Jy ! Clean residual min=-0.003195 max=0.002675 Jy/beam ! Clean residual mean=-0.000006 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.131158 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 51 components and 0.131158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111552Jy sigma=0.000678 ! Fit after self-cal, rms=0.111178Jy sigma=0.000678 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767276 Jy ! Component: 100 - total flux cleaned = 0.000767259 Jy ! Component: 150 - total flux cleaned = 0.000767584 Jy ! Component: 200 - total flux cleaned = 0.00076887 Jy ! Total flux subtracted in 200 components = 0.00076887 Jy ! Clean residual min=-0.003006 max=0.002487 Jy/beam ! Clean residual mean=-0.000008 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.131927 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.131927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111064Jy sigma=0.000677 ! Fit after self-cal, rms=0.111061Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111061Jy sigma=0.000677 ! Fit after self-cal, rms=0.107882Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=16.24 mas, bpa=4.908 degrees ! Estimated noise=1034.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000834673 Jy ! Component: 100 - total flux cleaned = 0.0010495 Jy ! Component: 150 - total flux cleaned = 0.0011591 Jy ! Component: 200 - total flux cleaned = 0.00119074 Jy ! Total flux subtracted in 200 components = 0.00119074 Jy ! Clean residual min=-0.002414 max=0.002380 Jy/beam ! Clean residual mean=-0.000013 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.133118 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.133118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107838Jy sigma=0.000677 ! Fit after self-cal, rms=0.107681Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461256 Jy ! Component: 100 - total flux cleaned = 0.000630582 Jy ! Component: 150 - total flux cleaned = 0.000680649 Jy ! Component: 200 - total flux cleaned = 0.000680247 Jy ! Total flux subtracted in 200 components = 0.000680247 Jy ! Clean residual min=-0.002342 max=0.002541 Jy/beam ! Clean residual mean=-0.000015 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.133798 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 70 components and 0.133798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107666Jy sigma=0.000676 ! Fit after self-cal, rms=0.107667Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.021 mas, bpa=-2.184 degrees ! Estimated noise=825.973 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 8.021 at -2.184 degrees (North through East) ! Clean map min=-0.0026024 max=0.087315 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.535 mas, bmaj=6.767 mas, bpa=-3.105 degrees ! Estimated noise=1268.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0665832 Jy ! Component: 100 - total flux cleaned = 0.0922008 Jy ! Component: 150 - total flux cleaned = 0.105919 Jy ! Component: 200 - total flux cleaned = 0.114175 Jy ! Total flux subtracted in 200 components = 0.114175 Jy ! Clean residual min=-0.004651 max=0.004584 Jy/beam ! Clean residual mean=-0.000006 rms=0.001083 Jy/beam ! Combined flux in latest and established models = 0.114175 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.114175 Jy ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.021 mas, bpa=-2.184 degrees ! Estimated noise=825.973 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0065268 Jy ! Component: 100 - total flux cleaned = 0.0106258 Jy ! Component: 150 - total flux cleaned = 0.0135278 Jy ! Component: 200 - total flux cleaned = 0.0156374 Jy ! Total flux subtracted in 200 components = 0.0156374 Jy ! Clean residual min=-0.002787 max=0.002131 Jy/beam ! Clean residual mean=-0.000009 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.129813 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.129813 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.464 mas, bmaj=16.24 mas, bpa=4.908 degrees ! Estimated noise=1034.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018616 Jy ! Component: 100 - total flux cleaned = 0.00291868 Jy ! Component: 150 - total flux cleaned = 0.00329039 Jy ! Component: 200 - total flux cleaned = 0.00345702 Jy ! Total flux subtracted in 200 components = 0.00345702 Jy ! Clean residual min=-0.002305 max=0.002626 Jy/beam ! Clean residual mean=-0.000015 rms=0.000686 Jy/beam ! Combined flux in latest and established models = 0.13327 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.76852e-05 Jy ! Component: 100 - total flux cleaned = 0.000170014 Jy ! Component: 150 - total flux cleaned = 0.000246977 Jy ! Component: 200 - total flux cleaned = 0.000265208 Jy ! Total flux subtracted in 200 components = 0.000265208 Jy ! Clean residual min=-0.002249 max=0.002625 Jy/beam ! Clean residual mean=-0.000015 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.133535 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 0.133535 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.18 mas, bmaj=8.021 mas, bpa=-2.184 degrees ! Estimated noise=825.973 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000668501 Jy ! Component: 100 - total flux cleaned = -0.000667062 Jy ! Component: 150 - total flux cleaned = -0.000669687 Jy ! Component: 200 - total flux cleaned = -0.000634276 Jy ! Total flux subtracted in 200 components = -0.000634276 Jy ! Clean residual min=-0.002677 max=0.002087 Jy/beam ! Clean residual mean=-0.000008 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.132901 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 64 components and 0.132901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107508Jy sigma=0.000676 ! Fit after self-cal, rms=0.107473Jy sigma=0.000675 wmodel J0422-2034_S_2017_04_28_pus_map.mod ! Writing 64 model components to file: J0422-2034_S_2017_04_28_pus_map.mod wobs J0422-2034_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0422-2034_S_2017_04_28_pus_uvs.fits wwins J0422-2034_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0422-2034_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116557 Jy ! Component: 100 - total flux cleaned = -0.00172812 Jy ! Component: 150 - total flux cleaned = -0.00209993 Jy ! Component: 200 - total flux cleaned = -0.00245468 Jy ! Component: 250 - total flux cleaned = -0.00286284 Jy ! Component: 300 - total flux cleaned = -0.00319196 Jy ! Component: 350 - total flux cleaned = -0.00344589 Jy ! Component: 400 - total flux cleaned = -0.00375472 Jy ! Component: 450 - total flux cleaned = -0.00399555 Jy ! Component: 500 - total flux cleaned = -0.00417194 Jy ! Component: 550 - total flux cleaned = -0.00437367 Jy ! Component: 600 - total flux cleaned = -0.00457072 Jy ! Component: 650 - total flux cleaned = -0.00476349 Jy ! Component: 700 - total flux cleaned = -0.00492573 Jy ! Component: 750 - total flux cleaned = -0.00508533 Jy ! Component: 800 - total flux cleaned = -0.00519046 Jy ! Component: 850 - total flux cleaned = -0.00529348 Jy ! Component: 900 - total flux cleaned = -0.0053946 Jy ! Component: 950 - total flux cleaned = -0.00544409 Jy ! Component: 1000 - total flux cleaned = -0.00544443 Jy ! Component: 1050 - total flux cleaned = -0.00561413 Jy ! Component: 1100 - total flux cleaned = -0.00559048 Jy ! Component: 1150 - total flux cleaned = -0.00566117 Jy ! Component: 1200 - total flux cleaned = -0.00561494 Jy ! Component: 1250 - total flux cleaned = -0.00570717 Jy ! Component: 1300 - total flux cleaned = -0.00573012 Jy ! Component: 1350 - total flux cleaned = -0.00575263 Jy ! Component: 1400 - total flux cleaned = -0.00579662 Jy ! Component: 1450 - total flux cleaned = -0.00588394 Jy ! Component: 1500 - total flux cleaned = -0.00594837 Jy ! Component: 1550 - total flux cleaned = -0.00601166 Jy ! Component: 1600 - total flux cleaned = -0.00605332 Jy ! Component: 1650 - total flux cleaned = -0.00609501 Jy ! Component: 1700 - total flux cleaned = -0.006095 Jy ! Component: 1750 - total flux cleaned = -0.00615588 Jy ! Component: 1800 - total flux cleaned = -0.00617577 Jy ! Component: 1850 - total flux cleaned = -0.006215 Jy ! Component: 1900 - total flux cleaned = -0.0061955 Jy ! Component: 1950 - total flux cleaned = -0.00623408 Jy ! Component: 2000 - total flux cleaned = -0.00621548 Jy ! Component: 2050 - total flux cleaned = -0.00629134 Jy ! Component: 2100 - total flux cleaned = -0.00627272 Jy ! Component: 2150 - total flux cleaned = -0.00638422 Jy ! Component: 2200 - total flux cleaned = -0.0063107 Jy ! Component: 2250 - total flux cleaned = -0.00632925 Jy ! Component: 2300 - total flux cleaned = -0.00636526 Jy ! Component: 2350 - total flux cleaned = -0.00632955 Jy ! Component: 2400 - total flux cleaned = -0.00629446 Jy ! Component: 2450 - total flux cleaned = -0.00627696 Jy ! Component: 2500 - total flux cleaned = -0.00625932 Jy ! Component: 2550 - total flux cleaned = -0.00625925 Jy ! Component: 2600 - total flux cleaned = -0.00617413 Jy ! Component: 2650 - total flux cleaned = -0.006174 Jy ! Component: 2700 - total flux cleaned = -0.00614044 Jy ! Component: 2750 - total flux cleaned = -0.00614079 Jy ! Component: 2800 - total flux cleaned = -0.00607499 Jy ! Component: 2850 - total flux cleaned = -0.0060586 Jy ! Component: 2900 - total flux cleaned = -0.00609089 Jy ! Component: 2950 - total flux cleaned = -0.00597881 Jy ! Component: 3000 - total flux cleaned = -0.00599467 Jy ! Component: 3050 - total flux cleaned = -0.0059474 Jy ! Component: 3100 - total flux cleaned = -0.00591601 Jy ! Component: 3150 - total flux cleaned = -0.0058849 Jy ! Component: 3200 - total flux cleaned = -0.0058541 Jy ! Component: 3250 - total flux cleaned = -0.00577769 Jy ! Component: 3300 - total flux cleaned = -0.0057931 Jy ! Component: 3350 - total flux cleaned = -0.0057931 Jy ! Component: 3400 - total flux cleaned = -0.00579293 Jy ! Component: 3450 - total flux cleaned = -0.00573373 Jy ! Component: 3500 - total flux cleaned = -0.00573373 Jy ! Component: 3550 - total flux cleaned = -0.00573378 Jy ! Component: 3600 - total flux cleaned = -0.0057339 Jy ! Component: 3650 - total flux cleaned = -0.0057195 Jy ! Component: 3700 - total flux cleaned = -0.00573403 Jy ! Component: 3750 - total flux cleaned = -0.00571982 Jy ! Component: 3800 - total flux cleaned = -0.00573398 Jy ! Component: 3850 - total flux cleaned = -0.00571997 Jy ! Component: 3900 - total flux cleaned = -0.00571994 Jy ! Component: 3950 - total flux cleaned = -0.00574768 Jy ! Component: 4000 - total flux cleaned = -0.00576144 Jy ! Component: 4050 - total flux cleaned = -0.00570675 Jy ! Total flux subtracted in 4096 components = -0.0057068 Jy ! Clean residual min=-0.000789 max=0.000843 Jy/beam ! Clean residual mean=-0.000003 rms=0.000243 Jy/beam ! Combined flux in latest and established models = 0.127194 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 347 components and 0.127194 Jy ![Exited script file: muppet] wmap "J0422-2034_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 8.021 at -2.184 degrees (North through East) ! Clean map min=-0.0018567 max=0.089764 Jy/beam ! Writing clean map to FITS file: J0422-2034_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0897645 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000237998 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.795408 0.795408 1.59082 3.18163 6.36326 12.7265 25.453 50.9061 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.089 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.18 x 8.021 at -2.184 degrees (North through East) ! Clean map min=-0.0018567 max=0.089764 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0422-2034_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:28 2019