! Started logfile: J0419-2132_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:18 2019 obs J0419-2132_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0419-2132_S_2017_04_28_pus_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.977005 visibilities/baseline/integration-bin. ! Found source: J0419-2132 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 20224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0419-2132_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894695Jy sigma=0.408721 ! Fit after self-cal, rms=0.883993Jy sigma=0.408717 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.29 mas, bmaj=9.839 mas, bpa=-8.89 degrees ! Estimated noise=296.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141544 Jy ! Component: 100 - total flux cleaned = 0.0125719 Jy ! Total flux subtracted in 100 components = 0.0125719 Jy ! Clean residual min=-0.014052 max=0.015002 Jy/beam ! Clean residual mean=-0.000031 rms=0.006287 Jy/beam ! Combined flux in latest and established models = 0.0125719 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0125719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.173982Jy sigma=0.005773 ! Fit after self-cal, rms=0.173971Jy sigma=0.005753 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.431 mas, bmaj=11.66 mas, bpa=-5.307 degrees ! Estimated noise=177.667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736782 Jy ! Component: 100 - total flux cleaned = 0.00277414 Jy ! Component: 150 - total flux cleaned = 0.00463486 Jy ! Component: 200 - total flux cleaned = 0.00632492 Jy ! Total flux subtracted in 200 components = 0.00632492 Jy ! Clean residual min=-0.013703 max=0.013766 Jy/beam ! Clean residual mean=-0.000042 rms=0.006284 Jy/beam ! Combined flux in latest and established models = 0.0188968 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 0.0188968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168706Jy sigma=0.005655 ! Fit after self-cal, rms=0.168637Jy sigma=0.005648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.27 FD 0.32 HN 1.02 KP 0.39 ! LA 0.41 MK 0.95 NL 0.62 OV 0.42 ! PT 0.42 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.28 FD 0.30 HN 0.97 KP 0.37 ! LA 0.38 MK 0.98 NL 0.74 OV 0.41 ! PT 0.41 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.29 FD 0.32 HN 1.00 KP 0.39 ! LA 0.38 MK 0.99 NL 0.66 OV 0.37 ! PT 0.40 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 10.79 FD 0.44 HN 1.67 KP 1.00* ! LA 13.91 MK 0.89 NL 1.00* OV 1.00* ! PT 0.73 SC 1.00* ! ! ! Fit before self-cal, rms=0.168637Jy sigma=0.005648 ! Fit after self-cal, rms=2.487388Jy sigma=0.000718 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.12 mas, bmaj=9.655 mas, bpa=-0.7977 degrees ! Estimated noise=227.432 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029562 Jy ! Component: 100 - total flux cleaned = 0.00280537 Jy ! Component: 150 - total flux cleaned = 0.00266562 Jy ! Component: 200 - total flux cleaned = 0.00247196 Jy ! Total flux subtracted in 200 components = 0.00247196 Jy ! Clean residual min=-0.001812 max=0.002115 Jy/beam ! Clean residual mean=-0.000006 rms=0.000467 Jy/beam ! Combined flux in latest and established models = 0.0213688 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 27 components and 0.0213688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.487235Jy sigma=0.000715 ! Fit after self-cal, rms=2.487468Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.487468Jy sigma=0.000702 ! Fit after self-cal, rms=4.007993Jy sigma=0.000695 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.979 mas, bmaj=9.455 mas, bpa=-1.725 degrees ! Estimated noise=236.067 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263494 Jy ! Component: 100 - total flux cleaned = 0.00276162 Jy ! Component: 150 - total flux cleaned = 0.00265908 Jy ! Component: 200 - total flux cleaned = 0.00251216 Jy ! Total flux subtracted in 200 components = 0.00251216 Jy ! Clean residual min=-0.001450 max=0.001667 Jy/beam ! Clean residual mean=-0.000005 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.023881 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.023881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.007918Jy sigma=0.000693 ! Fit after self-cal, rms=4.007933Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2, 73.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010039 Jy ! Component: 100 - total flux cleaned = 0.00120869 Jy ! Component: 150 - total flux cleaned = 0.00116167 Jy ! Component: 200 - total flux cleaned = 0.00116236 Jy ! Total flux subtracted in 200 components = 0.00116236 Jy ! Clean residual min=-0.001389 max=0.001584 Jy/beam ! Clean residual mean=-0.000006 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0250433 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 49 components and 0.0250433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.007893Jy sigma=0.000691 ! Fit after self-cal, rms=4.007888Jy sigma=0.000691 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.007888Jy sigma=0.000691 ! Fit after self-cal, rms=0.158479Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.797 mas, bmaj=9.207 mas, bpa=-2.358 degrees ! Estimated noise=245.862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209508 Jy ! Component: 100 - total flux cleaned = 0.00204785 Jy ! Component: 150 - total flux cleaned = 0.00189706 Jy ! Component: 200 - total flux cleaned = 0.00182681 Jy ! Total flux subtracted in 200 components = 0.00182681 Jy ! Clean residual min=-0.001307 max=0.001333 Jy/beam ! Clean residual mean=-0.000001 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0268701 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 63 components and 0.0268701 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158387Jy sigma=0.000683 ! Fit after self-cal, rms=0.158317Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.4773e-05 Jy ! Component: 100 - total flux cleaned = 4.72966e-05 Jy ! Component: 150 - total flux cleaned = 1.48869e-05 Jy ! Component: 200 - total flux cleaned = -4.79104e-05 Jy ! Total flux subtracted in 200 components = -4.79104e-05 Jy ! Clean residual min=-0.001264 max=0.001332 Jy/beam ! Clean residual mean=-0.000002 rms=0.000320 Jy/beam ! Combined flux in latest and established models = 0.0268222 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.0268222 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158277Jy sigma=0.000682 ! Fit after self-cal, rms=0.158276Jy sigma=0.000682 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158276Jy sigma=0.000682 ! Fit after self-cal, rms=0.167331Jy sigma=0.000680 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.443 mas, bmaj=18.54 mas, bpa=5.595 degrees ! Estimated noise=265.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147508 Jy ! Component: 100 - total flux cleaned = 0.00144408 Jy ! Component: 150 - total flux cleaned = 0.00133614 Jy ! Component: 200 - total flux cleaned = 0.00124262 Jy ! Total flux subtracted in 200 components = 0.00124262 Jy ! Clean residual min=-0.000997 max=0.001036 Jy/beam ! Clean residual mean=-0.000003 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.0280649 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 85 components and 0.0280648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167269Jy sigma=0.000679 ! Fit after self-cal, rms=0.167237Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00014029 Jy ! Component: 100 - total flux cleaned = -0.00020679 Jy ! Component: 150 - total flux cleaned = -0.000242862 Jy ! Component: 200 - total flux cleaned = -0.00027669 Jy ! Total flux subtracted in 200 components = -0.00027669 Jy ! Clean residual min=-0.000960 max=0.001056 Jy/beam ! Clean residual mean=-0.000003 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.0277882 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.0277882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167215Jy sigma=0.000679 ! Fit after self-cal, rms=0.167217Jy sigma=0.000679 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=9.01 mas, bpa=-2.644 degrees ! Estimated noise=253.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 9.01 at -2.644 degrees (North through East) ! Clean map min=-0.0034187 max=0.033282 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=7.448 mas, bpa=-3.518 degrees ! Estimated noise=419.511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289275 Jy ! Component: 100 - total flux cleaned = 0.0299551 Jy ! Component: 150 - total flux cleaned = 0.0288055 Jy ! Component: 200 - total flux cleaned = 0.0281561 Jy ! Total flux subtracted in 200 components = 0.0281561 Jy ! Clean residual min=-0.002371 max=0.002597 Jy/beam ! Clean residual mean=0.000002 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.0281561 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0281561 Jy ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=9.01 mas, bpa=-2.644 degrees ! Estimated noise=253.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (32.5, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156172 Jy ! Component: 100 - total flux cleaned = -8.15885e-05 Jy ! Component: 150 - total flux cleaned = -2.36119e-05 Jy ! Component: 200 - total flux cleaned = -7.49827e-05 Jy ! Total flux subtracted in 200 components = -7.49827e-05 Jy ! Clean residual min=-0.001268 max=0.001468 Jy/beam ! Clean residual mean=0.000000 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0280812 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 28 components and 0.0280812 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.443 mas, bmaj=18.54 mas, bpa=5.595 degrees ! Estimated noise=265.068 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000618813 Jy ! Component: 100 - total flux cleaned = -0.000813766 Jy ! Component: 150 - total flux cleaned = -0.000947861 Jy ! Component: 200 - total flux cleaned = -0.00104351 Jy ! Total flux subtracted in 200 components = -0.00104351 Jy ! Clean residual min=-0.001091 max=0.001127 Jy/beam ! Clean residual mean=-0.000003 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.0270376 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.65337e-05 Jy ! Component: 100 - total flux cleaned = -0.000126615 Jy ! Component: 150 - total flux cleaned = -0.000200846 Jy ! Component: 200 - total flux cleaned = -0.000235982 Jy ! Total flux subtracted in 200 components = -0.000235982 Jy ! Clean residual min=-0.001039 max=0.001069 Jy/beam ! Clean residual mean=-0.000003 rms=0.000307 Jy/beam ! Combined flux in latest and established models = 0.0268017 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 57 components and 0.0268017 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.66 mas, bmaj=9.01 mas, bpa=-2.644 degrees ! Estimated noise=253.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000174044 Jy ! Component: 100 - total flux cleaned = 9.36252e-05 Jy ! Component: 150 - total flux cleaned = 2.05414e-05 Jy ! Component: 200 - total flux cleaned = -1.4025e-05 Jy ! Total flux subtracted in 200 components = -1.4025e-05 Jy ! Clean residual min=-0.001069 max=0.001246 Jy/beam ! Clean residual mean=-0.000001 rms=0.000296 Jy/beam ! Combined flux in latest and established models = 0.0267876 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 73 components and 0.0267876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167125Jy sigma=0.000679 ! Fit after self-cal, rms=0.167122Jy sigma=0.000679 wmodel J0419-2132_S_2017_04_28_pus_map.mod ! Writing 73 model components to file: J0419-2132_S_2017_04_28_pus_map.mod wobs J0419-2132_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0419-2132_S_2017_04_28_pus_uvs.fits wwins J0419-2132_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0419-2132_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523632 Jy ! Component: 100 - total flux cleaned = 0.000871107 Jy ! Component: 150 - total flux cleaned = 0.00114681 Jy ! Component: 200 - total flux cleaned = 0.00141217 Jy ! Component: 250 - total flux cleaned = 0.00163482 Jy ! Component: 300 - total flux cleaned = 0.00186665 Jy ! Component: 350 - total flux cleaned = 0.00209158 Jy ! Component: 400 - total flux cleaned = 0.00224838 Jy ! Component: 450 - total flux cleaned = 0.00241689 Jy ! Component: 500 - total flux cleaned = 0.00252216 Jy ! Component: 550 - total flux cleaned = 0.00266993 Jy ! Component: 600 - total flux cleaned = 0.00284423 Jy ! Component: 650 - total flux cleaned = 0.00300119 Jy ! Component: 700 - total flux cleaned = 0.00314158 Jy ! Component: 750 - total flux cleaned = 0.00323856 Jy ! Component: 800 - total flux cleaned = 0.00340258 Jy ! Component: 850 - total flux cleaned = 0.0034969 Jy ! Component: 900 - total flux cleaned = 0.00359015 Jy ! Component: 950 - total flux cleaned = 0.00364261 Jy ! Component: 1000 - total flux cleaned = 0.00374633 Jy ! Component: 1050 - total flux cleaned = 0.00379764 Jy ! Component: 1100 - total flux cleaned = 0.00386127 Jy ! Component: 1150 - total flux cleaned = 0.00398688 Jy ! Component: 1200 - total flux cleaned = 0.00407389 Jy ! Component: 1250 - total flux cleaned = 0.00416004 Jy ! Component: 1300 - total flux cleaned = 0.00426974 Jy ! Component: 1350 - total flux cleaned = 0.00431819 Jy ! Component: 1400 - total flux cleaned = 0.004426 Jy ! Component: 1450 - total flux cleaned = 0.00448539 Jy ! Component: 1500 - total flux cleaned = 0.00460306 Jy ! Component: 1550 - total flux cleaned = 0.00469626 Jy ! Component: 1600 - total flux cleaned = 0.00477717 Jy ! Component: 1650 - total flux cleaned = 0.00485739 Jy ! Component: 1700 - total flux cleaned = 0.00492552 Jy ! Component: 1750 - total flux cleaned = 0.00502685 Jy ! Component: 1800 - total flux cleaned = 0.00510486 Jy ! Component: 1850 - total flux cleaned = 0.00518238 Jy ! Component: 1900 - total flux cleaned = 0.00527024 Jy ! Component: 1950 - total flux cleaned = 0.00533559 Jy ! Component: 2000 - total flux cleaned = 0.00543295 Jy ! Component: 2050 - total flux cleaned = 0.00555109 Jy ! Component: 2100 - total flux cleaned = 0.00562571 Jy ! Component: 2150 - total flux cleaned = 0.00571032 Jy ! Component: 2200 - total flux cleaned = 0.00576291 Jy ! Component: 2250 - total flux cleaned = 0.00583592 Jy ! Component: 2300 - total flux cleaned = 0.00590852 Jy ! Component: 2350 - total flux cleaned = 0.00599084 Jy ! Component: 2400 - total flux cleaned = 0.00607256 Jy ! Component: 2450 - total flux cleaned = 0.00613333 Jy ! Component: 2500 - total flux cleaned = 0.00621389 Jy ! Component: 2550 - total flux cleaned = 0.00631399 Jy ! Component: 2600 - total flux cleaned = 0.00638351 Jy ! Component: 2650 - total flux cleaned = 0.00647228 Jy ! Component: 2700 - total flux cleaned = 0.00653108 Jy ! Component: 2750 - total flux cleaned = 0.00660909 Jy ! Component: 2800 - total flux cleaned = 0.00667697 Jy ! Component: 2850 - total flux cleaned = 0.00674444 Jy ! Component: 2900 - total flux cleaned = 0.0068114 Jy ! Component: 2950 - total flux cleaned = 0.00690654 Jy ! Component: 3000 - total flux cleaned = 0.00694433 Jy ! Component: 3050 - total flux cleaned = 0.00705715 Jy ! Component: 3100 - total flux cleaned = 0.00710379 Jy ! Component: 3150 - total flux cleaned = 0.00715957 Jy ! Component: 3200 - total flux cleaned = 0.00722427 Jy ! Component: 3250 - total flux cleaned = 0.0072611 Jy ! Component: 3300 - total flux cleaned = 0.00733422 Jy ! Component: 3350 - total flux cleaned = 0.00737977 Jy ! Component: 3400 - total flux cleaned = 0.00744308 Jy ! Component: 3450 - total flux cleaned = 0.00748805 Jy ! Component: 3500 - total flux cleaned = 0.00755066 Jy ! Component: 3550 - total flux cleaned = 0.00760407 Jy ! Component: 3600 - total flux cleaned = 0.00766602 Jy ! Component: 3650 - total flux cleaned = 0.00771002 Jy ! Component: 3700 - total flux cleaned = 0.00774506 Jy ! Component: 3750 - total flux cleaned = 0.00776253 Jy ! Component: 3800 - total flux cleaned = 0.00781462 Jy ! Component: 3850 - total flux cleaned = 0.00785784 Jy ! Component: 3900 - total flux cleaned = 0.00790084 Jy ! Component: 3950 - total flux cleaned = 0.00793504 Jy ! Component: 4000 - total flux cleaned = 0.00794351 Jy ! Component: 4050 - total flux cleaned = 0.00797736 Jy ! Total flux subtracted in 4096 components = 0.00799422 Jy ! Clean residual min=-0.000453 max=0.000462 Jy/beam ! Clean residual mean=0.000001 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0347819 Jy keep ! Adding 234 model components to the UV plane model. ! The established model now contains 305 components and 0.0347818 Jy ![Exited script file: muppet] wmap "J0419-2132_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 9.01 at -2.644 degrees (North through East) ! Clean map min=-0.0019725 max=0.036134 Jy/beam ! Writing clean map to FITS file: J0419-2132_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0361336 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153523 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.27463 1.27463 2.54926 5.09852 10.197 20.3941 40.7882 81.5763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.036 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.66 x 9.01 at -2.644 degrees (North through East) ! Clean map min=-0.0019725 max=0.036134 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0419-2132_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:23 2019