! Started logfile: J0416-2056_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:13 2019 obs J0416-2056_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0416-2056_S_2017_04_28_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.965205 visibilities/baseline/integration-bin. ! Found source: J0416-2056 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 13204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0416-2056_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 318 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.967164Jy sigma=0.373268 ! Fit after self-cal, rms=0.943891Jy sigma=0.373284 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=8.62 mas, bpa=-5.624 degrees ! Estimated noise=786.377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706996 Jy ! Component: 100 - total flux cleaned = 0.0691011 Jy ! Total flux subtracted in 100 components = 0.0691011 Jy ! Clean residual min=-0.046266 max=0.049221 Jy/beam ! Clean residual mean=-0.000061 rms=0.018647 Jy/beam ! Combined flux in latest and established models = 0.0691011 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0691011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611700Jy sigma=0.026486 ! Fit after self-cal, rms=0.611788Jy sigma=0.026482 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.897 mas, bmaj=11.03 mas, bpa=-1.599 degrees ! Estimated noise=360.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0103472 Jy ! Component: 100 - total flux cleaned = -0.00263768 Jy ! Component: 150 - total flux cleaned = 0.00339879 Jy ! Component: 200 - total flux cleaned = 0.00909847 Jy ! Total flux subtracted in 200 components = 0.00909847 Jy ! Clean residual min=-0.041429 max=0.041090 Jy/beam ! Clean residual mean=-0.000091 rms=0.021726 Jy/beam ! Combined flux in latest and established models = 0.0781995 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 0.0781995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611020Jy sigma=0.019157 ! Fit after self-cal, rms=0.610982Jy sigma=0.019153 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.33 FD 0.45 HN 1.05 KP 0.50 ! LA 0.54 MK 1.31 NL 0.67 OV 0.52 ! PT 0.57 SC 1.56 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.35 FD 0.41 HN 1.08 KP 0.50 ! LA 0.52 MK 1.34 NL 0.78 OV 0.52 ! PT 0.55 SC 1.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.36 FD 0.42 HN 1.07 KP 0.52 ! LA 0.50 MK 1.36 NL 0.69 OV 0.47 ! PT 0.54 SC 1.60 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 31.53 FD 0.47 HN 1.30 KP 1.00* ! LA 49.09 MK 1.16 NL 1.00* OV 1.00* ! PT 0.61 SC 1.00* ! ! ! Fit before self-cal, rms=0.610982Jy sigma=0.019153 ! Fit after self-cal, rms=791.421204Jy sigma=0.000808 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.23 mas, bmaj=10.12 mas, bpa=-2.118 degrees ! Estimated noise=452.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00559617 Jy ! Component: 100 - total flux cleaned = 0.0050382 Jy ! Component: 150 - total flux cleaned = 0.00431103 Jy ! Component: 200 - total flux cleaned = 0.00388663 Jy ! Total flux subtracted in 200 components = 0.00388663 Jy ! Clean residual min=-0.005314 max=0.006021 Jy/beam ! Clean residual mean=-0.000010 rms=0.001472 Jy/beam ! Combined flux in latest and established models = 0.0820862 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.0820862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=791.421021Jy sigma=0.000783 ! Fit after self-cal, rms=791.421021Jy sigma=0.000765 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=791.421021Jy sigma=0.000765 ! Fit after self-cal, rms=919.576538Jy sigma=0.000748 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.088 mas, bmaj=9.891 mas, bpa=-3.138 degrees ! Estimated noise=475.045 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574084 Jy ! Component: 100 - total flux cleaned = 0.00574478 Jy ! Component: 150 - total flux cleaned = 0.00520826 Jy ! Component: 200 - total flux cleaned = 0.00488063 Jy ! Total flux subtracted in 200 components = 0.00488063 Jy ! Clean residual min=-0.004379 max=0.005894 Jy/beam ! Clean residual mean=-0.000005 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.0869668 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 0.0869668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=919.576477Jy sigma=0.000742 ! Fit after self-cal, rms=919.576416Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598249 Jy ! Component: 100 - total flux cleaned = 0.00631385 Jy ! Component: 150 - total flux cleaned = 0.00647112 Jy ! Component: 200 - total flux cleaned = 0.00632961 Jy ! Total flux subtracted in 200 components = 0.00632961 Jy ! Clean residual min=-0.004071 max=0.005247 Jy/beam ! Clean residual mean=0.000001 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.0932964 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 0.0932964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=919.576416Jy sigma=0.000734 ! Fit after self-cal, rms=919.576416Jy sigma=0.000734 ! Inverting map ! Added new window around map position (-35, 38). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181862 Jy ! Component: 100 - total flux cleaned = 0.00133902 Jy ! Component: 150 - total flux cleaned = 0.00133686 Jy ! Component: 200 - total flux cleaned = 0.0011977 Jy ! Total flux subtracted in 200 components = 0.0011977 Jy ! Clean residual min=-0.003869 max=0.004543 Jy/beam ! Clean residual mean=0.000002 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.0944941 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.0944941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=919.576416Jy sigma=0.000729 ! Fit after self-cal, rms=919.576416Jy sigma=0.000728 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=919.576416Jy sigma=0.000728 ! Fit after self-cal, rms=1103.730347Jy sigma=0.000704 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=9.766 mas, bpa=-3.757 degrees ! Estimated noise=485.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00298518 Jy ! Component: 100 - total flux cleaned = 0.00243179 Jy ! Component: 150 - total flux cleaned = 0.00255196 Jy ! Component: 200 - total flux cleaned = 0.00266982 Jy ! Total flux subtracted in 200 components = 0.00266982 Jy ! Clean residual min=-0.003550 max=0.003947 Jy/beam ! Clean residual mean=0.000014 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.097164 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.097164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1103.730347Jy sigma=0.000699 ! Fit after self-cal, rms=1103.730347Jy sigma=0.000698 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.98681e-05 Jy ! Component: 100 - total flux cleaned = 1.12758e-05 Jy ! Component: 150 - total flux cleaned = 0.0001145 Jy ! Component: 200 - total flux cleaned = 9.86085e-06 Jy ! Total flux subtracted in 200 components = 9.86085e-06 Jy ! Clean residual min=-0.003388 max=0.003972 Jy/beam ! Clean residual mean=0.000014 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.0971738 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 74 components and 0.0971738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1103.730347Jy sigma=0.000697 ! Fit after self-cal, rms=1103.730347Jy sigma=0.000697 ! Inverting map ! Added new window around map position (0, -89). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319323 Jy ! Component: 100 - total flux cleaned = 0.00398101 Jy ! Component: 150 - total flux cleaned = 0.00449685 Jy ! Component: 200 - total flux cleaned = 0.00489371 Jy ! Total flux subtracted in 200 components = 0.00489371 Jy ! Clean residual min=-0.003186 max=0.003603 Jy/beam ! Clean residual mean=0.000013 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.102068 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 88 components and 0.102068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1103.730347Jy sigma=0.000694 ! Fit after self-cal, rms=1103.730347Jy sigma=0.000693 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1103.730347Jy sigma=0.000693 ! Fit after self-cal, rms=1272.725220Jy sigma=0.000691 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.359 mas, bmaj=18.55 mas, bpa=4.931 degrees ! Estimated noise=496.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278026 Jy ! Component: 100 - total flux cleaned = 0.00298141 Jy ! Component: 150 - total flux cleaned = 0.00309678 Jy ! Component: 200 - total flux cleaned = 0.00320428 Jy ! Total flux subtracted in 200 components = 0.00320428 Jy ! Clean residual min=-0.002791 max=0.002916 Jy/beam ! Clean residual mean=0.000018 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.105272 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 0.105272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1272.725220Jy sigma=0.000689 ! Fit after self-cal, rms=1272.725220Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.56869e-05 Jy ! Component: 100 - total flux cleaned = 3.08434e-05 Jy ! Component: 150 - total flux cleaned = 7.70022e-05 Jy ! Component: 200 - total flux cleaned = 0.000165416 Jy ! Total flux subtracted in 200 components = 0.000165416 Jy ! Clean residual min=-0.002763 max=0.002903 Jy/beam ! Clean residual mean=0.000018 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.105437 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 0.105437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1272.725220Jy sigma=0.000688 ! Fit after self-cal, rms=1272.725220Jy sigma=0.000688 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=9.645 mas, bpa=-4.03 degrees ! Estimated noise=492.383 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.881 x 9.645 at -4.03 degrees (North through East) ! Clean map min=-0.011086 max=0.10094 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.131 mas, bmaj=8.102 mas, bpa=-5.618 degrees ! Estimated noise=852.882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0875956 Jy ! Component: 100 - total flux cleaned = 0.090893 Jy ! Component: 150 - total flux cleaned = 0.0871354 Jy ! Component: 200 - total flux cleaned = 0.0876048 Jy ! Total flux subtracted in 200 components = 0.0876048 Jy ! Clean residual min=-0.007304 max=0.008553 Jy/beam ! Clean residual mean=0.000007 rms=0.001677 Jy/beam ! Combined flux in latest and established models = 0.0876048 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0876048 Jy ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=9.645 mas, bpa=-4.03 degrees ! Estimated noise=492.383 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (32, -42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00293995 Jy ! Component: 100 - total flux cleaned = 0.00464748 Jy ! Component: 150 - total flux cleaned = 0.00550791 Jy ! Component: 200 - total flux cleaned = 0.00590927 Jy ! Total flux subtracted in 200 components = 0.00590927 Jy ! Clean residual min=-0.004471 max=0.005416 Jy/beam ! Clean residual mean=0.000006 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0935141 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 42 components and 0.0935141 Jy ! Inverting map ! Added new window around map position (2, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144746 Jy ! Component: 100 - total flux cleaned = 0.00288782 Jy ! Component: 150 - total flux cleaned = 0.00370311 Jy ! Component: 200 - total flux cleaned = 0.00430344 Jy ! Total flux subtracted in 200 components = 0.00430344 Jy ! Clean residual min=-0.003793 max=0.004258 Jy/beam ! Clean residual mean=0.000008 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.0978175 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.0978175 Jy ! Inverting map ! Added new window around map position (89.5, 98.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321973 Jy ! Component: 100 - total flux cleaned = 0.00322514 Jy ! Component: 150 - total flux cleaned = 0.00347953 Jy ! Component: 200 - total flux cleaned = 0.00359975 Jy ! Total flux subtracted in 200 components = 0.00359975 Jy ! Clean residual min=-0.003353 max=0.003498 Jy/beam ! Clean residual mean=0.000007 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.101417 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 83 components and 0.101417 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.359 mas, bmaj=18.55 mas, bpa=4.931 degrees ! Estimated noise=496.578 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000423419 Jy ! Component: 100 - total flux cleaned = -0.000843366 Jy ! Component: 150 - total flux cleaned = -0.000844595 Jy ! Component: 200 - total flux cleaned = -0.000717727 Jy ! Total flux subtracted in 200 components = -0.000717727 Jy ! Clean residual min=-0.002742 max=0.002815 Jy/beam ! Clean residual mean=0.000007 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.1007 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000176331 Jy ! Component: 100 - total flux cleaned = 0.000396487 Jy ! Component: 150 - total flux cleaned = 0.0004471 Jy ! Component: 200 - total flux cleaned = 0.000447796 Jy ! Total flux subtracted in 200 components = 0.000447796 Jy ! Clean residual min=-0.002660 max=0.002740 Jy/beam ! Clean residual mean=0.000007 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.101147 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 123 components and 0.101147 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.881 mas, bmaj=9.645 mas, bpa=-4.03 degrees ! Estimated noise=492.383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542283 Jy ! Component: 100 - total flux cleaned = 0.000427984 Jy ! Component: 150 - total flux cleaned = 0.000627777 Jy ! Component: 200 - total flux cleaned = 0.000628585 Jy ! Total flux subtracted in 200 components = 0.000628585 Jy ! Clean residual min=-0.002929 max=0.003004 Jy/beam ! Clean residual mean=0.000006 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 0.101776 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 137 components and 0.101776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1272.725220Jy sigma=0.000685 ! Fit after self-cal, rms=1272.725220Jy sigma=0.000685 wmodel J0416-2056_S_2017_04_28_pus_map.mod ! Writing 137 model components to file: J0416-2056_S_2017_04_28_pus_map.mod wobs J0416-2056_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0416-2056_S_2017_04_28_pus_uvs.fits wwins J0416-2056_S_2017_04_28_pus_map.win ! wwins: Wrote 7 windows to J0416-2056_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000783275 Jy ! Component: 100 - total flux cleaned = 0.00103789 Jy ! Component: 150 - total flux cleaned = 0.00118287 Jy ! Component: 200 - total flux cleaned = 0.0014128 Jy ! Component: 250 - total flux cleaned = 0.00154491 Jy ! Component: 300 - total flux cleaned = 0.00158688 Jy ! Component: 350 - total flux cleaned = 0.00171127 Jy ! Component: 400 - total flux cleaned = 0.00179113 Jy ! Component: 450 - total flux cleaned = 0.00190831 Jy ! Component: 500 - total flux cleaned = 0.00206063 Jy ! Component: 550 - total flux cleaned = 0.00213503 Jy ! Component: 600 - total flux cleaned = 0.00231766 Jy ! Component: 650 - total flux cleaned = 0.00256807 Jy ! Component: 700 - total flux cleaned = 0.00284883 Jy ! Component: 750 - total flux cleaned = 0.00305592 Jy ! Component: 800 - total flux cleaned = 0.00336131 Jy ! Component: 850 - total flux cleaned = 0.00352817 Jy ! Component: 900 - total flux cleaned = 0.00382532 Jy ! Component: 950 - total flux cleaned = 0.00395571 Jy ! Component: 1000 - total flux cleaned = 0.00418126 Jy ! Component: 1050 - total flux cleaned = 0.00434021 Jy ! Component: 1100 - total flux cleaned = 0.00452894 Jy ! Component: 1150 - total flux cleaned = 0.00474624 Jy ! Component: 1200 - total flux cleaned = 0.00489971 Jy ! Component: 1250 - total flux cleaned = 0.00505123 Jy ! Component: 1300 - total flux cleaned = 0.00517132 Jy ! Component: 1350 - total flux cleaned = 0.00534952 Jy ! Component: 1400 - total flux cleaned = 0.00549629 Jy ! Component: 1450 - total flux cleaned = 0.00558331 Jy ! Component: 1500 - total flux cleaned = 0.00581408 Jy ! Component: 1550 - total flux cleaned = 0.00592812 Jy ! Component: 1600 - total flux cleaned = 0.00612597 Jy ! Component: 1650 - total flux cleaned = 0.00620988 Jy ! Component: 1700 - total flux cleaned = 0.0063766 Jy ! Component: 1750 - total flux cleaned = 0.00651398 Jy ! Component: 1800 - total flux cleaned = 0.0065957 Jy ! Component: 1850 - total flux cleaned = 0.00675846 Jy ! Component: 1900 - total flux cleaned = 0.00694699 Jy ! Component: 1950 - total flux cleaned = 0.0070804 Jy ! Component: 2000 - total flux cleaned = 0.00729151 Jy ! Component: 2050 - total flux cleaned = 0.00736998 Jy ! Component: 2100 - total flux cleaned = 0.00750044 Jy ! Component: 2150 - total flux cleaned = 0.00768171 Jy ! Component: 2200 - total flux cleaned = 0.00786129 Jy ! Component: 2250 - total flux cleaned = 0.00801365 Jy ! Component: 2300 - total flux cleaned = 0.00821559 Jy ! Component: 2350 - total flux cleaned = 0.00836618 Jy ! Component: 2400 - total flux cleaned = 0.00844091 Jy ! Component: 2450 - total flux cleaned = 0.00854 Jy ! Component: 2500 - total flux cleaned = 0.00868771 Jy ! Component: 2550 - total flux cleaned = 0.00883401 Jy ! Component: 2600 - total flux cleaned = 0.00895502 Jy ! Component: 2650 - total flux cleaned = 0.00900335 Jy ! Component: 2700 - total flux cleaned = 0.00909895 Jy ! Component: 2750 - total flux cleaned = 0.00924171 Jy ! Component: 2800 - total flux cleaned = 0.00926543 Jy ! Component: 2850 - total flux cleaned = 0.00935922 Jy ! Component: 2900 - total flux cleaned = 0.00947596 Jy ! Component: 2950 - total flux cleaned = 0.00961497 Jy ! Component: 3000 - total flux cleaned = 0.00966082 Jy ! Component: 3050 - total flux cleaned = 0.00963793 Jy ! Component: 3100 - total flux cleaned = 0.00979753 Jy ! Component: 3150 - total flux cleaned = 0.00981998 Jy ! Component: 3200 - total flux cleaned = 0.00988768 Jy ! Component: 3250 - total flux cleaned = 0.0100221 Jy ! Component: 3300 - total flux cleaned = 0.00999988 Jy ! Component: 3350 - total flux cleaned = 0.0100221 Jy ! Component: 3400 - total flux cleaned = 0.0101322 Jy ! Component: 3450 - total flux cleaned = 0.0100882 Jy ! Component: 3500 - total flux cleaned = 0.0101101 Jy ! Component: 3550 - total flux cleaned = 0.0101101 Jy ! Component: 3600 - total flux cleaned = 0.0101319 Jy ! Component: 3650 - total flux cleaned = 0.0102391 Jy ! Component: 3700 - total flux cleaned = 0.0103243 Jy ! Component: 3750 - total flux cleaned = 0.0103242 Jy ! Component: 3800 - total flux cleaned = 0.01043 Jy ! Component: 3850 - total flux cleaned = 0.0104088 Jy ! Component: 3900 - total flux cleaned = 0.0104088 Jy ! Component: 3950 - total flux cleaned = 0.010513 Jy ! Component: 4000 - total flux cleaned = 0.0105129 Jy ! Component: 4050 - total flux cleaned = 0.0105544 Jy ! Total flux subtracted in 4096 components = 0.0106162 Jy ! Clean residual min=-0.001024 max=0.001108 Jy/beam ! Clean residual mean=0.000006 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.112392 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 363 components and 0.112392 Jy ![Exited script file: muppet] wmap "J0416-2056_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.881 x 9.645 at -4.03 degrees (North through East) ! Clean map min=-0.0050879 max=0.11005 Jy/beam ! Writing clean map to FITS file: J0416-2056_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11005 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000375718 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.02422 1.02422 2.04845 4.09689 8.19378 16.3876 32.7751 65.5503 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.11 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.881 x 9.645 at -4.03 degrees (North through East) ! Clean map min=-0.0050879 max=0.11005 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0416-2056_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:18 2019