! Started logfile: J0416-1851_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:38:40 2019 obs J0416-1851_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0416-1851_S_2017_05_31_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.706667 visibilities/baseline/integration-bin. ! Found source: J0416-1851 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 1272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0416-1851_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.556084Jy sigma=0.004278 ! Fit after self-cal, rms=0.545500Jy sigma=0.004213 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=11.3 mas, bpa=-1.761 degrees ! Estimated noise=4138 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.368074 Jy ! Component: 100 - total flux cleaned = 0.449201 Jy ! Total flux subtracted in 100 components = 0.449201 Jy ! Clean residual min=-0.029548 max=0.029476 Jy/beam ! Clean residual mean=-0.000053 rms=0.008167 Jy/beam ! Combined flux in latest and established models = 0.449201 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.449201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238055Jy sigma=0.000800 ! Fit after self-cal, rms=0.238051Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.298 mas, bmaj=12.38 mas, bpa=-0.04094 degrees ! Estimated noise=3231.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190408 Jy ! Component: 100 - total flux cleaned = 0.0244397 Jy ! Component: 150 - total flux cleaned = 0.0247442 Jy ! Component: 200 - total flux cleaned = 0.0249872 Jy ! Total flux subtracted in 200 components = 0.0249872 Jy ! Clean residual min=-0.022369 max=0.014285 Jy/beam ! Clean residual mean=-0.000048 rms=0.004909 Jy/beam ! Combined flux in latest and established models = 0.474188 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 26 components and 0.474188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232190Jy sigma=0.000795 ! Fit after self-cal, rms=0.232183Jy sigma=0.000795 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.42 FD 0.99 HN 1.01 KP 1.03 ! LA 1.03 MK 1.00* NL 0.93 OV 1.02 ! PT 1.04 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.04 KP 1.00 ! LA 0.99 MK 1.00* NL 1.08 OV 1.03 ! PT 1.02 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 0.99 KP 1.01 ! LA 0.98 MK 1.00* NL 1.03 OV 0.94 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.98 KP 1.16 ! LA 1.07 MK 1.00* NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.232183Jy sigma=0.000795 ! Fit after self-cal, rms=0.093853Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.324 mas, bmaj=12.37 mas, bpa=0.1788 degrees ! Estimated noise=3217.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00114721 Jy ! Component: 100 - total flux cleaned = -0.0010059 Jy ! Component: 150 - total flux cleaned = -0.000884316 Jy ! Component: 200 - total flux cleaned = -0.000834238 Jy ! Total flux subtracted in 200 components = -0.000834238 Jy ! Clean residual min=-0.007706 max=0.007172 Jy/beam ! Clean residual mean=0.000003 rms=0.002143 Jy/beam ! Combined flux in latest and established models = 0.473354 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.473354 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093757Jy sigma=0.000662 ! Fit after self-cal, rms=0.093590Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093590Jy sigma=0.000661 ! Fit after self-cal, rms=0.093559Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.327 mas, bmaj=12.38 mas, bpa=0.1736 degrees ! Estimated noise=3218.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000426805 Jy ! Component: 100 - total flux cleaned = -0.000379806 Jy ! Component: 150 - total flux cleaned = -0.000292912 Jy ! Component: 200 - total flux cleaned = -0.000254593 Jy ! Total flux subtracted in 200 components = -0.000254593 Jy ! Clean residual min=-0.007732 max=0.007114 Jy/beam ! Clean residual mean=0.000004 rms=0.002125 Jy/beam ! Combined flux in latest and established models = 0.473099 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 49 components and 0.473099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093516Jy sigma=0.000661 ! Fit after self-cal, rms=0.093510Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66362e-07 Jy ! Component: 100 - total flux cleaned = 3.9084e-05 Jy ! Component: 150 - total flux cleaned = 0.000104703 Jy ! Component: 200 - total flux cleaned = 0.000133404 Jy ! Total flux subtracted in 200 components = 0.000133404 Jy ! Clean residual min=-0.007708 max=0.007112 Jy/beam ! Clean residual mean=0.000003 rms=0.002114 Jy/beam ! Combined flux in latest and established models = 0.473232 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 57 components and 0.473232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093487Jy sigma=0.000661 ! Fit after self-cal, rms=0.093481Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093481Jy sigma=0.000661 ! Fit after self-cal, rms=0.093499Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.33 mas, bmaj=12.38 mas, bpa=0.1651 degrees ! Estimated noise=3220.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.32315e-05 Jy ! Component: 100 - total flux cleaned = -3.2108e-05 Jy ! Component: 150 - total flux cleaned = -3.74939e-06 Jy ! Component: 200 - total flux cleaned = 2.11889e-05 Jy ! Total flux subtracted in 200 components = 2.11889e-05 Jy ! Clean residual min=-0.007771 max=0.007056 Jy/beam ! Clean residual mean=0.000004 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 0.473254 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 62 components and 0.473254 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093482Jy sigma=0.000661 ! Fit after self-cal, rms=0.093477Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.25799e-05 Jy ! Component: 100 - total flux cleaned = 6.03797e-05 Jy ! Component: 150 - total flux cleaned = 8.40085e-05 Jy ! Component: 200 - total flux cleaned = 8.30612e-05 Jy ! Total flux subtracted in 200 components = 8.30612e-05 Jy ! Clean residual min=-0.007774 max=0.007065 Jy/beam ! Clean residual mean=0.000004 rms=0.002101 Jy/beam ! Combined flux in latest and established models = 0.473337 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 0.473337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093465Jy sigma=0.000661 ! Fit after self-cal, rms=0.093461Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093461Jy sigma=0.000661 ! Fit after self-cal, rms=0.093484Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.96 mas, bmaj=17.52 mas, bpa=-9.994 degrees ! Estimated noise=3832.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00024137 Jy ! Component: 100 - total flux cleaned = 0.000293633 Jy ! Component: 150 - total flux cleaned = 0.000315776 Jy ! Component: 200 - total flux cleaned = 0.000352874 Jy ! Total flux subtracted in 200 components = 0.000352874 Jy ! Clean residual min=-0.009157 max=0.007136 Jy/beam ! Clean residual mean=0.000007 rms=0.002501 Jy/beam ! Combined flux in latest and established models = 0.47369 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.47369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093482Jy sigma=0.000661 ! Fit after self-cal, rms=0.093472Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.19562e-05 Jy ! Component: 100 - total flux cleaned = 9.00741e-06 Jy ! Component: 150 - total flux cleaned = 2.75454e-05 Jy ! Component: 200 - total flux cleaned = 2.83206e-05 Jy ! Total flux subtracted in 200 components = 2.83206e-05 Jy ! Clean residual min=-0.009175 max=0.007098 Jy/beam ! Clean residual mean=0.000007 rms=0.002497 Jy/beam ! Combined flux in latest and established models = 0.473718 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.473718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093473Jy sigma=0.000661 ! Fit after self-cal, rms=0.093466Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=12.38 mas, bpa=0.1564 degrees ! Estimated noise=3221.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.331 x 12.38 at 0.1564 degrees (North through East) ! Clean map min=-0.0076773 max=0.46288 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.622 mas, bmaj=11.35 mas, bpa=-1.457 degrees ! Estimated noise=4017.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.357335 Jy ! Component: 100 - total flux cleaned = 0.435283 Jy ! Component: 150 - total flux cleaned = 0.454365 Jy ! Component: 200 - total flux cleaned = 0.464024 Jy ! Total flux subtracted in 200 components = 0.464024 Jy ! Clean residual min=-0.010859 max=0.009843 Jy/beam ! Clean residual mean=0.000003 rms=0.002757 Jy/beam ! Combined flux in latest and established models = 0.464024 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.464024 Jy ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=12.38 mas, bpa=0.1564 degrees ! Estimated noise=3221.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724125 Jy ! Component: 100 - total flux cleaned = 0.0103177 Jy ! Component: 150 - total flux cleaned = 0.0105874 Jy ! Component: 200 - total flux cleaned = 0.0106657 Jy ! Total flux subtracted in 200 components = 0.0106657 Jy ! Clean residual min=-0.007966 max=0.006764 Jy/beam ! Clean residual mean=0.000000 rms=0.002149 Jy/beam ! Combined flux in latest and established models = 0.47469 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.47469 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.96 mas, bmaj=17.52 mas, bpa=-9.994 degrees ! Estimated noise=3832.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000474325 Jy ! Component: 100 - total flux cleaned = 0.000407476 Jy ! Component: 150 - total flux cleaned = 0.000354499 Jy ! Component: 200 - total flux cleaned = 0.00030903 Jy ! Total flux subtracted in 200 components = 0.00030903 Jy ! Clean residual min=-0.009035 max=0.006998 Jy/beam ! Clean residual mean=0.000002 rms=0.002505 Jy/beam ! Combined flux in latest and established models = 0.474999 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.21739e-05 Jy ! Component: 100 - total flux cleaned = -0.000100914 Jy ! Component: 150 - total flux cleaned = -0.000127197 Jy ! Component: 200 - total flux cleaned = -0.000152254 Jy ! Total flux subtracted in 200 components = -0.000152254 Jy ! Clean residual min=-0.009042 max=0.006998 Jy/beam ! Clean residual mean=0.000003 rms=0.002487 Jy/beam ! Combined flux in latest and established models = 0.474846 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.474846 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.331 mas, bmaj=12.38 mas, bpa=0.1564 degrees ! Estimated noise=3221.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145564 Jy ! Component: 100 - total flux cleaned = 9.71018e-05 Jy ! Component: 150 - total flux cleaned = 5.93571e-05 Jy ! Component: 200 - total flux cleaned = -3.24693e-05 Jy ! Total flux subtracted in 200 components = -3.24693e-05 Jy ! Clean residual min=-0.007734 max=0.006779 Jy/beam ! Clean residual mean=0.000002 rms=0.002097 Jy/beam ! Combined flux in latest and established models = 0.474814 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 66 components and 0.474814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093500Jy sigma=0.000661 ! Fit after self-cal, rms=0.093494Jy sigma=0.000661 wmodel J0416-1851_S_2017_05_31_pus_map.mod ! Writing 66 model components to file: J0416-1851_S_2017_05_31_pus_map.mod wobs J0416-1851_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0416-1851_S_2017_05_31_pus_uvs.fits wwins J0416-1851_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0416-1851_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00308902 Jy ! Component: 100 - total flux cleaned = -0.0040702 Jy ! Component: 150 - total flux cleaned = -0.00464048 Jy ! Component: 200 - total flux cleaned = -0.00442761 Jy ! Component: 250 - total flux cleaned = -0.00423032 Jy ! Component: 300 - total flux cleaned = -0.00413751 Jy ! Component: 350 - total flux cleaned = -0.00431589 Jy ! Component: 400 - total flux cleaned = -0.00423262 Jy ! Component: 450 - total flux cleaned = -0.00439894 Jy ! Component: 500 - total flux cleaned = -0.00455427 Jy ! Component: 550 - total flux cleaned = -0.00447911 Jy ! Component: 600 - total flux cleaned = -0.0046267 Jy ! Component: 650 - total flux cleaned = -0.00476669 Jy ! Component: 700 - total flux cleaned = -0.00497198 Jy ! Component: 750 - total flux cleaned = -0.00490428 Jy ! Component: 800 - total flux cleaned = -0.00516061 Jy ! Component: 850 - total flux cleaned = -0.00497286 Jy ! Component: 900 - total flux cleaned = -0.00497181 Jy ! Component: 950 - total flux cleaned = -0.0047364 Jy ! Component: 1000 - total flux cleaned = -0.00473807 Jy ! Component: 1050 - total flux cleaned = -0.00479547 Jy ! Component: 1100 - total flux cleaned = -0.00485028 Jy ! Component: 1150 - total flux cleaned = -0.00469317 Jy ! Component: 1200 - total flux cleaned = -0.00479624 Jy ! Component: 1250 - total flux cleaned = -0.00459611 Jy ! Component: 1300 - total flux cleaned = -0.00474354 Jy ! Component: 1350 - total flux cleaned = -0.00474255 Jy ! Component: 1400 - total flux cleaned = -0.00478941 Jy ! Component: 1450 - total flux cleaned = -0.00469776 Jy ! Component: 1500 - total flux cleaned = -0.00474311 Jy ! Component: 1550 - total flux cleaned = -0.00483099 Jy ! Component: 1600 - total flux cleaned = -0.00491684 Jy ! Component: 1650 - total flux cleaned = -0.00491656 Jy ! Component: 1700 - total flux cleaned = -0.00500052 Jy ! Component: 1750 - total flux cleaned = -0.00504186 Jy ! Component: 1800 - total flux cleaned = -0.00504194 Jy ! Component: 1850 - total flux cleaned = -0.00500182 Jy ! Component: 1900 - total flux cleaned = -0.00500175 Jy ! Component: 1950 - total flux cleaned = -0.00496314 Jy ! Component: 2000 - total flux cleaned = -0.00507717 Jy ! Component: 2050 - total flux cleaned = -0.00492609 Jy ! Component: 2100 - total flux cleaned = -0.00500108 Jy ! Component: 2150 - total flux cleaned = -0.00503772 Jy ! Component: 2200 - total flux cleaned = -0.00496527 Jy ! Component: 2250 - total flux cleaned = -0.00510954 Jy ! Component: 2300 - total flux cleaned = -0.00518018 Jy ! Component: 2350 - total flux cleaned = -0.00514478 Jy ! Component: 2400 - total flux cleaned = -0.0051452 Jy ! Component: 2450 - total flux cleaned = -0.00521452 Jy ! Component: 2500 - total flux cleaned = -0.00521452 Jy ! Component: 2550 - total flux cleaned = -0.00521482 Jy ! Component: 2600 - total flux cleaned = -0.00524865 Jy ! Component: 2650 - total flux cleaned = -0.00528202 Jy ! Component: 2700 - total flux cleaned = -0.00518311 Jy ! Component: 2750 - total flux cleaned = -0.00528165 Jy ! Component: 2800 - total flux cleaned = -0.00511886 Jy ! Component: 2850 - total flux cleaned = -0.00502222 Jy ! Component: 2900 - total flux cleaned = -0.00489452 Jy ! Component: 2950 - total flux cleaned = -0.00486287 Jy ! Component: 3000 - total flux cleaned = -0.00473642 Jy ! Component: 3050 - total flux cleaned = -0.00464244 Jy ! Component: 3100 - total flux cleaned = -0.00457993 Jy ! Component: 3150 - total flux cleaned = -0.00451786 Jy ! Component: 3200 - total flux cleaned = -0.00442497 Jy ! Component: 3250 - total flux cleaned = -0.0043635 Jy ! Component: 3300 - total flux cleaned = -0.00424102 Jy ! Component: 3350 - total flux cleaned = -0.00421061 Jy ! Component: 3400 - total flux cleaned = -0.00408893 Jy ! Component: 3450 - total flux cleaned = -0.00396793 Jy ! Component: 3500 - total flux cleaned = -0.00393784 Jy ! Component: 3550 - total flux cleaned = -0.00387778 Jy ! Component: 3600 - total flux cleaned = -0.0037878 Jy ! Component: 3650 - total flux cleaned = -0.00375799 Jy ! Component: 3700 - total flux cleaned = -0.00369853 Jy ! Component: 3750 - total flux cleaned = -0.00360922 Jy ! Component: 3800 - total flux cleaned = -0.00357959 Jy ! Component: 3850 - total flux cleaned = -0.00349083 Jy ! Component: 3900 - total flux cleaned = -0.00346119 Jy ! Component: 3950 - total flux cleaned = -0.00337257 Jy ! Component: 4000 - total flux cleaned = -0.00331367 Jy ! Component: 4050 - total flux cleaned = -0.00325461 Jy ! Total flux subtracted in 4096 components = -0.00322524 Jy ! Clean residual min=-0.001751 max=0.002364 Jy/beam ! Clean residual mean=0.000005 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 0.471589 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 339 components and 0.471589 Jy ![Exited script file: muppet] wmap "J0416-1851_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.331 x 12.38 at 0.1564 degrees (North through East) ! Clean map min=-0.0044258 max=0.4616 Jy/beam ! Writing clean map to FITS file: J0416-1851_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.461604 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000573573 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.37277 0.37277 0.74554 1.49108 2.98216 5.96432 11.9286 23.8573 47.7146 95.4291 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.461 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.331 x 12.38 at 0.1564 degrees (North through East) ! Clean map min=-0.0044258 max=0.4616 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0416-1851_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:38:49 2019