! Started logfile: J0416-1851_S_2017_04_28_pus_uvs.log on Thu May 2 16:16:08 2019 obs J0416-1851_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0416-1851_S_2017_04_28_pus_uva.fits ! AN table 1: 15 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.85037 visibilities/baseline/integration-bin. ! Found source: J0416-1851 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 2296 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0416-1851_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.637155Jy sigma=0.045609 ! Fit after self-cal, rms=0.656552Jy sigma=0.045568 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=7.141 mas, bpa=-7.391 degrees ! Estimated noise=1128.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11086 Jy ! Component: 100 - total flux cleaned = 0.168612 Jy ! Total flux subtracted in 100 components = 0.168612 Jy ! Clean residual min=-0.053713 max=0.059918 Jy/beam ! Clean residual mean=-0.000041 rms=0.016420 Jy/beam ! Combined flux in latest and established models = 0.168612 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.168612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306627Jy sigma=0.004653 ! Fit after self-cal, rms=0.305663Jy sigma=0.004651 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.57 mas, bmaj=7.549 mas, bpa=-5.889 degrees ! Estimated noise=1173.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612241 Jy ! Component: 100 - total flux cleaned = 0.092966 Jy ! Component: 150 - total flux cleaned = 0.0978878 Jy ! Component: 200 - total flux cleaned = 0.10339 Jy ! Total flux subtracted in 200 components = 0.10339 Jy ! Clean residual min=-0.052328 max=0.056238 Jy/beam ! Clean residual mean=-0.000059 rms=0.016961 Jy/beam ! Combined flux in latest and established models = 0.272001 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.272001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256777Jy sigma=0.005831 ! Fit after self-cal, rms=0.255261Jy sigma=0.005830 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.70 HN 0.78 KP 0.78 ! LA 0.85 MK 0.86 NL 0.73 OV 0.76 ! PT 0.84 SC 0.73 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.60 FD 0.67 HN 0.82 KP 0.71 ! LA 0.80 MK 0.84 NL 0.89 OV 0.75 ! PT 0.82 SC 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.66 HN 0.75 KP 0.79 ! LA 0.76 MK 0.89 NL 0.84 OV 0.71 ! PT 0.81 SC 0.81 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 32.66 FD 0.77 HN 0.96 KP 1.00* ! LA 0.70 MK 0.87 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.255261Jy sigma=0.005830 ! Fit after self-cal, rms=0.125949Jy sigma=0.001045 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.178 mas, bmaj=7.751 mas, bpa=-0.6142 degrees ! Estimated noise=1536.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0118425 Jy ! Component: 100 - total flux cleaned = -0.0168961 Jy ! Component: 150 - total flux cleaned = -0.0218566 Jy ! Component: 200 - total flux cleaned = -0.0258487 Jy ! Total flux subtracted in 200 components = -0.0258487 Jy ! Clean residual min=-0.012764 max=0.010571 Jy/beam ! Clean residual mean=-0.000033 rms=0.002667 Jy/beam ! Combined flux in latest and established models = 0.246153 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 10 components and 0.246153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113134Jy sigma=0.000850 ! Fit after self-cal, rms=0.094608Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094608Jy sigma=0.000807 ! Fit after self-cal, rms=0.082408Jy sigma=0.000751 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.149 mas, bmaj=7.814 mas, bpa=-1.24 degrees ! Estimated noise=1487.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0072878 Jy ! Component: 100 - total flux cleaned = -0.00916101 Jy ! Component: 150 - total flux cleaned = -0.00977602 Jy ! Component: 200 - total flux cleaned = -0.0100383 Jy ! Total flux subtracted in 200 components = -0.0100383 Jy ! Clean residual min=-0.009246 max=0.006449 Jy/beam ! Clean residual mean=-0.000015 rms=0.001633 Jy/beam ! Combined flux in latest and established models = 0.236114 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.236114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079798Jy sigma=0.000711 ! Fit after self-cal, rms=0.080010Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04032e-07 Jy ! Component: 100 - total flux cleaned = -0.000201728 Jy ! Component: 150 - total flux cleaned = -0.000205816 Jy ! Component: 200 - total flux cleaned = -0.000358525 Jy ! Total flux subtracted in 200 components = -0.000358525 Jy ! Clean residual min=-0.008121 max=0.006458 Jy/beam ! Clean residual mean=-0.000015 rms=0.001512 Jy/beam ! Combined flux in latest and established models = 0.235756 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 21 components and 0.235756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079334Jy sigma=0.000700 ! Fit after self-cal, rms=0.079327Jy sigma=0.000699 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079327Jy sigma=0.000699 ! Fit after self-cal, rms=0.078281Jy sigma=0.000693 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.789 mas, bpa=-1.669 degrees ! Estimated noise=1486.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00356261 Jy ! Component: 100 - total flux cleaned = -0.00356466 Jy ! Component: 150 - total flux cleaned = -0.00372977 Jy ! Component: 200 - total flux cleaned = -0.00372034 Jy ! Total flux subtracted in 200 components = -0.00372034 Jy ! Clean residual min=-0.006615 max=0.004634 Jy/beam ! Clean residual mean=-0.000010 rms=0.001280 Jy/beam ! Combined flux in latest and established models = 0.232036 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 22 components and 0.232036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077550Jy sigma=0.000682 ! Fit after self-cal, rms=0.077549Jy sigma=0.000682 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.45782e-05 Jy ! Component: 100 - total flux cleaned = -0.000126505 Jy ! Component: 150 - total flux cleaned = -0.000331747 Jy ! Component: 200 - total flux cleaned = -0.000428187 Jy ! Total flux subtracted in 200 components = -0.000428187 Jy ! Clean residual min=-0.006158 max=0.004696 Jy/beam ! Clean residual mean=-0.000010 rms=0.001240 Jy/beam ! Combined flux in latest and established models = 0.231607 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.231607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077293Jy sigma=0.000679 ! Fit after self-cal, rms=0.077287Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077287Jy sigma=0.000679 ! Fit after self-cal, rms=0.077175Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.649 mas, bmaj=15.88 mas, bpa=5.34 degrees ! Estimated noise=1886.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000877438 Jy ! Component: 100 - total flux cleaned = 0.000880359 Jy ! Component: 150 - total flux cleaned = 0.000777434 Jy ! Component: 200 - total flux cleaned = 0.000733795 Jy ! Total flux subtracted in 200 components = 0.000733795 Jy ! Clean residual min=-0.005812 max=0.004035 Jy/beam ! Clean residual mean=-0.000015 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.232341 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 30 components and 0.232341 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077090Jy sigma=0.000675 ! Fit after self-cal, rms=0.077087Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.19958e-05 Jy ! Component: 100 - total flux cleaned = -0.0001065 Jy ! Component: 150 - total flux cleaned = -0.000172652 Jy ! Component: 200 - total flux cleaned = -0.000231019 Jy ! Total flux subtracted in 200 components = -0.000231019 Jy ! Clean residual min=-0.005739 max=0.003988 Jy/beam ! Clean residual mean=-0.000015 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.23211 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.23211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077066Jy sigma=0.000675 ! Fit after self-cal, rms=0.077057Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=7.768 mas, bpa=-1.872 degrees ! Estimated noise=1481.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 7.768 at -1.872 degrees (North through East) ! Clean map min=-0.0052363 max=0.20633 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.646 mas, bmaj=6.871 mas, bpa=-2.85 degrees ! Estimated noise=1784.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170057 Jy ! Component: 100 - total flux cleaned = 0.207757 Jy ! Component: 150 - total flux cleaned = 0.218977 Jy ! Component: 200 - total flux cleaned = 0.221176 Jy ! Total flux subtracted in 200 components = 0.221176 Jy ! Clean residual min=-0.007012 max=0.005725 Jy/beam ! Clean residual mean=-0.000008 rms=0.001394 Jy/beam ! Combined flux in latest and established models = 0.221176 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.221176 Jy ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=7.768 mas, bpa=-1.872 degrees ! Estimated noise=1481.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00614696 Jy ! Component: 100 - total flux cleaned = 0.00910781 Jy ! Component: 150 - total flux cleaned = 0.00946735 Jy ! Component: 200 - total flux cleaned = 0.00970171 Jy ! Total flux subtracted in 200 components = 0.00970171 Jy ! Clean residual min=-0.004642 max=0.004057 Jy/beam ! Clean residual mean=-0.000007 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.230877 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.230877 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.649 mas, bmaj=15.88 mas, bpa=5.34 degrees ! Estimated noise=1886.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173059 Jy ! Component: 100 - total flux cleaned = 0.00210229 Jy ! Component: 150 - total flux cleaned = 0.00236982 Jy ! Component: 200 - total flux cleaned = 0.00252864 Jy ! Total flux subtracted in 200 components = 0.00252864 Jy ! Clean residual min=-0.004757 max=0.003698 Jy/beam ! Clean residual mean=-0.000013 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 0.233406 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000106576 Jy ! Component: 100 - total flux cleaned = 0.000205752 Jy ! Component: 150 - total flux cleaned = 0.000296165 Jy ! Component: 200 - total flux cleaned = 0.000378878 Jy ! Total flux subtracted in 200 components = 0.000378878 Jy ! Clean residual min=-0.004788 max=0.003697 Jy/beam ! Clean residual mean=-0.000013 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.233785 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.233785 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.112 mas, bmaj=7.768 mas, bpa=-1.872 degrees ! Estimated noise=1481.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00109516 Jy ! Component: 100 - total flux cleaned = -0.00122901 Jy ! Component: 150 - total flux cleaned = -0.00134051 Jy ! Component: 200 - total flux cleaned = -0.00134045 Jy ! Total flux subtracted in 200 components = -0.00134045 Jy ! Clean residual min=-0.004602 max=0.003712 Jy/beam ! Clean residual mean=-0.000007 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.232444 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 49 components and 0.232444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076394Jy sigma=0.000666 ! Fit after self-cal, rms=0.076307Jy sigma=0.000665 wmodel J0416-1851_S_2017_04_28_pus_map.mod ! Writing 49 model components to file: J0416-1851_S_2017_04_28_pus_map.mod wobs J0416-1851_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0416-1851_S_2017_04_28_pus_uvs.fits wwins J0416-1851_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0416-1851_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205865 Jy ! Component: 100 - total flux cleaned = -0.00359403 Jy ! Component: 150 - total flux cleaned = -0.00440583 Jy ! Component: 200 - total flux cleaned = -0.00498148 Jy ! Component: 250 - total flux cleaned = -0.00559188 Jy ! Component: 300 - total flux cleaned = -0.00629543 Jy ! Component: 350 - total flux cleaned = -0.00674852 Jy ! Component: 400 - total flux cleaned = -0.00713386 Jy ! Component: 450 - total flux cleaned = -0.00777195 Jy ! Component: 500 - total flux cleaned = -0.00798015 Jy ! Component: 550 - total flux cleaned = -0.00833646 Jy ! Component: 600 - total flux cleaned = -0.00873479 Jy ! Component: 650 - total flux cleaned = -0.00902716 Jy ! Component: 700 - total flux cleaned = -0.00940898 Jy ! Component: 750 - total flux cleaned = -0.00964329 Jy ! Component: 800 - total flux cleaned = -0.010012 Jy ! Component: 850 - total flux cleaned = -0.0102845 Jy ! Component: 900 - total flux cleaned = -0.0105967 Jy ! Component: 950 - total flux cleaned = -0.0111229 Jy ! Component: 1000 - total flux cleaned = -0.011468 Jy ! Component: 1050 - total flux cleaned = -0.0118508 Jy ! Component: 1100 - total flux cleaned = -0.0121433 Jy ! Component: 1150 - total flux cleaned = -0.0125148 Jy ! Component: 1200 - total flux cleaned = -0.0128002 Jy ! Component: 1250 - total flux cleaned = -0.0131626 Jy ! Component: 1300 - total flux cleaned = -0.0134004 Jy ! Component: 1350 - total flux cleaned = -0.0136357 Jy ! Component: 1400 - total flux cleaned = -0.0139061 Jy ! Component: 1450 - total flux cleaned = -0.0142489 Jy ! Component: 1500 - total flux cleaned = -0.0143997 Jy ! Component: 1550 - total flux cleaned = -0.0145482 Jy ! Component: 1600 - total flux cleaned = -0.0147691 Jy ! Component: 1650 - total flux cleaned = -0.0149513 Jy ! Component: 1700 - total flux cleaned = -0.0150601 Jy ! Component: 1750 - total flux cleaned = -0.0153095 Jy ! Component: 1800 - total flux cleaned = -0.0156263 Jy ! Component: 1850 - total flux cleaned = -0.0157655 Jy ! Component: 1900 - total flux cleaned = -0.0159033 Jy ! Component: 1950 - total flux cleaned = -0.0160732 Jy ! Component: 2000 - total flux cleaned = -0.016174 Jy ! Component: 2050 - total flux cleaned = -0.0163077 Jy ! Component: 2100 - total flux cleaned = -0.0164723 Jy ! Component: 2150 - total flux cleaned = -0.0164726 Jy ! Component: 2200 - total flux cleaned = -0.0165045 Jy ! Component: 2250 - total flux cleaned = -0.016633 Jy ! Component: 2300 - total flux cleaned = -0.0167281 Jy ! Component: 2350 - total flux cleaned = -0.0167906 Jy ! Component: 2400 - total flux cleaned = -0.0167904 Jy ! Component: 2450 - total flux cleaned = -0.0167899 Jy ! Component: 2500 - total flux cleaned = -0.0166674 Jy ! Component: 2550 - total flux cleaned = -0.0167584 Jy ! Component: 2600 - total flux cleaned = -0.0166985 Jy ! Component: 2650 - total flux cleaned = -0.016579 Jy ! Component: 2700 - total flux cleaned = -0.0165491 Jy ! Component: 2750 - total flux cleaned = -0.0166074 Jy ! Component: 2800 - total flux cleaned = -0.0164618 Jy ! Component: 2850 - total flux cleaned = -0.0164328 Jy ! Component: 2900 - total flux cleaned = -0.0163753 Jy ! Component: 2950 - total flux cleaned = -0.0163467 Jy ! Component: 3000 - total flux cleaned = -0.0162623 Jy ! Component: 3050 - total flux cleaned = -0.0161509 Jy ! Component: 3100 - total flux cleaned = -0.0162618 Jy ! Component: 3150 - total flux cleaned = -0.0162068 Jy ! Component: 3200 - total flux cleaned = -0.0161522 Jy ! Component: 3250 - total flux cleaned = -0.0161523 Jy ! Component: 3300 - total flux cleaned = -0.016179 Jy ! Component: 3350 - total flux cleaned = -0.0160455 Jy ! Component: 3400 - total flux cleaned = -0.0158869 Jy ! Component: 3450 - total flux cleaned = -0.0158872 Jy ! Component: 3500 - total flux cleaned = -0.0158091 Jy ! Component: 3550 - total flux cleaned = -0.0158866 Jy ! Component: 3600 - total flux cleaned = -0.0157583 Jy ! Component: 3650 - total flux cleaned = -0.0155543 Jy ! Component: 3700 - total flux cleaned = -0.015504 Jy ! Component: 3750 - total flux cleaned = -0.0153785 Jy ! Component: 3800 - total flux cleaned = -0.0154033 Jy ! Component: 3850 - total flux cleaned = -0.0152791 Jy ! Component: 3900 - total flux cleaned = -0.0152054 Jy ! Component: 3950 - total flux cleaned = -0.0150831 Jy ! Component: 4000 - total flux cleaned = -0.0150587 Jy ! Component: 4050 - total flux cleaned = -0.0148897 Jy ! Total flux subtracted in 4096 components = -0.0147935 Jy ! Clean residual min=-0.001519 max=0.001334 Jy/beam ! Clean residual mean=-0.000003 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.217651 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 329 components and 0.217651 Jy ![Exited script file: muppet] wmap "J0416-1851_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 7.768 at -1.872 degrees (North through East) ! Clean map min=-0.003247 max=0.21217 Jy/beam ! Writing clean map to FITS file: J0416-1851_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.212171 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000431487 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.610103 0.610103 1.22021 2.44041 4.88082 9.76164 19.5233 39.0466 78.0931 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.212 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.112 x 7.768 at -1.872 degrees (North through East) ! Clean map min=-0.003247 max=0.21217 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0416-1851_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:16:13 2019