! Started logfile: J0416-1851_S_2017_02_19_pus_uvs.log on Sat May 4 18:41:50 2019 obs J0416-1851_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0416-1851_S_2017_02_19_pus_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.679365 visibilities/baseline/integration-bin. ! Found source: J0416-1851 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0416-1851_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.517928Jy sigma=0.003834 ! Fit after self-cal, rms=0.508063Jy sigma=0.003762 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.386 mas, bmaj=6.576 mas, bpa=-2.347 degrees ! Estimated noise=4060.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.380726 Jy ! Component: 100 - total flux cleaned = 0.464346 Jy ! Total flux subtracted in 100 components = 0.464346 Jy ! Clean residual min=-0.016604 max=0.026493 Jy/beam ! Clean residual mean=-0.000035 rms=0.004886 Jy/beam ! Combined flux in latest and established models = 0.464346 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.464346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123771Jy sigma=0.000817 ! Fit after self-cal, rms=0.123769Jy sigma=0.000817 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.367 mas, bpa=-2.011 degrees ! Estimated noise=3634.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0352849 Jy ! Component: 100 - total flux cleaned = 0.0502668 Jy ! Component: 150 - total flux cleaned = 0.0590904 Jy ! Component: 200 - total flux cleaned = 0.0646489 Jy ! Total flux subtracted in 200 components = 0.0646489 Jy ! Clean residual min=-0.015849 max=0.015109 Jy/beam ! Clean residual mean=0.000028 rms=0.004021 Jy/beam ! Combined flux in latest and established models = 0.528995 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 39 components and 0.528995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112169Jy sigma=0.000756 ! Fit after self-cal, rms=0.112138Jy sigma=0.000756 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.92 HN 1.06 KP 1.06 ! LA 1.03 MK 1.01 NL 0.94 OV 1.06 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.03 KP 1.02 ! LA 0.99 MK 1.01 NL 1.03 OV 1.07 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 HN 1.04 KP 0.87 ! LA 0.78 MK 0.98 NL 1.15 OV 0.96 ! PT 1.00* SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.06 HN 1.01 KP 1.00* ! LA 0.81 MK 1.02 NL 1.00* OV 1.01 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.112138Jy sigma=0.000756 ! Fit after self-cal, rms=0.092680Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=7.39 mas, bpa=-1.933 degrees ! Estimated noise=3626.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142728 Jy ! Component: 100 - total flux cleaned = -0.000452868 Jy ! Component: 150 - total flux cleaned = -0.000490174 Jy ! Component: 200 - total flux cleaned = -0.000597973 Jy ! Total flux subtracted in 200 components = -0.000597973 Jy ! Clean residual min=-0.009471 max=0.009624 Jy/beam ! Clean residual mean=-0.000024 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.528397 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 49 components and 0.528397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092640Jy sigma=0.000653 ! Fit after self-cal, rms=0.092629Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092629Jy sigma=0.000653 ! Fit after self-cal, rms=0.092594Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=7.39 mas, bpa=-1.922 degrees ! Estimated noise=3625.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000369082 Jy ! Component: 100 - total flux cleaned = -0.000579839 Jy ! Component: 150 - total flux cleaned = -0.000670586 Jy ! Component: 200 - total flux cleaned = -0.000757496 Jy ! Total flux subtracted in 200 components = -0.000757496 Jy ! Clean residual min=-0.009410 max=0.009531 Jy/beam ! Clean residual mean=-0.000025 rms=0.002274 Jy/beam ! Combined flux in latest and established models = 0.52764 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 50 components and 0.52764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092567Jy sigma=0.000653 ! Fit after self-cal, rms=0.092566Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000144978 Jy ! Component: 100 - total flux cleaned = -0.000173838 Jy ! Component: 150 - total flux cleaned = -0.000199901 Jy ! Component: 200 - total flux cleaned = -0.000272009 Jy ! Total flux subtracted in 200 components = -0.000272009 Jy ! Clean residual min=-0.009396 max=0.009474 Jy/beam ! Clean residual mean=-0.000025 rms=0.002271 Jy/beam ! Combined flux in latest and established models = 0.527368 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.527368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092549Jy sigma=0.000653 ! Fit after self-cal, rms=0.092549Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092549Jy sigma=0.000653 ! Fit after self-cal, rms=0.092521Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.766 mas, bmaj=7.391 mas, bpa=-1.902 degrees ! Estimated noise=3623.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000543712 Jy ! Component: 100 - total flux cleaned = -0.000592467 Jy ! Component: 150 - total flux cleaned = -0.000638663 Jy ! Component: 200 - total flux cleaned = -0.000704739 Jy ! Total flux subtracted in 200 components = -0.000704739 Jy ! Clean residual min=-0.009386 max=0.009389 Jy/beam ! Clean residual mean=-0.000025 rms=0.002266 Jy/beam ! Combined flux in latest and established models = 0.526663 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 54 components and 0.526663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092505Jy sigma=0.000653 ! Fit after self-cal, rms=0.092506Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.74702e-05 Jy ! Component: 100 - total flux cleaned = -0.000108534 Jy ! Component: 150 - total flux cleaned = -0.000127554 Jy ! Component: 200 - total flux cleaned = -0.000165095 Jy ! Total flux subtracted in 200 components = -0.000165095 Jy ! Clean residual min=-0.009372 max=0.009359 Jy/beam ! Clean residual mean=-0.000025 rms=0.002265 Jy/beam ! Combined flux in latest and established models = 0.526498 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.526498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092496Jy sigma=0.000653 ! Fit after self-cal, rms=0.092496Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092496Jy sigma=0.000653 ! Fit after self-cal, rms=0.092468Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.847 mas, bmaj=15.14 mas, bpa=5.872 degrees ! Estimated noise=4926.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450769 Jy ! Component: 100 - total flux cleaned = 0.000638591 Jy ! Component: 150 - total flux cleaned = 0.000750471 Jy ! Component: 200 - total flux cleaned = 0.000848633 Jy ! Total flux subtracted in 200 components = 0.000848633 Jy ! Clean residual min=-0.010716 max=0.012317 Jy/beam ! Clean residual mean=-0.000054 rms=0.003376 Jy/beam ! Combined flux in latest and established models = 0.527347 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 62 components and 0.527347 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092534Jy sigma=0.000653 ! Fit after self-cal, rms=0.092503Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.38818e-05 Jy ! Component: 100 - total flux cleaned = 0.000217462 Jy ! Component: 150 - total flux cleaned = 0.000264685 Jy ! Component: 200 - total flux cleaned = 0.000349548 Jy ! Total flux subtracted in 200 components = 0.000349548 Jy ! Clean residual min=-0.010620 max=0.012196 Jy/beam ! Clean residual mean=-0.000054 rms=0.003350 Jy/beam ! Combined flux in latest and established models = 0.527696 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 64 components and 0.527696 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092583Jy sigma=0.000653 ! Fit after self-cal, rms=0.092565Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.392 mas, bpa=-1.877 degrees ! Estimated noise=3622.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.767 x 7.392 at -1.877 degrees (North through East) ! Clean map min=-0.0087312 max=0.4893 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=6.575 mas, bpa=-2.247 degrees ! Estimated noise=4077.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.382215 Jy ! Component: 100 - total flux cleaned = 0.466393 Jy ! Component: 150 - total flux cleaned = 0.491791 Jy ! Component: 200 - total flux cleaned = 0.503222 Jy ! Total flux subtracted in 200 components = 0.503222 Jy ! Clean residual min=-0.010800 max=0.010165 Jy/beam ! Clean residual mean=-0.000042 rms=0.002544 Jy/beam ! Combined flux in latest and established models = 0.503222 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.503222 Jy ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.392 mas, bpa=-1.877 degrees ! Estimated noise=3622.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104997 Jy ! Component: 100 - total flux cleaned = 0.0156295 Jy ! Component: 150 - total flux cleaned = 0.0183969 Jy ! Component: 200 - total flux cleaned = 0.0199884 Jy ! Total flux subtracted in 200 components = 0.0199884 Jy ! Clean residual min=-0.009582 max=0.009524 Jy/beam ! Clean residual mean=-0.000028 rms=0.002287 Jy/beam ! Combined flux in latest and established models = 0.523211 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 0.523211 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.847 mas, bmaj=15.14 mas, bpa=5.872 degrees ! Estimated noise=4926.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275618 Jy ! Component: 100 - total flux cleaned = 0.00294681 Jy ! Component: 150 - total flux cleaned = 0.00311685 Jy ! Component: 200 - total flux cleaned = 0.00326939 Jy ! Total flux subtracted in 200 components = 0.00326939 Jy ! Clean residual min=-0.010811 max=0.012158 Jy/beam ! Clean residual mean=-0.000054 rms=0.003386 Jy/beam ! Combined flux in latest and established models = 0.52648 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.13442e-05 Jy ! Component: 100 - total flux cleaned = 0.000221479 Jy ! Component: 150 - total flux cleaned = 0.000339662 Jy ! Component: 200 - total flux cleaned = 0.000413227 Jy ! Total flux subtracted in 200 components = 0.000413227 Jy ! Clean residual min=-0.010689 max=0.011947 Jy/beam ! Clean residual mean=-0.000054 rms=0.003354 Jy/beam ! Combined flux in latest and established models = 0.526893 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.526893 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.767 mas, bmaj=7.392 mas, bpa=-1.877 degrees ! Estimated noise=3622.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000750592 Jy ! Component: 100 - total flux cleaned = -0.00115859 Jy ! Component: 150 - total flux cleaned = -0.00152258 Jy ! Component: 200 - total flux cleaned = -0.00183952 Jy ! Total flux subtracted in 200 components = -0.00183952 Jy ! Clean residual min=-0.009444 max=0.009273 Jy/beam ! Clean residual mean=-0.000025 rms=0.002268 Jy/beam ! Combined flux in latest and established models = 0.525054 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 53 components and 0.525054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092507Jy sigma=0.000653 ! Fit after self-cal, rms=0.092500Jy sigma=0.000653 wmodel J0416-1851_S_2017_02_19_pus_map.mod ! Writing 53 model components to file: J0416-1851_S_2017_02_19_pus_map.mod wobs J0416-1851_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0416-1851_S_2017_02_19_pus_uvs.fits wwins J0416-1851_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0416-1851_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283476 Jy ! Component: 100 - total flux cleaned = 0.00235581 Jy ! Component: 150 - total flux cleaned = 0.00464001 Jy ! Component: 200 - total flux cleaned = 0.00539368 Jy ! Component: 250 - total flux cleaned = 0.00609876 Jy ! Component: 300 - total flux cleaned = 0.00665307 Jy ! Component: 350 - total flux cleaned = 0.006976 Jy ! Component: 400 - total flux cleaned = 0.00717941 Jy ! Component: 450 - total flux cleaned = 0.00707854 Jy ! Component: 500 - total flux cleaned = 0.00716905 Jy ! Component: 550 - total flux cleaned = 0.00688941 Jy ! Component: 600 - total flux cleaned = 0.00644515 Jy ! Component: 650 - total flux cleaned = 0.00644568 Jy ! Component: 700 - total flux cleaned = 0.00644363 Jy ! Component: 750 - total flux cleaned = 0.00636133 Jy ! Component: 800 - total flux cleaned = 0.00643919 Jy ! Component: 850 - total flux cleaned = 0.00659327 Jy ! Component: 900 - total flux cleaned = 0.00643847 Jy ! Component: 950 - total flux cleaned = 0.00651392 Jy ! Component: 1000 - total flux cleaned = 0.00636942 Jy ! Component: 1050 - total flux cleaned = 0.00637043 Jy ! Component: 1100 - total flux cleaned = 0.00623088 Jy ! Component: 1150 - total flux cleaned = 0.00609502 Jy ! Component: 1200 - total flux cleaned = 0.00609513 Jy ! Component: 1250 - total flux cleaned = 0.00589704 Jy ! Component: 1300 - total flux cleaned = 0.00583228 Jy ! Component: 1350 - total flux cleaned = 0.00576866 Jy ! Component: 1400 - total flux cleaned = 0.00564317 Jy ! Component: 1450 - total flux cleaned = 0.0055205 Jy ! Component: 1500 - total flux cleaned = 0.00564229 Jy ! Component: 1550 - total flux cleaned = 0.00564206 Jy ! Component: 1600 - total flux cleaned = 0.00569949 Jy ! Component: 1650 - total flux cleaned = 0.00564052 Jy ! Component: 1700 - total flux cleaned = 0.0055269 Jy ! Component: 1750 - total flux cleaned = 0.00541495 Jy ! Component: 1800 - total flux cleaned = 0.00547093 Jy ! Component: 1850 - total flux cleaned = 0.00557979 Jy ! Component: 1900 - total flux cleaned = 0.00557901 Jy ! Component: 1950 - total flux cleaned = 0.00563226 Jy ! Component: 2000 - total flux cleaned = 0.00568502 Jy ! Component: 2050 - total flux cleaned = 0.00578896 Jy ! Component: 2100 - total flux cleaned = 0.0058914 Jy ! Component: 2150 - total flux cleaned = 0.00609407 Jy ! Component: 2200 - total flux cleaned = 0.00619374 Jy ! Component: 2250 - total flux cleaned = 0.00634207 Jy ! Component: 2300 - total flux cleaned = 0.0066866 Jy ! Component: 2350 - total flux cleaned = 0.00693012 Jy ! Component: 2400 - total flux cleaned = 0.00697859 Jy ! Component: 2450 - total flux cleaned = 0.00721831 Jy ! Component: 2500 - total flux cleaned = 0.00736167 Jy ! Component: 2550 - total flux cleaned = 0.00750374 Jy ! Component: 2600 - total flux cleaned = 0.0076921 Jy ! Component: 2650 - total flux cleaned = 0.00787866 Jy ! Component: 2700 - total flux cleaned = 0.00806377 Jy ! Component: 2750 - total flux cleaned = 0.00815547 Jy ! Component: 2800 - total flux cleaned = 0.00829296 Jy ! Component: 2850 - total flux cleaned = 0.00824755 Jy ! Component: 2900 - total flux cleaned = 0.00833846 Jy ! Component: 2950 - total flux cleaned = 0.00833853 Jy ! Component: 3000 - total flux cleaned = 0.00829331 Jy ! Component: 3050 - total flux cleaned = 0.00838293 Jy ! Component: 3100 - total flux cleaned = 0.00838322 Jy ! Component: 3150 - total flux cleaned = 0.00842771 Jy ! Component: 3200 - total flux cleaned = 0.00838346 Jy ! Component: 3250 - total flux cleaned = 0.00838337 Jy ! Component: 3300 - total flux cleaned = 0.00838325 Jy ! Component: 3350 - total flux cleaned = 0.00851533 Jy ! Component: 3400 - total flux cleaned = 0.00860302 Jy ! Component: 3450 - total flux cleaned = 0.00873454 Jy ! Component: 3500 - total flux cleaned = 0.00873476 Jy ! Component: 3550 - total flux cleaned = 0.00877876 Jy ! Component: 3600 - total flux cleaned = 0.00895389 Jy ! Component: 3650 - total flux cleaned = 0.00895388 Jy ! Component: 3700 - total flux cleaned = 0.00904158 Jy ! Component: 3750 - total flux cleaned = 0.00917289 Jy ! Component: 3800 - total flux cleaned = 0.00930474 Jy ! Component: 3850 - total flux cleaned = 0.00939259 Jy ! Component: 3900 - total flux cleaned = 0.00943656 Jy ! Component: 3950 - total flux cleaned = 0.00961254 Jy ! Component: 4000 - total flux cleaned = 0.00974471 Jy ! Component: 4050 - total flux cleaned = 0.0097889 Jy ! Total flux subtracted in 4096 components = 0.00983289 Jy ! Clean residual min=-0.002528 max=0.002696 Jy/beam ! Clean residual mean=0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.534887 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 327 components and 0.534886 Jy ![Exited script file: muppet] wmap "J0416-1851_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.767 x 7.392 at -1.877 degrees (North through East) ! Clean map min=-0.0058624 max=0.49188 Jy/beam ! Writing clean map to FITS file: J0416-1851_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.491882 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000676845 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.412809 0.412809 0.825618 1.65124 3.30247 6.60495 13.2099 26.4198 52.8396 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.491 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.767 x 7.392 at -1.877 degrees (North through East) ! Clean map min=-0.0058624 max=0.49188 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0416-1851_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:41:54 2019