! Started logfile: J0414+053A_S_2017_06_15_pus_uvs.log on Tue May 7 15:11:04 2019 obs J0414+053A_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0414+053A_S_2017_06_15_pus_uva.fits ! AN table 1: 217 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.915515 visibilities/baseline/integration-bin. ! Found source: J0414+053A ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 35760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0414+053A_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 237 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1164 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.911620Jy sigma=0.007964 ! Fit after self-cal, rms=0.868572Jy sigma=0.007606 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=7.184 mas, bpa=-5.773 degrees ! Estimated noise=799.556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109675 Jy ! Component: 100 - total flux cleaned = 0.150762 Jy ! Total flux subtracted in 100 components = 0.150762 Jy ! Clean residual min=-0.026228 max=0.025500 Jy/beam ! Clean residual mean=0.000026 rms=0.006545 Jy/beam ! Combined flux in latest and established models = 0.150762 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.150762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171018Jy sigma=0.001519 ! Fit after self-cal, rms=0.170868Jy sigma=0.001517 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=8.019 mas, bpa=-4.413 degrees ! Estimated noise=504.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279324 Jy ! Component: 100 - total flux cleaned = 0.0436436 Jy ! Component: 150 - total flux cleaned = 0.0532785 Jy ! Component: 200 - total flux cleaned = 0.0593483 Jy ! Total flux subtracted in 200 components = 0.0593483 Jy ! Clean residual min=-0.026557 max=0.031166 Jy/beam ! Clean residual mean=0.000229 rms=0.008426 Jy/beam ! Combined flux in latest and established models = 0.21011 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 43 components and 0.21011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166803Jy sigma=0.001471 ! Fit after self-cal, rms=0.166841Jy sigma=0.001469 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.75 HN 1.40 KP 1.07 ! LA 1.07 MK 0.84 NL 0.98 OV 1.22 ! PT 0.80 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.66 FD 0.76 HN 0.95 KP 1.03 ! LA 1.23 MK 1.44 NL 1.44 OV 1.04 ! PT 0.81 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.74 HN 1.32 KP 1.24 ! LA 1.50 MK 0.92 NL 1.07 OV 0.93 ! PT 0.86 SC 1.05 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.05 KP 1.00* ! LA 0.84 MK 0.88 NL 1.00* OV 1.00* ! PT 0.71 SC 1.00* ! ! ! Fit before self-cal, rms=0.166841Jy sigma=0.001469 ! Fit after self-cal, rms=0.182737Jy sigma=0.001415 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.244 mas, bmaj=8.198 mas, bpa=-4.105 degrees ! Estimated noise=505.638 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101155 Jy ! Component: 100 - total flux cleaned = 0.000918928 Jy ! Component: 150 - total flux cleaned = 0.000923298 Jy ! Component: 200 - total flux cleaned = 0.000995221 Jy ! Total flux subtracted in 200 components = 0.000995221 Jy ! Clean residual min=-0.027977 max=0.029368 Jy/beam ! Clean residual mean=0.000258 rms=0.007753 Jy/beam ! Combined flux in latest and established models = 0.211105 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.211105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182576Jy sigma=0.001414 ! Fit after self-cal, rms=0.184636Jy sigma=0.001409 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184636Jy sigma=0.001409 ! Fit after self-cal, rms=0.285229Jy sigma=0.001354 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.286 mas, bmaj=8.294 mas, bpa=-3.632 degrees ! Estimated noise=521.495 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00085324 Jy ! Component: 100 - total flux cleaned = -0.000980102 Jy ! Component: 150 - total flux cleaned = -0.000979345 Jy ! Component: 200 - total flux cleaned = -0.000981261 Jy ! Total flux subtracted in 200 components = -0.000981261 Jy ! Clean residual min=-0.025102 max=0.026995 Jy/beam ! Clean residual mean=0.000100 rms=0.007211 Jy/beam ! Combined flux in latest and established models = 0.210124 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.210124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284967Jy sigma=0.001354 ! Fit after self-cal, rms=0.286710Jy sigma=0.001351 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000703928 Jy ! Component: 100 - total flux cleaned = -0.000701267 Jy ! Component: 150 - total flux cleaned = -0.000697791 Jy ! Component: 200 - total flux cleaned = -0.000557331 Jy ! Total flux subtracted in 200 components = -0.000557331 Jy ! Clean residual min=-0.024555 max=0.027075 Jy/beam ! Clean residual mean=0.000105 rms=0.007145 Jy/beam ! Combined flux in latest and established models = 0.209567 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 70 components and 0.209567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286544Jy sigma=0.001351 ! Fit after self-cal, rms=0.286677Jy sigma=0.001351 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286677Jy sigma=0.001351 ! Fit after self-cal, rms=0.338358Jy sigma=0.001287 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=8.43 mas, bpa=-4.117 degrees ! Estimated noise=530.214 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111138 Jy ! Component: 100 - total flux cleaned = -0.00135894 Jy ! Component: 150 - total flux cleaned = -0.00146843 Jy ! Component: 200 - total flux cleaned = -0.00156613 Jy ! Total flux subtracted in 200 components = -0.00156613 Jy ! Clean residual min=-0.025952 max=0.026366 Jy/beam ! Clean residual mean=0.000070 rms=0.006950 Jy/beam ! Combined flux in latest and established models = 0.208001 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.208001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.338165Jy sigma=0.001287 ! Fit after self-cal, rms=0.339454Jy sigma=0.001284 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000641404 Jy ! Component: 100 - total flux cleaned = -0.000859443 Jy ! Component: 150 - total flux cleaned = -0.0010442 Jy ! Component: 200 - total flux cleaned = -0.00112617 Jy ! Total flux subtracted in 200 components = -0.00112617 Jy ! Clean residual min=-0.026111 max=0.026844 Jy/beam ! Clean residual mean=0.000071 rms=0.007012 Jy/beam ! Combined flux in latest and established models = 0.206874 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 74 components and 0.206874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339306Jy sigma=0.001285 ! Fit after self-cal, rms=0.339351Jy sigma=0.001284 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.339351Jy sigma=0.001284 ! Fit after self-cal, rms=0.345731Jy sigma=0.001284 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.897 mas, bmaj=13.06 mas, bpa=-3.032 degrees ! Estimated noise=621.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111254 Jy ! Component: 100 - total flux cleaned = -0.00112697 Jy ! Component: 150 - total flux cleaned = -0.00113328 Jy ! Component: 200 - total flux cleaned = -0.0010712 Jy ! Total flux subtracted in 200 components = -0.0010712 Jy ! Clean residual min=-0.037350 max=0.039621 Jy/beam ! Clean residual mean=0.000146 rms=0.011900 Jy/beam ! Combined flux in latest and established models = 0.205803 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 81 components and 0.205803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345695Jy sigma=0.001284 ! Fit after self-cal, rms=0.345824Jy sigma=0.001284 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.98297e-05 Jy ! Component: 100 - total flux cleaned = -9.92579e-05 Jy ! Component: 150 - total flux cleaned = -5.70147e-05 Jy ! Component: 200 - total flux cleaned = -5.44397e-05 Jy ! Total flux subtracted in 200 components = -5.44397e-05 Jy ! Clean residual min=-0.037324 max=0.039628 Jy/beam ! Clean residual mean=0.000146 rms=0.011902 Jy/beam ! Combined flux in latest and established models = 0.205749 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.205749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345790Jy sigma=0.001284 ! Fit after self-cal, rms=0.345821Jy sigma=0.001284 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=8.517 mas, bpa=-4.191 degrees ! Estimated noise=535.179 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 8.517 at -4.191 degrees (North through East) ! Clean map min=-0.026145 max=0.14197 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.804 mas, bmaj=7.579 mas, bpa=-5.299 degrees ! Estimated noise=882.807 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115618 Jy ! Component: 100 - total flux cleaned = 0.157228 Jy ! Component: 150 - total flux cleaned = 0.176641 Jy ! Component: 200 - total flux cleaned = 0.188127 Jy ! Total flux subtracted in 200 components = 0.188127 Jy ! Clean residual min=-0.024544 max=0.025992 Jy/beam ! Clean residual mean=0.000014 rms=0.005937 Jy/beam ! Combined flux in latest and established models = 0.188127 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.188127 Jy ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=8.517 mas, bpa=-4.191 degrees ! Estimated noise=535.179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0078776 Jy ! Component: 100 - total flux cleaned = 0.00985755 Jy ! Component: 150 - total flux cleaned = 0.0108548 Jy ! Component: 200 - total flux cleaned = 0.0115947 Jy ! Total flux subtracted in 200 components = 0.0115947 Jy ! Clean residual min=-0.026638 max=0.026881 Jy/beam ! Clean residual mean=0.000073 rms=0.007123 Jy/beam ! Combined flux in latest and established models = 0.199722 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.199722 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.897 mas, bmaj=13.06 mas, bpa=-3.032 degrees ! Estimated noise=621.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317373 Jy ! Component: 100 - total flux cleaned = 0.00348415 Jy ! Component: 150 - total flux cleaned = 0.0037522 Jy ! Component: 200 - total flux cleaned = 0.00398996 Jy ! Total flux subtracted in 200 components = 0.00398996 Jy ! Clean residual min=-0.037335 max=0.039339 Jy/beam ! Clean residual mean=0.000147 rms=0.011916 Jy/beam ! Combined flux in latest and established models = 0.203712 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167785 Jy ! Component: 100 - total flux cleaned = 0.000326681 Jy ! Component: 150 - total flux cleaned = 0.000476545 Jy ! Component: 200 - total flux cleaned = 0.000616959 Jy ! Total flux subtracted in 200 components = 0.000616959 Jy ! Clean residual min=-0.037318 max=0.039429 Jy/beam ! Clean residual mean=0.000147 rms=0.011909 Jy/beam ! Combined flux in latest and established models = 0.204329 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.204329 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.366 mas, bmaj=8.517 mas, bpa=-4.191 degrees ! Estimated noise=535.179 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159492 Jy ! Component: 100 - total flux cleaned = -0.00181358 Jy ! Component: 150 - total flux cleaned = -0.00171346 Jy ! Component: 200 - total flux cleaned = -0.00161866 Jy ! Total flux subtracted in 200 components = -0.00161866 Jy ! Clean residual min=-0.026484 max=0.026885 Jy/beam ! Clean residual mean=0.000073 rms=0.007108 Jy/beam ! Combined flux in latest and established models = 0.20271 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 48 components and 0.20271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345778Jy sigma=0.001288 ! Fit after self-cal, rms=0.345789Jy sigma=0.001287 wmodel J0414+053A_S_2017_06_15_pus_map.mod ! Writing 48 model components to file: J0414+053A_S_2017_06_15_pus_map.mod wobs J0414+053A_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0414+053A_S_2017_06_15_pus_uvs.fits wwins J0414+053A_S_2017_06_15_pus_map.win ! wwins: Wrote 1 windows to J0414+053A_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00540062 Jy ! Component: 100 - total flux cleaned = 0.0125975 Jy ! Component: 150 - total flux cleaned = 0.0181207 Jy ! Component: 200 - total flux cleaned = 0.0229543 Jy ! Component: 250 - total flux cleaned = 0.026029 Jy ! Component: 300 - total flux cleaned = 0.0289647 Jy ! Component: 350 - total flux cleaned = 0.0321327 Jy ! Component: 400 - total flux cleaned = 0.0351881 Jy ! Component: 450 - total flux cleaned = 0.0365105 Jy ! Component: 500 - total flux cleaned = 0.0384477 Jy ! Component: 550 - total flux cleaned = 0.0406396 Jy ! Component: 600 - total flux cleaned = 0.0415587 Jy ! Component: 650 - total flux cleaned = 0.0436416 Jy ! Component: 700 - total flux cleaned = 0.0456654 Jy ! Component: 750 - total flux cleaned = 0.0482058 Jy ! Component: 800 - total flux cleaned = 0.0498649 Jy ! Component: 850 - total flux cleaned = 0.0517652 Jy ! Component: 900 - total flux cleaned = 0.05336 Jy ! Component: 950 - total flux cleaned = 0.0554403 Jy ! Component: 1000 - total flux cleaned = 0.0562079 Jy ! Component: 1050 - total flux cleaned = 0.0587135 Jy ! Component: 1100 - total flux cleaned = 0.0606829 Jy ! Component: 1150 - total flux cleaned = 0.0630971 Jy ! Component: 1200 - total flux cleaned = 0.0645226 Jy ! Component: 1250 - total flux cleaned = 0.0668565 Jy ! Component: 1300 - total flux cleaned = 0.0686906 Jy ! Component: 1350 - total flux cleaned = 0.0707233 Jy ! Component: 1400 - total flux cleaned = 0.0727286 Jy ! Component: 1450 - total flux cleaned = 0.0749278 Jy ! Component: 1500 - total flux cleaned = 0.0773059 Jy ! Component: 1550 - total flux cleaned = 0.0800779 Jy ! Component: 1600 - total flux cleaned = 0.0823883 Jy ! Component: 1650 - total flux cleaned = 0.0844602 Jy ! Component: 1700 - total flux cleaned = 0.0867065 Jy ! Component: 1750 - total flux cleaned = 0.0883245 Jy ! Component: 1800 - total flux cleaned = 0.0911113 Jy ! Component: 1850 - total flux cleaned = 0.0930776 Jy ! Component: 1900 - total flux cleaned = 0.0952084 Jy ! Component: 1950 - total flux cleaned = 0.0965456 Jy ! Component: 2000 - total flux cleaned = 0.0982497 Jy ! Component: 2050 - total flux cleaned = 0.0995606 Jy ! Component: 2100 - total flux cleaned = 0.101409 Jy ! Component: 2150 - total flux cleaned = 0.102507 Jy ! Component: 2200 - total flux cleaned = 0.104134 Jy ! Component: 2250 - total flux cleaned = 0.105565 Jy ! Component: 2300 - total flux cleaned = 0.107156 Jy ! Component: 2350 - total flux cleaned = 0.108909 Jy ! Component: 2400 - total flux cleaned = 0.110122 Jy ! Component: 2450 - total flux cleaned = 0.112012 Jy ! Component: 2500 - total flux cleaned = 0.113034 Jy ! Component: 2550 - total flux cleaned = 0.114046 Jy ! Component: 2600 - total flux cleaned = 0.115551 Jy ! Component: 2650 - total flux cleaned = 0.117539 Jy ! Component: 2700 - total flux cleaned = 0.118851 Jy ! Component: 2750 - total flux cleaned = 0.119988 Jy ! Component: 2800 - total flux cleaned = 0.120473 Jy ! Component: 2850 - total flux cleaned = 0.121915 Jy ! Component: 2900 - total flux cleaned = 0.123185 Jy ! Component: 2950 - total flux cleaned = 0.124915 Jy ! Component: 3000 - total flux cleaned = 0.125381 Jy ! Component: 3050 - total flux cleaned = 0.126155 Jy ! Component: 3100 - total flux cleaned = 0.127231 Jy ! Component: 3150 - total flux cleaned = 0.12845 Jy ! Component: 3200 - total flux cleaned = 0.129055 Jy ! Component: 3250 - total flux cleaned = 0.130859 Jy ! Component: 3300 - total flux cleaned = 0.131603 Jy ! Component: 3350 - total flux cleaned = 0.132786 Jy ! Component: 3400 - total flux cleaned = 0.13352 Jy ! Component: 3450 - total flux cleaned = 0.134249 Jy ! Component: 3500 - total flux cleaned = 0.13584 Jy ! Component: 3550 - total flux cleaned = 0.136413 Jy ! Component: 3600 - total flux cleaned = 0.137554 Jy ! Component: 3650 - total flux cleaned = 0.139111 Jy ! Component: 3700 - total flux cleaned = 0.140094 Jy ! Component: 3750 - total flux cleaned = 0.14107 Jy ! Component: 3800 - total flux cleaned = 0.141625 Jy ! Component: 3850 - total flux cleaned = 0.143551 Jy ! Component: 3900 - total flux cleaned = 0.144234 Jy ! Component: 3950 - total flux cleaned = 0.14505 Jy ! Component: 4000 - total flux cleaned = 0.145859 Jy ! Component: 4050 - total flux cleaned = 0.146797 Jy ! Total flux subtracted in 4096 components = 0.148126 Jy ! Clean residual min=-0.007529 max=0.009182 Jy/beam ! Clean residual mean=0.000017 rms=0.002731 Jy/beam ! Combined flux in latest and established models = 0.350836 Jy keep ! Adding 430 model components to the UV plane model. ! The established model now contains 478 components and 0.350837 Jy ![Exited script file: muppet] wmap "J0414+053A_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 8.517 at -4.191 degrees (North through East) ! Clean map min=-0.025999 max=0.14396 Jy/beam ! Writing clean map to FITS file: J0414+053A_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143962 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00268238 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.58977 5.58977 11.1795 22.3591 44.7182 89.4363 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.366 x 8.517 at -4.191 degrees (North through East) ! Clean map min=-0.025999 max=0.14396 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0414+053A_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:11:09 2019